I'm running Apex 19.2 and I would like to create a classical or interactive report based on dynamic query.
The query I'm using is not known at design time. It depends on an page item value.
-- So I have a function that generates the SQL as follows
GetSQLQuery(:P1_MyItem);
This function may return something like
select Field1 from Table1
or
Select field1,field2 from Table1 inner join Table2 on ...
So it's not a sql query always with the same number of columns. It's completely variable.
I tried using PL/SQL function Body returning SQL Query but it seems like Apex needs to parse the query at design time.
Has anyone an idea how to solve that please ?
Cheers,
Thanks.
Enable the Use Generic Column Names option, as Koen said.
Then set Generic Column Count to the upper bound of the number of columns the query might return.
If you need dynamic column headers too, go to the region attributes and set Type (under Heading) to the appropriate value. PL/SQL Function Body is the most flexible and powerful option, but it's also the most work. Just make sure you return the correct number of headings as per the query.
I'd like to generate the following SQL with rails / arel:
SELECT * FROM GROUPS
WHERE id = 10
CONNECT BY PARENT_ID = ID
I don't want to use plain SQL except for the last statement which is oracle specific (the real query is much more complex and I don't want to perform endless string concatenations).
What I've tried so far:
Group.where(id: 10).join('CONNECT BY PARENT_ID=ID')
This does not work as it places the custom SQL before the WHERE statement (as it assumes it's a join).
So the actual question is, how to add a custom bit of SQL to a query after the WHERE statements?
I have to run one of the two queries through a ViewObject in Oracle Adf. It's based on a condition that I may or may not enter a group Code. The first query handles the scenario when the user will not input any parameters and the second query handles the scenario when user inputs a Group Code. depending on whether user inputs parameter or not, I have to run on the following queries. I will be using only one View Object.
1.SELECT IIM.index_num
,IIM.description
FROM inv_item_mst IIM
WHERE IIM.group_cd IN (:GroupCode1,:GroupCode2,:GroupCode3,:GroupCode4,:GroupCode5,:GroupCode6,:GroupCode7)
AND IIM.generic_cd LIKE NVL(:generic_cd_param,'%')
AND IIM.supplier_cd LIKE NVL(:supplier_cd_param,'%')
2.SELECT IIM.index_num
,IIM.description
FROM inv_item_mst IIM
WHERE IIM.group_cd =:groupCd
Since you are selecting the same columns from the same table just combine the statements with an OR condition in the WHERE clause checking if the :groupCd value is present:
SELECT IIM.index_num, IIM.description
FROM inv_item_mst IIM
WHERE (:groupCd IS NOT NULL AND IIM.group_cd =:groupCd)
OR (:groupCd IS NULL AND
IIM.group_cd IN (:GroupCode1,:GroupCode2,:GroupCode3,:GroupCode4,:GroupCode5,:GroupCode6,:GroupCode7)
AND IIM.generic_cd LIKE NVL(:generic_cd_param,'%')
AND IIM.supplier_cd LIKE NVL(:supplier_cd_param,'%')
)
<-------PeopleCode------>
Hi,
I have a SQL query that i have tried executing using both SQLEXEC and SQL.fetch() but the problem is, when I am passing the values to parameters (:1,:2...) it does not return a row but when I hardcode the values in the where clause of the query itself, it retrieves the correct value.
Can anybody help?
My query looks similar to the following sample query :
Select * from PS_rec1 where emplid=:1 and plan_type=:2
it returns no data till i hardcode the values.
I have checked the values at the back end and some data is there to be fetched. Moreover, the same query retrieves data when ran in TOAD.
Have you tried outputting your binds to a log file just before you use them in your SQL statement?
If the binds aren't working, but literals are, then perhaps your binds don't contain the values that you expect them to.
You could also try explicitly setting the binds to the values that you're expecting just before the SQL statement. This will prove that the way you're passing in the binds is working correctly.
It required another update to the same record to get the values fetched in SQL exec.
M not sure what was the problem but i guess it might be that the previous update did not write the changes to the db even after an explicit commit.
Ok, you need to put your exact SQLExec statement in the question.
But, do you really have "Select * ..." in a SQLExec? How many columns are in your table? Since you mention the where clause, is your statement
SQLExec("select * from PS_rec where emplid=:1 and plan_type=:2", &var1, &var2, &vartocontainthewholerow);
Which will work in a SQL tool (toad) but probably does not work in AE or any type of Peoplecode program.
Now if your table has three columns, should you not have something like this:
SQLExec("select emplid, plan_type, column3 from PS_rec where emplid = :1 and plan_type=:2", &emplidIn, &plan_typeIn, &emplidOut, &plan_typeOut, &column3Out);
Notice that with three columns in the table that emplid and plan_type are two of them, you need to list all the columns you want, not asterisks '*'. Kind of silly to select the emplid and plan_type though.
I am getting
ORA-30926: unable to get a stable set of rows in the source tables
in the following query:
MERGE INTO table_1 a
USING
(SELECT a.ROWID row_id, 'Y'
FROM table_1 a ,table_2 b ,table_3 c
WHERE a.mbr = c.mbr
AND b.head = c.head
AND b.type_of_action <> '6') src
ON ( a.ROWID = src.row_id )
WHEN MATCHED THEN UPDATE SET in_correct = 'Y';
I've ran table_1 it has data and also I've ran the inside query (src) which also has data.
Why would this error come and how can it be resolved?
This is usually caused by duplicates in the query specified in USING clause. This probably means that TABLE_A is a parent table and the same ROWID is returned several times.
You could quickly solve the problem by using a DISTINCT in your query (in fact, if 'Y' is a constant value you don't even need to put it in the query).
Assuming your query is correct (don't know your tables) you could do something like this:
MERGE INTO table_1 a
USING
(SELECT distinct ta.ROWID row_id
FROM table_1 a ,table_2 b ,table_3 c
WHERE a.mbr = c.mbr
AND b.head = c.head
AND b.type_of_action <> '6') src
ON ( a.ROWID = src.row_id )
WHEN MATCHED THEN UPDATE SET in_correct = 'Y';
You're probably trying to to update the same row of the target table multiple times. I just encountered the very same problem in a merge statement I developed. Make sure your update does not touch the same record more than once in the execution of the merge.
A further clarification to the use of DISTINCT to resolve error ORA-30926 in the general case:
You need to ensure that the set of data specified by the USING() clause has no duplicate values of the join columns, i.e. the columns in the ON() clause.
In OP's example where the USING clause only selects a key, it was sufficient to add DISTINCT to the USING clause. However, in the general case the USING clause may select a combination of key columns to match on and attribute columns to be used in the UPDATE ... SET clause. Therefore in the general case, adding DISTINCT to the USING clause will still allow different update rows for the same keys, in which case you will still get the ORA-30926 error.
This is an elaboration of DCookie's answer and point 3.1 in Tagar's answer, which from my experience may not be immediately obvious.
How to Troubleshoot ORA-30926 Errors? (Doc ID 471956.1)
1) Identify the failing statement
alter session set events ‘30926 trace name errorstack level 3’;
or
alter system set events ‘30926 trace name errorstack off’;
and watch for .trc files in UDUMP when it occurs.
2) Having found the SQL statement, check if it is correct (perhaps using explain plan or tkprof to check the query execution plan) and analyze or compute statistics on the tables concerned if this has not recently been done. Rebuilding (or dropping/recreating) indexes may help too.
3.1) Is the SQL statement a MERGE?
evaluate the data returned by the USING clause to ensure that there are no duplicate values in the join. Modify the merge statement to include a deterministic where clause
3.2) Is this an UPDATE statement via a view?
If so, try populating the view result into a table and try updating the table directly.
3.3) Is there a trigger on the table? Try disabling it to see if it still fails.
3.4) Does the statement contain a non-mergeable view in an 'IN-Subquery'? This can result in duplicate rows being returned if the query has a "FOR UPDATE" clause. See Bug 2681037
3.5) Does the table have unused columns? Dropping these may prevent the error.
4) If modifying the SQL does not cure the error, the issue may be with the table, especially if there are chained rows.
4.1) Run the ‘ANALYZE TABLE VALIDATE STRUCTURE CASCADE’ statement on all tables used in the SQL to see if there are any corruptions in the table or its indexes.
4.2) Check for, and eliminate, any CHAINED or migrated ROWS on the table. There are ways to minimize this, such as the correct setting of PCTFREE.
Use Note 122020.1 - Row Chaining and Migration
4.3) If the table is additionally Index Organized, see:
Note 102932.1 - Monitoring Chained Rows on IOTs
Had the error today on a 12c and none of the existing answers fit (no duplicates, no non-deterministic expressions in the WHERE clause). My case was related to that other possible cause of the error, according to Oracle's message text (emphasis below):
ORA-30926: unable to get a stable set of rows in the source tables
Cause: A stable set of rows could not be got because of large dml activity or a non-deterministic where clause.
The merge was part of a larger batch, and was executed on a live database with many concurrent users. There was no need to change the statement. I just committed the transaction before the merge, then ran the merge separately, and committed again. So the solution was found in the suggested action of the message:
Action: Remove any non-deterministic where clauses and reissue the dml.
SQL Error: ORA-30926: unable to get a stable set of rows in the source tables
30926. 00000 - "unable to get a stable set of rows in the source tables"
*Cause: A stable set of rows could not be got because of large dml
activity or a non-deterministic where clause.
*Action: Remove any non-deterministic where clauses and reissue the dml.
This Error occurred for me because of duplicate records(16K)
I tried with unique it worked .
but again when I tried merge without unique same proble occurred
Second time it was due to commit
after merge if commit is not done same Error will be shown.
Without unique, Query will work if commit is given after each merge operation.
I was not able to resolve this after several hours. Eventually I just did a select with the two tables joined, created an extract and created individual SQL update statements for the 500 rows in the table. Ugly but beats spending hours trying to get a query to work.
As someone explained earlier, probably your MERGE statement tries to update the same row more than once and that does not work (could cause ambiguity).
Here is one simple example. MERGE that tries to mark some products as found when matching the given search patterns:
CREATE TABLE patterns(search_pattern VARCHAR2(20));
INSERT INTO patterns(search_pattern) VALUES('Basic%');
INSERT INTO patterns(search_pattern) VALUES('%thing');
CREATE TABLE products (id NUMBER,name VARCHAR2(20),found NUMBER);
INSERT INTO products(id,name,found) VALUES(1,'Basic instinct',0);
INSERT INTO products(id,name,found) VALUES(2,'Basic thing',0);
INSERT INTO products(id,name,found) VALUES(3,'Super thing',0);
INSERT INTO products(id,name,found) VALUES(4,'Hyper instinct',0);
MERGE INTO products p USING
(
SELECT search_pattern FROM patterns
) o
ON (p.name LIKE o.search_pattern)
WHEN MATCHED THEN UPDATE SET p.found=1;
SELECT * FROM products;
If patterns table contains Basic% and Super% patterns then MERGE works and first three products will be updated (found). But if patterns table contains Basic% and %thing search patterns, then MERGE does NOT work because it will try to update second product twice and this causes the problem. MERGE does not work if some records should be updated more than once. Probably you ask why not update twice!?
Here first update 1 and second update 1 are the same value but only by accident. Now look at this scenario:
CREATE TABLE patterns(code CHAR(1),search_pattern VARCHAR2(20));
INSERT INTO patterns(code,search_pattern) VALUES('B','Basic%');
INSERT INTO patterns(code,search_pattern) VALUES('T','%thing');
CREATE TABLE products (id NUMBER,name VARCHAR2(20),found CHAR(1));
INSERT INTO products(id,name,found) VALUES(1,'Basic instinct',NULL);
INSERT INTO products(id,name,found) VALUES(2,'Basic thing',NULL);
INSERT INTO products(id,name,found) VALUES(3,'Super thing',NULL);
INSERT INTO products(id,name,found) VALUES(4,'Hyper instinct',NULL);
MERGE INTO products p USING
(
SELECT code,search_pattern FROM patterns
) s
ON (p.name LIKE s.search_pattern)
WHEN MATCHED THEN UPDATE SET p.found=s.code;
SELECT * FROM products;
Now first product name matches Basic% pattern and it will be updated with code B but second product matched both patterns and cannot be updated with both codes B and T in the same time (ambiguity)!
That's why DB engine complaints. Don't blame it! It knows what it is doing! ;-)