I could not update brew update. There was fatal error all the time. I di dnot use brew for years so I thought I'll uninstall it and then install back. I run
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/uninstall)"
that went smoothly.
But after that when I try
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
It tells that
-bash: /usr/local/bin/ruby: No such file or directory
When I read how to install ruby it suggests brew install ruby but I have just uninstalled it.
I've searched over google and tried a lot of different commands but nothing works.
It's often the case that bash remembers where executables were in your path and if those are later removed it gets very confused. There's ways of rehashing this to update that, but creating a new shell usually fixes the issue just the same.
Specifying the full path to the system Ruby will also work.
Related
Error running '__rvm_make -j2',
please read /usr/share/rvm/log/1657548775_ruby-2.5.5/make.log
There has been an error while running make. Halting the installation.
After struggling a lot. This worked for me
rvm pkg install openssl
rvm remove x.x.x
rvm install x.x.x -C --with-openssl-dir=$HOME/.rvm/usr
Foreword: I encountered this problem while trying to install rvm in WSL2
Onto to the meat now.
You may encounter newer versions of this error marked by a different end switch. I mean, instead of the last switch being strictly -j2, yours might be -j3, j4, j5, or other subsequent ones. Therefore proceed to read below for a possible solution.
Shortly, I suggest two commands to resolve this error. Please do not run the installation suggestion that may appear immediately after running the first command. Instead, just proceed to run the second command.
On pasting the second command, replace <version> portion with the appropriate ruby version you would like to install. In my case, I wanted to install ruby version 2.7.4, and therefore, I set it as ruby-2.7.4
rvm pkg install openssl
rvm install ruby-<version> --with-openssl-dir=/usr/share/rvm/usr
However, if the above fix fails to remedy the ruby installation problem, you can ensure that rvm is added to the user group by running the command below:
rvm group add rvm $USER
After running the command above, close the Ubuntu app and reopen it. Then proceed to run the command below:
rvm fix-permissions
Now try reinstalling ruby with the command rvm install 2.7.4 --default. If problems persist, run sudo usermod -a -G rvm $USER and attempt a reinstall. If that fails, only further research gives you a chance.
PS:
Please note that I was making this installation in Windows Subsystem for Linux (WSL2) Ubuntu Therefore, if this problem persists in another system like macOS, it may mean that this solution is perhaps not platform agnostic, and thus, the specific solution for such requires further digging.
I ran into a similar problem - Error running "__rvm_make -j4". The bug was the lack of support for OpenSSL 3.0 when used on Ubuntu 22.04. You can try using "rbenv" instead of "rvm", it worked for me.
Had a similar error "Error running '__rvm_make -j10'" and solved with --with-out-ext=fiddle flag.
rvm install "ruby-2.7.0" --with-out-ext=fiddle
This on M1
you can try this command to solve the issue
sudo apt-get install curl git g++ make libssl-dev libreadline-dev zlib1g-dev
I have a problem installing homebrew in mac sierra.
I followed the instructions from this link:
https://coolestguidesontheplanet.com/installing-homebrew-on-macos-sierra-package-manager-for-unix-apps/
This is the command:
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
The link exists but when I type this in the terminal, I encounter this error:
curl: (35) Server aborted the SSL handshake
Can anyone suggest a solution to this?
Many thanks, Ill appreciate any help.
https://raw.githubusercontent.com/Homebrew/install/master/install
Open the link in browser and save the file as install.rb.
Then run
ruby install.rb
I run into this issue, and it is caused by the network unstabitily.
My solution is:
Uninstall the homebrew:
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/uninstall)"
Then install it again:
ruby -e "$(curl --insecure -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
It works for me.
Have you tried xcode-select --install before that command? This solution may work on some systems.
Another potential issue is your curl maybe too old. Upgrade to 7.46+ may solve this. You have to build curl from scratch if so.
If nothing helps, and you really want to install brew without second thought, try adding --insecure after -fsSL.
At last, you can always pull the git repo and install manually.
Please use this to install homebrew in MacOS, previous one was deprecated.
$ /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install.sh)"
A month ago I installed hombrew and pystuff to use python on my mac. Since then I've been doing more database oriented programming ie mysql and php. Long story short; I was trying to run xampp command stuff from the terminal but it wasn't working so I deduced that my installation paths for xampp (mamp) wasn't valid. I have since uninstalled xampp and tried installing with home-brew via this link: http://www.threeeyedbird.com/blog/2013/06/11/setting-up-a-local-dev-environment-with-homebrew/
The first line of installation;
ruby -e "$(curl -fsSL https://raw.github.com/mxcl/homebrew/go)"
yielded a result that told me the link was invalid so I;
brew ls
to make sure home-brew was already installed, and it was...
I have since uninstalled home-brew in this link
https://apple.stackexchange.com/questions/82807/how-to-cleanly-remove-homebrew
Now when I type:
brew ls
It says command not found which is good because i wanted to uninstall everything completely...
I want to install home-brew in the proprietary paths that would make for a great local developing environment i.e.; all the command line short cuts work, all the paths are correct etc
The only problem now when I enter the first line of the home-brew install for a fresh start (which installs home-brew): ruby -e "$(curl -fsSL https://raw.github.com/mxcl/homebrew/go)"
The terminal tells me the link is invalid. and i get a bad request 400 error
How can I download home-brew perfectly all things considered?
This was the link that didn't work
ruby -e "$(curl -fsSL https://raw.github.com/mxcl/homebrew/go)"
I just installed it using this link from the home-brew web page
ruby -e "$(curl -fsSL https://raw.github.com/Homebrew/homebrew/go/install)"
I tried to install Homebrew like this:
ruby -e "$(curl -fsSkL raw.github.com/mxcl/homebrew/go)"
It didn’t install correctly so I closed Terminal and tried again. Now it displays me the following message:
It appears Homebrew is already installed. If your intent is to reinstall you
should do the following before running this installer again:
rm -rf /usr/local/Cellar /usr/local/.git && brew cleanup
I tried to do that but without success. The following message is displayed:
brew: command not found
So, the problem is that Homebrew is installed but actually it is not installed. Any suggestions how to solve this problem? Thank you!
This seems to have resolved the issue for me
rm -rf /usr/local/Cellar /usr/local/.git
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
Afterward, I can now
brew doctor
You may also find the gist linked to at the following page of use:
https://github.com/Homebrew/homebrew/blob/master/share/doc/homebrew/FAQ.md
The URL contained in the command you are using is not correct. Ruby will dump out lines of HTML and then fail. Use this command instead:
ruby -e "$(curl -fsSkL raw.github.com/Homebrew/homebrew/go/install)"
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
this is work for me!
This worked for me:
ruby -e "$(curl -fsSL https://raw.github.com/Homebrew/homebrew/go/install)"
I removed the folder /usr/local/.git and homebrew installed just fine afterwards.
What was the message given when it didn't install correctly the first time? Is the brew binary present in /usr/local/bin ? If so, you probably just need to add it to your path, see: Error Installing Homebrew - Brew Command Not Found
Attempting to resolve the same issue, I found out that I had mistyped while making changes to my PATH. I did not have /usr/local/bin. I would then recommend running
$ echo $PATH
in terminal to see if you have the correct directories.You can also run
$ vi ~/.bash_profile
to see it and make changes if neccessary
If you cannot install by using curl try to open the install script from your browser, save it in a file called i.e brew_install.rb somewhere on your disk and run the script locally
ruby brew_install.rb
This worked for me.
Follow these steps
1 ==> ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/uninstall)"
2 ==> sudo rm -rf /usr/local/Homebrew/
sudo rm -rf /usr/bin/Homebrew/
3 ==> install brew
1 -- /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
2 -- sudo chown -R $(whoami) /usr/local/var/homebrew
If get these error try below command
Error: Failed to link all completions, docs and manpages:
sudo chown -R $(whoami) /usr/local/*
then follow these commands
/usr/local/bin/brew update --force
This is the most recent one that works for me.
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
I found it here in case it is updated later. https://brew.sh/
This question already has answers here:
Installing Homebrew on macOS
(24 answers)
Closed 2 years ago.
I've spent the bulk of my Friday trying to get the latest version of Ruby installed on my new MacBook Air (w/ Mountain Lion installed).
I have all the latest versions of XCode and command line tools. But I can't seem to get Homebrew to work! Here's a screenshot of where I keep getting stuck (I'm a new user, so can't embed this image).
As you can see I used the following to instal Homebrew:
ruby -e "$(curl -fsSkL raw.github.com/mxcl/homebrew/go/install)"
While there was a "warning" it seemed as though the installation worked:
Warning: /usr/local/bin is not in your PATH.
==> Installation successful!
Despite that, when I try to run "brew doctor" I received the following:
-bash: brew: command not found
Again, I'm trying to install homebrew, so i can instal the latest version of ruby -- I'm looking to learn to code in ruby, but kind of screwed if I can even get a development environment running! :)
The warning is telling you what is wrong. The problem is that brew is kept in /usr/local/bin
So, you can try /usr/local/bin/brew doctor
To fix it permanently alter your bash profile (.bashrc or .profile in your home directory) and add the following line:
export PATH=/usr/local/bin:$PATH
On Apple silicone it's
export PATH=/opt/homebrew/bin/:$PATH
Check XCode is installed or not.
gcc --version
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
brew doctor
brew update
http://techsharehub.blogspot.com/2013/08/brew-command-not-found.html "click here for exact instruction updates"
nano ~/.profile
add these lines:
export PATH="$HOME/.linuxbrew/bin:$PATH"
export MANPATH="$HOME/.linuxbrew/share/man:$MANPATH"
export INFOPATH="$HOME/.linuxbrew/share/info:$INFOPATH"
save the file:
Ctrl + X then Y then Enter
then render the changes:
source ~/.profile
This was just happening to me, but none of the suggestions above worked. I changed directories ("cd ~/tmp") and suddenly the command
ruby -e "$(curl -fsSL https://raw.github.com/Homebrew/homebrew/go/install)"
worked for me. Prior to changing directories I had been in a directory that is a Git repository. Perhaps that was interfering with the ruby and Git commands in the Brew install script.
You can run in terminal
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/linuxbrew/go/install)"
then install https://github.com/robbyrussell/oh-my-zsh.
When those complate run i.e pico editor pico .zshrc and past those lines:
export PATH="$HOME/.linuxbrew/bin:$PATH"
export MANPATH="$HOME/.linuxbrew/share/man:$MANPATH"
export INFOPATH="$HOME/.linuxbrew/share/info:$INFOPATH"
remember use brew doctor :)
try this
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Linuxbrew/linuxbrew/go/install)"
You can use this:
ruby -e "$(curl -fsSL https://raw.github.com/Homebrew/homebrew/go/install)"
to install homebrew.