I'm studying PostGreSQL, and I saw an example of unlogged table.
Is there a similar resource in Oracle?
I have a little extractor in Oracle, that diary fills a table then makes a text file. After that, this table is cleaned, but not dropped.
I understand that this "temporary table" could be unlogged, because it is not a business table at all.
Oracle tables can be created as NOLOGGING. This is similar to the PostgreSQL UNLOGGED option but I'm sure there are many implementation differences.
Even if the table is created as NOLOGGING only specific operations will use a direct-path insert (that is, an INSERT that writes directly to the datafile and does not generate much REDO or UNDO). And the DML generally must use the APPEND hint like below. You can tell if direct-path writes are used if you see LOAD AS SELECT.
SQL> create table test1(a number) nologging;
Table created.
SQL> explain plan for insert /*+ append */ into test1 select 1 from dual;
Explained.
SQL> select * from table(dbms_xplan.display);
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
----------------------------------------------------------------------------------
Plan hash value: 2781518217
----------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Cost (%CPU)| Time |
----------------------------------------------------------------------------------
| 0 | INSERT STATEMENT | | 1 | 2 (0)| 00:00:01 |
| 1 | LOAD AS SELECT | TEST1 | | | |
| 2 | OPTIMIZER STATISTICS GATHERING | | 1 | 2 (0)| 00:00:01 |
| 3 | FAST DUAL | | 1 | 2 (0)| 00:00:01 |
----------------------------------------------------------------------------------
There are many strange limitations on direct-path writes. It's common to make a minor mistake and end up with conventional inserts. In the example below, the hint does not have the correct syntax. There is no error or warning, only the explain plan shows LOAD TABLE CONVENTIONAL.
SQL> explain plan for insert /* append */ into test1 select 1 from dual;
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
--------------------------------------------------------------------------
Plan hash value: 1388734953
--------------------------------------------------------------------------
| Id | Operation | Name | Rows | Cost (%CPU)| Time |
--------------------------------------------------------------------------
| 0 | INSERT STATEMENT | | 1 | 2 (0)| 00:00:01 |
| 1 | LOAD TABLE CONVENTIONAL | TEST1 | | | |
| 2 | FAST DUAL | | 1 | 2 (0)| 00:00:01 |
--------------------------------------------------------------------------
9 rows selected.
Related
I'm using Oracle 18c but I guess my question would not be bound to the specific version.
I want to fetch rows from a table but I found a complex, ugly solution.
I would like to know if there is better, simple query that can return the same result as following.
First of all, I have a simple table like this.
Note that col is going to store large text.
CREATE TABLE simpletable
(record_id NUMBER,
col CLOB,
PRIMARY KEY (record_id));
I want to retrieve single row from the above table and whichever row is acceptable.
First query came to my mind is as following.
SELECT * FROM (SELECT * FROM simpletable) WHERE rownum <= 1;
Another is as following.
SELECT * FROM (SELECT * FROM simpletableORDER BY record_id) WHERE rownum <= 1;
Unfortunately, neither of above two does not use primary-key index and uses TABLE ACCESS FULL which can take long time when the table grows enough large.
(I'm guessing that oracle preferred the simpler plan because my table is not enough large yet to use index scan.
Oracle might choose different plan if the table grows up further.)
My final solution that uses primary-key index to narrow down the table access is following.
SELECT simpletable.* FROM
(SELECT * FROM
(SELECT record_id, ROWID as id FROM simpletable ORDER BY record_id)
WHERE rownum<=1) a
JOIN simpletable ON a.id = simpletable.ROWID;
If you have a better solution, please let me know.
It would be very appreciated.
P.S.
The first two queries produced the following plan.
------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1 | 2015 | 4 (25)| 00:00:01 |
|* 1 | COUNT STOPKEY | | | | | |
| 2 | VIEW | | 1 | 2015 | 4 (25)| 00:00:01 |
|* 3 | SORT ORDER BY STOPKEY| | 1 | 2015 | 4 (25)| 00:00:01 |
| 4 | TABLE ACCESS FULL | SIMPLETABLE | 1 | 2015 | 3 (0)| 00:00:01 |
------------------------------------------------------------------------------------------
the final one is:
----------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
----------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1 | 2039 | 3 (0)| 00:00:01 |
| 1 | NESTED LOOPS | | 1 | 2039 | 3 (0)| 00:00:01 |
| 2 | VIEW | | 1 | 25 | 2 (0)| 00:00:01 |
|* 3 | COUNT STOPKEY | | | | | |
| 4 | VIEW | | 1 | 25 | 2 (0)| 00:00:01 |
| 5 | INDEX FULL SCAN | SYS_C007561 | 1 | 25 | 2 (0)| 00:00:01 |
| 6 | TABLE ACCESS BY USER ROWID| SIMPLETABLE | 1 | 2014 | 1 (0)| 00:00:01 |
----------------------------------------------------------------------------------------------
I think using OFFSET..FETCH method might helps you here -
SELECT *
FROM simpletable
ORDER BY record_id
OFFSET 0 ROWS
FETCH FIRST ROW ONLY;
If the Cost Based Optimizer code has access to reliable statistics, from its dictionary, regarding all the objects available for this query, then it will very likely produce an optimal execution plan. Of course, there are exceptions and you would argue with their support people as to whether or not choosing a suboptimal plan is a bug.
In this specific case, if you are querying a single table and the CBO could choose between a full table scan and some other scan and then chose a full table scan, then chances were good that the CBO determined that the number of blocks scanned (buffer gets) would have been smaller using a full table scan.
You can expose the truth of the matter by tracing the execution of multiple versions of the statement, each one using a different set of hints to force a particular execution plan. You should consider the execution with the fewest buffer gets to be the winner. Alternatively, if the execution plan is of a serial nature, then you can use response time as measure. If the winner is not automatically chosen by the CBO, then it's probably because the statistics it used were not accurate and you should make them accurate. If the statistics are indeed accurate then Oracle support will probably give you a very long homework assignment.
Similar to the Horror Vacui, some database developers suffer under the Horror FULL TABLE SCAN by simply assuming index access good, full scan bad.
But this is not true, FULL TABLE SCAN is a normal access method, that is preferred in some situation.
Let's illustrate it on a simple example with 10K rows in your table
insert into simpletable (record_id, col)
select rownum, rpad('x',3998,'y')
from dual connect by level <= 10000
To get one arbitrary row from the table you simple use the following query
select * from simpletable where rownum = 1;
Here is the output (edited for brevity) you get from SQL*Plus with setting set autotrace traceonly to see the execution plan and the statistics.
Execution Plan
----------------------------------------------------------
Plan hash value: 1007892724
--------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time
--------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1 | 2015 | 2 (0)| 00:00:01
|* 1 | COUNT STOPKEY | | | | |
| 2 | TABLE ACCESS FULL| SIMPLETABLE | 10188 | 19M| 2 (0)| 00:00:01
--------------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
1 - filter(ROWNUM=1)
Statistics
----------------------------------------------------------
5 consistent gets
2 physical reads
1 rows processed
The most important information is the statistics consistent gets - there were only 5 blocks accessed - the table is much larger.
What is the explanation? See the operation COUNT STOPKEY above the TABLE ACCESS FULL this ensures that the scan is terminated after the first row is found.
If you want to get a specific row, e.g. the one with the highest ID, the prefered approach is using the row_limiting_clause
SELECT *
FROM simpletable
ORDER BY record_id DESC
OFFSET 0 ROWS FETCH NEXT 1 ROW ONLY;
You will see the execution plan below, that performs first the INDEX FULL SCAN DESCENDING. The complete (full) index will be red in the descending order, but again due to STOPKEY you break after reading the highest key (which is the first entry due to the descending order).
---------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
---------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 10188 | 19M| 613 (0)| 00:00:01 |
|* 1 | VIEW | | 10188 | 19M| 613 (0)| 00:00:01 |
|* 2 | WINDOW NOSORT STOPKEY | | 10188 | 19M| 613 (0)| 00:00:01 |
| 3 | TABLE ACCESS BY INDEX ROWID| SIMPLETABLE | 10188 | 19M| 613 (0)| 00:00:01 |
| 4 | INDEX FULL SCAN DESCENDING| SYS_C008793 | 10188 | | 29 (0)| 00:00:01 |
---------------------------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
1 - filter("from$_subquery$_002"."rowlimit_$$_rownumber"<=CASE WHEN (0>=0) THEN
0 ELSE 0 END +1 AND "from$_subquery$_002"."rowlimit_$$_rownumber">0)
2 - filter(ROW_NUMBER() OVER ( ORDER BY
INTERNAL_FUNCTION("SIMPLETABLE"."RECORD_ID") DESC )<=CASE WHEN (0>=0) THEN 0 ELSE 0
END +1)
Note if the table is empty or contains very few rows, you will se even here a TABLE ACCESS FULL because the optimizer recognises that it is more effective that to first go to the index and that access the table.
I have a simple Oracle query with a plan that doesn't make sense.
SELECT
u.custid AS "custid",
l.listid AS "listid"
FROM
users u
INNER JOIN lists l ON u.custid = l.custid
And here’s what the autotrace explain tells me it has for a plan
------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1468K| 29M| | 11548 (1)| 00:00:01 |
|* 1 | HASH JOIN | | 1468K| 29M| 7104K| 11548 (1)| 00:00:01 |
| 2 | INDEX FAST FULL SCAN| USERS_PK | 404K| 2367K| | 266 (2)| 00:00:01 |
|* 3 | TABLE ACCESS FULL | LISTS | 1416K| 20M| | 9110 (1)| 00:00:01 |
------------------------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
1 - access("U"."CUSTID"="L"."CUSTID")
3 - filter(TRUNC("SORT_TYPE")>=1 AND TRUNC("SORT_TYPE")<=16)
Note
-----
- dynamic statistics used: dynamic sampling (level=2)
- this is an adaptive plan
- 1 Sql Plan Directive used for this statement
What concerns me is predicate 3. sort_type does not appear in the query, and is not indexed at all. It seems to me that sort_type should not be involved in this query at all.
There is a constraint on lists.sort_type: (Yes, I know we could have sort_type be an INTEGER not a NUMBER)
sort_type NUMBER DEFAULT 2 NOT NULL,
CONSTRAINT lists_sort_type CHECK ( sort_type BETWEEN 1 AND 16 AND TRUNC(sort_type) = sort_type )
It looks to me that that filter is on sort_type is basically a tautology. Every row in lists must pass that filter because of that constraint.
If I drop the constraint, the filter no longer shows up in the plan, and the estimated cost goes down a little bit. If I add the constraint back, the plan uses the filter again. There's no significant difference in execution speed one way or the other.
I'm concerned because I discovered this filter in a much larger, more complex query that I was trying to optimize down from a couple of minutes of runtime.
Why is Oracle adding that filter, and is it a problem and/or pointing to another problem?
EDIT: If I change the constraint on sort_type to not have the TRUNC part, the filter disappears. If I split the constraint into two different constraints, the filter comes back.
Generally speaking, Oracle generates predicates based on your CHECK constraints whenever doing so will give the optimizer more information to generate a good plan. It is not always smart enough to recognize when those are redundant. Here is a short example in Oracle 12c using your table names:
-- Create the CUSTS table
CREATE TABLE custs ( custid number not null );
CREATE INDEX custs_u1 on custs (custid);
-- Create the LISTS table
CREATE TABLE lists
( listid number not null,
sort_type number not null,
custid number,
constraint lists_c1 check ( sort_type between 1 and 16 and
trunc(sort_type) = sort_Type )
);
-- Explain a join
EXPLAIN PLAN FOR
SELECT /*+ USE_HASH(u) */
u.custid AS "custid",
l.listid AS "listid"
FROM custs u
INNER JOIN lists l ON u.custid = l.custid;
-- Show the plan
select * from table(dbms_xplan.display);
Plan hash value: 2443150416
-------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
-------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1 | 39 | 3 (0)| 00:00:01 |
|* 1 | HASH JOIN | | 1 | 39 | 3 (0)| 00:00:01 |
| 2 | INDEX FULL SCAN | CUSTS_U1 | 1 | 13 | 1 (0)| 00:00:01 |
| 3 | TABLE ACCESS FULL| LISTS | 1 | 26 | 2 (0)| 00:00:01 |
-------------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
1 - access("U"."CUSTID"="L"."CUSTID")
Note
-----
- dynamic statistics used: dynamic sampling (level=2)
So far, nothing weird. No questionable predicates added.
Now, let's tell the Oracle optimizer that the distribution of data on TRUNC(sort_type) might matter...
declare
x varchar2(30);
begin
x := dbms_stats.create_extended_stats ( user, 'LISTS', '(TRUNC(SORT_TYPE))');
dbms_output.put_line('Extension name = ' || x);
end;
... and, now, let's explain that same query again...
-- Re-explain the same join as before
EXPLAIN PLAN FOR
SELECT /*+ USE_HASH(u) */
u.custid AS "custid",
l.listid AS "listid"
FROM custs u
INNER JOIN lists l ON u.custid = l.custid;
-- Show the new plan
select * from table(dbms_xplan.display);
Plan hash value: 2443150416
-------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
-------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1 | 52 | 3 (0)| 00:00:01 |
|* 1 | HASH JOIN | | 1 | 52 | 3 (0)| 00:00:01 |
| 2 | INDEX FULL SCAN | CUSTS_U1 | 1 | 13 | 1 (0)| 00:00:01 |
|* 3 | TABLE ACCESS FULL| LISTS | 1 | 39 | 2 (0)| 00:00:01 |
-------------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
1 - access("U"."CUSTID"="L"."CUSTID")
3 - filter(TRUNC("SORT_TYPE")>=1 AND TRUNC("SORT_TYPE")<=16)
Note
-----
- dynamic statistics used: dynamic sampling (level=2)
Now, Oracle has added the predicate, because the CBO might benefit from it. Does it really benefit from it? No, but Oracle is only smart enough to know that it might and that it doesn't(*) hurt anything.
(*) there have been numerous bugs in previous versions where this _has_ hurt things by messing up the selectivity estimated by the CBO.
The presence of extended statistics is only one example reason of why Oracle might think it could benefit from this predicate. To find out if that is the reason in your case, you can look for extended statistics in your database like this:
SELECT * FROM dba_stat_extensions where table_name = 'LISTS';
Keep in mind, the Oracle CBO can create stat extensions on its own. So there could be extended stats that you didn't realize were there.
I have a table foo which was created like this.
CREATE TABLE foo AS SELECT * FROM all_objects;
CREATE INDEX foo_I1 ON foo(owner,object_type,status);
exec dbms_stats.gather_table_stats('hr','foo',method_opt=>'FOR ALL COLUMNS size AUTO');
I created an index on 3 columns and firing a query which looks like below.
select * from foo where status='INVALID';
select * from foo where status='VALID';
status='VALID' fetches near about 71000 rows in a table of 71780 rows. it does a full table scan. it's understandable. but in case of status='INVALID' which fetches only 3 rows , it's doing full table scan. It's also getting A rows and E rows very different.
PLAN: same for both queries.
SQL_ID gdhy9j91gu9sm, child number 0
select /*+gather_plan_statistics */ * from foo where status='VALID'
Plan hash value: 1245013993
------------------------------------------------------------------------------------
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers |
------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1 | | 50 |00:00:00.01 | 4 |
|* 1 | TABLE ACCESS FULL| FOO | 1 | 71773 | 50 |00:00:00.01 | 4 |
------------------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
1 - filter("STATUS"='VALID')
Please explan this behaviour. Database Version: 11.2g oracle.
A missing histogram is probably causing the full table scan. Histograms are usually only created if the data is skewed and if the column has been used in a relevant predicate.
Sometimes you need to run a query before gathering statistics, to let Oracle know that this column is important enough to deserve a histogram.
select * from foo where status='INVALID';
exec dbms_stats.gather_table_stats('hr','foo',method_opt=>'FOR ALL COLUMNS size AUTO');
Re-run the SELECT and now it can use the histogram. With the histogram Oracle knows that INVALID returns a small number of rows, and an index would be useful:
explain plan for select * from foo where status='INVALID';
select * from table(dbms_xplan.display);
Plan hash value: 1520589999
---------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
---------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1 | 134 | 217 (0)| 00:00:01|
| 1 | TABLE ACCESS BY INDEX ROWID BATCHED| FOO | 1 | 134 | 217 (0)| 00:00:01|
|* 2 | INDEX SKIP SCAN | FOO_I1 | 1 | | 216 (0)| 00:00:01|
---------------------------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
2 - access("STATUS"='INVALID')
filter("STATUS"='INVALID')
I have a stored procedure with multiple mandatory parameters and a SELECT statement inside it which has multiple conditions in its WHERE clause, like below:
SELECT *
FROM TABLE
WHERE column_1 = param_1
AND column_2 = param_2
AND column_3 = param_3;
This query works fine and it uses the indexes on the table correctly. But a change in requirements implied adjusting the procedure so that you can pass it less parameters, so maybe just the first two, but we want the procedure to work with minimal changes to the stored procedure.
One of the suggestions I've made was to use a DECODE function to treat each possibly NULL parameter, like this:
SELECT *
FROM TABLE
WHERE column_1 = param_1
AND column_2 = param_2
AND column_3 = DECODE(param_3, null, column_3);
And this way, I considered that because the function is not applied on the table column, the index will still be used. I have made some tests and the query still works and uses the indexes even in this situation.
But I'm still getting contradicted by our architect (with no other explanations), that the query will not use the index because I'm using a function in the WHERE clause.
I'm not sure if my change is enough proof that it will always use the index, or if there are other situations which I should check and in which the index might not be used because of the DECODE function.
Any help / suggestions / information will be very much appreciated.
You are right. Test it and prove it.
Setup
SQL> CREATE TABLE t AS SELECT LEVEL id FROM dual CONNECT BY LEVEL <=10;
Table created.
SQL>
SQL> CREATE INDEX id_indx ON t(ID);
Index created.
Test case
Normal query, without any function:
SQL> set autot on explain
SQL>
SQL> SELECT * FROM t WHERE ID = 5;
ID
----------
5
Execution Plan
----------------------------------------------------------
Plan hash value: 1629656632
----------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
----------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1 | 3 | 1 (0)| 00:00:01 |
|* 1 | INDEX RANGE SCAN| ID_INDX | 1 | 3 | 1 (0)| 00:00:01 |
----------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
1 - access("ID"=5)
Using DECODE on the value(not on column):
SQL> SELECT * FROM t WHERE ID = decode(5, NULL, 3, 5);
ID
----------
5
Execution Plan
----------------------------------------------------------
Plan hash value: 1629656632
----------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
----------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1 | 3 | 1 (0)| 00:00:01 |
|* 1 | INDEX RANGE SCAN| ID_INDX | 1 | 3 | 1 (0)| 00:00:01 |
----------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
1 - access("ID"=5)
Using NVL on the value(not on column):
SQL> SELECT * FROM t WHERE ID = nvl(5, 3);
ID
----------
5
Execution Plan
----------------------------------------------------------
Plan hash value: 1629656632
----------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
----------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1 | 3 | 1 (0)| 00:00:01 |
|* 1 | INDEX RANGE SCAN| ID_INDX | 1 | 3 | 1 (0)| 00:00:01 |
----------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
1 - access("ID"=5)
Above all the three cases, index is used.
DECODE on the column:
SQL> SELECT * FROM t WHERE decode(ID, NULL, 3, 5) = 5;
ID
----------
1
2
3
4
5
6
7
8
9
10
10 rows selected.
Execution Plan
----------------------------------------------------------
Plan hash value: 1601196873
--------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
--------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1 | 3 | 3 (0)| 00:00:01 |
|* 1 | TABLE ACCESS FULL| T | 1 | 3 | 3 (0)| 00:00:01 |
--------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
1 - filter(DECODE(TO_CHAR("ID"),NULL,3,5)=5)
NVL on the column:
SQL> SELECT * FROM t WHERE nvl(ID, 3) = 3;
ID
----------
3
Execution Plan
----------------------------------------------------------
Plan hash value: 1601196873
--------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
--------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1 | 3 | 3 (0)| 00:00:01 |
|* 1 | TABLE ACCESS FULL| T | 1 | 3 | 3 (0)| 00:00:01 |
--------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
1 - filter(NVL("ID",3)=3)
SQL>
As expected, index is not used as you are applying a function on the column having a regular index. You need a function-based index.
So, you are right, you don't have to worry about index usage when you are not applying the function on the column, but on the parameter value.
There is example of using a function-based indexes in the documentation Concepts Oracle 11G:
A function-based index is also useful for indexing only specific rows
in a table. For example, the cust_valid column in the sh.customers
table has either I or A as a value. To index only the A rows, you
could write a function that returns a null value for any rows other
than the A rows.
I can imagine only this use case: the reducing size of index, by eliminating some rows by condition. Is there other use cases when this possibility is useful?
Let's take a look at function-based indexes:
SQL> create table tab1 as select object_name from all_objects;
Table created.
SQL> exec dbms_stats.gather_table_stats(user, 'TAB1');
PL/SQL procedure successfully completed.
SQL> set autotrace traceonly
SQL> select count(*) from tab1 where lower(object_name) = 'all_tables';
Execution Plan
----------------------------------------------------------
Plan hash value: 1117438016
---------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
---------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1 | 19 | 18 (0)| 00:00:01 |
| 1 | SORT AGGREGATE | | 1 | 19 | | |
|* 2 | TABLE ACCESS FULL| TAB1 | 181 | 3439 | 18 (0)| 00:00:01 |
---------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
2 - filter(LOWER("OBJECT_NAME")='all_tables')
Statistics
----------------------------------------------------------
1 recursive calls
0 db block gets
63 consistent gets
...
As you know, all the objects have unique names, but oracle has to analyze all 181 rows and performs 63 consistent gets (physical or logical block reads)
Let's create a function-based index:
SQL> create index tab1_obj_name_idx on tab1(lower(object_name));
Index created.
SQL> select count(*) from tab1 where lower(object_name) = 'all_tables';
Execution Plan
----------------------------------------------------------
Plan hash value: 707634933
---------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
---------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | 1 | 17 | 1 (0)| 00:00:01 |
| 1 | SORT AGGREGATE | | 1 | 17 | | |
|* 2 | INDEX RANGE SCAN| TAB1_OBJ_NAME_IDX | 181 | 3077 | 1 (0)| 00:00:01 |
---------------------------------------------------------------------------------------
Predicate Information (identified by operation id):
---------------------------------------------------
2 - access(LOWER("OBJECT_NAME")='all_tables')
Statistics
----------------------------------------------------------
1 recursive calls
0 db block gets
2 consistent gets
...
As you can see the cost cuts down (from 18 to 1) dramatically and there are only 2 consistent gets.
So function-based indexes can increase the performance of your application very well.