I am currently trying to integrate typescript into vs 2010 by following these instructions for windows 7 described here.
Please do not mark this as duplicate because I am having a problem with the provided solution to my question and cannot comment on the solution.
I followed your instructions closely but sadly it's not working for me. During installation of typescript I get an warning from VisualStudio concerning devenv.exe: Invalid Command Line. Unknown Switch : updateConfiguration.
After clicking okay the installer reports that the installation was successful. when I start VS without creating or opening a project, after a while I am greeted with another error:
Confirming, that I do not want to get bugged about this again i create a new typescript(!) project, which gets denied with a more severe notification:
I checked all the folder paths I added as parameters to the .msi file and it looks like everything is in place. Any ideas how to resolve this?
Thanks!
I suppose there is a missing folder redirection in the answer you referenced, the VSTools msbuild folder is not being redirected.
If you open up the %programfiles%\msbuild\Microsoft\VisualStudio\v11.0\Typescript folder, is the target file present there? Try copying the whole folder to %programfiles%\msbuild\Microsoft\VisualStudio\v10.0\Typescript.
On a more serious note, Typescript is usually used for Web Development, Web development project types are almost 100% backwards compatible between VS2012, VS2013 and VS2010, so why not upgrade to make use of these features.
It can hardly be a support issue, since backhacking Typescript into VS2010 is surely putting you in the unsupported bucket.
I was getting the below message from Visual Studio 2010.
"This project is incompatible with the current version of Visual Studio"
One situation resulting in this error has already been posted here at Stackoverflow, but that question has been closed. I'm thinking it's a fairly generic problem. Since I have found a "solution", I'll post this question, and my solution as an answer.
If the message
This project is incompatible with the current version of Visual Studio
is due to an attempt to open a project targeting .Net 4.5, then the "solution" or workaround is to edit the .csproj file and change the TargetFrameworkVersion from "v4.5" to "v4.0". That at least allows the project to be loaded, although it may result in compiler errors if the program is dependent on 4.5 features.
VS 2012 has different project type support based on what you install at setup time and which edition you have. Certain options are available, e.g. web development tools, database development tools, etc. So if you're trying to open a web project but the web development tools weren't installed, it complains with this message.
This can happen if you create the project on another machine and try to open it on a new one. I figured it out trying to open an MVC project after I accidentally uninstalled the web tools.
I just got the same error message with a couple projects after installing Visual Studio 2015 Update 3. For me, the solution was to install .NET Core
In my case it was an incompatible Project Type. Editing project file and removing ProjectTypeGuids node resolved the issue of loading the project (I had already re-targeted the framework version as advised here).
Probably the project type is not supported in the (most likely) NEW version of VS, so you will have to adjust (update) the code to work properly (if possible), but at least you can see the content through VS.
I Resolved the issue by deleting the files in the below folder
%localappdata%\Microsoft\VisualStudio\12.0\ComponentModelCache
Source: https://forums.xamarin.com/discussion/70388/how-to-fix-incompatible-issue-after-visual-studio-2015-update-3
As for me, I realized there was another web project in the solution that my VS2017 was loading fine, so I copied over the ProjectTypeGuids element of it over to the project that wasn't loading. Its diff was:
- <ProjectTypeGuids>{E3E379DF-F4C6-4180-9B81-6769533ABE47};{349c5851-65df-11da-9384-00065b846f21};{fae04ec0-301f-11d3-bf4b-00c04f79efbc}</ProjectTypeGuids>
+ <ProjectTypeGuids>{349c5851-65df-11da-9384-00065b846f21};{fae04ec0-301f-11d3-bf4b-00c04f79efbc}</ProjectTypeGuids>
After this, it loads. Don't ask me why.
If you are getting the same error for a project which is actually an extension (.vsix), installing Microsoft Visual Studio 2012 SDK does the trick.
Go to tools -> Extensions and updates -> Online -> Search for project installer -> download
And relaunch Visual studio.
After installing Update 3 for Visual Studio 2015, I suddenly got the "This project is incompatible with the current version of Visual Studio" error message while opening my Cordova project (.jsproj Javascript project file)
To solve this:
Go to Programs & Features
Select the Microsoft Visual Studio 2015 installation and click Change
Click Modify
Install "HTML/Javascript (Apache Cordova) Update 10" of the Cross Platform Mobile Development section
For me, I got this same error in VS 2015 and just installed the VS 2015 update 1, though from another answer, VS is actually up to Update 3, now (after which, they got the error and had to install .NET Core). Had issues when it hit certain packages, like the Windows SDK ones, and had to point the installer back at the paths in my original CD, and for some, even that didn't work and had to skip them and re-download from an internet-connected computer, transfer them over, and run them later manually (computer was not connected to the internet to be able to download updated versions of the packages), but after doing all that and doing a reboot, the error was gone and my project loaded fine.
I had this issue and after hours of uninstalling and reinstalling I found out the issue in my instance.
The reason why I got this was down to the fact that I didn't have the correct extension.
In my case the ASP.net project (my startup) was the incompatible project and this was because I didn't have the following:
Microsoft ASP.NET and Web Tools
Micrsoft ASP.NET Web Frameworks and Tools
It was a simple case of going into extensions and updates under the Tools menu
I had this error and found it was due to the presence an 'Import' XML tag inside the .csproj.user file. Once I removed it, Visual Studio could open the project again.
What most people forget it is that the files of visual studio are just text files, that have some peculiars configurations that will show to the program how to open it. that is, we can change this because it's just a text in some file in there in your project folders.
Well, knowing this, what we have to do is very simple!
The first step is knowing what kind of project it is this project that stay unload. (for example: Class Library)
The Second step is create a new one (Class Library) because you know that your visual studio will create a version supported by himself. Unload this one and click in "Edit csproj".
It's in this file that we can found the configuration that tell to VS how this proj will be loaded and his name is ProjectGuid, this serial number has a variation according the type and version of project.
Now, look at your "ok project", copy the "ProjectGuid" TAG, paste on csproj that unloaded, and pay attention to the little differences and make this files almost equals, except for the tags ItemGroup that represent the references of the project.
Doing that, save all files and close your VS and open again, now your project should load normally.
I hope that this informations help somebody to understand a bit more how the VS works and help solve the problems when necessary.
I checked if i could create a new solution and was unable because SSAS,SSIS and SSRS weren't there as options.
I downloaded SSDT from here and installed and it worked...
https://learn.microsoft.com/en-us/sql/ssdt/download-sql-server-data-tools-ssdt?view=sql-server-2017
In case you came here looking for the issue with ".smproj" file, it is because you are missing SQL Server Analysis Services(SSAS). To over come this, install SQL Server Data Tools(SSDT) in your system, restart your Visual Studio and it will work.
Thanks.
This is my answer, I think it's useful. Please follow below steps:
1.First check your Visual studio version is 2012, 2015 or 2017 etc.
2.Your project is developed in 2015, but your visual studio 2012, then visual studio 2012 should not open the which are developed in visual studio 2015 projects.
3.If developed project visual studio 2012 and you have visual studio 2012, open the project but here need to check one option as per below
a) Target Framework - Open your project ".csproj" file with notepad++ and search with "TargetFrameworkVersion" and observe target framework value.
b) Open any existing project in your visual studio - Select project at 'Solution Explorer' - Right click - Properties - Application -Select Target Framework - Observe highest your framework which you have
c) 3.a and 3.b frameworks both are should same otherwise applications are not open
d)If your target framework less than the project framework should install the latest's
e) above options do not work just Simply have another option modify the "TargetFrameworkVersion" value in '.csproj' file which is have in your visual studio.
Ex: in my visual studio target framework 4.0 but in '.csproj' file have TargetFrameworkVersion - 4.5, You need just change 4.5 to 4.0 and open the project
This issue might be caused when using VS 2015 with Update 3 installed on one PC and without update 3 installed on another. This was the problem in my case.
I'm working in VB project with VS 2012 and after finish I try to add setup project.
I didn't find it (because the Setup Project was discontinued after VS2010) so I switched to VS2010 but the problem is the project wont open and I get this message:
The selected file is a solution file but was created by a newer
version of this application and cannot be opened.
I tried this article : http://www.codeproject.com/Tips/80953/Converting-VS2010-Solution-to-VS2008
and tried to convert from 2012 to 2010 but same message appears.
Open you solution file in notepad. Make 2 changes
Replace "Format Version 12.00" with "Format Version 11.00" (without quotes.)
Replace "# Visual Studio 2012" with "# Visual Studio 2010" (without quotes.)
Just to elaborate on Bhavin's excellent answer - editing the solution file works but you may still get the incompatible error (as David reported) if you had .NET 4.5 selected as the default .NET version in your VS2012 project and your VS2010 enviroment doesn't support that.
To quickly fix that, open the VS2012 .csproj file in a text editor and change the TargetFrameworkVersion down to 4.0 (from 4.5). VS2010 will then happily load the "edited" solution and projects.
You'll also have to edit an app.config files that have references to .NET 4.5 in a similar way to allow them to run on a .NET 4.0 environment.
I had a similar problem and none of the solutions above worked, so I went with an old standby that always works:
Rename the folder containing the project
Make a brand new project with the same name with 2010
Diff the two folders and->
Copy all source files directly
Ignore bin/debug/release etc
Diff the .csproj and copy over all lines that are relevant.
If the .sln file only has one project, ignore it. If it's complex, then diff it as well.
That almost always works if you've spent 10 minutes at it and can't get it.
Note that for similar problems with older versions (2008, 2005) you can usually get away with just changing the version in the .csproj and either changing the version in the .sln or discarding it, but this doesn't seem to work for 2013.
the simplest solution is.....open your website in vs2013 and go to Debug->WebsiteProperties (last option) a new window will open..
in this window go to "Build" option and change .net framework version from 4.5 to 4.0.....then select ok.
[note: this step will only work if your project does not have dependencies with vs2013...]
Now open your website in vs2010
Open the project file and not the solution. The project will be converted by the Wizard, and after converted, when you build the project, a new Solution will be generated as a VS2010 one.
Solution of VS2010 is supported by VS2012.
Solution of VS2012 isn't supported by VS2010
--> one-way upgrade only.
VS2012 doesn't support setup projects.
Find here more about VS2010/VS2012 compatibility: http://msdn.microsoft.com/en-us/library/hh266747(v=vs.110).aspx
Simple solution which worked for me.
Install Vim editor for windows.
Open VS 2012 project solution using Vim editor and modify the version targetting Visual studio solution 10.
Open solution with Visual studio 2010.. and continue with your work ;)
I'm currently having trouble with building the OpenCV.sln file after generating them in Cmake. I am currently using windows 7 64 bit OS and VS 2010 Express. Also the OpenCV version I am using is 2.4.2 Once I open the OpenCV.sln file it would inform me that "solution folders are not supported in this version of the application".
Hitting the F5 button to build the .sln file would only yield in 8 successful build with the others tagged as failures. Is there anyway to fix this problem? thanks!
In the newest CMake there is a 'use solution folders' option. So before you generate, go to enable->solution folders and uncheck it.
Problem
Solution folders are only supported in the non-express versions of Visual Studio. I had the same problem when I first tried to install mine.
Source: http://social.msdn.microsoft.com/Forums/en/Vsexpressvc/thread/2a8e62c8-e14f-4027-8704-7d943c99303e
Solution
I used this tutorial to get OpenCV to work.
It's not the latest version, but it worked marvelously well.
I have got some old sources written in Visual Basic. There are *.bas, *.cls, *.frm and *.vbp files. As I understand, vbp is a project file. But I cannot open it with my Visual Studio 2008.
What version of VS should I install to open *.vbp file? Google says it is Visual Studio 6, but I am not sure and I cannot find Visual Studio 6 for downloading. Is there any publicly available free edition of Visual Studio 6 with Visual Basic?
Thanks.
vbp is indeed a VB 5/6 Project File.
VS6/VB5/VB6 are not free, so if you want to build the project you will need to spend $5 on ebay.
The VB5 Control Creation Edition (build COM components only) was the only free version MS released.
Older versions of VS.net included a way to import a VBP and upgrade it to VB.NET, but YMMV (significantly).
Edit; If you just want to look at the source/project structure all the files except .frx are plain ascii.
If you have an MSDN subscription, then VB6 is available as a free download. Otherwise try ebay like Alex suggests, but it usually costs significantly more than $5.
Microsoft recommends users get a 3rd party conversion program called ArtinSoft,
http://msdn.microsoft.com/en-us/ff793478
When opening the vbp file which is the project file, you will most likely have an import wizard show up, which after trying to import the project it will likely tell you there are a bunch of dependencies vb6 used to use which .net does not and will error out. You need to have vb5/6 installed or at least the dependency files installed in order to proceed with the import. You can view source code from the plain ascii text files of the .frM files.
To get a working copy of visual basic follow the following steps.
after much research I found out that the original Vb6 was distributed as a disk set, all CD's are just ISO files built up of folders and files. You can get a copy of an original ISO here. There is a google drive version floating around on the web of the ISO but personally that just seems really sketchy to me.
https://winworldpc.com/product/microsoft-visual-bas/60
in order to use the ISO you will need to unzip the ISO with WinRar, so download a copy of WinRar (its a widely used file archiver tool)
follow the install instructions here https://youtu.be/LXvd8IRw_ZI
"How to Install Visual Basic 6.0 on Windows 7/8/8.1/10" by "Matthew Marcelo"
** be sure to run the installation as administrator ** .\Micrsosoft Visual Basic 6.0\extracted\SETUP.EXE
after getting everything installed I realized I needed a copy of the MSDN library (version October 1999) which is the developer documentation for using VB6, that is found here https://winworldpc.com/product/msdn/october-1999
--
if you are like me and had to get VB6 working because of a very old legacy project and you had no clue what .OCX (controller) files were, and you got a bunch of error messages when you open the main project .VBP file, when you get ahold of the files and install them, installing them as admin usually does the trick by making a batch file, or running an administrator powershell/cmd window
regsvr32.exe \path\to\file.ocx
you need Visual Basic, not Visual Studio to open these files. or you can open it using a normal text editor like sublime text file separately. but if you want to open it like a project then you should use Microsoft Visual Basic 6.0 / 5.0 . There is a portable version too.
If you still want to open .vbp file using visual studio try to use VB tools for Visual Studio. I think it will help you.