I have an app with multiple scenes. To render most of them, I don't need a stack maintained, hence am using navigator.replace(HomeScene).
Now, from 1 particular scene, say Scene 1, I push Scene 2, Then from Scene 2 I push Scene 3. Now I am 2 levels deep in the navigator. From here, if I go back to HomeScene using navigator.immediatelyResetRouteStack([HomeScene]), some of the images from HomeScene do not render. Here onwards, on every scene, images randomly are visible or invisible. No fixed pattern.
This happens majorly when I am deep into the stack, and rarely when there is only 1 level pushed to the stack.
Not sure if this is related to the Navigator or something else. Any suggestions?
I think I have found the solution to this.
It doesn't seem to be related to the Navigator. Basically, if there are many images on one single page, some images may not render due to large memory used. Adding android:largeHeap="true" under the <application > tag in the AndroidManifest.xml file does the trick!
Related
I have been working on using Drag and Drop with JavaFX, and one thing I notice is that items are given lowered opacity compared to their actual images, as well as the larger the image the made "Faded/transparent" the image gets. I am working on am application that can drag fairly large items which end up almost invisible when dragging, which defeats the purpose of using a DragView Image in the first place, and makes this unusable for larger items (the way I'm using the DragView I want the images to be a certain size compared to the scene in which I'm dragging onto).
My application essentially has 2 Windows (Stages) where the data is in one Stage and I get the item from a list and drag it onto the scene. The DragView image is a representation of the object going onto the scene, so when I drop the DragView Image, it gets dropped exactly into place on the scene, so the DragView is important to my overall application.
Just a NOTE: There is also backing data in my transfer in order to recreate the box, as well as additional data that gets transferred with the Drag and Drop.
I tried looking at the FX DragView Internal code but didn't find anything that sets the Opacity or anything like that, so one of my assumptions of "it's built into the OS" is something I keep thinking about, as lowered opacity is something I remember being built in, and when trying it it does happen, but very very slight, and not as bad as what I'm experiencing (Also possible that since the icons are much smaller they don't run into the "larger image opacity issue."
I am running Windows 7 64-Bit for those who are wondering.
My question is, is it possible to change the opacity settings of the Drag and Drop ImageView either via JavaFX or possibly Native with using something along the lines of JNI?
I don't have any example code at the moment, but can add if someone is interested, but I'm sure for those who know about Drag and Drop ImageViews should already know about the opacity.
Thank you all.
I m creating a THREE.js (latest version, r71) app, and sometimes I need to manually delete the 3D scene to display classic 2D content. So, what I do is clearing all variables like scene or renderer, and killing the WebGL context using renderer.forceContextLoss()
This method works fine on Firefox or Chrome, but it is not supported on Interner Explorer or Microsoft Edge, which cause multiple lags on my web page. I can't find a workaround to do this properly as I do in Firefox or Chrome.
If someone has a tip, feel free to tell me :)
Thanks
Try using two canvas tags and put one over the other as suggested here,
put them in a parent div tag then use the following css.
position:absolute;
left:0px;
top:0px;
EDIT:
In response to your comment, allow me to clarify my understanding.
You want to draw 2d and 3d.
You are resetting the webGL context.
You can't have 2 contexts to the same canvas simultaneously and I assume you want to use a a different context for your 2d content.
If this assumption is correct:
I am suggesting that you have 2 canvases and contexts simultaneously, one with your webGL context and 3d content, and another with the context you want to use for 2d content. Then you overlay these canvases by using absolute position, such that it looks like there is one canvas.
This means you never have to reload assets to switch contexts, just make sure you so the above canvas is transparent.
Also if you wrap the canvas in a div tag, it will not be at the top left of the page.
But If my assumption is wrong:
perhaps you don't want to use another context and just wish to clear the screen, in which case you should not call forceContextLoss()
If you wish to continue to use the webGL context, but clear the screen you should use clear()
The new Unity 4.6 comes with a new GUI, when I change de resolution on Unity the UI Button scales perfectly but when I test on the Nexus 7 device the Button looks too small. Any idea how to solve this?
Unity's new GUI system uses "anchors" to control how gui elements (like buttons) scale in relation to their parent container.
Unity has a tutorial video on how to use the new "Rect Transform" component (where the anchors are configured) here: http://unity3d.com/learn/tutorials/modules/beginner/ui/rect-transform.
The last half of the tutorial is all about anchors. That page has links to the entire tutorial series. It's not too long. You should watch the whole thing.
Specific to your question:
The anchors are visible in your first screen shot. They are those 4 little arrows at the top left of your button.
Right now, your button is only anchored by it's top left corner.
The two right anchors need to be dragged to the right so that the right edge of your button is anchored to a space inside its parent container.
Depending on your situation, the two bottom arrows may need to be dragged down so that the bottom edge of your button is anchored as well.
The video I linked above covers all this in detail.
Lastly, for the font size to scale nicely on different resolutions, you will need to add and configure a reference resolution component to the base canvas of your UI, as Ash-Bash32 wrote earlier.
Update: The best way to add a Reference Resolution component is through the inspector window for the base canvas in your UI.
1) click the "Add Component Button" at the bottom of the inspector.
2) type the word "Reference" in the search filter field.
3) select the "Reference Resolution" component in the search results.
The Reference Resolution is now renamed as Canvas Scaler.. Along with the renaming they have added many more features for the dynamicity of the Canvas. You can go through the Unity Doc of Canvas Scaler and also take a look at this article for a practical example of how and why to use Canvas Scaler. Also make sure you use the Anchor Points to good effect to make this more robust...
To Scale UI added the ReferenceResolution Component to the Canvas you want to scale.
P.S. Theres no Documention for ReferenceResolution
If you want the button to be the same size for all screens and resolutions, you have to add the canvas scaler component to the canvas and the set the screen match mode to: match width or height, here is the link to the docs, this helps a lot if you want to aim to different sizes or resolutions:
http://docs.unity3d.com/Manual/HOWTO-UIMultiResolution.html
This becomes giant and convoluted once you start laying things out in code AND using a canvas scaler, so I wish to provide a thorough answer to save someone the hours I went through.
First, don't use anchoredPosition to position anything, unless you fully realize it is a 0.0 to 1.0 number. Use the RectTransform localPosition to do the actual laying out, and remember it's in relation to the parent anchor. (I had to lay out a grid from the center)
Second, put a canvas scaler on the parent layout object AND the inner ui pieces. One makes the layout in the right position, the other will resize your elements so they actually show up right. You can't rely on the the parent unless the children also have scalers (and Graphic Raycasters to touch them).
Third, if you have a scaler, DON'T use Screen.width and height, instead assume the screen is the same value you put for the scalers (hopefully you used the same, or know what you're doing). The screen width always returns the actual device pixels, retina devices too, but the canvas scalers DO NOT account for this. This probably gives unity the one remaining way to find actual screen dpi if your game wants it. Edit: This paragraph applies to any parent canvas connected to the code doing your laying out. Not stray canvases, you can probably mix it up. Just remember unity's guidelines on performance with canvases.
Fourth, the canvas is still a bit buggy. Even with the above working, some things don't render until you delete and recreate a canvas, if you re-open the scene or it crashes. Otherwise, the above is the general "rules" I've found.
To center a "grid of things" you can't just use half of the canvas scaler's width or height, you have to calculate the height of your grid and set the offset by half of it, otherwise it will always be slightly off. I just added this as an extra tip. This calculation works for all orientations.
I'm an engineer and we are currently porting our Red5 + Flash game into a Node.js + Easeljs html5 application.
Basicly: it's a board game, not an rpg. The layer system means we have multiple canvasses, based on functionally. For example there is a static background stage, with images. There is a layer for just the timers.
At default, all canvas size is 1920x1080, if needed we downscale to fit to the resolution.
The first approach used kinetic.js, but the performance fallen when the game got complex. Then we switched to easel, because it's abstraction level is lower, so we can decide how to implement some more function, not just use the provided robust one.
I was optimistic, but now it's starting to show slowness again, that's why I want to look deeper inside and do fine performance tuning. (Of course everything is fine in Chrome, Firefox is the problem, but the game must run smoothly on all modern browser).
The main layer (stage) is the map, contains ~30 containers, in each there is a complex custom shape, ~10 images. The containers are listening to mouse events, like mouseover, out, click. Currently, for example on mouseover I refill the shape with gradient.
Somehow, when I use cache, like the way in the tuts the performance get even worse, so I assume I'm messing up something.
I collected some advanced questions:
In the described situation when can I use cache and how? I've already tried cache on init, cacheUpdate after fill with other color or gradient, then stage.update(). No impact.
If I have a static, never changing stage cache doesn't make sense on that layer, right?
What stage.update() exactly do? Triggering the full layer redraw? The doc mentions some kind of intelligent if changed then redraw effect.
If I want to refill a custom shape with new color or gradient I have to completely redraw its graphics, not just use a setFill method, right?
In easel there is no possibility to redraw just a container for example, so how can I manage to not update the whole stage, but just the one container that changed? I thought I can achieve this with caching, cache all containers the just update the one that changed, but this way didn't work at all for me.
Does it make sense to cache bitmap images? If there are custom shapes and images in a container what is better? Cache the container or just the shape in container.
I found a strange bug, or at least an interesting clue. My canvas layers totally overlapping. On the inferior layers the mouseover listening is working well, but the click isn't on the very same container/object.
How can I produce a click event propagation to overlapped layers those have click listeners? I've tried it with simple DOM, jquery, but the event objects were far away from what canvas listeners wanted to get.
In brief, methods and props I've already played with bare success when tried tuning: cache(), updateCache(), update(), mouseEnabled, snapToPixel, clear(), autoClear, enableMouseOver, useRAF, setFPS().
Any answer, suggestion, starting point appreciated.
UPDATE:
This free board game is a strategy game, so you are facing a world map, with ~30 territories. The custom shapes are the territories and a container holds a territory shape and the icons that should be over the territory. This container overlapping is minimal.
An example mouse event is a hover effect. The player navigate over the territory shape then the shape is getting recolored, resized, etc and a bubble showing up with details about the place.
Basically, maximum amount of 1-3 container could change at once (except the init phase -> all at this time). Not just the animations and recoloring slow in FF, but the listener delay is high too.
I wrote a change handler, so I only stage.update() up on tick the modified stages and the stages where an animation is running (tweenjs).
In my first approach I put every image to the container that could be needed at least once during the game, so I only set visible flags on images (not vectors).
Regarding caching:
There are some strange caching-issues, somehow the performance can drop with certain sizes of the caching rectangle: CreateJS / EaselJS Strange Performance with certain size shapes
(2) Depending on how often you call stage.update();
(3)
Each time the update method is called, the stage will tick any
descendants exposing a tick method (ex. BitmapAnimation) and render
its entire display list to the canvas. Any parameters passed to update
will be passed on to any onTick handlers.
=> Afaik it rerenders everything if not cached
(4) Yes.
(5) No. (I don't know of any)
(6) If the content's of the container don't change often, I'd cache the whole container, otherwise the container will be reconstructed every frame.
I have a question though: Why do you use multiple canvases? How many do you use? I could imagine that using multiple canvases might slow down the game.
How many sprites do you use in total?
2: if your layer or stage doesn't change, don't call stage.update() for that layer (so it doesn't gets rerendered, gives me a much lower cpu!)
For example, keep a global "stagechanged" variable and set this to true when something has changed:
createjs.Ticker.addEventListener("tick",
function() {
if (stagechanged)
{
stagechanged = false;
stage.update();
}
});
(or do you already use this, as stated in your "update"?)
4: I found a way to update for example the fill color :)
contaier1.shape1.graphics._fillInstructions[0].params[1] = '#FFFFFF';
(use chrome debugger to look at the _fillInstructions array to see which array position contains your color)
5: I found a way to just paint one container :)
//manual draw 1 component (!)
var a = stage.canvas.getContext("2d");
a.save();
container1.updateContext(a); //set position(x,y) on context
container1.draw(a);
a.restore();
I'm trying to implement a technique similar to the one in the ImageBrowserViewAppearance sample code from Apple (located here: http://developer.apple.com/library/mac/#samplecode/ImageBrowserViewAppearance/Introduction/Intro.html ), where CALayers are generated on top of the items in the IKImageBrowserView to customize the appearances of the objects in the image browser.
However, I'm getting a weird problem when I turn on garbage collection, and I can reproduce it in the Apple sample code. Simply turn on Garbage Collection in the target, and build and launch the ImageBrowserAppearance sample app. Then, add some photos to the image browser using the "Add Photos..." button.
Now, click on an empty portion of the IKImageBrowserView, and click and drag to start selecting multiple items in the browser view. As you drag the selection box around, you should notice that sometimes the pin and gloss overlay for some of the items flicker and briefly appear in the bottom-left corner of the IKImageBrowserView. All of the CALayers seem to do this occasionally, I've seen the white surrounding slide area flicker down into the bottom-left corner as well.
When I mimic the technique in my own code, I (not surprisingly) also can reproduce this badge flickering. However, this problem disappears when garbage collection is off.
Anybody have a clue what could be going wrong here? I'd like to use garbage collection in my app in conjunction with this technique, but the flickering is kind of annoying.
I bookmarked this a while back but Apple's changed the URL and the text. Fortunately I quoted it when I bookmarked it:
The Core Graphics APIs (Quartz 2D) see an approximately 25% reduction in drawing performance for applications compiled to use garbage collection.
That "25% reduction in drawing performance" text has been rewritten into a "slight overhead in code execution" and that was for 10.5. Perhaps Apple fixed it for 10.6. And you're talking Core Animation, not Core Graphics.
Still, Core Animation eventually has to talk to Core Graphics, and perhaps that performance issue hasn't gone away, and you're being bitten by it.
I fooled around with this a bit and can confirm I get the same behavior running the project with GC turned on. In fact, if you're patient enough and slowly change the selection one image at a time using the arrow keys, eventually it'll trigger the behavior and you can see the layers from one image in the view are displayed in the lower left corner instead of on top of the image. I haven't been able to find any sort of pattern as to when it happens, or any relation between which image is selected and which image has its layers missing. I'm assuming that for whatever reason, those layers are getting their frame origin set to {0, 0}, but heck if I know why.