I have a Maven project which produces a jar file that is meant to be used in a web service. It has integration tests which use the jetty-maven-plugin to run.
In order to run the integration tests on the compiled jar file, I've had to create a dependency with <systemPath>${project.build.directory}/${project.build.finalName}.${project.packaging}</systemPath>. The integration tests run as I had hoped, using the compiled jar file and correctly creating the web-app out of the src/test directory.
So in terms of this projects build, this setup works very well.
The problem is that the POM file, which is deployed during the release process, still has the systemPath dependency. This means that projects which use the jar are reporting an error during the build. The error says that the jar file "must specify an absolute path". These builds don't fail, but the logs are cluttered and misleading.
I'm looking to remove this systemPath from the POM which is deployed to our Maven repository. How can we do this?
For reference, here is the relevant portion of the project's POM.
<build>
<plugins>
<plugin>
<groupId>org.eclipse.jetty</groupId>
<artifactId>jetty-maven-plugin</artifactId>
<version>9.0.7.v20131107</version>
<configuration>
<webAppSourceDirectory>${project.basedir}/src/test/webapp</webAppSourceDirectory>
<classesDirectory>${project.build.testSourceDirectory}</classesDirectory>
<useTestClasspath>true</useTestClasspath>
</configuration>
<dependencies>
<dependency>
<groupId>${project.groupId}</groupId>
<artifactId>${project.artifactId}</artifactId>
<version>${project.version}</version>
<scope>system</scope>
<systemPath>${project.build.directory}/${project.build.finalName}.${project.packaging}</systemPath>
</dependency>
</dependencies>
<executions>
<execution>
<id>start-jetty</id>
<phase>pre-integration-test</phase>
<goals>
<goal>run</goal>
</goals>
<configuration>
<scanIntervalSeconds>0</scanIntervalSeconds>
<daemon>true</daemon>
</configuration>
</execution>
<execution>
<id>stop-jetty</id>
<phase>post-integration-test</phase>
<goals>
<goal>stop</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</build>
Jetty's documentation regarding <classesDirectory> reads:
Location of your compiled classes for the webapp. [...]
So, this should be ${project.build.testOutputDirectory} rather than ${project.build.testSourceDirectory}, shouldn't it?
<useTestClasspath> isn't mentioned in Jetty's doc.
Is it possible to install the dependency and use <scope>provided? Since with that:
[the dependency] is only available on the compilation and test classpath, and is not transitive.
The solution was a slight modification from Gerold Broser's answer.
Here are the relevant sections:
<plugin>
<groupId>org.eclipse.jetty</groupId>
<artifactId>jetty-maven-plugin</artifactId>
<version>9.1.5.v20140505</version>
<configuration>
<webAppSourceDirectory>${project.basedir}/src/test/webapp</webAppSourceDirectory>
<classesDirectory>${project.build.testOutputDirectory}</classesDirectory>
</configuration>
<dependencies>
<dependency>
<groupId>${project.groupId}</groupId>
<artifactId>${project.artifactId}</artifactId>
<version>${project.version}</version>
<scope>runtime</scope>
</dependency>
</dependencies>
</plugin>
Related
I have a Spring Boot application and I have created a Jar out of that. Following is my pom.xml:
<dependencies>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-web</artifactId>
</dependency>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-mail</artifactId>
</dependency>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-thymeleaf</artifactId>
</dependency>
<dependency>
<groupId>org.thymeleaf.extras</groupId>
<artifactId>thymeleaf-extras-java8time</artifactId>
<version>2.1.0.RELEASE</version>
</dependency>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-actuator</artifactId>
</dependency>
<!-- WebJars -->
<dependency>
<groupId>javax.mail</groupId>
<artifactId>mail</artifactId>
<version>1.4.7</version>
</dependency>
<dependency>
<groupId>com.google.code.gson</groupId>
<artifactId>gson</artifactId>
<version>2.6.2</version>
</dependency>
</dependencies>
<build>
<plugins>
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
</plugin>
</plugins>
</build>
I want to use this Jar in my other application so added this jar to my application. But when I am calling a method in that Jar, it is throwing a ClassNotFoundException.
How can I fix this issue? How can I add a dependency to a Spring Boot JAR?
By default, Spring Boot repackages your JAR into an executable JAR, and it does that by putting all of your classes inside BOOT-INF/classes, and all of the dependent libraries inside BOOT-INF/lib. The consequence of creating this fat JAR is that you can no longer use it as a dependency for other projects.
From Custom repackage classifier:
By default, the repackage goal will replace the original artifact with the repackaged one. That's a sane behaviour for modules that represent an app but if your module is used as a dependency of another module, you need to provide a classifier for the repackaged one.
The reason for that is that application classes are packaged in BOOT-INF/classes so that the dependent module cannot load a repackaged jar's classes.
If you want to keep the original main artifact in order to use it as a dependency, you can add a classifier in the repackage goal configuration:
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<version>1.4.1.RELEASE</version>
<executions>
<execution>
<goals>
<goal>repackage</goal>
</goals>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
</plugin>
With this configuration, the Spring Boot Maven Plugin will create 2 JARs: the main one will be the same as a usual Maven project, while the second one will have the classifier appended and be the executable JAR.
Tunaki's answer is correct but doesn't work in Spring Boot 2.
Spring Boot 1.x
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<version>1.5.20.RELEASE</version>
<executions>
<execution>
<goals>
<goal>repackage</goal>
</goals>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
...
</plugin>
Read more
Spring Boot 2.x
If you are using spring-boot-starter-parent, the repackage goal is executed automatically in an execution with id repackage. In that setup, only the configuration should be specified as shown in the following example:
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<executions>
<execution>
<id>repackage</id>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
...
</plugin>
Read more
For Spring Boot 2 #Tunaki's answer must be modified a bit according to the documentation if spring-boot-starter-parent is used as parent :
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<executions>
<execution>
<id>repackage</id>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
Take note of the extra <id>repackage</id> necessary to overwrite to execution from the spring-boot-starter-parent.
if you want to use the spring-boot project as a dependency and same time want to run as a spring-boot jar then use the below configuration. by the below configuration, you can achieve two goals.
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<executions>
<execution>
<id>build information</id>
<goals>
<goal>build-info</goal>
</goals>
</execution>
<execution>
<id>repackage</id>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
</plugin>
This configuration creates two jars as shown below example screenshot:
What #Tunaki stated was mostly correct but the one missing part based on your original question was:
This throwing ClassNotFoundException. The External jar's used in
spring boot application is missing.
This is due to the fact that the FatJAR created from the maven packaging has the dependent libraries specified in a specific location that works for how Spring Boot executes the application. If you are just adding the JAR to another application's classpath then you should do what #Tunaki said and also include the dependent JAR files to the classpath. The best way to work with this is to use the Maven Dependency Plugin specifically targetting the dependency:copy-dependencies mojo to download all the dependencies into a folder that you can then specify as a library path when compiling the other application.
You can extend your project by maven-assembly-plugin
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-assembly-plugin</artifactId>
<version>3.1.0</version>
<configuration>
<descriptorRefs>
<descriptorRef>jar-with-dependencies</descriptorRef>
</descriptorRefs>
</configuration>
<executions>
<execution>
<id>make-assembly</id>
<phase>package</phase>
<goals>
<goal>single</goal>
</goals>
</execution>
</executions>
</plugin>
After the build you will get 3 jars. The main one will be the same as a usual Maven project, while the second one will have the classifier appended with exec and be the executable JAR. The third jar name will be appended by jar-with-dependencies and will contain your classes with classes added as dependencies in your spring boot application(spring-boot-starter-web, thymeleaf,...), so into the pom of the application where you want to add that project as dependencie you won't have to add dependencies from spring boot project.
Use the build section provided below, it will do three things:
Create the spring boot jar using spring-boot-maven-plugin
Create a normal jar with your source code compiled classes using maven-assembly-plugin
Install the normal jar into the m2 folder locally
If you want to deploy the normal jar into a remote repository, configure the deploy plugin
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<build>
<plugins>
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-assembly-plugin</artifactId>
<executions>
<execution>
<phase>package</phase>
<goals>
<goal>single</goal>
</goals>
<configuration>
<appendAssemblyId>true</appendAssemblyId>
<descriptors>
<descriptor>src/main/resources/sources-jar-build.xml</descriptor>
</descriptors>
<finalName>${pom.artifactId}-${pom.version}</finalName>
</configuration>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-install-plugin</artifactId>
<executions>
<execution>
<id>install-file</id>
<goals>
<goal>install-file</goal>
</goals>
<configuration>
<file>${pom.artifactId}-${pom.version}</file>
<artifactId>${pom.artifactId}</artifactId>
<groupId>${pom.groupId}</groupId>
<version>${pom.version}</version>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build>
Place the below content in a file named "sources-jar-build.xml", into resources folder:
<assembly
xmlns="http://maven.apache.org/plugins/maven-assembly-plugin/assembly/1.1.2"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/plugins/maven-assembly-plugin/assembly/1.1.2 http://maven.apache.org/xsd/assembly-1.1.2.xsd">
<id>sources</id>
<includeBaseDirectory>false</includeBaseDirectory>
<formats>
<format>jar</format>
</formats>
<fileSets>
<fileSet>
<directory>${project.basedir}/target/classes</directory>
<outputDirectory>/</outputDirectory>
</fileSet>
</fileSets>
</assembly>
use below plugin for spring boot version 2.*
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<version>2.2.1.RELEASE</version>
<configuration>
<classifier>exec</classifier>
</configuration>
</plugin>
All existing answers are made under the assumption that the Spring Boot project upon which another project should depend is an application, which is fair enough since the question is phrased like that.
But if the underlying project is meant to be used as a library only, i.e. it contains no (sensible) Main class, there is obviously no executable code that needs to be repackaged at all.
So in that case, it makes more sense to skip the repackaging entirely like this:
<plugins>
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<executions>
<execution>
<id>repackage</id>
<configuration>
<skip>true</skip>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
I used version 2.2.5 and it's working. add it to your pom.xml
<plugins>
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<version>2.2.5.RELEASE</version>
<executions>
<execution>
<id>repackage</id>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
You can setup your projects so that the batch launcher relies on a jar, which would be shared with your other application.
Said differently, as per your initial request :
I want to use this Jar in my other application so added this jar to my application.
Let's say your jar is your project A, and your application is your project B.
Now, what I suggest, is that you remove the launching part from A ;
then you put it into a new project C, that would embed Spring Boot, and that would rely almost totally on A.
Then, since A is now a simple jar, B can use it as a dependency.
any project if you want add as a dependency you need that project <groupId>,<artifactId>,<version>, with these details you can add your project as a dependency in another module or application
for ex: your application pom details
<project
<groupId>com.sample</groupId>
<artifactId>sampleapp</artifactId>
<version>1.0</version>
<packaging>jar</packaging>
</project>`
your dependency as like below
<dependency>
<groupId>com.sample</groupId>
<artifactId>sampleapp</artifactId>
<version>1.0</version>
</dependency>
I have a Spring Boot application and I have created a Jar out of that. Following is my pom.xml:
<dependencies>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-web</artifactId>
</dependency>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-mail</artifactId>
</dependency>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-thymeleaf</artifactId>
</dependency>
<dependency>
<groupId>org.thymeleaf.extras</groupId>
<artifactId>thymeleaf-extras-java8time</artifactId>
<version>2.1.0.RELEASE</version>
</dependency>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-actuator</artifactId>
</dependency>
<!-- WebJars -->
<dependency>
<groupId>javax.mail</groupId>
<artifactId>mail</artifactId>
<version>1.4.7</version>
</dependency>
<dependency>
<groupId>com.google.code.gson</groupId>
<artifactId>gson</artifactId>
<version>2.6.2</version>
</dependency>
</dependencies>
<build>
<plugins>
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
</plugin>
</plugins>
</build>
I want to use this Jar in my other application so added this jar to my application. But when I am calling a method in that Jar, it is throwing a ClassNotFoundException.
How can I fix this issue? How can I add a dependency to a Spring Boot JAR?
By default, Spring Boot repackages your JAR into an executable JAR, and it does that by putting all of your classes inside BOOT-INF/classes, and all of the dependent libraries inside BOOT-INF/lib. The consequence of creating this fat JAR is that you can no longer use it as a dependency for other projects.
From Custom repackage classifier:
By default, the repackage goal will replace the original artifact with the repackaged one. That's a sane behaviour for modules that represent an app but if your module is used as a dependency of another module, you need to provide a classifier for the repackaged one.
The reason for that is that application classes are packaged in BOOT-INF/classes so that the dependent module cannot load a repackaged jar's classes.
If you want to keep the original main artifact in order to use it as a dependency, you can add a classifier in the repackage goal configuration:
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<version>1.4.1.RELEASE</version>
<executions>
<execution>
<goals>
<goal>repackage</goal>
</goals>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
</plugin>
With this configuration, the Spring Boot Maven Plugin will create 2 JARs: the main one will be the same as a usual Maven project, while the second one will have the classifier appended and be the executable JAR.
Tunaki's answer is correct but doesn't work in Spring Boot 2.
Spring Boot 1.x
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<version>1.5.20.RELEASE</version>
<executions>
<execution>
<goals>
<goal>repackage</goal>
</goals>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
...
</plugin>
Read more
Spring Boot 2.x
If you are using spring-boot-starter-parent, the repackage goal is executed automatically in an execution with id repackage. In that setup, only the configuration should be specified as shown in the following example:
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<executions>
<execution>
<id>repackage</id>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
...
</plugin>
Read more
For Spring Boot 2 #Tunaki's answer must be modified a bit according to the documentation if spring-boot-starter-parent is used as parent :
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<executions>
<execution>
<id>repackage</id>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
Take note of the extra <id>repackage</id> necessary to overwrite to execution from the spring-boot-starter-parent.
if you want to use the spring-boot project as a dependency and same time want to run as a spring-boot jar then use the below configuration. by the below configuration, you can achieve two goals.
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<executions>
<execution>
<id>build information</id>
<goals>
<goal>build-info</goal>
</goals>
</execution>
<execution>
<id>repackage</id>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
</plugin>
This configuration creates two jars as shown below example screenshot:
What #Tunaki stated was mostly correct but the one missing part based on your original question was:
This throwing ClassNotFoundException. The External jar's used in
spring boot application is missing.
This is due to the fact that the FatJAR created from the maven packaging has the dependent libraries specified in a specific location that works for how Spring Boot executes the application. If you are just adding the JAR to another application's classpath then you should do what #Tunaki said and also include the dependent JAR files to the classpath. The best way to work with this is to use the Maven Dependency Plugin specifically targetting the dependency:copy-dependencies mojo to download all the dependencies into a folder that you can then specify as a library path when compiling the other application.
You can extend your project by maven-assembly-plugin
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-assembly-plugin</artifactId>
<version>3.1.0</version>
<configuration>
<descriptorRefs>
<descriptorRef>jar-with-dependencies</descriptorRef>
</descriptorRefs>
</configuration>
<executions>
<execution>
<id>make-assembly</id>
<phase>package</phase>
<goals>
<goal>single</goal>
</goals>
</execution>
</executions>
</plugin>
After the build you will get 3 jars. The main one will be the same as a usual Maven project, while the second one will have the classifier appended with exec and be the executable JAR. The third jar name will be appended by jar-with-dependencies and will contain your classes with classes added as dependencies in your spring boot application(spring-boot-starter-web, thymeleaf,...), so into the pom of the application where you want to add that project as dependencie you won't have to add dependencies from spring boot project.
Use the build section provided below, it will do three things:
Create the spring boot jar using spring-boot-maven-plugin
Create a normal jar with your source code compiled classes using maven-assembly-plugin
Install the normal jar into the m2 folder locally
If you want to deploy the normal jar into a remote repository, configure the deploy plugin
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<build>
<plugins>
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-assembly-plugin</artifactId>
<executions>
<execution>
<phase>package</phase>
<goals>
<goal>single</goal>
</goals>
<configuration>
<appendAssemblyId>true</appendAssemblyId>
<descriptors>
<descriptor>src/main/resources/sources-jar-build.xml</descriptor>
</descriptors>
<finalName>${pom.artifactId}-${pom.version}</finalName>
</configuration>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-install-plugin</artifactId>
<executions>
<execution>
<id>install-file</id>
<goals>
<goal>install-file</goal>
</goals>
<configuration>
<file>${pom.artifactId}-${pom.version}</file>
<artifactId>${pom.artifactId}</artifactId>
<groupId>${pom.groupId}</groupId>
<version>${pom.version}</version>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build>
Place the below content in a file named "sources-jar-build.xml", into resources folder:
<assembly
xmlns="http://maven.apache.org/plugins/maven-assembly-plugin/assembly/1.1.2"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/plugins/maven-assembly-plugin/assembly/1.1.2 http://maven.apache.org/xsd/assembly-1.1.2.xsd">
<id>sources</id>
<includeBaseDirectory>false</includeBaseDirectory>
<formats>
<format>jar</format>
</formats>
<fileSets>
<fileSet>
<directory>${project.basedir}/target/classes</directory>
<outputDirectory>/</outputDirectory>
</fileSet>
</fileSets>
</assembly>
use below plugin for spring boot version 2.*
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<version>2.2.1.RELEASE</version>
<configuration>
<classifier>exec</classifier>
</configuration>
</plugin>
All existing answers are made under the assumption that the Spring Boot project upon which another project should depend is an application, which is fair enough since the question is phrased like that.
But if the underlying project is meant to be used as a library only, i.e. it contains no (sensible) Main class, there is obviously no executable code that needs to be repackaged at all.
So in that case, it makes more sense to skip the repackaging entirely like this:
<plugins>
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<executions>
<execution>
<id>repackage</id>
<configuration>
<skip>true</skip>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
I used version 2.2.5 and it's working. add it to your pom.xml
<plugins>
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<version>2.2.5.RELEASE</version>
<executions>
<execution>
<id>repackage</id>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
You can setup your projects so that the batch launcher relies on a jar, which would be shared with your other application.
Said differently, as per your initial request :
I want to use this Jar in my other application so added this jar to my application.
Let's say your jar is your project A, and your application is your project B.
Now, what I suggest, is that you remove the launching part from A ;
then you put it into a new project C, that would embed Spring Boot, and that would rely almost totally on A.
Then, since A is now a simple jar, B can use it as a dependency.
any project if you want add as a dependency you need that project <groupId>,<artifactId>,<version>, with these details you can add your project as a dependency in another module or application
for ex: your application pom details
<project
<groupId>com.sample</groupId>
<artifactId>sampleapp</artifactId>
<version>1.0</version>
<packaging>jar</packaging>
</project>`
your dependency as like below
<dependency>
<groupId>com.sample</groupId>
<artifactId>sampleapp</artifactId>
<version>1.0</version>
</dependency>
I have a Spring Boot application and I have created a Jar out of that. Following is my pom.xml:
<dependencies>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-web</artifactId>
</dependency>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-mail</artifactId>
</dependency>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-thymeleaf</artifactId>
</dependency>
<dependency>
<groupId>org.thymeleaf.extras</groupId>
<artifactId>thymeleaf-extras-java8time</artifactId>
<version>2.1.0.RELEASE</version>
</dependency>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-actuator</artifactId>
</dependency>
<!-- WebJars -->
<dependency>
<groupId>javax.mail</groupId>
<artifactId>mail</artifactId>
<version>1.4.7</version>
</dependency>
<dependency>
<groupId>com.google.code.gson</groupId>
<artifactId>gson</artifactId>
<version>2.6.2</version>
</dependency>
</dependencies>
<build>
<plugins>
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
</plugin>
</plugins>
</build>
I want to use this Jar in my other application so added this jar to my application. But when I am calling a method in that Jar, it is throwing a ClassNotFoundException.
How can I fix this issue? How can I add a dependency to a Spring Boot JAR?
By default, Spring Boot repackages your JAR into an executable JAR, and it does that by putting all of your classes inside BOOT-INF/classes, and all of the dependent libraries inside BOOT-INF/lib. The consequence of creating this fat JAR is that you can no longer use it as a dependency for other projects.
From Custom repackage classifier:
By default, the repackage goal will replace the original artifact with the repackaged one. That's a sane behaviour for modules that represent an app but if your module is used as a dependency of another module, you need to provide a classifier for the repackaged one.
The reason for that is that application classes are packaged in BOOT-INF/classes so that the dependent module cannot load a repackaged jar's classes.
If you want to keep the original main artifact in order to use it as a dependency, you can add a classifier in the repackage goal configuration:
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<version>1.4.1.RELEASE</version>
<executions>
<execution>
<goals>
<goal>repackage</goal>
</goals>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
</plugin>
With this configuration, the Spring Boot Maven Plugin will create 2 JARs: the main one will be the same as a usual Maven project, while the second one will have the classifier appended and be the executable JAR.
Tunaki's answer is correct but doesn't work in Spring Boot 2.
Spring Boot 1.x
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<version>1.5.20.RELEASE</version>
<executions>
<execution>
<goals>
<goal>repackage</goal>
</goals>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
...
</plugin>
Read more
Spring Boot 2.x
If you are using spring-boot-starter-parent, the repackage goal is executed automatically in an execution with id repackage. In that setup, only the configuration should be specified as shown in the following example:
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<executions>
<execution>
<id>repackage</id>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
...
</plugin>
Read more
For Spring Boot 2 #Tunaki's answer must be modified a bit according to the documentation if spring-boot-starter-parent is used as parent :
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<executions>
<execution>
<id>repackage</id>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
Take note of the extra <id>repackage</id> necessary to overwrite to execution from the spring-boot-starter-parent.
if you want to use the spring-boot project as a dependency and same time want to run as a spring-boot jar then use the below configuration. by the below configuration, you can achieve two goals.
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<executions>
<execution>
<id>build information</id>
<goals>
<goal>build-info</goal>
</goals>
</execution>
<execution>
<id>repackage</id>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
</plugin>
This configuration creates two jars as shown below example screenshot:
What #Tunaki stated was mostly correct but the one missing part based on your original question was:
This throwing ClassNotFoundException. The External jar's used in
spring boot application is missing.
This is due to the fact that the FatJAR created from the maven packaging has the dependent libraries specified in a specific location that works for how Spring Boot executes the application. If you are just adding the JAR to another application's classpath then you should do what #Tunaki said and also include the dependent JAR files to the classpath. The best way to work with this is to use the Maven Dependency Plugin specifically targetting the dependency:copy-dependencies mojo to download all the dependencies into a folder that you can then specify as a library path when compiling the other application.
You can extend your project by maven-assembly-plugin
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-assembly-plugin</artifactId>
<version>3.1.0</version>
<configuration>
<descriptorRefs>
<descriptorRef>jar-with-dependencies</descriptorRef>
</descriptorRefs>
</configuration>
<executions>
<execution>
<id>make-assembly</id>
<phase>package</phase>
<goals>
<goal>single</goal>
</goals>
</execution>
</executions>
</plugin>
After the build you will get 3 jars. The main one will be the same as a usual Maven project, while the second one will have the classifier appended with exec and be the executable JAR. The third jar name will be appended by jar-with-dependencies and will contain your classes with classes added as dependencies in your spring boot application(spring-boot-starter-web, thymeleaf,...), so into the pom of the application where you want to add that project as dependencie you won't have to add dependencies from spring boot project.
Use the build section provided below, it will do three things:
Create the spring boot jar using spring-boot-maven-plugin
Create a normal jar with your source code compiled classes using maven-assembly-plugin
Install the normal jar into the m2 folder locally
If you want to deploy the normal jar into a remote repository, configure the deploy plugin
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<build>
<plugins>
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-assembly-plugin</artifactId>
<executions>
<execution>
<phase>package</phase>
<goals>
<goal>single</goal>
</goals>
<configuration>
<appendAssemblyId>true</appendAssemblyId>
<descriptors>
<descriptor>src/main/resources/sources-jar-build.xml</descriptor>
</descriptors>
<finalName>${pom.artifactId}-${pom.version}</finalName>
</configuration>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-install-plugin</artifactId>
<executions>
<execution>
<id>install-file</id>
<goals>
<goal>install-file</goal>
</goals>
<configuration>
<file>${pom.artifactId}-${pom.version}</file>
<artifactId>${pom.artifactId}</artifactId>
<groupId>${pom.groupId}</groupId>
<version>${pom.version}</version>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build>
Place the below content in a file named "sources-jar-build.xml", into resources folder:
<assembly
xmlns="http://maven.apache.org/plugins/maven-assembly-plugin/assembly/1.1.2"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/plugins/maven-assembly-plugin/assembly/1.1.2 http://maven.apache.org/xsd/assembly-1.1.2.xsd">
<id>sources</id>
<includeBaseDirectory>false</includeBaseDirectory>
<formats>
<format>jar</format>
</formats>
<fileSets>
<fileSet>
<directory>${project.basedir}/target/classes</directory>
<outputDirectory>/</outputDirectory>
</fileSet>
</fileSets>
</assembly>
use below plugin for spring boot version 2.*
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<version>2.2.1.RELEASE</version>
<configuration>
<classifier>exec</classifier>
</configuration>
</plugin>
All existing answers are made under the assumption that the Spring Boot project upon which another project should depend is an application, which is fair enough since the question is phrased like that.
But if the underlying project is meant to be used as a library only, i.e. it contains no (sensible) Main class, there is obviously no executable code that needs to be repackaged at all.
So in that case, it makes more sense to skip the repackaging entirely like this:
<plugins>
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<executions>
<execution>
<id>repackage</id>
<configuration>
<skip>true</skip>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
I used version 2.2.5 and it's working. add it to your pom.xml
<plugins>
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<version>2.2.5.RELEASE</version>
<executions>
<execution>
<id>repackage</id>
<configuration>
<classifier>exec</classifier>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
You can setup your projects so that the batch launcher relies on a jar, which would be shared with your other application.
Said differently, as per your initial request :
I want to use this Jar in my other application so added this jar to my application.
Let's say your jar is your project A, and your application is your project B.
Now, what I suggest, is that you remove the launching part from A ;
then you put it into a new project C, that would embed Spring Boot, and that would rely almost totally on A.
Then, since A is now a simple jar, B can use it as a dependency.
any project if you want add as a dependency you need that project <groupId>,<artifactId>,<version>, with these details you can add your project as a dependency in another module or application
for ex: your application pom details
<project
<groupId>com.sample</groupId>
<artifactId>sampleapp</artifactId>
<version>1.0</version>
<packaging>jar</packaging>
</project>`
your dependency as like below
<dependency>
<groupId>com.sample</groupId>
<artifactId>sampleapp</artifactId>
<version>1.0</version>
</dependency>
I am using maven for my current projects. Now, I have a war dependency:
<dependency>
<groupId>org.dojotoolkit</groupId>
<artifactId>dojo-war</artifactId>
<version>1.8.1</version>
<type>war</type>
<scope>runtime</scope>
</dependency>
I don't have any problem when I built the war artifact. For this, I have added this plugin:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-war-plugin</artifactId>
<version>2.1.1</version>
<configuration>
<overlays>
<overlay>
<groupId>org.dojotoolkit</groupId>
<artifactId>dojo-war</artifactId>
<targetPath>js/dojo-1.8.1</targetPath>
<excludes>
<exclude>WEB-INF/**</exclude>
<exclude>META-INF/**</exclude>
</excludes>
</overlay>
</overlays>
</configuration>
</plugin>
But, when I run the following mvn command mvn tomcat7:run I can not see any javascript resource. It looks like war dependency had not been added.
Could someone help me with that?
Thanks in advance.
Welcome to Stack Overflow Emelendez.
You should read this post : http://webtide.intalio.com/2008/07/dojo-toolkit-maven-repository/
Indeed, the dojo-war dependencies allows you to add some files to your sources, but you must specify some extra actions to include it in the final war.
Dependencies, in Maven, can only be in the language you try to compile (well it's not really exact, but this is enough here). If you want to add other resources (files, images, javascript), contained in a zip/war/targz, you must explicitely extract them. This is what is mentionned in the link I provided previously :
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-dependency-plugin</artifactId>
<executions>
<execution>
<id>unpack dojo</id>
<phase>generate-sources</phase>
<goals>
<goal>unpack</goal>
</goals>
<configuration>
<artifactItems>
<artifactItem>
<groupId>org.dojotoolkit</groupId>
<artifactId>dojo</artifactId>
<version>${project.version}</version>
<type>zip</type>
</artifactItem>
</artifactItems>
<outputDirectory>${project.build.directory}/dojo</outputDirectory>
</configuration>
</execution>
</executions>
</plugin>
(Be careful, I'm not sure that this configuration is exact, your dependencie seems to be dojo-war according to your pom.xml, and not dojo as per doc said)
This will extract dojo libs into output directory, and then into your war.
I have a project, in which I want to invoke another Jar file in M2 repo during the post execution phase of the current project.
Sample skeleton of my POM
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>exec-maven-plugin</artifactId>
<version>1.1</version>
<executions>
<execution>
<id>exec-one</id>
<phase>verify</phase>
<configuration>
executable>java</executable>
<arguments> <argument>-jar</argument>
<argument>JarToInvoke.jar</argument>
</arguments>
<**workingDirectory**>/C:/path to repo</workingDirectory>
</configuration>
<goals>
<goal>exec</goal>
</goals>
</execution>
</executions>
<dependencies> <dependency>
<groupId>GroupId of JarToInvoke</groupId>
<artifactId>JarToInvoke</artifactId>
<version>1.0.0-SNAPSHOT</version>
</dependency>
</dependencies>
</plugin>
</plugins>
I tried with maven-exec-plugin, but having the following issues;
Where I need to specify to JarToInvoke dependency ? As a project dependency or as a exec-plugin dependency ?
With hard coding the working directory(/C:/path to repo), I am able to invoke the JarToInvoke artifact. But it is not a good solution, because finally this project should run in any m/c with different OS's. So how can I make the exec-plugin to search for the JarToInvoke artifact in the M2 repo of the project(default classpath) ?
3.While hard coding the M2 repo path in the working directory, I was able to invoke the JarToInvoke artifact. But while running the JarToInvoke artifact, it throws another dependency issue, some of the log4j dependencies to the JarToInvoke could not find. I made the JarToInvoke as a shaded jar and it work as expected. But it is not a permanent or good solution(Because the shaded jar size is of 35 MB). How can I instruct the exec-plugin to look for the dependent Jars in M2 repo.
Please share your suggestions. Thanks in Advance.
This example page from the Exec plugin's documentation describes what you want I think.
If you could use the exec:java goal instead of exec:exec, finding the JVM is taken care of for you. You can also pull in either plugin dependencies or project dependencies by changing the includeProjectDependencies and includePluginDependencies configuration options of the plugin.
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>exec-maven-plugin</artifactId>
<version>1.1</version>
<executions>
<execution>
<id>exec-one</id>
<phase>verify</phase>
<configuration>
<includeProjectDependencies>false</includeProjectDependencies>
<includePluginDependencies>true</includePluginDependencies>
<executableDependency>
<groupId>GroupId of JarToInvoke</groupId>
<artifactId>JarToInvoke</artifactId>
</executableDependency>
<!-- Look up the main class from the manifest inside your dependency's JAR -->
<mainClass>com.example.Main</mainClass>
<arguments>
<!-- Add any arguments after your JAR here --->
</arguments>
</configuration>
<goals>
<goal>java</goal>
</goals>
</execution>
</executions>
<dependencies>
<dependency>
<groupId>GroupId of JarToInvoke</groupId>
<artifactId>JarToInvoke</artifactId>
<version>1.0.0-SNAPSHOT</version>
</dependency>
</dependencies>
</plugin>
The only disadvantage is that you have to explicitly specify the main class in the JAR to run. You can look this up by opening up the manifest in the dependency JAR and read the Main-Class attribute.
If you really need to use exec:exec, you could use the Maven Dependency Plugin's copy-dependencies goal to copy dependencies from your local repository to a predefined location (such as ${project.build.directory}/exec-jars) and then you can feed this directory in the exec plugin's workingDirectory configuration option.
Probably an easier way to locate the absolute path to the jar file would be to use maven-dependency-plugin with properties goal.
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-dependency-plugin</artifactId>
<version>2.3</version>
<executions>
<execution>
<goals>
<goal>properties</goal>
</goals>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>exec-maven-plugin</artifactId>
<version>1.1</version>
<executions>
<execution>
<id>exec-one</id>
<phase>verify</phase>
<configuration>
<executable>java</executable>
<arguments>
<argument>-jar</argument>
<argument>${GroupIdofJarToInvoke:JarToInvoke:jar}</argument>
</arguments>
<workingDirectory>/C:/path to repo</workingDirectory>
</configuration>
<goals>
<goal>exec</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
<dependencies>
<dependency>
<groupId>GroupIdofJarToInvoke</groupId>
<artifactId>JarToInvoke</artifactId>
<version>1.0.0-SNAPSHOT</version>
</dependency>
<dependencies>