How I can convert string -
text = "test test1 \n \n \n \n \n \n \n \n \n \n \n \n \n \n test2 \n"
to
test test1 \n\n\n\n\n\n\n\n\n\n\n\n\n\n test2\n
I tried use next - text.gsub(/\s\n/, '\n'), but it added additional slash -
test test1\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n test2\\n
Use double quotes, instead of single:
text.gsub(/\s\n/, "\n")
With single quotes, \n has the meaning of \ and n, one after another. With double, it is interpreted as new line.
I expect that either the space after "test1" is to be removed as well or the space after "test2" is not to be removed. #ndn assumed the former was intended. If the second interpretation applies, you could do the following:
r = /
(?<=\n) # match \n in a positive lookbehind
\s # match a whitespace character
(?=\n) # match \n in a positive lookahead
/x # extended/free-spacing regex definition mode
text.gsub(r,"")
#=> "test test1 \n\n\n\n\n\n\n\n\n\n\n\n\n\n test2 \n"
or:
text.gsub(/\n\s(?=\n)/, "\n")
Related
I don't understand this Ruby code:
>> puts '\\ <- single backslash'
# \ <- single backslash
>> puts '\\ <- 2x a, because 2 backslashes get replaced'.sub(/\\/, 'aa')
# aa <- 2x a, because two backslashes get replaced
so far, all as expected. but if we search for 1 with /\\/, and replace with 2, encoded by '\\\\', why do we get this:
>> puts '\\ <- only 1 ... replace 1 with 2'.sub(/\\/, '\\\\')
# \ <- only 1 backslash, even though we replace 1 with 2
and then, when we encode 3 with '\\\\\\', we only get 2:
>> puts '\\ <- only 2 ... 1 with 3'.sub(/\\/, '\\\\\\')
# \\ <- 2 backslashes, even though we replace 1 with 3
anyone able to understand why a backslash gets swallowed in the replacement string? this happens on 1.8 and 1.9.
Quick Answer
If you want to sidestep all this confusion, use the much less confusing block syntax. Here is an example that replaces each backslash with 2 backslashes:
"some\\path".gsub('\\') { '\\\\' }
Gruesome Details
The problem is that when using sub (and gsub), without a block, ruby interprets special character sequences in the replacement parameter. Unfortunately, sub uses the backslash as the escape character for these:
\& (the entire regex)
\+ (the last group)
\` (pre-match string)
\' (post-match string)
\0 (same as \&)
\1 (first captured group)
\2 (second captured group)
\\ (a backslash)
Like any escaping, this creates an obvious problem. If you want include the literal value of one of the above sequences (e.g. \1) in the output string you have to escape it. So, to get Hello \1, you need the replacement string to be Hello \\1. And to represent this as a string literal in Ruby, you have to escape those backslashes again like this: "Hello \\\\1"
So, there are two different escaping passes. The first one takes the string literal and creates the internal string value. The second takes that internal string value and replaces the sequences above with the matching data.
If a backslash is not followed by a character that matches one of the above sequences, then the backslash (and character that follows) will pass through unaltered. This is also affects a backslash at the end of the string -- it will pass through unaltered. It's easiest to see this logic in the rubinius code; just look for the to_sub_replacement method in the String class.
Here are some examples of how String#sub is parsing the replacement string:
1 backslash \ (which has a string literal of "\\")
Passes through unaltered because the backslash is at the end of the string and has no characters after it.
Result: \
2 backslashes \\ (which have a string literal of "\\\\")
The pair of backslashes match the escaped backslash sequence (see \\ above) and gets converted into a single backslash.
Result: \
3 backslashes \\\ (which have a string literal of "\\\\\\")
The first two backslashes match the \\ sequence and get converted to a single backslash. Then the final backslash is at the end of the string so it passes through unaltered.
Result: \\
4 backslashes \\\\ (which have a string literal of "\\\\\\\\")
Two pairs of backslashes each match the \\ sequence and get converted to a single backslash.
Result: \\
2 backslashes with character in the middle \a\ (which have a string literal of "\\a\\")
The \a does not match any of the escape sequences so it is allowed to pass through unaltered. The trailing backslash is also allowed through.
Result: \a\
Note: The same result could be obtained from: \\a\\ (with the literal string: "\\\\a\\\\")
In hindsight, this could have been less confusing if String#sub had used a different escape character. Then there wouldn't be the need to double escape all the backslashes.
This is an issue because backslash (\) serves as an escape character for Regexps and Strings. You could do use the special variable \& to reduce the number backslashes in the gsub replacement string.
foo.gsub(/\\/,'\&\&\&') #for some string foo replace each \ with \\\
EDIT: I should mention that the value of \& is from a Regexp match, in this case a single backslash.
Also, I thought that there was a special way to create a string that disabled the escape character, but apparently not. None of these will produce two slashes:
puts "\\"
puts '\\'
puts %q{\\}
puts %Q{\\}
puts """\\"""
puts '''\\'''
puts <<EOF
\\
EOF
argh, right after I typed all this out, I realised that \ is used to refer to groups in the replacement string. I guess this means that you need a literal \\ in the replacement string to get one replaced \. To get a literal \\ you need four \s, so to replace one with two you actually need eight(!).
# Double every occurrence of \. There's eight backslashes on the right there!
>> puts '\\'.sub(/\\/, '\\\\\\\\')
anything I'm missing? any more efficient ways?
Clearing up a little confusion on the author's second line of code.
You said:
>> puts '\\ <- 2x a, because 2 backslashes get replaced'.sub(/\\/, 'aa')
# aa <- 2x a, because two backslashes get replaced
2 backslashes aren't getting replaced here. You're replacing 1 escaped backslash with two a's ('aa'). That is, if you used .sub(/\\/, 'a'), you would only see one 'a'
'\\'.sub(/\\/, 'anything') #=> anything
the pickaxe book mentions this exact problem, actually. here's another alternative (from page 130 of the latest edition)
str = 'a\b\c' # => "a\b\c"
str.gsub(/\\/) { '\\\\' } # => "a\\b\\c"
I'm trying to do a regex with lookbehind that changes \n to but not if it's a \\n.
My closest attempt has no effect:
text.gsub /(?<!\\)\n/, ''
Unfortunately, no number of backslashes in the lookbehind seem to fix the problem. How can I address this?
You need to double the backslash before the n in the regex, otherwise it's looking for a newline instead of a literal backslash followed by n:
irb(main):001:0> puts "hello\\nthere\\\\n".gsub(/(?<!\\)\\n/, ' ')
hello there\\n
You don't need anything special. "\n" is a single character. It does not include a "\" or "n" character.
text.gsub(/\n/, "")
But instead of that, you should do:
text.gsub("\n", "")
or
text.tr("\n", "")
But I would do:
text.tr($/, "")
element on the page has needed content that i'm trying to pull
here's the element.content after a parse with Nokogiri
["\n \n \n \n itemId[0]=1234;\n \n \n \n \n \n \n \n My Project: First Edition\n \n ", "\n \n \n \n itemId[1]=2345;\n \n \n \n \n \n \n \n My Second Edition\n \n ", "\n \n \n \n itemId[2]=1234;\n \n \n \n \n \n \n \n Third\n \n \n"]
I was able to get the RegEx for the itemId[0]=1234 which is (/itemId.\d+..\d{4}/) but I'm totally stuck on how to grab the names of the content. Any advice? Perhaps I can just parse with Ruby through HTML?
Given a string like this:
s= "\n \n \n \n itemId[0]=1234;\n \n \n \n \n \n \n \n My Project: First Edition\n \n "
You could do this:
m = s.match(/(itemId\[\d+\]=\d+);(.*)/m)
item = m[1]
# itemId[0]=1234
name = m[2].strip
# My Project: First Edition
Basically you pull out the itemId... part using (more or less) or existing expression, grab the rest of the string ((.*)) in multi-line mode (/m, so that . matches a newline), and then strip off the offending whitespace outside the regex using strip. You don't have to build one unreadable regex that does everything you need, post-processing a match result is allowed and sometimes even encouraged.
I suggest you use split to find all non-empty lines.
str.split(/\s*\n\s*/)
should do the trick.
Why doesn't this code work:
"hello \nworld".each_line(separator = '\n') {|s| p s}
while this works?
"hello \nworld".each_line(separator = $/) {|s| p s}
A 10 second google yielded this:
$/ is the input record separator, newline by default.
The first one doesn't work because you used single quotes. Backslash escape sequences are ignored in single quoted strings. Use double quotes instead:
"hello \nworld".each_line(separator = "\n") {|s| p s}
First, newline is the default. All you need is
"hello \nworld".each_line {|s| p s}
Secondly, single quotes behave differently than double quotes. '\n' means a literal backslash followed by the letter n, whereas "\n" means the newline character.
Last, the special variable $/ is the record separator which is "\n" by default, which is why you don't need to specify the separator in the above example.
Simple gsub! your string with valid "\n" new line character:
text = 'hello \nworld'
text.gsub!('\n', "\n")
After that \n character will act like newline character.
I don't understand this Ruby code:
>> puts '\\ <- single backslash'
# \ <- single backslash
>> puts '\\ <- 2x a, because 2 backslashes get replaced'.sub(/\\/, 'aa')
# aa <- 2x a, because two backslashes get replaced
so far, all as expected. but if we search for 1 with /\\/, and replace with 2, encoded by '\\\\', why do we get this:
>> puts '\\ <- only 1 ... replace 1 with 2'.sub(/\\/, '\\\\')
# \ <- only 1 backslash, even though we replace 1 with 2
and then, when we encode 3 with '\\\\\\', we only get 2:
>> puts '\\ <- only 2 ... 1 with 3'.sub(/\\/, '\\\\\\')
# \\ <- 2 backslashes, even though we replace 1 with 3
anyone able to understand why a backslash gets swallowed in the replacement string? this happens on 1.8 and 1.9.
Quick Answer
If you want to sidestep all this confusion, use the much less confusing block syntax. Here is an example that replaces each backslash with 2 backslashes:
"some\\path".gsub('\\') { '\\\\' }
Gruesome Details
The problem is that when using sub (and gsub), without a block, ruby interprets special character sequences in the replacement parameter. Unfortunately, sub uses the backslash as the escape character for these:
\& (the entire regex)
\+ (the last group)
\` (pre-match string)
\' (post-match string)
\0 (same as \&)
\1 (first captured group)
\2 (second captured group)
\\ (a backslash)
Like any escaping, this creates an obvious problem. If you want include the literal value of one of the above sequences (e.g. \1) in the output string you have to escape it. So, to get Hello \1, you need the replacement string to be Hello \\1. And to represent this as a string literal in Ruby, you have to escape those backslashes again like this: "Hello \\\\1"
So, there are two different escaping passes. The first one takes the string literal and creates the internal string value. The second takes that internal string value and replaces the sequences above with the matching data.
If a backslash is not followed by a character that matches one of the above sequences, then the backslash (and character that follows) will pass through unaltered. This is also affects a backslash at the end of the string -- it will pass through unaltered. It's easiest to see this logic in the rubinius code; just look for the to_sub_replacement method in the String class.
Here are some examples of how String#sub is parsing the replacement string:
1 backslash \ (which has a string literal of "\\")
Passes through unaltered because the backslash is at the end of the string and has no characters after it.
Result: \
2 backslashes \\ (which have a string literal of "\\\\")
The pair of backslashes match the escaped backslash sequence (see \\ above) and gets converted into a single backslash.
Result: \
3 backslashes \\\ (which have a string literal of "\\\\\\")
The first two backslashes match the \\ sequence and get converted to a single backslash. Then the final backslash is at the end of the string so it passes through unaltered.
Result: \\
4 backslashes \\\\ (which have a string literal of "\\\\\\\\")
Two pairs of backslashes each match the \\ sequence and get converted to a single backslash.
Result: \\
2 backslashes with character in the middle \a\ (which have a string literal of "\\a\\")
The \a does not match any of the escape sequences so it is allowed to pass through unaltered. The trailing backslash is also allowed through.
Result: \a\
Note: The same result could be obtained from: \\a\\ (with the literal string: "\\\\a\\\\")
In hindsight, this could have been less confusing if String#sub had used a different escape character. Then there wouldn't be the need to double escape all the backslashes.
This is an issue because backslash (\) serves as an escape character for Regexps and Strings. You could do use the special variable \& to reduce the number backslashes in the gsub replacement string.
foo.gsub(/\\/,'\&\&\&') #for some string foo replace each \ with \\\
EDIT: I should mention that the value of \& is from a Regexp match, in this case a single backslash.
Also, I thought that there was a special way to create a string that disabled the escape character, but apparently not. None of these will produce two slashes:
puts "\\"
puts '\\'
puts %q{\\}
puts %Q{\\}
puts """\\"""
puts '''\\'''
puts <<EOF
\\
EOF
argh, right after I typed all this out, I realised that \ is used to refer to groups in the replacement string. I guess this means that you need a literal \\ in the replacement string to get one replaced \. To get a literal \\ you need four \s, so to replace one with two you actually need eight(!).
# Double every occurrence of \. There's eight backslashes on the right there!
>> puts '\\'.sub(/\\/, '\\\\\\\\')
anything I'm missing? any more efficient ways?
Clearing up a little confusion on the author's second line of code.
You said:
>> puts '\\ <- 2x a, because 2 backslashes get replaced'.sub(/\\/, 'aa')
# aa <- 2x a, because two backslashes get replaced
2 backslashes aren't getting replaced here. You're replacing 1 escaped backslash with two a's ('aa'). That is, if you used .sub(/\\/, 'a'), you would only see one 'a'
'\\'.sub(/\\/, 'anything') #=> anything
the pickaxe book mentions this exact problem, actually. here's another alternative (from page 130 of the latest edition)
str = 'a\b\c' # => "a\b\c"
str.gsub(/\\/) { '\\\\' } # => "a\\b\\c"