I don't know what happened, but when I start rstudio, it's only opening the concsole window. I am missing the workspace browser window an the working directory window.
Can you guys tell me how to open them? I can't find anything on the internet.
Thanks a lot!
Sometimes these windows are inadvertently minimized. There is a small gripper on the right side of the window which will restore them. This article should make it clear:
https://support.rstudio.com/hc/en-us/articles/213238798-Restoring-Missing-Help-Environment-Plot-Panes
Related
I did a bad thing and ran View(row) 8000 times using apply.
Now I have 8000 tabs in my Source pane (top left) in Rstudio.
Does anyone know how to clear them all in one fell swoop? Otherwise I'm doomed to control-W A LOT.
Things I've already tried:
Moving .RData
Moving .Rhistory
Google searching "rstudio clear source" "rstudio delete tabs" etc.
Thanks in advance!
I know that if you hit
Ctrl + Shift + W
it will close all the tabs. The same option is also under
File > Close All
So just save the tab you wanted and close all.
Adding another answer here just in case anyone needs it.
When I tried File>Close All my laptop froze because of the sheer amount of tabs I had open.
I finally found the location where Rstudio is storing the tabs to restore upon reopening.
Navigate to .rstudio-desktop/sdb/ (stored in my root). I had three folders there, which if I open and peek into one of the files sure enough I could see my View()'d objects. I moved these three folders to a temporary location (to be deleted when I am feeling brave) and recreated the empty folders. Hey presto, I can now open Rstudio with no tabs.
I need to debug some JavaScript an' I use Chrome dev tools. I'm a newby in JavaScript (just started to learn a couple of days ago), an' at work I could set breakpoints via the Resources pane. But at home for some reason I can't do this: after the click no breakpoint appeares.
I have Chrome version: 26.0.1410.64 m.
What could be the case?
clicking on the De-Obfuscate Source button (i.e. {}) solved this issue for me.
I'm a fool! haha! breakpoints are set in the Source pane )))
It's been a while, but in version 33.0.1750.146, but my problem was that I was on the Sources pane (I'd call this a tab; it's one of the items at the very top of the window), but I was on the Content scripts tab (on the left hand side). I needed to switch to the Sources tab.
To be clear, there are two sets of Sources tabs; one is within the other.
UPDATE 2016-01-07: Now I'm on 47.0.2526.106. The only thing that worked for me today was to close DevTools and re-open. It was a little finicky. It worked once, then stopped, and I had to close the DevTools and re-open again. I saw #johntrepreneur's answer about closing the browser, but unfortunately I have too many tabs open on too many workspaces, so that's too much of a pain, so I didn't try that, although I have to assume that would work.
Other solutions didn't work for me. Had to close and restart browser to be able to set breakpoints again.
This also happens when there is a JS error in your code.
Some sort of weird built in function in windows 10 i think because I did press a few buttons by accident. Some of my keys even stopped working in certain areas of visual studio. F.e the letter "c" stopped working in the find window.
Mine did this and no solution worked, i pressed alt, windows key and function key a few times and my problem went away.
Fixed as follows: For me, the issue stems from having set up Chrome to interact with operating system files. If you set this up, then the fact is evident from a green dot by the file name. At some point, I could not set a breakpoint in a recently edited file. I fixed this by disconnecting the interaction, as follows: When viewing "sources", above the code, there were some file names listed. Clicking the [x] to make the particular filename go away gave a caution message; I proceeded without saving. After that, I was able to set breakpoints for that file.
I also had this problem. However, once I closed the popup message in my browser, suddenly all my breakpoints that I set in that time appeared. Mental note: Don't set breakpoints while your app is showing a popup.
I couldn't find any direct fix for this problem.
It seems that chrome keeps settings of your site stored somewhere whatever you do to clean it. (I tried removing the folder from workspace, closing et reopening chrome etc... and nothing worked).
A workaround is to change your site's url to make chrome consider it a new site
I'm using Xcode 4.1 and it has always worked perfectly but today something wrong has happened. Instead of opening my project as it usually does it opens just code editor and nothing else. I have restarted my computer but it doesn't help. Other projects are opened normally. Can you give me a hint about what's going on and what should i do to fix it?
View --> Show Toolbar ,
View --> Show Assistant Editor ,
View --> Show Project navigator
and so on.
The solution, as others wrote before, is to reopen the missing panes and toolbar via the menu.
The cause of the problem is simple: If you open a source file in its own window (by double clicking it in the navigator or so) it just shows the editor pane. if you then close the main project window and the single source window afterwards, Xcode saves that last window state as the current view configuration in the project.
The intermediate solution is to never close the project window before closing all other source windows. But Apple should really fix this stupid bug. It has been around for too long.
Go to
View --> Show Toolbar.
I've had this before, don't know how it happened, but this fixed it.
I'm using Visual Studio 2010 and when I do a "Find in Files" the results are returned to the "Find Results 1" window which is docked below my code editor window.
Before, I would double click on one of the results in the Find Results window and the file I clicked on would open in the code editor panel.
The problem is now when I click on one of the results, it opens in the same panel as the Find Results window which happens to be much smaller than the code editor window which is annoying.
Does anyone know how to make it so that when I double click on the search results they open up in the code editor window again?
Thanks!
Click Window → Reset Window Layout
Works for VS2013 Update 4 and all newer versions, including VS2019.
I thought I had this problem but it was easily fixed by docking the Find Results window using the very bottom of the window position selectors.
The files open in the same position as the Find Results when the window is docked in the positions immediately next to the centre position.
This is also being discussed here:
VS2010 docks code windows in the wrong place
Go the same... irritating... I realized that this unwanted behavior happened only while the app was running in debug. After I stopped debugging, a new panel was created with this file open in it. If I opened new files, they would open in this new panel. If I close all files in this new panel, opening new files from the "Find In Files" open in the standard code editor window (as long as the app is not running).
I had this problem also. I experienced the problem in VS2013. I did not want to do "Window -> Reset Window Layout" because it seemed like that was going to do other stuff that I did not want it to do.
Here was my solution:
I noticed the problem in VS2013 in which I had project "A" open.
I opened another copy of VS2013 and opened project "B".
I closed the copy of VS2013 that was exhibiting the annoying behavior: project A.
I closed the copy of VS2013 that had project B open.
This saved the settings from the "good" copy.
Opened project A in VS2013 and all was well.
Obviously, the caveat is that this requires you notice the problem before you close VS2013. But if you do notice it in time, this is a pretty easy solution.
For those who do not want to dock their "Find Results", "Error List", "Output",... windows to the right, and for those the above answer which is Window->Reset Window Layout doesn't work: may be you are trying to dock wrong place! You should dock these windows to very bottom. Refer here: https://stackoverflow.com/a/2735726/6176317
For me, this was happening with a Visual Studio window containing an SQL file with the Window Split option active. If the cursor was in the top pane of the window, both Ctrl + F (Find) and Ctrl + H (Find & Replace) would cause the find control to appear in the other (main) Visual Studio window. Moving the SQL window into the main window just caused Find and Find & Replace to display the "Find in Files" dialog instead until another tab was selected.
The workaround was to place the cursor in the bottom pane which caused both Find and Find & Replace to work correctly in that pane of that window. Unfortunately as long as the Window Split is there, the bug is still there in the top pane.
i have a weird problem with Xcode. Here's a screenshot:
When i usually clicked on the file in the left column it'd open in source code editor on the right. Now it doesn't happen. Does anyone know how to get it back the way it was before? it drives me crazy
greetings
peter
What happens if you click on the Project, test, at the top, and then click in the columns on the right. Will it open the file in the editor?
Quit Xcode and relaunch it.
I see this is a little old now, but I had the same problem. The thing that I had to do was to open the "interface builder" program, wich is the editor for the file, then find and open the .xib file from that program. Next time I tried open it with Xcode it worked.
Drag a source file from the Groups and Files pane (usually on the left) over into the pane that says "No Editor". No need to reset the defaults.