I tried to build my project in eclipse mars using CDT editor it shows error in makefile. I am very new to handle makefile, I have attached 2 images what I saw in project explorer.
When I try to build my project it shows error
1.mingw32-make.exe: *** [build/driver] Error 1
2.recipe for target 'build/driver' failed Makefile
Need help to resolve this error.
Related
When I try to build in vs22, it gives me an error that it cannot find some DLLs that have been added. But on VS19 the build works without problems.
I tried to change the build settings but no luck.
Error :
Severity Code Description Project File Line Suppression State Error CS0006 Metadata file 'C:\xxxx\xxx\xxx\xxx.CMS.Service\bin\Debug\xx.CMS.Service.dll' could not be found xx.CMS.Frontend C:\xxx\xxx\xxx\xx.CMS.Frontend\CSC 1 Active
I am having some issues when importing my fresh cubeMX project into VisualGDB. I get tonnes of errors that say:
undefined reference to 'vPortFree' (for example)
Steps taken:
Generate project files in CubeMX using "Other toolchain"
Then in VS, create project using Embedded Visual GDB and mostly following default steps. I am following this process exactly. https://www.youtube.com/watch?v=XY4I0Nq6IGc
Once the project is created I try built it, but I get these errors:
Severity Description Project File Line
Error undefined reference to `vPortFree' stm32nucleof429zi_freertos_tcpip C:\Repos\stm32nucleof429zi_freertos_tcpip.git\stm32nucleof429zi_freertos_tcpip.git\Middlewares\Third_Party\FreeRTOS\Source\tasks.c 3920
Error undefined reference to `vPortFree' stm32nucleof429zi_freertos_tcpip C:\Repos\stm32nucleof429zi_freertos_tcpip.git\stm32nucleof429zi_freertos_tcpip.git\Middlewares\Third_Party\FreeRTOS\Source\tasks.c 3921
Error undefined reference to `vPortFree' stm32nucleof429zi_freertos_tcpip C:\Repos\stm32nucleof429zi_freertos_tcpip.git\stm32nucleof429zi_freertos_tcpip.git\Middlewares\Third_Party\FreeRTOS\Source\tasks.c 3927
Error Build failed: arm-none-eabi-g++.exe exited with code 1 stm32nucleof429zi_freertos_tcpip 1
Error ld returned 1 exit status stm32nucleof429zi_freertos_tcpip C:\Repos\stm32nucleof429zi_freertos_tcpip.git\stm32nucleof429zi_freertos_tcpip.git\collect2.exe 0
When I right click on main.c however and compile, the project compiles without fault. Its when using the build tool and debugger that these errors come up.
Ive never had this problem before when importing projects. Any help would be greatly appreciated
Thank you
After playing with configurations for some time I found the issues. The toolchain file that CubeMx created does not tell the linker to include all the files required for FreeRTOS to compile.
This issue is only relevant if you are using CMSIS_RTOS_V2 and the following steps fixed it for me:
Add CMSIS_RTOS_V2 to the project space by going to:
Add missing includes:
Go to: Project->VisualGDP Project Properties->MS build settings->Include directories and add the folder CMSIS_RTOS_V2 to the file path
To resolve the unidentified reference ‘pvPortMalloc’ error:
Within the VS in the Solution Explorer window: Click on "Show all files". This is a little icon/tab at the top of the solution explorer. Navigate to: C:\...Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang. Right click on heap_4.c and include it in the project
https://sysprogs.com/w/forums/topic/error-undefined-reference-to-pvportmalloc-and-vportfree/
I am adding performance counter's manifest file to an existing project, and I configure the compile tool of manifest to be CTRPP. But when I compile it,
VS2013 reports that error:File not found and error:CTRPP failed, error code is -2147024894.
I searched online but cannot find any documents which can me the meaning of the error code. The manifest file is generated by ecmangen.exe, and it works well when I created a new project and compile it in the new project.
I have to automate the way we build and deploy our SSIS projects.
We use VS2013, SQLSERVER2014 and TFS2015. I'm already aware of two solutions:
1) MSBuild: I followed this blog https://speaksql.wordpress.com/2013/06/07/a-journey-to-db-deployment-automaton-ssis-build-using-msbuild/ and it works fine for VS2010 but unfortunately not for VS2013.
The error I'm getting is:
Project "SSISTest\SSISTest\SSIS.MSBuild.proj" on node 1 (SSISBuild target(s)).
SSISBuild:**************Building SSIS project: ..\SSISTest\SSISTest.dtproj for onfiguration: Development**************
------
Loading project file '..\SSISTest\SSISTest.dtproj'
Setting output directory to '..\SSISTest\bin\Development'
Setting project ProtectionLevel to 'DontSaveSensitive'
Loading package '..\SSISTest\Package.dtsx'
error : Error while loading package '..\SSISTest\Package.dtsx': The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.\r
error :
error : The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.\r
error : \r
error : at Microsoft.SqlServer.Dts.Runtime.Package.LoadFromXML(String packageXml, IDTSEvents events)\r
error : at Microsoft.SqlServer.IntegrationServices.Build.DeploymentFileCompilerTask.LoadPackage(String path)\r
error : at Microsoft.SqlServer.IntegrationServices.Build.DeploymentFileCompilerTask.Execute()
Done Building Project "SSISTest\SSISTest\SSIS.MSBuild.proj" (SSISBuild target(s)) -- FAILED.
2) devenv: works fine but our projects are all protected with a password, and everytime you try to build it prompts the dialog to insert the password.
Is there any other way I can automate this in VS2013?
I'll answer myself. After adding the proper dll references (expecially the Microsoft.SqlServer.ManageDTS one) for VS2013 to the http://sqlsrvintegrationsrv.codeplex.com/SourceControl/latest project, generating the .dll allowing MSBuild to build SSIS project as suggested by https://speaksql.wordpress.com/2013/06/07/a-journey-to-db-deployment-automaton-ssis-build-using-msbuild/, worked just fine. I'm now able to automatically build SSIS projects with MSBuild and deploy them to a SQL Server 2014 instance.
I have a solution that I am trying to build in Visual Studio which gives the following error.
Project : error PRJ0019: A tool returned an error code from "Copy the executable to HAMR platform"
The last few lines of the build log are as follows:
Copy the executable to HAMR platform
The system cannot find the path specified.
Project : error PRJ0019: A tool returned an error code from "Copy the executable to HAMR platform"
I understand that there may be a wrong path mentioned in the code but as there is no line number to the error I don't know how to detect the source of the problem
It looks like a Post build error.
Go to Project Properties => Build Event =>Post-Build Event.
Check the command line values.
I guess you are trying to copy the source file which does not exist on the mentioned path.
Please check your output file is getting copied to the expected path or not.
It's not a source code error. It's a build step error. Right click on the project, go to settings, and check the "Build Events" tab.