I have a procedure that has DML commands. the procedure accepts a variable of type out, and it returns a value.
i need call this procedure from a function.
the goal is that the function will return the value of the variable out returns the procedure.
(i need it for SSIS, but I believe that it is useful in other cases.)
During attempts, I got these errors:
ORA-14551: cannot perform a DML operation inside a query tips.
ORA-06519: active autonomous transaction detected and rolled back.
I'm looking for the right syntax to do it.
Example of a solution that works:
The procedure:
create or replace procedure MyProc(outRes OUT NUMBER)
is
begin
update some_table set some_description = 'abc';
commit;
if (some_condition) then
outRes := 666;
else
outRes := 999;
end if;
end MyProc;
Note: You must do commit; at the end of the DML command.
The function:
CREATE or replace FUNCTION MyFunc
RETURN int IS
PRAGMA AUTONOMOUS_TRANSACTION;
myVar number;
begin
MyProc(myVar);
return myVar;
END MyFunc;
Note that at the beginning of the function has: PRAGMA AUTONOMOUS_TRANSACTION;
And this function call:
select MyFunc() as res from dual;
Here is an example of what you need to do. Do know this is UNTESTED, but should give you a general idea of which way to go. This is known as Dynamic SQL and uses bind variables. There's a lot more I don't know such as the data type your procedure spits out and what not... so if it's not varchar2 then change it accordingly...
FUNCTION myFunc(procedure_call varchar2) RETURN VARCHAR2
IS
v_out1 varchar2(500);
BEGIN
EXECUTE IMMEDIATE 'begin '||procedure_call||'( :out1 ); end;' using v_out1;
RETURN v_out;
END;
Related
i am trying to call a function from stored procedure in Oracle, but not getting any idea how to do.
my function has two IN parameter and one OUT parameter.
in my procedure i am using out sys refcursor . Any refrence or example will help me a lot.
Here is a simple example for calling function inside procedure. Also as mentioned by APC using OUT in function is a bad practice. Instead you can return your required output. And I'm not sure how you are using sys_refcursor, so modify your procedure accordingly
CREATE OR REPLACE FUNCTION SUM_OF_2(NUM1 IN NUMBER,NUM2 IN NUMBER) RETURN NUMBER
IS
RESULT_SUM NUMBER;
BEGIN
RESULT_SUM:=NUM1+NUM2;
RETURN RESULT_SUM;
END;
CREATE OR REPLACE PROCEDURE CALL_FUNCTON(NUM1 NUMBER,NUM2 NUMBER)
AS
V_FINAL_RESULT NUMBER;
BEGIN
V_FINAL_RESULT:=SUM_OF_2(NUM1,NUM2);
DBMS_OUTPUT.PUT_LINE(V_FINAL_RESULT);
END;
BEGIN
CALL_FUNCTON(5,10);
END;
/
CHECK DEMO HERE
Not sure on what your requirement is , maybe you are just trying the code for education purposes. Generally I have not seen much code which uses OUT parameter with functions, in case you want to return multiple values to the caller object then you could use a procedure with more then one OUT variables. There are some limitation on how an oracle function with OUT parameter would differ from a normal function.
CREATE OR REPLACE FUNCTION temp_demo_func(out_var1 OUT NUMBER)
RETURN VARCHAR2 IS
BEGIN
out_var1 := 1;
RETURN 'T';
EXCEPTION
WHEN OTHERS THEN
RETURN 'F';
END temp_demo_func;
/
CREATE OR REPLACE PROCEDURE temp_demo_proc
(
in_var1 NUMBER
,cur_refcur_out OUT SYS_REFCURSOR
) IS
res VARCHAR2(1);
out_var1 NUMBER;
BEGIN
res := temp_demo_func(out_var1 => out_var1);
dbms_output.put_line(out_var1);
OPEN cur_refcur_out FOR
SELECT in_var1
,out_var1
,res
FROM dual;
END;
/
set serveroutput on
declare
cur_refcur_out Sys_Refcursor;
in_var1 number := 22;
begin
temp_demo_proc(in_var1 => in_var1
,cur_refcur_out => cur_refcur_out);
end;
/
Can you call a PL/SQL procedure from inside a function?
I haven't come across with the practical example.So if anyone has come across with this please share.
Yes. You can call any pl/sql program from inside any other pl/sql program. A function can call a function, a procedure can call a procedure which calls a function, a function can invoke a TYPE BODY...do an INSERT..which causes a TRIGGER to fire.
A simple (not really practical) example.
Using the HR schema where you have an EMPLOYEES table which includes columns EMPLOYEE_ID, FIRST_NAME, and LAST_NAME.
I have a function that takes in an INTEGER which we use to look up an EMPLOYEE record. We take their first and last names, and concat them together, and return the value back in UPPERCASE text.
Before we do that however, we call a procedure which does nothing but take a 5 second nap using the DBMS_LOCK package.
The code:
create or replace procedure do_nothing_comments (x in integer, y in integer)
is
begin
null;
-- yeah, this is a dumb demo
dbms_lock.sleep(5);
end;
/
create or replace FUNCTION upper_name (
x IN INTEGER
) RETURN VARCHAR2 IS
upper_first_and_last VARCHAR2 (256);
BEGIN
SELECT upper (first_name)
|| ' '
|| upper (last_name)
INTO upper_first_and_last
FROM employees
WHERE employee_id = x;
do_nothing_comments (1, 2); -- here we are calling the procedure
RETURN upper_first_and_last;
END;
/
Now let's invoke the function.
DECLARE
X NUMBER;
v_Return VARCHAR2(200);
BEGIN
X := 101;
v_Return := UPPER_NAME(
X => X
);
:v_Return := v_Return;
END;
/
I'm going to do this in SQL Developer using the Execute feature with the function open:
I get the answer back...it just takes 5 seconds longer than it really needed to.
Here you go:
create or replace function demo
return varchar2
as
begin
dbms_output.put_line('Hello');
return 1;
end demo;
I've been given the task of converting a stored procedure, with several CRUD operations, to a package with functions defined.
When I created the package in Oracle SQL Developer, I defined may functions:
FUNCTION func1 RETURN NUMBER;
FUNCTION func2 RETURN NUMBER;
etc...
I have corresponding code in the 'package body':
FUNCTION func1 RETURN NUMBER
IS
BEGIN
-- some CRUD operation
END;
RETURN 0;
COMMIT;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('FUNCTION func1: error ' || ERR_NUM || ', Msg:' || ERR_MSG);
ROLLBACK;
END func1;
When I run them, I can choose which function to run from the list supplied. My question is what do I need to write or do to have all functions run in sequence with one command?
thanks
If you need to run some procedures in a given order, you need to build a procedure or an anonymous block that calls the procedures in the right order.
For example:
create or replace package aPackage is
procedure runAll;
end;
create or replace package body aPackage is
procedure proc1 is
begin
dbms_output.put_line('Procedure 1');
end proc1;
--
procedure proc2 is
begin
dbms_output.put_line('Procedure 2');
end proc2;
procedure runAll is
begin
proc1;
--
proc2;
--
end runAll;
end;
The call:
SQL> exec aPackage.runAll;
Procedure 1
Procedure 2
PL/SQL procedure successfully completed.
SQL>
I used procedures just to call them without need to assign the result to a variable, but the idea is the same for functions.
With functions:
create or replace package aPackageFun is
function runAll return number;
end;
create or replace package body aPackageFun is
function fun1 return number is
begin
dbms_output.put_line('Inside function 1');
return 1;
end fun1;
--
function fun2 return number is
begin
dbms_output.put_line('Inside function 2');
return 2;
end fun2;
function runAll return number is
vNum1 number;
vNum2 number;
begin
vNum1 := fun1();
--
vNum2 := fun2();
--
return vNum1 + vNum2;
end runAll;
end;
The call:
SQL> select aPackageFun.runAll() from dual;
APACKAGEFUN.RUNALL()
--------------------
3
Inside function 1
Inside function 2
SQL>
About your code, notice that you have a commit after a return: the commit will never be executed.
I am new to PL/SQL. I have created a pipelined function inside a package which takes as its parameter input an array of numbers (nested table).
But I am having trouble trying to run it via an sql query. Please see below
my input array
CREATE OR REPLACE TYPE num_array is TABLE of number;
my function declaration
CREATE OR REPLACE PACKAGE "my_pack" as
TYPE myRecord is RECORD(column_a NUMBER);
TYPE myTable IS TABLE of myRecord;
FUNCTION My_Function(inp_param num_array) return myTable PIPELINED;
end my_pack;
my function definition
CREATE OR REPLACE PACKAGE BODY "my_pack" as
FUNCTION My_Function(inp_param num_array) return myTable PIPELINED as
rec myRecord;
BEGIN
FOR i in 1..inp_param.count LOOP
FOR e IN
(
SELECT column_a FROM table_a where id=inp_param(i)
)
LOOP
rec.column_a := e.column_a;
PIPE ROW (rec);
END LOOP;
END LOOP;
RETURN;
END;
end my_pack;
Here is the latest code I've tried running from toad. But it doesn't work
declare
myarray num_array;
qrySQL varchar2(4000);
begin
myarray := num_array(6341,6468);
qrySQL := 'select * from TABLE(my_pack.My_Function(:myarray))';
execute immediate qrySQL;
end;
So my question is how can I feed an array into this pipelined function from either TOAD or SQL Developer. An example would be really handy.
Thanks
The error is fairly clear, you have a bind variable that you haven't assigned anything to. You need to pass your actual array with:
qrySQL := 'select * from TABLE(my_pack.My_Function(:myarray))';
execute immediate qrySQL using myarray;
It's maybe more useful, if you want to call it from PL/SQL, to use static SQL as a cursor:
set serveroutput on
declare
myarray num_array;
begin
myarray := num_array(6341,6468);
for r in (select * from TABLE(my_pack.My_Function(myarray))) loop
dbms_output.put_line(r.column_a);
end loop;
end;
/
Or just query it statically as a test, for fixed values:
select * from TABLE(my_pack.My_Function(num_array(6341,6468)));
SQL Fiddle with some minor tweaks to the function to remove errors I think came from editing to post.
for example I have created a table with table name 'aaa' with four columns act_num, clear_balance, available_balance, total_balance and I have inserted some values.
The function
deb_amount withdraws money from a bank account. It accepts an account
number and an amount of money as parameters. It uses the account number to
retrieve the account balance from the database, then computes the new balance. If this
new balance is less than zero then the function jumps to an error routine; otherwise,
it updates the bank account.
create or replace function deb_amount(p_act_num VARCHAR2, p_amount number )
return number as
declare
v_old_amount number;
v_new_amount number;
e_over_drawn exception;
begin
select clear_balance into v_old_amount from aaa where act_num=p_act_num;
v_new_amount:=v_old_amount-p_amount;
if v_old_amount<p_amount then
raise e_over_drawn;
else
update aaa set clear_balance=v_new_amount,available_balance=v_new_amount,total_balance=v_new_amount where act_num=p_act_num;
end if;
commit;
return clear_balance;
exception
when e_over_drawn then
rollback;
end;
it will compile, but with warnings.
If I want to execute the 'select * from deb_amount(1,100)' it show error.
sql command not ended properly.
Thank you.
You need to call function using dual. Ex:
select deb_amount(1,100) from dual;
or using a variable in plsql block
declare
l_return number;
begin
l_return:=deb_amount(1,100);
end;
It looks like you might be running several commands as a scipt, but haven't ended the function properly. The / after the function creation has to be on a line on its own, and at the start of the line:
create or replace function deb_amount(p_act_num VARCHAR2,
p_amount number)
return number as
declare
v_old_amount number;
v_new_amount number;
e_over_drawn exception;
begin
select clear_balance into v_old_amount
from aaa where act_num=p_act_num;
v_new_amount:=v_old_amount-p_amount;
if v_old_amount<p_amount then
raise e_over_drawn;
else
update aaa set clear_balance=v_new_amount,
available_balance=v_new_amount,
total_balance=v_new_amount
where act_num=p_act_num;
end if;
commit;
return clear_balance;
exception
when e_over_drawn then
rollback;
end;
/
show errors
select deb_account('1', 1) from dual;
The show errors will tell what actual compilation errors you got. It looks like it will complain about the return as you don't have a local clear_balance variable, but you can use v_new_amount instead here. You need to return something after the rollback too, or raise an exception which might be more useful.
As Manjunatha said, your query then needs to call the function properly, with the from clause referencing a table, rather than the function itself.
You have a bigger problem with the concept though; you can't call a function that does DML (insert, update, delete) from SQL, only from a PL/SQL block. Generally DML should be done from a procedure rather than a function, if it has to be done in PL/SQL at all.