I’m trying to define the architecture of an Hadoop cluster (about 10/15 nodes), mainly used for batch treatment (indicators pre-aggregation).
I identified 5 roles for my nodes: Master, Master HA, Slave, Service, Gateway and tried to distinguish the software component to install on them.
Here is the result. I'm not sure about it. Do the clients (Hive/Sqoop/Spark) have to be installed on the slave nodes?
Is this architecture look relevant to you? Is something missing? Thanks for the help!
Do the clients (Hive/Sqoop/Spark) have to be installed on the slave nodes?
Not really. Clients are nodes / servers which have the libraries to run your Hive/Sqoop/Spark jobs. As long as you submit you jobs from that machine there should be no problem.
According to me the architecture looks okay.
Related
I have three servers and I want to deploy Spark Standalone Cluster or Spark on Yarn Cluster on that servers.
Now I have some questions about how to allocate physical resources for a big data cluster. For example, i want to know whether i can deploy Spark Master Process and Spark Worker Process on the same node. Why?
Server Details:
CPU Cores: 24
Memory: 128GB
I need your help. Thanks.
Of course you can, just put host with Master in slaves. On my test server I have such configuration, master machine is also worker node and there is one worker-only node. Everything is ok
However be aware, that is worker will fail and cause major problem (i.e. system restart), then you will have problem, because also master will be afected.
Edit:
Some more info after question edit :) If you are using YARN (as suggested), you can use Dynamic Resource Allocation. Here are some slides about it and here article from MapR. It a very long topic how to configure memory properly for given case, I think that these resources will give you much knowledge about it
BTW. If you have already intalled Hadoop Cluster, maybe try YARN mode ;) But it's out of topic of question
I have cluster of 3 Mesos slaves, where I have two applications: “redis” and “memcached”. Where redis depends on memcached and the requirement is both of the applications/services should start on same node instead of different slave nodes.
So I have created the application group and added the dependency properly in the JSON file. After launching the JSON file via “v2/groups” REST API, I observe that sometime both application group will start on same node but sometimes it will start on different slaves which breaks our requirement.
So intent/requirement is; if any application fails to start on a slave both the application should failover to other slave node. Also can I configure the JSON file to tell Marathon to start the application group on slave-1 (specific slave first) if it is available else start it on other slave in a cluster. Due to some reason if this application group will start on other slave can Marathon relaunch the application group to slave-1 if it is available to serve the request.
Thanks in advance for help.
Edit/Update (2):
Mesos, Marathon, and DC/OS support for PODs is available now:
DC/OS: https://dcos.io/docs/1.9/usage/pods/using-pods/
Mesos: https://github.com/apache/mesos/blob/master/docs/nested-container-and-task-group.md
Marathon: https://github.com/mesosphere/marathon/blob/master/docs/docs/pods.md
I assume you are talking about marathon apps.
Marathon application groups don't have any semantics concerning co-location on the same node and the same is the case for dependencies.
You seem to be looking for a Kubernetes like Pod abstraction in marathon, which is on the roadmap but not yet available (see update above :-)).
Hope this helps!
I think this should be possible (as a workaround) if you specify the correct app contraints within the group's JSON.
Have a look at the example request at
https://mesosphere.github.io/marathon/docs/generated/api.html#v2_groups_post
and the constraints syntax at
https://mesosphere.github.io/marathon/docs/constraints.html
e.g.
"constraints": [["hostname", "CLUSTER", "slave-1"]]
should do. Downside is that there will be no automatic failover to another slave that way. Still, I'd be curious why both apps need to specifically run on the same slave node...
Sorry if my question appears to be naïve. We are planning to use CDH 5.3.0 or 5.4.0. We want to implement a multi-node cluster.
The example multi-node installations that I have seen/read on different blogs/resources have master and slaves on different hosts.
However, we are restrained by the number of hosts. We have only 2 powerful hosts ( 32 cores 400+ GB RAM), so if we decide to have master on one and slave on other, we will end up with only one slave. My questions are :
Is it possible to have master and slave on the same hosts?
Can I have more than one slave node on a single host.
Also does one need to pay to use Cloudera Manager or it is open-source like the rest of the components.
If you can point me in the direction of some resource which would help me understand above scenarios it would be helpful.
Thanks for your help.
Regards,
V
old question but no and wrong answer:
yes, it is possible to install Master & Worker services on a single host.
e.g. HDFS (NameNode and Datanode). You can even install a full cloudera or Hortonworks installation with ALL services on a single host if it is powerfull enough, but i would only recommend it for POC or testcases.
If you use cloudera or hortonworks without virtualization it is not possible to run multiple instances of the SAME worker services e.g. datanode on the same host. 1 Host 1 worker instance. everything else would not make sense.
Cloudera is a package of multiple open source projekt (Hadoop,Spark....) and other closed source parts like cloudera manager and other enterprise closed source features. But everything you need is free even for commercial use with the community licence.
Right now (2017): only cloudera navigator is the big feature which is not part of the community edition
Yes you can configure namenode and datanode both on a single node.
You cannot have more than two datanodes on a single machine.
Cloudera is open-source hadoop distribution.
Hi i have a small doubt , I have started to use in my curiosity but now i have the following problem
My scenario is like this - i have 10 machines connected in LAN and i need to create Name Node in one system and Data Nodes in remaining 9 machines . So do i need to install Hadoop on all the 10 machines ?
For example i have ( 1.. 10 ) machines , where machine1 is Server and from machine(2..9) are slaves[Data Nodes] so do i need to install hadoop on all 10 machines ?
And i have searched a lot On Hadoop cluster network on commodity machine but i dint get any thing related to Installation [ that is configuration]. Some of them given like how to config and install Hadoop on own system but not on the clustered environment
Can any one help me ? and give me the detailed idea or article suggested links to do the above process
Thanks
Yes, you need Hadoop installed in every node and each node should have the services started as for appropriate for its role. Also the configuration files, present on each node, have to coherently describe the topology of the cluster, including location/name/port for various common used resources (eg. namenode). Doing this manually, from scratch, is error prone, specially if you never did this before and you don't know exactly what you're trying to do. Also would be good to decide on a specific distribution of Hadoop (HortonWorks, Cloudera, HDInsight, Intel, etc)
I would recommend use one of the many deployment solutions out there. My favorite is Puppet, but I'm sure Chef will do too.
A different (perhaps better?) alternative is to use Ambari, which is a Hadoop specialized deployment and administering solution. See Deploying and Managing Hadoop Clusters with AMBARI.
Some Puppet resources to get you started: Using Vagrant, Puppet, Testing & Hadoop
Please verify below tutorial
http://www.michael-noll.com/tutorials/running-hadoop-on-ubuntu-linux-multi-node-cluster/
Hope it helps
Yes hadoop needs to be there on all the computers
For clustered Environment please go through the video
I am new to cloudera, I installed cloudera in my system successfully I have two doubts,
Consider a machine with some nodes already using hadoop with some data, Can we install Cloudera to use the existing Hadoop without made any changes or modifaction on data stored existing hadooop.
I installed Cloudera in my machine, I have another three machines to add those as clusters, I want to know, Am i want install cloudera in those three machines before add those machines as clusters ?, or Can we add a node as clusters without installing cloudera on that purticular nodes?.
Thanks in advance can anyone, please give some information about the above questions.
Answer to questions -
1. If you want to migrate to CDH from existing Apache Distribution, you can follow this link
Excerpt:
Overview
The migration process does require a moderate understanding of Linux
system administration. You should make a plan before you start. You
will be restarting some critical services such as the name node and
job tracker, so some downtime is necessary. Given the value of the
data on your cluster, you’ll also want to be careful to take recent
back ups of any mission-critical data sets as well as the name node
meta-data.
Backing up your data is most important if you’re upgrading from a
version of Hadoop based on an Apache Software Foundation release
earlier than 0.20.
2.CDH binary needs be installed and configured in all the nodes to have a CDH based cluster up and running.
From the Cloudera Manual
You can migrate the data from a CDH3 (or any Apache Hadoop) cluster to a CDH4 cluster by
using a tool that copies out data in parallel, such as the DistCp tool
offered in CDH4.
Other sources
Regarding your second question,
Again from the manual page
Important:
Before proceeding, you need to decide:
As a general rule:
The NameNode and JobTracker run on the the same "master" host unless
the cluster is large (more than a few tens of nodes), and the master
host (or hosts) should not
run the Secondary NameNode (if used), DataNode or TaskTracker
services. In a large cluster, it is especially important that the
Secondary NameNode (if used) runs on a separate machine from the
NameNode. Each node in the cluster except the master host(s) should
run the DataNode and TaskTracker services.
Additionally, if you use Cloudera Manager it will automatically do all the setup necessary i.e install the necessary selected components on the nodes in the cluster.
Off-topic: I had a bad habit of not referrring the manual properly. Have a clear look at it, it answers all our questions
Answer to your second question,
you can add directly, with installation few pre requisites like openssh-clients and firewalls and java.
these machines( existing node, new three nodes) should accept same username and password (or) you should set passwordless ssh to these hosts..
you should connect to the internet while adding the nodes.
I hope it will help you:)