Found the error " 502 Bad Gateway
nginx/1.9.9 "
While checking server in laravel Homestead using the address: http://phpmyadmin.app:8000/
Whats the problem and how to solve it?
If your ip is not set to 192.168.10.10 then its possible you get the error also you might need to edit your homestead.yaml site configuration to phpmyadmin.ap and not phpmyadmin.app also refrain yourself from using phpmyadmin.test, phpmyadmin.dev and so on I do not know if its a bug homestead are yet to fix.
Hope this solve the issue.
Related
Everytime i go to my project I get a 502 bad gateway. When I refresh, the page works.. If I click a link to another page I get 502 bad gateway again. After the refresh the page loads. What could be the problem here.
Homestead.yaml
---
ip: "192.168.10.10"
memory: 2048
cpus: 1
provider: virtualbox
authorize: c:/Users/MyNameHere/.ssh/id_rsa.pub
keys:
- c:/Users/MyNameHere/.ssh/id_rsa
folders:
- map: c:/Users/MyNameHere/Desktop/sites
to: /home/vagrant/code
sites:
- map: spa.test
to: /home/vagrant/code/spa/public
databases:
- homestead
Got the latest version for virtualbox and vagrant.
My spa folder contains the newest version laravel.
Login to Laravel Homestead Server with PuTTY and Private Key File.
then...
cd /etc/php/7.4/mods-available
sudo nano xdebug.ini
Comment out the first line
;zend_extension=xdebug.so
xdebug.remote_enable = 0
xdebug.remote_connect_back = 1
xdebug.remote_port = 9000
xdebug.max_nesting_level = 512
Then restart PHP-FPM
sudo service php7.4-fpm restart
Had the same issue with the latest version of homestead.
After digging in log files and then github issues for homestead, I found this this.
There's an issue with xdebug that they're waiting for a fix for. The solution is to disable xdebug or use php 7.2. I opted for the latter. In that case, make the following change in your homestead.yaml and then running vagrant reload --provision will fix this.
sites:
- map: spa.test
to: /home/vagrant/code/spa/public
php: "7.2"
I was having the same problem and I couldn't change the PHP version or disable xdebug, but I could and did change for the Apache server.
sites:
- map: spa.test
to: /home/vagrant/code/spa/public
type: "apache"
I had a similar issue, got the 502 error. Refreshing the browser or reloading the virtual machine had no effect.
I solved disabling the Xdebug. Found the solution here: https://christattum.com/disabling-xdebug-in-laravel-homestead/
On prompt:
cd /etc/php/7.4/mods-available
sudo vi xdebug.ini
Commented all the lines of the file with ;
Run the vagrant reload --provision command to the Homestead file in the virtual machine, and then after vagrant up, enter with vagrant ssh. Your problem will be solved :)
You can change your ip post adress and write 127.0.0.1 in your host file.
You can enter it by adding 8000 next to the project name in the search engine.
For example spa.test:8000 and then running vagrant reload --provision will fix this.
I lost 3 days trying to solve the same issue.
My mistake was to have defined in my host file something like:
127.0.0.1 spa.test
The solution is to add instead, the same IP you specified in Homestead.yaml.
192.168.10.10 spa.test
to /etc/host (In case of Mac)
to C:\Windows\System32\drivers\etc\hosts (in case of Windows)
Even if you have multiple hosts defined in your global Homestead.yaml file.
For instance
folders:
- map: /Users/davidecasiraghi/Projects/my_laravel_project
to: /home/vagrant/code/my_laravel_project
- map: /Users/davidecasiraghi/Projects/spa
to: /home/vagrant/code/spa
sites:
- map: my_laravel_project.test
to: /home/vagrant/code/my_laravel_project/public
- map: spa.test
to: /home/vagrant/code/spa/public
Then in the host file:
192.168.10.10 spa.test
192.168.10.10 my_laravel_project.test
Then when you will do vagrant up you will be able to access to both of them.
For me this was related to Xdebug, which doesn't seem to yet be compatible with PHP 7.3.
To continue using 7.3, you can turn Xdebug off with
sudo phpdismod xdebug
restart php service
sudo service php7.3-fpm reload
For Chinese,
if you are using Clash for Windows,
then edit "Bypass Domain".
It's not relevant to this question,
but Google lead me here,
Do this inside your Homestead VM vagrant ssh
Check your php version
$ php -v
Edit your website config file
$ sudo nano /etc/nginx/sites-available/<laravel.app>
line
fastcgi_pass unix:/var/run/php/php8.1-fpm.sock;
change according to your php version
mine was php8.2-fpm.sock; then I change it to php8.1-fpm.sock; press ctrl+x to save, then
$ sudo service nginx restart
$ sudo service php<ver>-fpm restart
reload the page
I'm trying to set up wildcard subdomains for a Laravel project in a Laravel/Homestead enviorement, but cannot figure it out why this does not works.
The local setup was successfull, but cannot make it work on the Ubuntu. I've set up in the nginx conf file the server name:
server_name example.test *.example.test
Restarted the nginx, but after accessing any subdomain, there is no activity in access_log.
how can this be done?
It seems, the best/easiest way to solve this is the vagrant-rubydns plugin:
I hope this will help somebody else.
I install a new Laravel app into my /sites folder called 'blog' using the laravel new blog terminal command.
The site builds fine, no errors on the terminal.
Then I used the subl /etc/hosts command to open up the hosts file in Sublime Text 3. Here is the contents of that file.
##
# Host Database
#
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
##
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
127.0.0.1 laraveltest.app
127.0.0.1 makoto.app
127.0.0.1 modelawiki.app
127.0.0.1 fresher.app
127.0.0.1 blog.app
Right now let's focus on blog.app.
I then use the subl Homestead.yaml command to open and edit the Homestead.yaml file and update the maps. Here's the contents of that file.
---
ip: "192.168.10.10"
memory: 2048
cpus: 1
provider: virtualbox
authorize: ~/.ssh/id_rsa.pub
keys:
- ~/.ssh/id_rsa
folders:
- map: ~/www/sites
to: /home/vagrant/sites
sites:
- map: blog.app
to: /home/vagrant/sites/blog/public
- map: laraveltest.app
to: /home/vagrant/sites/laravelTest/public
- map: makoto.app
to: /home/vagrant/sites/Makoto
- map: modelawiki.app
to: /home/vagrant/sites/modelawiki
- map: fresher.app
to: /home/vagrant/sites/fresher/public
databases:
- homestead
I then run the homestead provision command which is an alias for vagrant provision to update everything and get the site up and running.
Now before running the vagrant provision command, every other site (laraveltest.app:8000, makoto.app:8000, etc.) worked just fine, and or displayed the Default Laravel Splash screen (laraveltest.app:8000).
When visiting any of the sites mapped in the homestead.yaml file, all I'm getting is the following page displayed...
http://imgur.com/a/6IIkD
Here's the HTML output.
<html><body><h1>It works!</h1></body></html>
I'm confused on what I did wrong. I'm a newer user going through the Laravel Tutorials on LaraCasts. I followed CodeCourses videos on YouTube to help me install the Vagrant Box onto my machine.
I've also tried to see what was out there on the net for this issue and all i could find is this article on laravel valet... but it seems as though this isn't the tutorial I need.
https://laracasts.com/discuss/channels/laravel/valet-v112-update-just-keep-getting-the-it-works
Edit: I'm currently in the process of uninstalling the vagrant box running laravel/homestead. I did the vagrant destroy <id> command and the vargrant box remove. I then edited the /etc/hosts file and removed all the edited custom app names. I then also deleted my Homestead folder containing my homestead.yaml file. I'm hopefully starting with a fresh install here soon.
(Posted answer on behalf of the OP).
I reinstalled everything including the Vagrant box, and Homestead. Everything runs as normal. Don't know what happened. However the only way I can connect to my sites are to actually type the port in the URL. i.e. blog.app:8000. If i visit blog.app by itself, then the "It Works!" header comes back up and the laravel site goes away.
I'm thinking this might be an issue with nginx, and port forwarding? Since this is the case and the original question has been answered by myself, I'll be asking a new question about port forwarding and Laravel homestead.
Have you configured your sites-available ? try this line inside the virtual machine (after command vagrant ssh):
serve blog.app ~/sites/blog/public
It seems that you have already solved the problem, as you made an edit to your original question and linked to a new question. However, one thing I noticed that may have been causing your problem is the IP in your /etc/hosts file is does not match the IP in your Homestead.yaml file. When I use Laravel Homestead, I make sure that my /etc/hosts and Homestead.yaml files have identical IPs. I always get the Laravel splash page when I do this. Hopefully this is useful for future Vagrant boxes.
I just started using Homestead today and so far I don't think I know what I am doing, previously I was using the inbuilt PHP server that comes with Laravel and I had MySQL server and workbench installed separately on my computer.
With this setup I was able to connect to my database with ease, however since I got my Homestead running I can't seem to access that database again. This error keeps popping up:
3/3 ErrorException in Connector.php line 47: SQLSTATE[HY000] [1045]
Access denied for user 'myproject_db101'#'localhost' (using password: YES)
(View: /home/vagrant/Projects/myproject/resources/views/layout/index.blade.php)
(View: /home/vagrant/Projects/myproject/resources/views/layout/index.blade.php)
How can I fix this?
I was facing the same issue and I tried below steps to fix it. Please let me know if they work for you.
Note the homestead ip address for your vagrant box. It is available in Homestead.yaml file under ~/.homestead directory. This directory location would be different on different OS. But since you have already installed vagrant with homestead you should know its location. For me the ip address was 192.168.10.10.
Open up the Mysql Connection wizard and provide the below settings
hostname = 192.168.10.10
port = 3306
username = homestead
password = secret
Test Your connection
For me these settings worked. Check if they work for you.
These other answers might have worked for you guys, but in case anyone has a case like mine, I'm just going to provide what worked for me. Hopefully it helps someone out. I'm working on a brand new homestead installation as of today, but on a very old mac in case thats relevant.
What worked for me was using the regular localhost ip of my machine as the host, and then the homested/secret combination for the password, and using the default port but with a 0 at the end.
This adds up to be the following settings:
Connection method: Standard (TCP/IP)
Host: 127.0.0.1
Username: homestead
Password: secret
Port: 33060
Hopefully this helps someone out. Its the only configuration that worked for me.
Try using homestead's default MySQL credentials: User: root Password: secret
If you are accessing the database from your computer via MySQL Workbench (not from within the homestead VM), you can use localhost:33060 (note: non-standard port). This is mapped to port 3306 within your VM.
From your application and any time you're working from within the homestead VM, you can connect to the database normally as localhost on port 3306.
Very likely a configuration issue. Either the user 'myproject_db101'#'localhost' has no password set or is not allowed to connect from localhost. You need another user with proper rights (e.g. the root user) to fix permissions for that user.
Unable to access the homestead database through MYSQL workbench Please help me out to solve this issue
error messages at time of testing the connection - "Failed to Connect to MySQL at 127.0.0.1:33060 with user homestead Lost connection to MySQL server at 'reading initial communication packet', system error: 0"
please take a note that
Bind address in my.cnf file is 127.0.0.1 (my.cnf file located at /etc/mysql/)
hosts file contains: 127.0.0.1 localhost projectname (which is located at /etc/)
I have tried changing bind address to 0.0.0.0 but it was also not worked.
Actually I was keep trying to setup the database connectivity by just considering the homestead environment ... But on Keep searching I found one link http://www.acnenomor.com/171821p1/laravel-homestead-vagrant-box-database-problems from where I got idea and I tried once again with the data shown in attached image and it worked for me ... so I am sharing this answer in general .. it may help someone...
Please take a note that I have also tried to connect the database of Laravel homestead environment by installing all the stuffs in other system too and it was worked fine as described in the official document.. so in my case it might be the problem of some changes in configuration file of mysql or any other related environment... so please first go through the official document... http://laravel.com/docs/4.2/homestead#daily-usage
The first thing you need to do is
vagrant up
and then use these connections below for a default homestead installation.
Connection Method: Standard (TCP/IP)
Hostname: 127.0.0.1
Port: 33060
Username: homestead
Password: secret
Try the alternate IP of 192.168.10.10
hostname = 192.168.10.10
port = 3306
username = homestead
password = secret
This works for me on Windows 10 Home Version 20H2 OS Build 19042.1165 (To find this information navigate to Start, Type 'About' and click 'About your PC').
ran into a similar problem while trying to use SQLyog on my windows machine to connect to mySQL on a Homestead environment. I was able to resolve this issue by adding
skip-name-resolve
to the VMs /etc/mysql/my.conf file.
Apparently (according the mysql error logs) connections from the local machine were coming from '10.0.2.2', which caused the warning "IP Address '10.0.0.2' could not be resolved".
You will need to re-add this line every time you spin up the environment.