We can install MongoDB by placing the below code in shell script file
if [ ! -f /usr/bin/mongod ]; then<br>
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 7F0CEB10<br>
echo "deb http://repo.mongodb.org/apt/ubuntu "$(lsb_release -sc)"/mongodb-org/3.0 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-3.0.list<br>
sudo apt-get -y update
sudo apt-get install -y mongodb-org<br>
else
echo "mongo db already installed. Skipping..."
fi
I just change it a little bit and tested on Ubuntu 18.04 LTS.
#!/bin/bash
if [ ! -f /usr/bin/mongod ]
then
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 9DA31620334BD75D9DCB49F368818C72E52529D4
echo "deb [ arch=amd64 ] https://repo.mongodb.org/apt/ubuntu bionic/mongodb-org/4.0 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-4.0.list
sudo apt-get update -y
sudo apt-get install mongodb-org -y
sudo mkdir -p /data/db
sudo chown -R $USER /data/db
sudo chmod -R go+w /data/db
else
echo "mongo db already installed. Skipping..."
fi
mongod
Related
I'm using Laravel Sail with this Dockerfile content
FROM ubuntu:22.04
LABEL maintainer="Taylor Otwell"
ARG WWWGROUP
ARG NODE_VERSION=16
ARG POSTGRES_VERSION=14
WORKDIR /var/www/html
ENV DEBIAN_FRONTEND noninteractive
ENV TZ=UTC
RUN apt-get update \
&& apt-get install -y cron
RUN ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone
RUN apt-get update \
&& apt-get install -y gnupg gosu curl ca-certificates zip unzip git supervisor sqlite3 libcap2-bin libpng-dev python2 \
&& mkdir -p ~/.gnupg \
&& chmod 600 ~/.gnupg \
&& echo "disable-ipv6" >> ~/.gnupg/dirmngr.conf \
&& echo "keyserver hkp://keyserver.ubuntu.com:80" >> ~/.gnupg/dirmngr.conf \
&& gpg --recv-key 0x14aa40ec0831756756d7f66c4f4ea0aae5267a6c \
&& gpg --export 0x14aa40ec0831756756d7f66c4f4ea0aae5267a6c > /usr/share/keyrings/ppa_ondrej_php.gpg \
&& echo "deb [signed-by=/usr/share/keyrings/ppa_ondrej_php.gpg] https://ppa.launchpadcontent.net/ondrej/php/ubuntu jammy main" > /etc/apt/sources.list.d/ppa_ondrej_php.list \
&& apt-get update \
&& apt-get install -y php8.1-cli php8.1-dev \
php8.1-pgsql php8.1-sqlite3 php8.1-gd \
php8.1-curl \
php8.1-imap php8.1-mysql php8.1-mbstring \
php8.1-xml php8.1-zip php8.1-bcmath php8.1-soap \
php8.1-intl php8.1-readline \
php8.1-ldap \
php8.1-msgpack php8.1-igbinary php8.1-redis php8.1-swoole \
php8.1-memcached php8.1-pcov php8.1-xdebug \
&& php -r "readfile('https://getcomposer.org/installer');" | php -- --install-dir=/usr/bin/ --filename=composer \
&& curl -sLS https://deb.nodesource.com/setup_$NODE_VERSION.x | bash - \
&& apt-get install -y nodejs \
&& npm install -g npm \
&& curl -sS https://dl.yarnpkg.com/debian/pubkey.gpg | gpg --dearmor | tee /usr/share/keyrings/yarn.gpg >/dev/null \
&& echo "deb [signed-by=/usr/share/keyrings/yarn.gpg] https://dl.yarnpkg.com/debian/ stable main" > /etc/apt/sources.list.d/yarn.list \
&& curl -sS https://www.postgresql.org/media/keys/ACCC4CF8.asc | gpg --dearmor | tee /usr/share/keyrings/pgdg.gpg >/dev/null \
&& echo "deb [signed-by=/usr/share/keyrings/pgdg.gpg] http://apt.postgresql.org/pub/repos/apt jammy-pgdg main" > /etc/apt/sources.list.d/pgdg.list \
&& apt-get update \
&& apt-get install -y yarn \
&& apt-get install -y mysql-client \
&& apt-get install -y postgresql-client-$POSTGRES_VERSION \
&& apt-get -y autoremove \
&& apt-get clean \
&& rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
RUN setcap "cap_net_bind_service=+ep" /usr/bin/php8.1
RUN groupadd --force -g 1000 sailRoot
RUN useradd -ms /bin/bash --no-user-group -g 1000 -u 1337 sailRoot
RUN usermod -aG sudo sail
RUN usermod -aG sudo sailRoot
COPY scheduler /etc/cron.d/scheduler
RUN chmod 0644 /etc/cron.d/scheduler \
&& crontab /etc/cron.d/scheduler
COPY start-container /usr/local/bin/start-container
COPY supervisord.conf /etc/supervisor/conf.d/supervisord.conf
COPY php.ini /etc/php/8.1/cli/conf.d/99-sail.ini
RUN chmod +x /usr/local/bin/start-container
RUN chown -R www-data:www-data /var/www
EXPOSE 8000
ENTRYPOINT ["start-container"]
Here's start-container entrypoint
#!/usr/bin/env bash
if [ ! -z "1000" ]; then
usermod -u 1000 sail
fi
if [ ! -d /.composer ]; then
mkdir /.composer
fi
chmod -R ugo+rw /.composer
if [ $# -gt 0 ]; then
exec gosu 1000 "$#"
else
exec /usr/bin/supervisord -c /etc/supervisor/conf.d/supervisord.conf
fi
set -xe
cd /var/www/html
chmod -R 755 app
chmod -R 755 public
chmod -R 755 config
chmod -R 755 storage
chmod -R 777 storage/logs
chmod -R 755 database
chmod -R 755 bootstrap
chmod -R 777 resources
chmod -R 755 routes
chmod -R 755 composer.json
chmod -R 755 composer.lock
But if Laravel tries to create a new log file I get
The stream or file "/var/www/html/storage/logs/laravel-2022-11-05.log" could not be opened in append mode: Failed to open stream: Permission denied
How to solve this permission problem? Now I fix it manually by using SSH chmod -R 777 storage/logs but need a better solution via docker.
I have a Laravel Sail Project that runs without issues on my Mac Pro from 2019
I just got a M1 from 2020, cloned my project and get this error by using
Sail Build
E: Couldn't find any package by regex 'php8.1-xdebug'
I also tried:
Sail Up
Which leads to
At the time the original project was created, m1 mac was not supported by sail. Thus "updating" to latest sail version containing the Dockerfiles located at /vendor/sail/runtime/8.x solved this issue.
The script is written different and works without issues.
Take it as hint, that you just can't delete vendor and reinstall laravel with latest to solve this, as it caches project specific dependencies.
TL;DR
I appended latest Dockerfile Script into my project and it worked out!
FROM ubuntu:21.10
LABEL maintainer="Taylor Otwell"
ARG WWWGROUP
ARG NODE_VERSION=16
WORKDIR /var/www/html
ENV DEBIAN_FRONTEND noninteractive
ENV TZ=UTC
RUN ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone
RUN apt-get update \
&& apt-get install -y gnupg gosu curl ca-certificates zip unzip git supervisor sqlite3 libcap2-bin libpng-dev python2 \
&& mkdir -p ~/.gnupg \
&& chmod 600 ~/.gnupg \
&& echo "disable-ipv6" >> ~/.gnupg/dirmngr.conf \
&& apt-key adv --homedir ~/.gnupg --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys E5267A6C \
&& apt-key adv --homedir ~/.gnupg --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys C300EE8C \
&& echo "deb http://ppa.launchpad.net/ondrej/php/ubuntu impish main" > /etc/apt/sources.list.d/ppa_ondrej_php.list \
&& apt-get update \
&& apt-get install -y php8.0-cli php8.0-dev \
php8.0-pgsql php8.0-sqlite3 php8.0-gd \
php8.0-curl php8.0-memcached \
php8.0-imap php8.0-mysql php8.0-mbstring \
php8.0-xml php8.0-zip php8.0-bcmath php8.0-soap \
php8.0-intl php8.0-readline php8.0-pcov \
php8.0-msgpack php8.0-igbinary php8.0-ldap \
php8.0-redis php8.0-swoole php8.0-xdebug \
&& php -r "readfile('https://getcomposer.org/installer');" | php -- --install-dir=/usr/bin/ --filename=composer \
&& curl -sL https://deb.nodesource.com/setup_$NODE_VERSION.x | bash - \
&& apt-get install -y nodejs \
&& npm install -g npm \
&& curl -sS https://dl.yarnpkg.com/debian/pubkey.gpg | apt-key add - \
&& echo "deb https://dl.yarnpkg.com/debian/ stable main" > /etc/apt/sources.list.d/yarn.list \
&& apt-get update \
&& apt-get install -y yarn \
&& apt-get install -y mysql-client \
&& apt-get install -y postgresql-client \
&& apt-get -y autoremove \
&& apt-get clean \
&& rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
RUN update-alternatives --set php /usr/bin/php8.0
RUN setcap "cap_net_bind_service=+ep" /usr/bin/php8.0
RUN groupadd --force -g $WWWGROUP sail
RUN useradd -ms /bin/bash --no-user-group -g $WWWGROUP -u 1337 sail
COPY start-container /usr/local/bin/start-container
COPY supervisord.conf /etc/supervisor/conf.d/supervisord.conf
COPY php.ini /etc/php/8.0/cli/conf.d/99-sail.ini
RUN chmod +x /usr/local/bin/start-container
EXPOSE 8000
ENTRYPOINT ["start-container"]
I am trying to build a dockerized laravel project following the documentation at https://laravel.com/docs/8.x/installation#getting-started-on-linux
I ran the following:
curl -s https://laravel.build/laravel-app | bash ,
cd laravel-app,
./vendor/bin/sail up
After pulling tons of files, I believe it comes to bulid the Dockerfile, not sure which as there are 3 Dockerfiles in 3 different folders inside laravel-app/vendor/laravel/sail/runtimes, there are 3 folders named 7.4, 8.0, and 8.1, in which each contains a Dockerfile but pretty much the differences are so subtle. These Dockerfiles have 18 commands, so after the pulls are finished it says Step 1/18, 2/18, etc... However it always messes up in step 9, it starts saying "Get: ## http://..ubnutu.com...." where ## is from 1 till 127 and then at the line
"Get:127 http://archive.ubuntu.com/ubuntu hirsute/universe amd64 gosu amd64 1.12-1build1 [745 kB]"
it always quits and says:
E: Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/f/fontconfig/libfontconfig1_2.13.1-4.2ubuntu3_amd64.deb Connection timed out [IP: 91.189.88.142 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
My internet connection is stable but it always stops after the 127th Get line.
Also, I ran the command several times and same result happens, so I do not believe it's a connection issue.
Here's the components of the Dockerfile in folder 8.1, it is the 9th step where it is messed up (the second RUN command):
FROM ubuntu:21.04
LABEL maintainer="Taylor Otwell"
ARG WWWGROUP
ARG NODE_VERSION=16
WORKDIR /var/www/html
ENV DEBIAN_FRONTEND noninteractive
ENV TZ=UTC
RUN ln -snf /usr/share/zoneinfo/$TZ /etc/localtime && echo $TZ > /etc/timezone
RUN apt-get update \
&& apt-get install -y gnupg gosu curl ca-certificates zip unzip git supervisor sqlite3 libcap2-bin libpng-dev python2 \
&& mkdir -p ~/.gnupg \
&& chmod 600 ~/.gnupg \
&& echo "disable-ipv6" >> ~/.gnupg/dirmngr.conf \
&& apt-key adv --homedir ~/.gnupg --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys E5267A6C \
&& apt-key adv --homedir ~/.gnupg --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys C300EE8C \
&& echo "deb http://ppa.launchpad.net/ondrej/php/ubuntu hirsute main" > /etc/apt/sources.list.d/ppa_ondrej_php.list \
&& apt-get update \
&& apt-get install -y php8.1-cli php8.1-dev \
php8.1-pgsql php8.1-sqlite3 php8.1-gd \
php8.1-curl \
php8.1-imap php8.1-mysql php8.1-mbstring \
php8.1-xml php8.1-zip php8.1-bcmath php8.1-soap \
php8.1-intl php8.1-readline \
php8.1-ldap \
php8.1-msgpack php8.1-igbinary php8.1-redis php8.1-swoole \
php8.1-memcached php8.1-pcov php8.1-xdebug \
&& php -r "readfile('https://getcomposer.org/installer');" | php -- --install-dir=/usr/bin/ --filename=composer \
&& curl -sL https://deb.nodesource.com/setup_$NODE_VERSION.x | bash - \
&& apt-get install -y nodejs \
&& npm install -g npm \
&& curl -sS https://dl.yarnpkg.com/debian/pubkey.gpg | apt-key add - \
&& echo "deb https://dl.yarnpkg.com/debian/ stable main" > /etc/apt/sources.list.d/yarn.list \
&& apt-get update \
&& apt-get install -y yarn \
&& apt-get install -y mysql-client \
&& apt-get install -y postgresql-client \
&& apt-get -y autoremove \
&& apt-get clean \
&& rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
RUN setcap "cap_net_bind_service=+ep" /usr/bin/php8.1
RUN groupadd --force -g $WWWGROUP sail
RUN useradd -ms /bin/bash --no-user-group -g $WWWGROUP -u 1337 sail
COPY start-container /usr/local/bin/start-container
COPY supervisord.conf /etc/supervisor/conf.d/supervisord.conf
COPY php.ini /etc/php/8.1/cli/conf.d/99-sail.ini
RUN chmod +x /usr/local/bin/start-container
EXPOSE 8000
ENTRYPOINT ["start-container"]
Also, I tried to execute the 9th step manually, turns out that probably the problem is in the part of step 9 which says
"echo "disable-ipv6" >> ~/.gnupg/dirmngr.conf", it results in "bash: /home/${user}/.gnupg/dirmngr.conf: Permission denied", I ran it with sudo and chmod u+x but same result.
How can I config Laradock to run project with Nginx, HHVM and MongoDB?
I edit my .env file and change PHP_INTERPRETER from php-fpm to hhvm but nothing happens and the project still runs with php-fpm.
Here is part of my .env file:
...
PHP_INTERPRETER=hhvm
...
### NGINX ##############################################################################################################
NGINX_HOST_HTTP_PORT=80
NGINX_HOST_HTTPS_PORT=443
NGINX_HOST_LOG_PATH=./logs/nginx/
NGINX_SITES_PATH=./nginx/sites/
NGINX_PHP_UPSTREAM_CONTAINER=hhvm
NGINX_PHP_UPSTREAM_PORT=9000
...
edit laradock/hhvm/Dockerfile
Add user options
USER www-data
CMD ["/usr/bin/hhvm", "--user", "www-data", "-m", "server", "-c", "/etc/hhvm/server.ini"]
the whole file will like
FROM ubuntu:14.04
LABEL maintainer="Mahmoud Zalt <mahmoud#zalt.me>"
RUN apt-key adv --recv-keys --keyserver hkp://keyserver.ubuntu.com:80 0x5a16e7281be7a449
RUN apt-get update -y \
&& apt-get install -y software-properties-common wget \
&& wget -O - http://dl.hhvm.com/conf/hhvm.gpg.key | sudo apt-key add - \
&& add-apt-repository "deb http://dl.hhvm.com/ubuntu $(lsb_release -sc) main" \
&& apt-get update -y \
&& apt-get install -y hhvm \
&& apt-get clean \
&& rm -rf /var/lib/apt/lists/*
RUN mkdir -p /var/www
COPY server.ini /etc/hhvm/server.ini
RUN usermod -u 1000 www-data
WORKDIR /var/www
USER www-data
CMD ["/usr/bin/hhvm", "--user", "www-data", "-m", "server", "-c", "/etc/hhvm/server.ini"]
EXPOSE 9000
then rebuild hhvm, it works for me
I'm serving an index from /var/www/app/web-suite/, rather than /var/www/ however I can't work out how to make it default to this location when I attempt to visit the box (i.e: 192.168.33.10), my current provision script is as follows:
echo "running script in the VM"
apt-get updat
apt-get -y dist-upgrade
echo "------------------------------------------------------------"
echo "Installing LAMP stack"
echo "------------------------------------------------------------"
apt-get install apache2
echo mysql-server-5.1 mysql-server/root_password password root | debconf-set-selections
echo mysql-server-5.1 mysql-server/root_password_again password root | debconf-set-selections
apt-get install -y mysql-server
add-apt-repository ppa:ondrej/php5-5.6
apt-get update
apt-get install -y php5
apt-get install -y php5-mysql
service apache2 restart
echo "------------------------------------------------------------"
echo "Ruby Gems Installs"
echo "------------------------------------------------------------"
apt-get install -y ruby-full build-essential
gem install compass --version 0.12.6
gem install zurb-foundation
gem install rubygems-update
echo "------------------------------------------------------------"
echo "Installing Composer"
echo "------------------------------------------------------------"
curl -sS https://getcomposer.org/installer | sudo php -- --install-dir=/var/www/html
cd ../../var/www/html/
# wget https://phar.phpunit.de/phpunit.phar
# chmod +x phpunit.phar
# mv phpunit.phar /usr/local/bin/phpunit
php composer.phar global require "phpunit/phpunit=5.0.*"
php composer.phar install
echo "------------------------------------------------------------"
echo "Start up Compass Compiling"
echo "------------------------------------------------------------"
cd app/web-root/css/v1/
sudo compass init
sudo compass compile
echo "------------------------------------------------------------"
echo "Provisioning Complete"
echo "------------------------------------------------------------"
As is discussed in the comments to your question, I usually do this with a separate .conf which is then copied and enabled by the provision.
sudo cp /vagrant/<myconf>.conf /etc/apache2/sites-enabled/
And as a start for your custom .conf:
<VirtualHost *:80>
DocumentRoot /var/www/app/web-suite/
</VirtualHost>