in my project, i have to show 100+ same report with title, description and list. i want to create one rdlc file and set title, description and list datasource (i can not predefine column numbers and types. it will be defined at runtime).
i solve my problem by that example : http://www.gotreportviewer.com/ but should extent this project. because my reports have a title and description than i create subreport and create rdlc file at runtime and set subreport datasource. sory my bad english.
Related
I'm new to Stack overflow and new to SSRS report building. I'm currently building a report that needs to display each option from and option set in a different column I also need to pull date a last and next date range for each option it is page grouped by a company name and then further grouped by the employee's full name. any help would be very much appreciated.
Excel mock-up
Report table layout
I need it to out put like the Excel image ideally if possible, I've found the value id's but i'm stumped as to how if I can at all display them in the columns I've labelled.
It looks like you need to use a matrix control in your report. It will display your values in a pivot view like Excel.
Microsoft Documentation
I've been reading Telerik's documentation and I'm not sure if this is possible: I'm being asked to add tables to a report at run time, without doing so programmatically. A query is run that fetches hierarchical data, and the report owner would like to add a new table to the report for each member of the topmost parent, so that each topmost parent has their own table, with a text box title on top of the table containing the parent's name, in the following pattern:
TopParent1
[Parent1's table]
TopParent2
[Parent2's table]
...
Does anyone know how I could go about doing that without doing so programmatically? Every example and/or bit of documentation I've seen pertains to programmatically adding tables.
It is possible to add tables to a report at run time, without doing
so programmatically?
R: It's not possible to add table with out saying programmatically : the size of each element , the exact position , etc .. .. ..
HowTo create a 'hierachical' report with conditional display ?
1/. Hierachical Report.
Read the telerik official tutorial on How to: Create a Master-Detail Report Using a SubReport Item
Using the SubReport report item you can display one report within another report. The data for each SubReport can be completely different.
But You can achiev Parent/chield relation by Passing Parameters to a SubReport.
/!\ Caution /!\
Page sections are not related to the report itself, but are relative to the paper or screen. Thus page sections of nested/detail reports are ignored and only the page sections of the main report are visible.
In order to have sections that repeat on every page similar to page sections, consider using an unbound group (no grouping criteria specified) and set the PrintOnEveryPage property of its sections to True. Be aware that you cannot use PageCount and PageNumber global objects in group sections.
2/. Conditional Display
You will need to hide Report if subreport have no result.
If you want the user to choose if he want some sub report.
You can do it by passing parameter from your calling application to your report constructor.
And use Something like a Bitfield or an enum to choose what to display.
And What about a C# controler in the master report code behind ?
public myReportConstructor(int SubreportToDisplay)
{
InitializeComponent();
Hiden_Display(SubreportToDisplay);
}
private void Hiden_Display(int _code)
{
if ((_code & (int)myEnum.InfoClient) != (int)myEnum.InfoClient)
HideNShrink(SUBREPORT_CLIENT);
if ((_code & (int)myEnum.Item) != (int)myEnum.Item)
{
HideNShrink(SUBREPORT_Product.Item1);
HideNShrink(SUBREPORT_Product.ItemTWO);
}
}
private void HideNShrink(ReportItem target)
{// http://www.telerik.com/support/kb/reporting/details/collapse-the-container-when-hiding-child-report-items-
target.Visible = false;
target.Height = Telerik.Reporting.Drawing.Unit.Pixel(1);
}
I use a little trick here in my designer every subreport item is set to public:
private Telerik.Reporting.TextBox textBox17;
public Telerik.Reporting.SubReport SubReport_Client;
public Sub_Client sub_CLI1;
When hidding Client I will use the SubReport_Client.
That is the SubReport item, the container of my SubReport Sub_Client ;
(Yes they name the container and the containt are the same name, thats confusing at First, but it's Vs/Telerik choice)
When hidding a Sub Report That is in an other Sub Report.
I use the ContaintSubReport, Container of the nested-nested SubReport.
like: sub_CLI1.nested-nested_SubReport
I was able to answer my own question as follows:
Create two blank reports.
On the report chosen to use for the detail report, remove the report header and footer.
Add data source and parameter/s to the detail report (in my case, an SQL data source) and set report data source to the data source created here.
Add group to report with the value of groupings set to the top-most result in query bound to report. (Groupings = Fields.Parent)
Create text box with the value set to the field for the top result (textbox1.Value = Fields.Parent) or use data explorer to drag and drop Fields.Parent into the group header.
Create text boxes to mimic table column heads (one text box for each title of the columns) and place them into the group header with the text box containing the topmost result (or Fields.Parent).
Drag or create text fields for the rest of the fields in the query (Fields.Child1, Fields.Child2, Fields.Child3, etc) in the detail section of the report, aligned vertically with their column header. Preview the report--it should contain a table-like structure that repeats on each top result.
Switch to other report.
Add same parameter/s to that report.
Add subreport item to the detail section of that report.
Set subreport report source to Type and report document, then select the name of the detail report (the first one created here).
Set parameter/s for subreport to the same parameter/s used in the subreport.
Using that, I was able to essentially add a table per item in the first column of the query. The report created first serves as a wrapper for the query, and because it's being placed in the other report as a subreport item with the grouping I created, it is allowed to repeat as much as it needs to in order to display all the rows in the query.
I used the Telerik documentation for master-detail reports and report structures for this.
I have a report, and a linked subreport. The subreport is linked on a field on the main report.
A field in the main report should link to the subreport at run-time, but when I run it, keep on getting the prompt "Enter parameter values".
The field in the main report is linked to the subreport using the automatic parameter name in the subreport, and have the "select data in the subreport based on field" checked, and the corresponding field in the subreport (shown in the attachment).
I am using Crystal for VS 2013.
This is a winform application.
What am I missing?
I seemed to have the same issue under the same parameters you described. Moreover, while debugging, the winforms app would throw a COM exception. Context switching between VS and the report would reveal the prompt for the subreport parameters (which should have been linked).
An hour of exploring and trial-and-error later, here is how I managed to resolve the issue in VS2013:
On your main report, right-click the subreport and select 'Change Subreport Links...'
Ensure that you have the correct subreport selected, the move across any missing parameters from the 'Available fields' box
For each item you move across, ensure that you have the correct subreport parameter selected in the 'Subreport parameters field to use' drop down list. For parameters, this will generally take the form '?#ParamName'
That got the report working for me again. I hope you have some luck with it!
I am creating a report template for an oracle apex application. I created a custom tag such as #TITLE#, when I run my report the data does not show up, it just shows #TITLE#. To be more specific here is my code.
Report Template (Column Template 1)
<td#ALIGNMENT# headers="#COLUMN_HEADER_NAME#" class="data">#TITLE#</td>
So in my Column Template 1 the custom tag #TITLE# is where I want my data from the query to be placed. This is my query
SELECT f.filename AS TITLE
FROM files f
In my report I have selected my custom report template. I know I am probably missing some configuration checkbox to make the data recognize the custom tag.
In APEX there are 2 kinds of report template: column template and row template.
You need the row template version but have picked the column template version, which only allows the generic #COLUMN_VALUE# rather than specific named columns.
This seems like a simple question but I cannot find anything on adding a tablix control to an SSRS report.
I don't see this control in the toolbox in bids or in report builder 3.0.
I'm using SSRS 2008 R2.
Can someone kindly tell me how to add this control to a report?
I found the answer here:
The table, matrix, and list data regions are represented on the ribbon by templates for the underlying tablix data region. When you add one of these templates to a report, you are actually adding a tablix data region that is optimized for a specific data layout. By default, a table template displays detail data in a grid layout, a matrix displays group data in a grid layout, and a list displays detail data in a free-form layout.
Could it be any more unintuitive?