I need make something like
$ source /etc/environments # called in bash.sh script
Of course after script finished no changes apply to shell.
I know this is tricky if because child process cant modify parent 'bash' process. But May be another way to do so?
You should use
source bash.sh
Then it runs in the original shell instead of a child process.
As you have observed yourself a child process cannot set persistent environment variables. One of the usual work around are writing something like this to stdout:
% cat my_script
#!/bin/bash
echo "export MY_VAR=1234"
And then used in a command substitution:
eval "$(./my_script)"
An example of such script is dircolors
Related
I am looking to execute a script but have it include another script before it executes. The problem is, the included script would be generated and the executed script would be unmodifiable. One solution I came up with, was to actually reverse the include, by having the include script as a wrapper, calling set to set the arguments for the executed script and then dotting/sourcing it. E.g.
#!/bin/bash
# Generated wrapper or include script.
: Performing some setup...
target_script=$1 ; shift
set -- "$#"
. "$target_script"
Where target_script is the script I actually want to run, importing settings from the wrapper.
However, the potential problem I face is that callers of the target script or even the target script itself may be expecting $0 to be set to the path of it's location on the file system. But because this wrapper approach overrides $0, the value of $0 may be unexpected and could produce undefined behaviour.
Is there another way to perform what is in effect, an LD_PRELOAD but in the scripted form, through bash without interfering with its runtime parameters?
I have looked at --init-file or --rcfile, but these only seem to be included for interactive shells.
Forcing interactive mode does seem to allow me to specify --rcfile:
$ bash --rcfile /tmp/x-include.sh -i /tmp/xx.sh
include_script: $0=bash, $BASH_SOURCE=/tmp/x-include.sh
target_script: $0=/tmp/xx.sh, $BASH_SOURCE=/tmp/xx.sh
Content of the x-include.sh script:
#!/bin/bash
echo "include_script: \$0=$0, \$BASH_SOURCE=$BASH_SOURCE"
Content of the xx.sh script:
#!/bin/bash
echo "target_script: \$0=$0, \$BASH_SOURCE=$BASH_SOURCE"
From the bash documentation:
When bash is started non-interactively, to run a shell script, for example, it looks for the variable BASH_ENV in
the environment, expands its value if it appears there, and uses the expanded value as the name of a file to read
and execute. Bash behaves as if the following command were executed:
if [ -n "$BASH_ENV" ]; then . "$BASH_ENV"; fi
but the value of the PATH variable is not used to search for the file name.
So that settles it then:
BASH_ENV=/tmp/x-include.sh /bin/bash /tmp/xx.sh
when I am in a Cygwin terminal, I can easily use the "source" command.
For example, let's say I have a file called "my_aliases.sh", that contains the following
#!/bin/bash -f
alias clear='cmd /c cls'
#unalias clear
Then on the Cygwin terminal, I can type
$source my_aliases.sh
And it just works fine, and whenever I type "clear", I can see that it works.
But I don't know why doing the same thing inside another shell script, and calling that shell script doesn't work.
For example, let's say that I have a file called "run_alias.sh", with the following content:
#!/bin/bash -f
#
a=`source my_aliases.sh`
b=`ls -ltr`
echo $a
echo $b
And when I try to run my file
$ ./run_alias.sh
It just doesn't do anything. For example, I can see that the command (b) takes place, but nothing happens for command (a).
But after I run "run_alias.sh", and type "clear", I get the following error:
$ clear
bash: clear: command not found
I even tried to change run_alias.sh as follows:
#!/bin/bash -f
echo `source my_aliases.sh`
But now when run run_alias.sh, and type clear, I get the exact same error message !!!
Any idea how to call the "source" command from some other shell script in Cygwin?
A child process cannot alter its parent's environment.
When you execute the run_alias.sh script, you launch a new bash process, which sources your alias file. Then the script ends, that bash process terminates and it takes its modified environment with it.
If you want your aliases to be automatically available, source it from your $HOME/.bashrc file.
Backticks create a subshell. The changes made to your environment in that subshell do not affect the calling environment.
Id you want your script (run_alias.sh) to have access to the environment in my_aliases.sh, call source directly.
source my_aliases.sh
b=`ls -lrt`
echo $b
and if you want the changes that run_alias.sh makes to its environment to propagate to it's parent, run source on the command line.
$ source run_alias.sh
I have a simple bash script:
#!/bin/bash
JAVA_HOME=/usr
EC2_HOME=~/ec2-api
echo $EC2_HOME
export PATH=$PATH:$EC2_HOME/bin
I run the script like so
$ ./ec2
/Users/user/ec2-api
The script runs and produces the correct output.
However, when I now try to access the EC2_HOME variable, I get nothing out:
$ echo $EC2_HOME
I get a blank string back. What am I doing wrong?
Do either of the following instead:
source ec2
or
. ec2
(note the . notation is just a shortcut for source)
Explanation:
This is because ./ec2 actually spawns a subshell from your current shell to execute the script, and subshells cannot affect the environment of the parent shell from which it spawned.
Thus, EC2_HOME does get set to /Users/user/ec2-api correctly in the subshell (and similarly the PATH environment variable is updated and exported correctly in the subshell as well), but those changes won't propagate back to your parent shell.
Using source runs the script directly in the current shell without spawning a subshell, so the changes made will persist.
(A note on export: export is used to tell new shells spawned from the current shell to use the variables exported from the current shell. So for any variables you would only use in the current shell, they need not be exported.)
A shell script can never modify the environment of their parent.
To fix your problem, you can use the dot (.) command:
$ . ./ec2
and that should work. In cshell, it would be
% source ./ec2
To learn more about shells and scripts, my best resource is by far Unix power tools.
I'm trying to modify an existing shell script to accept user input and handle some system exports. The below is an excerpt from a larger script. After running this script, I echo $TEST_DIR and I don't get anything back. Any ideas?
#!/bin/sh
if [ -z "$TEST_DIR" ]
then
echo "TEST_DIR was not set, please enter the path: "
read input_variable
export TEST_DIR=$input_variable
exit 1
fi
Save this as script.sh.
#!/bin/bash
if [ -z "$TEST_DIR" ]
then
echo "TEST_DIR was not set, please enter the path: "
read input_variable
export TEST_DIR=$input_variable
fi
And run it like this:
. ./script.sh
Or, equivalently:
source ./script.sh
source runs the script in the current environment and consequently lets you modify the environment in the script. Without it every command, which runs as a child of the shell process, is only given a copy of the current environment.
Note I removed the exit line, as it would terminate the shell in this case.
The problem is that you're running the script in a subshell - it's setting your TEST_DIR properly, but then the shell exits, and the parent shell doesn't keep the change.
You might be better off making this a function you can source from the parent shell. Shell scripts can't modify the environment of the calling shell, but a function can modify the shell it's executing in.
You probably don't want to do exit 1; that is used to indicate failure. You'd use exit 0 to indicate success — but, as described below, you don't want to do that, either, in this case.
The other problem is that if you run the script as child process, it cannot affect the environment of the parent process.
To work around that, in POSIX shells, you need to use:
. your_script.sh
or, in bash, you can also use:
source your_script.sh
The script does not have to be executable, just readable, and will be searched for on $PATH unless you specify a name containing a slash, just like other commands.
And, when you do the . or source, you definitely do not want any exit in the script because that will cause the main shell to exit. The shell reads the file as if you were typing it at standard input (more or less), so an exit that's executed will exit the shell.
I used 'change directory' in my shell script (bash)
#!/bin/bash
alias mycd='cd some_place'
mycd
pwd
pwd prints some_place correctly, but after the script finished my current working directory doesn't change.
Is it possible to change my path by script?
You need to source the file as:
. myfile.sh
or
source myfile.sh
Without sourcing the changes will happen in the sub-shell and not in the parent shell which is invoking the script. But when you source a file the lines in the file are executed as if they were typed at the command line.
While sourcing the script you want to run is one solution, you should be aware that this script then can directly modify the environment of your current shell. Also it is not possible to pass arguments anymore.
Another way to do, is to implement your script as a function in bash.
function cdbm() {
cd whereever_you_want_to_go
echo arguments to the functions were $1, $2, ...
}
This technique is used by autojump:
http://github.com/joelthelion/autojump/wiki
to provide you with learning shell directory bookmarks.
The script is run in a separate subshell. That subshell changes directory, not the shell you run it in. A possible solution is to source the script instead of running it:
# Bash
source yourscript.sh
# or POSIX sh
. yourscript.sh
It can be achieved by sourcing. Sourcing is basically execute the script in the same shell whereas normal execution(sh test.sh or ./test.sh) will create sub shell and execute script there.
test.sh
cd development/
ls
# Do whatever you want.
Execute test.sh by
source test.sh
. is shortest notation for source. So you can also do by
. test.sh
This will execute the script and change the directory of current shell to development/.
whenever you run a script on your login shell, a new subprocess is spawned and the script execution is done in a subshell.Once the script completes, the subshell exits and you are returned to the login shell.Hence whenever you do a cd through a script,the directory is changed to the path specified by cd, but by the time script finishes you come back to your login shell to the working directory from where you started the script.
The way to overcome this is use,
source yourscript.sh
what source does is it executes the script as TCL script, i.e it has the same effect as when you typed each line on the command line of your login shell and it executed from there. So this way when the script finishes after cd , it stays in that directory.
Another practical solution is to end your script by opening another shell session.
For instance:
#!/bin/bash
cd some_place
bash
This is useful, in my case, for scripts located in my ~/bin for instance, called from any other place. It is just a bit painful to type source ~/bin/mygoodoldscript instead of mygoo<TAB><ENTER>.
The downside is that the additional shell takes up a few more resources (not much).
Though there are answers. I think the intention of question is to use script to navigate to specific path.
Here is a simple practical solution works here without cancel out existing terminal environment flag.
provide a bash/tch/sh script to work for path generation
/* .goto.sh */
#!/usr/bin/env bash
echo '~/workspace'
add alias to the script output
alias goto 'cd `.goto.sh`'