What regex can I use in place of regex in the code:
"<tr><td>Total</td><td class=\"bar\">561 of 931</td><td class=\"ctr2\">40%</td><td class=\"bar\">38 of 58</td><td class=\"ctr2\">34%</td><td class=\"ctr1\">58</td><td class=\"ctr2\">94</td>"
.scan(regex).last
to get "40%" (the first percentage figure) without modifying any other part of the code above?
I would do something like this:
regexp = /\A.*?(\d+%)/
matches = "<tr><td>Total</td><td class=\"bar\">561 of 931</td><td class=\"ctr2\">40%</td><td class=\"bar\">38 of 58</td><td class=\"ctr2\">34%</td><td class=\"ctr1\">58</td><td class=\"ctr2\">94</td>".scan(regexp).last
puts matches
#=> 40%
Explanation: \A matches the beginning of the string, .*? matches everything non-greedy and (\d+%) finally matches the number and the percentage sign.
Related
I want to select all the commas in a string that do not have any white space around. Suppose I have this string:
"He,she, They"
I want to select only the comma between he and she. I tried this in rubular and came up with this regex:
(,[^(,\s)(\s,)])
This selects the comma that I want, but also selects an s which is a character after it.
In your regex (,[^(,\s)(\s,)]) you capture a comma followed by a negated character class that matches not any of the specified characters, which could also be written as (,[^)(,\s]) which will capture for example ,s in a group,
What you could do is use a positive lookahead and a positve lookbehind to check what is on the left and what is on the right is not a \S whitespace character:
(?<=\S),(?=\S)
Regex demo
In Ruby, you may use [[:space:]] to match any (Unicode) whitespace and [^[:space:]] to match any char other than whitespace. Using these character classes inside lookarounds solves the problem:
/(?<=[^[:space:]]),(?=[^[:space:]])/
See the Rubular demo
Here,
(?<=[^[:space:]]) - a positive lookbehind that matches a location that is immediately preceded with a non-whitespace char (if the string start position should also be matched, replace with (?<![[:space:]]))
, - a comma
(?=[^[:space:]]) - a positive lookahead that matches a location that is immediately followed with a non-whitespace char (if the string end position should also be matched, replace with (?![[:space:]])).
Check the regex below and use the code hope it will help you!
re = /[^\s](,)[^\s]/m
str = 'check ,my,domain, qwe,sd'
# Print the match result
str.scan(re) do |match|
puts match.to_s
end
Check LIVE DEMO HERE
I have a string with chars inside and I would like to match only the chars around a string.
"This is a [1]test[/1] string. And [2]test[/2]"
Rubular http://rubular.com/r/f2Xwe3zPzo
Currently, the code in the link matches the text inside the special chars, how can I change it?
Update
To clarify my question. It should only match if the opening and closing has the same number.
"[2]first[/2] [1]second[/2]"
In the code above, only first should match and not second. The text inside the special chars (first), should be ignored.
Try this:
(\[[0-9]\]).+?(\[\/[0-9]\])
Permalink to the example on Rubular.
Update
Since you want to remove the 'special' characters, try this instead:
foo = "This is a [1]test[/1] string. And [2]test[/2]"
foo.gsub /\[\/?\d\]/, ""
# => "This is a test string. And test"
Update, Part II
You only want to remove the 'special' characters when the surrounding tags match, so what about this:
foo = "This is a [1]test[/1] string. And [2]test[/2], but not [3]test[/2]"
foo.gsub /(?:\[(?<number>\d)\])(?<content>.+?)(?:\[\/\k<number>\])/, '\k<content>'
# => "This is a test string. And test, but not [3]test[/2]"
\[([0-9])\].+?\[\/\1\]
([0-9]) is a capture since it is surrounded with parentheses. The \1 tells it to use the result of that capture. If you had more than one capture, you could reference them as well, \2, \3, etc.
Rubular
You can also use a named capture, rather than \1 to make it a little less cryptic. As in: \[(?<number>[0-9])\].+?\[\/\k<number>\]
Here's a way to do it that uses the form of String#gsub that takes a block. The idea is to pull strings such as "[1]test[/1]" into the block, and there remove the unwanted bits.
str = "This is a [1]test[/1] string. And [2]test[/2], plus [3]test[/99]"
r = /
\[ # match a left bracket
(\d+) # capture one or more digits in capture group 1
\] # match a right bracket
.+? # match one or more characters lazily
\[\/ # match a left bracket and forward slash
\1 # match the contents of capture group 1
\] # match a right bracket
/x
str.gsub(r) { |s| s[/(?<=\]).*?(?=\[)/] }
#=> "This is a test string. And test, plus [3]test[/99]"
Aside: When I first heard of named capture groups, they seemed like a great idea, but now I wonder if they really make regexes easier to read than \1, \2....
I'm trying to remove a period prior to the "#" symbol from an email. I got:
array[0][2].gsub(/\./, '').strip
which removes both periods; "an.email#test.com" becomes "anemail#testcom", while I'm looking for it to become "anemail#test.com". I can't remove just the single period by itself. What am I doing wrong?
If there are no periods before # or if there are more than one period, you can use this regex
email = "my.very.long.email#me.com"
email.gsub(/\.(?=[^#]*\#)/, '')
# => "myverylongemail#me.com"
Regex explanation: period followed by zero or more occurrence of any character other than #, followed by an #
If only the first occurrence of a period before # has to be removed, you can use the same regex with sub instead of gsub
result = subject.gsub(/\.(?=\S+#)/, '')
Explanation
\. matches a period
the (?=\S+#) lookahead asserts that what follows is any non-whitespace chars followed by an arrobas
we replace with the empty string
Reference
Lookahead and Lookbehind Zero-Length Assertions
Mastering Lookahead and Lookbehind
Don't make this more complicated by trying to make it short. Just write it the way you mean it:
a, b = address.split('#')
cleaned = [a.delete('.'), b].join('#')
I am trying to write a Ruby regex that will return a set of named matches. If the first element (defined by slashes) is found anywhere later in the string then I want the match to return that 2nd match onward. Otherwise, return the whole string. The closest I've gotten is (?<p1>top_\w+).*?(?<hier>\k<p1>.*) which doesn't work for the 3rd item. I've tried regex ifthen-else constructs but Rubular says it's invalid. I've tried (?<p1>[\w\/]+?)(?<hier>\k<p1>.*) which correct splits the 1st and 4th lines but doesn't work for the others. Please note: I want all results to return as the same named reference so I can iterate through "hier".
Input:
top_cat/mouse/dog/top_cat/mouse/dog/elephant/horse
top_ab12/hat[1]/top_ab12/hat[1]/path0_top_ab12/top_ab12path1/cool
top_bat/car[0]
top_2/top_1/top_3/top_4/top_2/top_1/top_3/top_4/dog
Output:
hier = top_cat/mouse/dog/elephant/horse
hier = top_ab12/hat[1]/path0_top_ab12/top_ab12path1/cool
hier = top_bat/car[0]
hier = top_2/top_1/top_3/top_4/dog
Problem
The reason it does not match the second line is because the second instance of hat does not end with a slash, but the first instance does.
Solution
Specify that there is a slash between the first and second match
Regex
(top_.*)/(\1.*$)|(^.*$)
Replacement
hier = \2\3
Example
Regex101 Permalink
More info on the Alternation token
To explain how the | token works in regex, see the example: abc|def
What this regex means in plain english is:
Match either the regex below (attempting the next alternative only if this one fails)
Match the characters abc literally
Or match the regex below (the entire match attempt fails if this one fails to match)
Match the characters def literally
Example
Regex: alpha|alphabet
If we had a phrase "I know the alphabet", only the word alpha would be matched.
However, if we changed the regex to alphabet|alpha, we would match alphabet.
So you can see, alternation works in a left-to-right fashion.
paths = %w(
top_cat/mouse/dog/top_cat/mouse/dog/elephant/horse
top_ab12/hat/top_ab12/hat[1]/path0_top_ab12/top_ab12path1/cool
top_bat/car[0]
top_2/top_1/top_3/top_4/top_2/top_1/top_3/top_4/dog
test/test
)
paths.each do |path|
md = path.match(/^([^\/]*).*\/(\1(\/.*|$))/)
heir = md ? md[2] : path
puts heir
end
Output:
top_cat/mouse/dog/elephant/horse
top_ab12/hat[1]/path0_top_ab12/top_ab12path1/cool
top_bat/car[0]
top_2/top_1/top_3/top_4/dog
test
I have a string something like:
test:awesome my search term with spaces
And I'd like to extract the string immediately after test: into one variable and everything else into another, so I'd end up with awesome in one variable and my search term with spaces in another.
Logically, what I'd so is move everything matching test:* into another variable, and then remove everything before the first :, leaving me with what I wanted.
At the moment I'm using /test:(.*)([\s]+)/ to match the first part, but I can't seem to get the second part correctly.
The first capture in your regular expression is greedy, and matches spaces because you used .. Instead try:
matches = string.match(/test:(\S*) (.*)/)
# index 0 is the whole pattern that was matched
first = matches[1] # this is the first () group
second = matches[2] # and the second () group
Use the following:
/^test:(.*?) (.*)$/
That is, match "test:", then a series of characters (non-greedily), up to a single space, and another series of characters to the end of the line.
I am guessing you want to remove all the leading spaces before the second match too, hence I have \s+ in the expression. Otherwise, remove the \s+ from the expression, and you'll have what you want:
m = /^test:(\w+)\s+(.*)/.match("test:awesome my search term with spaces")
a = m[1]
b = m[2]
http://codepad.org/JzuNQxBN