I have windows, xampp and oracle_VM_Virtual Box. How can I install koha and where do I find this file?
As you're probably aware, since you have VirtualBox installed, you can't run Koha on Windows -- it needs a Linux platform
You should create an Ubuntu virtual machine on VirtualBox, and then I suggest you take a look at the installation instructions Koha on Ubuntu
Essentially it boils down to these command-line operations
echo deb http://debian.koha-community.org/koha stable main | sudo tee /etc/apt/sources.list.d/koha.list
wget -O- http://debian.koha-community.org/koha/gpg.asc | sudo apt-key add -
sudo apt-get install koha-common
Related
When you need to do apt upgrade but you cannot get the Ubuntu PC connected the internet, you will use following command in order to know urls of packages that the Ubuntu needs for upgrade.
sudo apt --print-uris upgrade
Then, you will download all deb files at another PC connected the internet and get the Ubuntu PC read these files via flash drive or something to upgrade with below command.
sudo dpkg -i *.deb
I'd like to know how to do same operation with yum manager in OracleLinux8. I am very beginner of radhat.
Thank you,
I need some help for setting up my linux box for scaled-yolov4.
My linux box have a gpu card, Nvidia quadro P620 2GB card. running linux mint 20.4 = ubuntu 20.4.
I have anaconda setup. But didn't help much.
This is what I did.
I installed the cuda 11.2 by using the following:
sudo mv cuda-ubuntu2004.pin /etc/apt/preferences.d/cuda-repository-pin-600
wget https://developer.download.nvidia.com/compute/cuda/11.2.1/local_installers/cuda-repo-ubuntu2004-11-2-local_11.2.1-460.32.03-1_amd64.deb
sudo dpkg -i cuda-repo-ubuntu2004-11-2-local_11.2.1-460.32.03-1_amd64.deb
sudo apt-key add /var/cuda-repo-ubuntu2004-11-2-local/7fa2af80.pub
sudo apt-get update
sudo apt-get -y install cuda
and then using conda to install the rest. In this case, the detect.py works fine, but train.py didn't work with out of memory error.
I installed the CUDA10.2, things work without GPU, so its very slow.
Can someone tell me the right way to install NVIDIA card and CUDA and setup the environment for the scaled-yolov4? Thank you very much.
I am a traditional Windows user and therefore you have to excuse me for my lack of experience with other OS. I installed Ubuntu in order to install FSL in my computer (seems the Windows installation failed so I tried this). However, the download goes right, but at the end it says "[FAILED] Unable to unpack FSL".
How can I solve it?
Thanks a lot
First of all, this is not a programming question. If it can still be moved to AskUbuntu (or SuperUser) it may be better appreciated.
In Ubuntu the easy way to install software is through the package manager. This is by far the least amount of work and installs binary packages in default locations (FSL is in the path straight away), plus it takes care of all the dependencies!
FSL is in the NeuroDebian repository, and if you add this to one of your 'software sources' then you can install it via Ubuntu's package manager, APT:
go to https://neuro.debian.net and find out how to add the right repository, e.g.
$ wget -O- http://neuro.debian.net/lists/focal.de-fzj.full | sudo tee /etc/apt/sources.list.d/neurodebian.sources.list
$ sudo apt-key adv --recv-keys --keyserver hkp://pool.sks-keyservers.net:80 0xA5D32F012649A5A9
update the list of packages APT can find:
$ sudo apt update
install the fsl packages you want, e.g.
$ sudo apt install fsl-5.0 fsl-harvard-oxford-cortical-lateralized-atlas
I try to install Metatrader 5, on Ubuntu 17.04 (64-bit).
I get stuck, and need somebody to help me to solve this problem.
I've installed wine-2.0.1, which is the latest stable version at the moment, and it's for 64-bit.
Finally, after successfully installing Metatrader 5, on launching the application appears an error window: terminal64.exe, with message:
A debugger has been found running in your system.
Please, unload it from memory and restart your programm.
On wiki.winehq.org, I've found that is needed to install 2 separate versions of wine: 32-bit and 64-bit. I try to do all like in:
https://wiki.winehq.org/Building_Biarch_Wine_On_Ubuntu
, but at the stage "Build 64-bit Wine", for: make clean, I got:
make: *** No rule to make target 'clean'. Stop.
There is a way to really install mt5 on Ubuntu 17.04 ?
Just installed it after suffering a little bit. After seeing many requests from the installer to provide a proxy!
First install the latest Wine from the instructions given in its website for Ubuntu (this is the one that will work!)
sudo dpkg --add-architecture i386
wget -nc https://dl.winehq.org/wine-builds/Release.key
sudo apt-key add Release.key sudo apt-add-repository
https://dl.winehq.org/wine-builds/ubuntu/
sudo apt-get update
Stable branch:
sudo apt-get install --install-recommends winehq-stable
Configure Wine to 32 bits (only your user)
WINEARCH=win32 WINEPREFIX=~/.wine32 wineboot
Install Metatrader 5
WINEPREFIX=~/.wine32 wine start /unix /path/to/mt5setup.exe
Happiness
Finally to run MetaTrader 5 add the following to your .bashrc our .profile. And type metatrader on your terminal.
export WINEPREFIX=~/.wine32
alias metatrader='wine start "C:\program files\metatrader 5\terminal.exe"'
Thanks to #Kaleshwar Chand
I recently installed metatrader5 on ubuntu 17.04, using the instructions found on mql5 thread
basically mt5 is 32 bit and your ubuntu is 64 bit so you need to change arch to 32 bit to install/use it properly
enter into terminal
WINEARCH=win32 WINEPREFIX=/home/user/.wine32 wineboot
replace user with your username
then install with
WINEPREFIX=/home/user/.wine32 wine start /unix /path/to/mtsetup.exe
again replace user with your username
I am running MT5 on Arch,
in my case, a 64bit wineprefix is needed for connect with other apis so...
For install and run it correctly I installed:
wine, wine-mono, wine_gecko, winetricks, playonlinux
winetircks corefonts, winetricks winhttp
libgnutls allowed to skip the required proxy error
MT5 was installed throught playonlinux on a 64bit wineprefix
Follow the steps from office winehq at https://wiki.winehq.org/
and find your OS you are using
Android (WineHQ binary packages for Android)
Ubuntu (WineHQ binary packages for Ubuntu 16.04, 18.04, 19.04, and 19.10)
Debian (WineHQ binary packages for Debian Stretch, Buster, and Bullseye)
Fedora (WineHQ binary packages for Fedora 30 and 31)
MacOS (WineHQ binary packages for macOS 10.8 through 10.14)
I am trying to upload my app on Cydia and it requires .deb package. I am unable to figure out how to make .deb packages on mac. I am using 10.6.3 when I write this command on terminal
dpkg-deb -b MyProgram
Terminal output is
-bash: dpkg-deb: command not found
I've install fink, Mac ports insert Mac DVD to find out but nothing helps.
It's available on Homebrew:
brew install dpkg
If you don't have Homebrew installed, go to brew.sh. It's a simple one-liner to install.
Homebrew is less invasive, less complicated, and more popular than Macports or similar.
I installed mac ports 1.7 through terminal as no package is available.
After that I installed Mac ports 1.9 through installer.
Then goto this path /opt/local/bin and run sudo port selfupdate
after that execute sudo port install dpkg
it will take some time and after that your dpkg is successfully configured.
Run this command sudo dpkg-deb -b MyProgram to make MyProgram.deb
Note MyProgram should contain DEBIAN folder and under that control file remove txt extention
Below is control file
Website: www.zeeshanullah.com
Maintainer: zeeshanullah <zzeeshann#gmail.com>
Name: Snapture
Package: zeeshanullah
Section: zeeshanullah
Version: 2.x.x
Architecture: iphoneos-arm
Description: GPS joke.
Sponsor: zeeshanullah.com <zeeshanullah>
dont forget to place a new line at the end of control file otherwise you will get an error.
You need Xcode installed on your system before using mac ports - you find it on the second mac DVD, I think. After that, you can install mac ports and then via the Terminal type "sudo port install dpkg", press return and enter your password. It may take some time to compile. You tried that?
Best option is to use FPM and you can create it in 50 secs:
fpm
i think these links can be useful for you:
How to make a deb on mac
Using ant to create deb