I have a dtsx file that deals with more than 200 table export and script that log information before and after completing export of each table. I am trying to change the logging to include more details, It is a time consuming process to open one by one log script object, click edit and make my changes. I opened the dtsx file in notepad++ with regex, I updated the script text by adding more log information. But my changes are not in effect when I run SSIS.
When I open the modified dtsx file in visual studio 2013, double click log script object, click edit then add a space save on all the log objects then my changes are in effect.
I compared those two files (one modified from notepad++ other from visual studio), other than some GUID difference and my new space character there is no change. Why my changes are not in effect when I make them in notepad++? Am I missing something?
Excellent! The root issue is that much like if you make a change to a C# class file, those changes wouldn't be reflected in the application until you compile. That's what's happening here, you've changed the source script for the SSIS package but you need to compile that script into byte code so it can actually be run.
The 2005 release of SSIS allowed us to specify whether the code should be compiled at run time versus design time but that didn't work out well at all so at some point in the lifecycle of 2005, that ability was nixed and the code had to set at design time.
I think I've seen code to compile a script task/component but whether that was on SO or elsewhere is a mystery at this point. I believe Matt Mason indicated there were changes in how things compiled between 2005/2008 and 2012+ but I can't find the post. There is this post which might give you a shove in the right direction for which classes you'll need to use to get the packages to compile.
Related
When I use Visual Studio 2010 to debug a crash dump file (native code), it attempts to load C/C++ source files from the original build folder (and it gives the message "The source file is different from when the module was built. Would you like the debugger to use it anyway?"). The message is correct; the file is not the correct version.
What I would like VS2010 to do is to check out the source file using source server. If the file does not currently exist in its original build location, VS2010 will correctly use source server and retrieve the appropriate revision of the file (from Subversion). In order to force it to check out the correct revision, I have to physically delete the file from the original build location.
As a side note, VS2005 works as desired (well ... as I desire, perhaps not as others desire). VS2005 will always check out the correct revision from source control regardless of whether a copy of the file exists in the original build folder.
I believe the question comes down to one of the following:
Is there some kind of setting available that will change VS2010's precedence for finding source files?
Alternatively, is it possible to make VS2010 offer a choice/option to check out the source file in question? (Currently the only option I see in this situation is to browse for it.)
Or is it possible to completely exclude a specific path (folder) from the search?
I have the same problem with VS2010 and made an attempt to figure it out. I monitored devenv.exe with procmon but didn't see anything out of the order with the files & registry keys it was accessing. Pretty much the same information you see in the error report when VS2010 can't find the source. My solution is to use VS2005 as it works fine. I did see some correspondence on MSDN about a similar (if not the same) bug and they claimed it would be fixed in the final release of 2012. I believe I have that final release of 2012 and it has the same problem.
Here's a maybe slightly complicated solution
1) Create a script that will download and replace the pdb file (a .bat, a python script, whatever)
2) Create a new External Tool within VS2010 (Tools -> External Tools -> Add)
3) Point the tool to your script and pass any project-specific stuff to it as arguments
4) Create a post-build or pre-build step in your project that will call your new External Tool (project properties -> Build Events -> whatever)
This is a lot of work, but at least it will fully integrate it into your building process.
Note: Sometimes I've noticed that my post-build steps won't run unless I've compiled at least on cpp file. I usually press F7 and build some source and then build fully, to make sure everything works as expected.
You can change the local source directory to a different name when you are debugging crash dump file.
Or you can change the build directory to a different path with your local directory.
I am using PowerShell to modify a series of configuration files within a solution. The solution is under TFS 2010 control.
The solution has many projects and the configuration files are all xml files. The easy part is if I just need to modify a file, I check it out using the checkout command then save the file when I'm done. All good. I go into Visual Studio and see the modified files are updated with pending changes as I would expect
The part I'm having difficulty with is when I have a configuration file that is no longer needed and can be deleted. Using the delete command does, in fact, mark the file for a pending delete, but it does not modify the project file where the deleted file is contained.
When I delete a file via Visual Studio, it automatically checks out and modifies the project file for me. I'm not getting the same result when using a command line delete.
It's not practical for me to do this by hand as I am eliminating over 1,000 files.
Any help would be greatly appreciated!
Thank you.
There are two components at work here. When you are running inside VS, the project system processes all file commands (adds, deletes, edits, etc.) and then calls into the TFS Object Model to actually pend the changes in TFS. The project system is also the one responsible here for removing the reference from the project file. The TFS OM has no knowledge of whether a file is part of a project or not when it is run outside of Visual Studio.
If you have a list of the xml files that you need to delete your best bet is to write a script that reads these in and removes them from the project file (after pending an edit on the project file, of course).
-Taylor,
TFS Version Control Development Lead
Thank you all for your responses. After much digging and trial and error, I figured it out. It was way more simple than I was making it.
In short, I used DTE and ran my script from within VS using the PowerShell console. It went something like this:
$mySolution = $dte.Solution
$projectItem = $mySolution.FindProjectItem($fileToRemove)
if ( $projectItem -ne $null )
{
$projectItem.Remove()
}
Executing the Remove() command on the ProjectItem checks out the corresponding project and edits it accordingly.
Again, thank you again for the time you all took to look at my question and respond. Hope this helps someone else someday!
This is not a work-stopper in any way, but I thought I should ask anyway because it is a little annoying. Let's say I create a new project and start putting source files in a directory other than the default that shows up the first time. Afterwords, whenever I open the project, I have to navigate to the source directory once during that session. Like I said, not a big deal (but if solvable, then it's icing on the cake). Quite a few times I absentmindedly put the source file in the default directory and end up committing that file to the SVN and if I am lucky, going through all the files, removing them, then adding them again.
So my question is, is there any way to specify the default source directory on a per project basis?
I have run into the same nuisance. I like to put the public interface header files for a library in a separate directory, but end up with file directory typos because I forget to navigate to the correct directory when saving a new file. Unfortunately, Visual Studio does not offer a setting to change the default directory for new C++ source files.
I had the same problem when I started using build systems (CMake, Premake) which requires me to keep my project files separate from my source files, which hampered my workflow.
Although changing the default source directory seems impossible, if you aren't afraid to spend money, the workaround I found was to use the Visual Assist extension.
You can bind a shortcut of your choise to the Create File command which creates
a new file relative to the directory or your open file.
I'd also recommend to base one's workflow around the wonderful
Create from Usage command (which I think greatly boosts
productivity) which almost eliminates the need to manually create files.
The extension is great, albeit a bit costly. I would love to see Microsoft incorporate these features directly in the IDE eventually as they are found vanilla in a lot of other IDEs e.g. Eclipse, Intellij.
There might be some free extensions available that does the same thing, but I haven't found any.
Changing the Default Project Folder may help. This page demonstrates how to change the default for Visual Studio 2005, and it should be the same for later versions.
When I right-click my solution in the Solution Explorer and choose Properties I get a dialog where I can select the Startup Project.
I sometimes select Current selection (If it is an experimental solution with lots of projects I jump between), but most often it is a Single startup project selected, which would usually be the main WinForms applications or or Console application.
My problem is that whenever I do a treeclean with the tfpt command (Team Foundation Power Tools 2008) this setting is forgotten. So when I try to run my solution the next time, it has defaulted to some random project and I get an error stating that I cannot run a class library or something like that. Which is obvious of course. But where is this setting stored? Why is it forgotten when I do the treeclean? The solution file is still there, right? Isn't solution properties stored there?
Reference 1
Arian Kulp says:
I was struggling with trying to figure
out why a certain solution of mine
wasn’t starting right. It was in VB
with four projects. Upon initial open
it would set a certain project with a
DLL output as startup. If I set the
EXE as startup project, it was fine,
but when I distribute code I always
clean it by removing *.suo and *.user
files, and bin/obj folders. Upon
opening the “cleaned” version, it
would always revert to the DLL project
and fail to F5 nicely. The fix turned
out to be simple, though I’m curious
as to why I needed to do this at all.
In the solution file, there are a list
of pseudo-XML “Project” entries. It
turns out that whatever is the first
one ends up as the Startup Project,
unless it’s overridden in the suo
file. Argh. I just rearranged the
order in the file and it’s good.
I’m guessing that C# is the same way
but I didn’t test it. I hope that
this helps someone!
Reference 2
Setting the StartUp Project
Which project is the "startup" project only has any relevance for debugging, which means it's user metadata from the point of the solution and the projects. Regardless of which project is the "startup" project, the compiled code is the same.
Because of this, the information is stored as a user setting in the Solution User Options file (solution.suo) which accompanies the Solution file (solution.sln). The .suo file "Records all of the options that you might associate with your solution so that each time you open it, it includes customizations that you have made" according to MSDN.
The .suo file is a binary file. If you want to read or change it programatically, you have to use IVsPersistSolutionOpts.LoadUserOptions from the Microsoft.VisualStudio.Shell.Interop namespace.
I suspect that this setting is saved as part of the .suo file created whenever you edit a solution file. This file contains various user settings, such as breakpoints, watch data etc.
I cannot confirm this but that would be my guess.
Unfortunately its not XML its a binary file and not easily edited.
I just wrote a little command line utility for windows called slnStartupProject to solve this. It sets the Startup Project automatically like this:
slnStartupProject slnFilename projectName
I personally use it to set the project after generating the solution with cmake that always sets a dummy ALL_BUILD project as the first project in the solution.
The source is on github:
https://github.com/michaKFromParis/slnStartupProject
Forks and feedbacks are welcome.
Hope this helps!
This may sound like a newbie question - and it is. I'm relatively new to vs, we started using it a few months ago, and I still haven't "mentally" made the change from the command line. So, if you could help me with 2 things:
I create a new project (not a solution). He puts the files in some directory. After putting my code inside it, I click on the little green triangle (Debug, it says), and he compiles it, builds it and runs it. It works ok. Now, sometimes, I have to change only a tiny bit of code and I don't feel like getting the whole VS up just for that. How can I do that Debug thing from the command line, with the assumption I didn't change anything else.
Where do I tell him not to create a "Debug" subdirectory, not to create a HTML Build log, an object file ... and so on, generally, where can I find the settings which will help me to get as little files ... apart from my original source, and the .exe resultant one ?
I have to change only a tiny bit of code and I don't feel like getting the whole VS up just for that. How can I do that Debug thing from the command line, with the assumption I didn't change anything else.
I think what you want here is not debugging but a rebuild of your project.
Where do I tell him not to create a "Debug" subdirectory, not to create a HTML Build log, an object file ... and so on, generally, where can I find the settings which will help me to get as little files ... apart from my original source, and the .exe resultant one ?
The answer to both these questions is to use the command line! You can make VS emit a make file from the loaded project. Use NMAKE to build this make file after you have made your desired modifications. The ".obj" files are created as an intermediate step between compilation and linking phase this is how the C++ compilation model works. Why do insist on not generating them?
You can't really start debugging without starting up Visual Studio, since Visual Studio is the debugger. You can tell VS to rebuild a solution from the command line without firing up the UI if you want to just build it: See MSDN for details.
You can control the creation of the DEBUG and RELEASE directories via the 'intermediate files' option in the project settings. Though you need to create the obj file somewhere in order for the compile to work.