How can i get only special strings (by condition) from file? - bash

I have a huge text file with strings of a special format. How can i quickly create another file with only strings corresponding to my condition?
for example, file contents:
[2/Nov/2015][rule="myRule"]"GET
http://uselesssotialnetwork.com/picturewithcat.jpg"
[2/Nov/2015][rule="mySecondRule"]"GET
http://anotheruselesssotialnetwork.com/picturewithdog.jpg"
[2/Nov/2015][rule="myRule"]"GET
http://uselesssotialnetwork.com/picturewithzombie.jpg"
and i only need string with "myRule" and "cat"?
I think it should be perl, or bash, but it doesn't matter.
Thanks a lot, sorry for noob question.

Is it correct, that each entry is two lines long? Then you can use sed:
sed -n '/myRule/ {N }; /myRule.*cat/ {p}'
the first rule appends the nextline to patternspace when myRule matches
the second rule tries to match myRule followed by a cat in the patternspace , if found it prints patternspace

If your file is truly huge to the extent that it won't fit in memory (although files up to a few gigabytes are fine in modern computer systems) then the only way is to either change the record separator or to read the lines in pairs
This shows the first way, and assumes that the second line of every pair ends with a double quote followed by a newline
perl -ne'BEGIN{$/ = qq{"\n}} print if /myRule/ and /cat/' huge_file.txt
and this is the second
perl -ne'$_ .= <>; print if /myRule/ and /cat/' huge_file.txt
When given your sample data as input, both methods produce this output
[2/Nov/2015][rule="myRule"]"GET
http://uselesssotialnetwork.com/picturewithcat.jpg"

Related

Appending a count to a code in multiple files and saving the result

I'm looking for a bit of help here. I'm a complete newbie!
I need to look in a file for a code matching the pattern A00000_00_A and append a count to it, so the first time it appears it is replaced with A00000_00_A_001, second time A00000_00_A_002 etc. The output needs to be written back to the same file. Each file only contains 1 code, but it appears multiple times.
After some digging I have found-
perl -pi -e 's/Q\d{4,5}'_'\d{2}_./$&.'_'.++$A /ge' /users/documents/*.xml
but the issue is the counter does not reset in each file.
That is, the output of the first file is say Q00390_01_A_1 to Q00390_01_A_7, while the second file is Q00391_01_A_8 to Q00391_01_A_10.
What I want is Q00390_01_A_1 to Q00390_01_A_7 in the first file and Q00391_01_A_1 to Q00391_01_A_2 in the second.
Does anyone have any idea on how to edit the above code to make it do that? I'm a total newbie so ideally an edit to what I have would be brilliant. Thanks
cd /users/documents/
for f in *.xml;do
perl -pi -e 's/facs=.(Q|M)\d{4,5}_\d{2}_\w/$&._.sprintf("%04d",++$A) /ge' $f
done
This matches the string facs= and any character, then "Q" or "M" followed by either four or five digits, then an underscore, then two digits, another underscore, and a word character. The entire match is then concatenated with an underscore and the value of $A zero padded to four digits.

extract data between similar patterns

I am trying to use sed to print the contents between two patterns including the first one. I was using this answer as a source.
My file looks like this:
>item_1
abcabcabacabcabcabcabcabacabcabcabcabcabacabcabc
>item_2
bcdbcdbcdbcdbbcdbcdbcdbcdbbcdbcdbcdbcdbbcdbcdbcdbcdbbcdbcdbcdbcdb
>item_3
cdecde
>item_4
defdefdefdefdefdefdef
I want it to start searching from item_2 (and include) and finish at next occuring > (not include). So my code is sed -n '/item_2/,/>/{/>/!p;}'.
The result wanted is:
item_2
bcdbcdbcdbcdbbcdbcdbcdbcdbbcdbcdbcdbcdbbcdbcdbcdbcdbbcdbcdbcdbcdb
but I get it without item_2.
Any ideas?
Using awk, split input by >s and print part(s) matching item_2.
$ awk 'BEGIN{RS=">";ORS=""} /item_2/' file
item_2
bcdbcdbcdbcdbbcdbcdbcdbcdbbcdbcdbcdbcdbbcdbcdbcdbcdbbcdbcdbcdbcdb
I would go for the awk method suggested by oguz for its simplicity. Now if you are interested in a sed way, out of curiosity, you could fix what you have already tried with a minor change :
sed -n '/^>item_2/ s/.// ; //,/>/ { />/! p }' input_file
The empty regex // recalls the previous regex, which is handy here to avoid duplicating /item_2/. But keep in mind that // is actually dynamic, it recalls the latest regex evaluated at runtime, which is not necessarily the closest regex on its left (although it's often the case). Depending on the program flow (branching, address range), the content of the same // can change and... actually here we have an interesting example ! (and I'm not saying that because it's my baby ^^)
On a line where /^>item_2/ matches, the s/.// command is executed and the latest regex before // becomes /./, so the following address range is equivalent to /./,/>/.
On a line where /^>item_2/ does not match, the latest regex before // is /^>item_2/ so the range is equivalent to /^>item_2/,/>/.
To avoid confusion here as the effect of // changes during execution, it's important to note that an address range evaluates only its left side when not triggered and only its right side when triggered.
This might work for you (GNU sed):
sed -n ':a;/^>item_2/{s/.//;:b;p;n;/^>/!bb;ba}' file
Turn off implicit printing -n.
If a line begins >item_2, remove the first character, print the line and fetch the next line
If that line does not begins with a >, repeat the last two instructions.
Otherwise, repeat the whole set of instructions.
If there will always be only one line following >item_2, then:
sed '/^>item_2/!d;s/.//;n' file

Sed keep original indentation and camel-casing a variable

I have a simple sed script and I am replacing a bunch of lines in my application dynamically with a variable, the variable is a list of strings.My function works but does not keep the original indentation.the function deletes the line if it contains the certain string and replaces the line with a completely new line, I could not do a replace due to certain syntax restrictions.
How do I keep my original indentation when the line is replaced
Can I capitalize my variable and remove the underscore on the fly, i.e. the title is a capitalize and underscore removed version of the variableName, the list of items in the variable array is really long so I am trying to do this in one shot.
Ex: I want report_type -> Report Type done mid process
Is there a better way to solve this with sed? Thanks for any inputs much appreciated.
sed function is as follows
variableName=$1
sed -i "/name\=\"${variableName}\.name\" value\=model\.${variableName}\.name options\=\#lists\./c\\{\{\> \_dropdown title\=\"${variableName}\" required\=true name\=\"${variableName}\"\}\}" test
SAMPLE INPUT
{{> _select title="Report Type" required=true name="report_type.name" value=model.report_type.name options=#lists.report_type}}
SAMPLE EXPECTED OUPUT
{{> _dropdown title="Report Type" required=true name="report_type" value=model.report_type.name}}
sample input variable
report_type
Try this:
sed -E "s/^(\s+).*name\=\"(report_type)\.name\" value\=model\.report_type\.name options\=\#lists\..*$/\1\{\{\> \_dropdown title\=\"\2\" required\=true name\=\"\2\"\}\}/;T;s/\"(\w+)_(\w+)\"/\"\u\1 \u\2\"/g" input.txt > output.txt
I used "report_type" instead of ${variableName} for testing as an sed one-liner.
Please change back to ${variableName}.
Then go back to using -i (in addition to -E, which is for extended regex).
I am not sure whether I can do it without extended regex, let me know if that is necessary.
use s/// to replace fine tuned line
first capture group for the white space making the indentation
second capture group for the variable name
stop if that did not replace anything, T;
another s///
look for something consisting of only letters between "",
with a "_" between two parts,
seems safe enough because this step is only done on the already replaced line
replace by two parts, without "_"
\u for making camel case
Note:
Doing this on your sample input creates two very similar lines.
I assume that is intentional. Otherwise please provide desired output.
Using GNU sed version 4.2.1.
Interesting line of output:
{{> _dropdown title="Report Type" required=true name="Report Type"}}

Remove line break if line does not start with KEYWORD

I have a flat file with lines that look like
KEYWORD|DATA STRING HERE|32|50135|ANOTHER DATA STRING
KEYWORD|STRING OF DATA|1333|552555666|ANOTHER STRING
KEYWORD|STRING OF MORE DATA|4522452|5345245245|REALLY REALLY REALLY REALLY
LONGSTRING THAT INSERTED A LINE BREAK WHEN I WAS EXTRACTING FROM SQLPLUS/ORACLE
KEYWORD|.....
How do I go about removing the linebreak so that
KEYWORD|STRING OF MORE DATA|4522452|5345245245|REALLY REALLY REALLY REALLY
LONGSTRING THAT INSERTED A LINE BREAK WHEN I WAS EXTRACTING FROM SQLPLUS/ORACLE
turns into
KEYWORD|STRING OF MORE DATA|4522452|5345245245|REALLY REALLY REALLY REALLY LONGSTRING THAT INSERTED A LINE BREAK WHEN I WAS EXTRACTING FROM SQLPLUS/ORACLE
This is in a HP-UNIX environment and I can move the file to another system (windows box with powershell and ruby installed).
I don't know what tools are you using, but you can use this regex to match every \n (or maybe \r) that isn't followed by KEYWORD so you can replace it for SPACE and you would have it.
DEMO
Regex: \r(?!KEYWORD) (With global modifier)
Ruby's Array has a nice method called slice_before that it inherits from Enumerable, which comes to the rescue here:
require 'pp'
text = 'KEYWORD|DATA STRING HERE|32|50135|ANOTHER DATA STRING
KEYWORD|STRING OF DATA|1333|552555666|ANOTHER STRING
KEYWORD|STRING OF MORE DATA|4522452|5345245245|REALLY REALLY REALLY REALLY
LONGSTRING THAT INSERTED A LINE BREAK WHEN I WAS EXTRACTING FROM SQLPLUS/ORACLE
KEYWORD|.....'
pp text.split("\n").slice_before(/^KEYWORD/).map{ |a| a.join(' ') }
=> ["KEYWORD|DATA STRING HERE|32|50135|ANOTHER DATA STRING",
"KEYWORD|STRING OF DATA|1333|552555666|ANOTHER STRING",
"KEYWORD|STRING OF MORE DATA|4522452|5345245245|REALLY REALLY REALLY REALLY LONGSTRING THAT INSERTED A LINE BREAK WHEN I WAS EXTRACTING FROM SQLPLUS/ORACLE",
"KEYWORD|....."]
This code just splits your text on line breaks, then uses slice_before to break the resulting array into sub-arrays, one for each block of text starting with /^KEYWORD/. Then it walks through the resulting sub-arrays, joining them with a single space. Any line that wasn't pre-split will be left alone. Ones that were broken are rejoined.
For real use you'd probably want to replace pp with a regular puts.
As for moving the code to Windows with Ruby, why? Install Ruby on HP-Unix and run it there. It's a more natural fit.
this short awk oneliner should do the job:
awk '/^KEYWORD/{print ""}{printf $0}' file
This might work for you (GNU sed):
sed ':a;$!{N;/\n.*|/!{s/\n/ /;ba}};P;D' file
Keep two lines in the pattern space and if the second line doesn't contain a | replace the newline with a space and repeat until it does or the the end of the file is reached.
This assumes the last field is the field that overflows, otherwise use the KEYWORD such:
sed ':a;$!{N;/\nKEYWORD/!{s/\n/ /;ba}};P;D' file
Powershell way:
[System.IO.File]::ReadAllText( "c:\myfile.txt" ) -replace "`r`n(?!KEYWORD)", ' '
You can use sed or awk (preferred) for this ยป
sed -n 's|\r||g;$!{1{x;d};H};${H;x;s|\n\(KEYWORD\)|\r\1|g;s|\n||g;s|\r|\n|g;p}' file.txt
awk 'BEGIN{ORS="";}NR==1{print;next;}/^KEYWORD/{print"\n";print;next;}{print;}' file.txt
Note: Write each command (sed, awk) in one line

display consolidated list of numbers from a CSV using BASH

I was sent a large list of URL's in an Excel spreadsheet, each unique according to a certain get variable in the string (who's value is a number ranging from 5-7 numbers in length). I am having to run some queries on our databases based on those numbers, and don't want to have to go through the hundreds of entries weeding out the numbers one-by-one. What BASH commands that can be used to parse out the number from each line (it's the only number in each line) and consolidate it down to one line with all the numbers, comma separated?
A sample (shortened) listing of the CVS spreadsheet includes:
http://www.domain.com/view.php?fDocumentId=123456
http://www.domain.com/view.php?fDocumentId=223456
http://www.domain.com/view.php?fDocumentId=323456
http://www.domain.com/view.php?fDocumentId=423456
DocumentId=523456
DocumentId=623456
DocumentId=723456
DocumentId=823456
....
...
The change of format was intentional, as they decided to simply reduce it down to the variable name and value after a few rows. The change of the get variable from fDocumentId to just DocumentId was also intentional. Ideal output would look similar to:
123456,23456,323456,423456,523456,623456,723456,823456
EDIT: my apologies, I did not notice that half way through the list, they decided to get froggy and change things around, there's entries that when saved as CSV, certain rows will appear as:
"DocumentId=098765 COMMENT, COMMENT"
DocumentId=898765 COMMENT
DocumentId=798765- COMMENT
"DocumentId=698765- COMMENT, COMMENT"
With several other entries that look similar to any of the above rows. COMMENT can be replaced with a single string of (upper-case) characters no longer than 3 characters in length per COMMENT
Assuming the variable always on it's own, and last on the line, how about just taking whatever is on the right of the =?
sed -r "s/.*=([0-9]+)$/\1/" testdata | paste -sd","
EDIT: Ok, with the new information, you'll have to edit the regex a bit:
sed -r "s/.*f?DocumentId=([0-9]+).*/\1/" testdata | paste -sd","
Here anything after DocumentId or fDocumentId will be captured. Works for the data you've presented so far, at least.
More simple than this :)
cat file.csv | cut -d "=" -f 2 | xargs
If you're not completely committed to bash, the Swiss Army Chainsaw will help:
perl -ne '{$_=~s/.*=//; $_=~s/ .*//; $_=~s/-//; chomp $_ ; print "$_," }' < YOUR_ORIGINAL_FILE
That cuts everything up to and including an =, then everything after a space, then removes any dashes. Run on the above input, it returns
123456,223456,323456,423456,523456,623456,723456,823456,098765,898765,798765,698765,

Resources