I need a Makefile that allows me to enter make foo-program and, if any foo-program/**/*.hs file has changed since last build, build the target (output in foo-program/.stack-work).
Here is my directory tree:
project/
|-bar-other-program/
|-.stack-work/ # Generated output goes here
|-src/
|-BarOtherProgram.hs
|-test/
|-Tests.hs
|-foo-program/
|-.stack-work/ # Generated output goes here
|-src/
|-FooProgram.hs
|-test/
|-Tests.hs
|-notes/ # non-source, so no Make target for this
Here is what I have so far:
# evaluates to 'bar-other-program foo-program'
PROGS := $(shell find * -type f -name '*.hs' | cut -d'/' -f1 | uniq)
.SECONDEXPANSION:
$(PROGS): $$(wildcard $$#/src/*.hs) $$(wildcard $$#/test/*.hs)
# do-build $#
When I run make foo-program, whether the source has changed or not, I get:
make: Nothing to be done for 'foo-program'
UPDATE: My final (non-abstracted) Makefile can be found on GitHub. Note that my solution took a different turn than I intended when I wrote up this question. Looking at that Makefile also might also make it more clear as to my original goal.
I am not quite sure of the the purpose of cut -d'/' there.
But if you just want a list of *.hs files in the current directory (recursively found) and then build a target/executable based on whether they have changed, you can do something like this:
PROGS = $(subst ./,,$(shell find . -type f -name '*.hs'))
DEPS = $(addprefix stackwork/,$(addsuffix .dep,$(basename $(PROGS))))
DIRS = $(dir $(DEPS))
.PHONY: foo-program
foo-program: $(DEPS) $(DIRS)
stackwork/%.dep: %.hs | $(DIRS)
#echo making $#
#touch $#
$(DIRS):
#echo creating dir $#
#mkdir -p $#
clean:
#rm -rf $(DEPS) $(DIRS)
Where:
PROGS is your list of .hs files
DEPS is a list of generated dependency files (empty but date stamps will be used)
DIRS is a list of output directories that need to be created (I guess they don't exist by default since they are output folders?)
foo-program is a rule that you can call (PHONY because at the moment it does not create a real file)
%.dep: %.hs is a rule how to generate a .dep file (this could be a .o .obj or any other file type) which depends on its .hs file equivalent.
$(DIRS): is a rule to create your output directories if needed.
So if the .dep files don't exist, all of the .hs files will be "compiled". If all the .dep files exist and are up to date, then nothing will be compiled. If one or more file is out of date then just those files will be built. Here is the output of running this on my PC with a few test files:
admin#osboxes:~/sandbox$ make
creating dir stackwork/
creating dir stackwork/test/
creating dir stackwork/test/test2/
making stackwork/file.dep
making stackwork/test/file.dep
making stackwork/test/test2/file2.dep
admin#osboxes:~/sandbox$ make
make: Nothing to be done for 'foo-program'.
admin#osboxes:~/sandbox$ touch test/file.hs
admin#osboxes:~/sandbox$ make
making stackwork/test/file.dep
admin#osboxes:~/sandbox$ make
make: Nothing to be done for 'foo-program'.
My makefile failed. My idea was to extract files from a certain file and put them in a temporary directory. This is then rsync'ed to a source directory. Since rsync only updates when a file has changed, makefiles in the source directory do not remake unless necessary. I have isolated the problem below:
.PHONY: extract clean
FILES = filea1.cc filea2.cc filea3.cc \
filea1.hh filea2.hh filea3.hh \
filea1.py filea2.py filea3.py \
dir-cc/filea1.cc dir-cc/filea2.cc dir-cc/filea3.cc \
dir-cc/filea1.hh dir-cc/filea2.hh dir-cc/filea3.hh \
dir-py/filea1.py dir-py/filea2.py dir-py/filea3.py
PATTERN := $(sort $(addprefix build/%., $(patsubst .%,%,$(suffix $(FILES)))))
extract: $(addprefix build/, $(FILES))
$(PATTERN):
mkdir -p $(dir $#); echo "hello!" > $#
#build/%.cc:;mkdir -p $(dir $#); echo "hello!" > $#
#build/%.hh:;mkdir -p $(dir $#); echo "hello!" > $#
#build/%.py:;mkdir -p $(dir $#); echo "hello!" > $#
temp:
echo $(PATTERN)
clean:
rm -rf build
Doing make temp gets 'build/%.cc build/%.hh build/%.py' but 'make extract' fails to make all the files:
build:
dir-cc dir-py filea1.cc filea2.cc filea3.cc
build/dir-cc:
filea1.cc filea2.cc filea3.cc
build/dir-py:
filea1.py filea2.py filea3.py
The hh files are missing. Unbelievably, in the actual work, the cc files are missing. Anyway, commenting out $(PATTERN), and removing the comments so that the targets in the code above are separate, does get all the files:
build:
dir-cc filea1.cc filea1.py filea2.hh filea3.cc filea3.py
dir-py filea1.hh filea2.cc filea2.py filea3.hh
build/dir-cc:
filea1.cc filea1.hh filea2.cc filea2.hh filea3.cc filea3.hh
build/dir-py:
filea1.py filea2.py filea3.py
Since everything has to be automatic in the actual work, and the rule is the same for all the targets (so I should not have to retype it), I vastly prefer the first version. I read the manual but I am perplexed as to why make does this. I am using GNU Make 4.1.
It's explained in the last paragraph of the Pattern Intro section:
Pattern rules may have more than one target. Unlike normal rules, this does not act as many different rules with the same prerequisites and recipe. If a pattern rule has multiple targets, make knows that the rule’s recipe is responsible for making all of the targets. The recipe is executed only once to make all the targets.
You can't write a pattern rule with many different pattern targets, such that make will run the recipe once per individual target. That's not how it works.
You could do this, for your very simple case:
FILETYPES := $(sort $(suffix $(FILES)))
$(foreach T,$(FILETYPES),$(eval build/%$T: ; mkdir -p $$(#D); echo "hello!" > $$#))
There was a good resolution: use the ordinary (non pattern) multiple target
rule $(FILES):;rule and define pattern specific variable values to adjust
the rule to the file extension.
I'm trying to do something like this with make:
SRC := $(src/*.md)
DIST := $(subst -,/,$(patsubst src/%.md, dist/%/index.html, $(SRC)))
all: $(DIST)
$(DIST): $(SRC)
mkdir -p $(#D) && pandoc $< -o $#
E.g., the prerequisite src/2014-04-myfile.md is put into target dist/2014/04/myfile/index.html with the transform pandoc
But when I use $< it only refers to the first argument in the $(SRC) variable.
I know normally we would do something like:
dist/%.html: src/%.md
but since I changed the file name in the output to just index.html for all files and used the original file name to create a new path I'm not sure how to go about iterating over the prerequisites.
Here's one way it could be done. The way this works is that it iterates over $(SRC) to create one rule per source file. The $$ in MAKE_DEP are necessary to prevent make from interpreting the functions when it first reads the contents of MAKE_DEP. The documentation on call and eval are also useful.
SRC := $(wildcard src/*.md)
# Set the default goal if no goal has been specified...
.DEFAULT_GOAL:=all
#
# This is a macro that we use to create the rules.
#
define MAKE_DEP
# _target is a temporary "internal" variable used to avoid recomputing
# the current target multiple times.
_target:=$$(subst -,/,$$(patsubst src/%.md, dist/%/index.html, $1))
# Add the current target to the list of targets.
TARGETS:=$$(TARGETS) $$(_target)
# Create the rule proper.
$$(_target):$1
mkdir -p $$(#D) && pandoc $$< -o $$#
endef # MAKE_DEP
# Iterate over $(SRC) to create each rule.
$(foreach x,$(SRC),$(eval $(call MAKE_DEP,$x)))
.PHONY: all
all: $(TARGETS)
If I create:
src/2000-01-bar.md
src/2014-04-foo.md
and run $ make -n, I get:
mkdir -p dist/2000/01/bar && pandoc src/2000-01-bar.md -o dist/2000/01/bar/index.html
mkdir -p dist/2014/04/foo && pandoc src/2014-04-foo.md -o dist/2014/04/foo/index.html
This could also be done using secondary expansion but it did not appear to me to be simpler or nicer.
I have a "lib" directory in my applications main directory, which contains an arbitrary number of subdirectories, each having its own Makefile.
I would like to have a single Makefile in the main directory, that calls each subdirectory's Makefile. I know this is possible if I manually list the subdirs, but I would like to have it done automatically.
I was thinking of something like the following, but it obviously does not work. Note that I also have clean, test, etc. targets, so % is probably not a good idea at all.
LIBS=lib/*
all: $(LIBS)
%:
(cd $#; $(MAKE))
Any help is appreciated!
The following will work with GNU make:
LIBS=$(wildcard lib/*)
all: $(LIBS)
.PHONY: force
$(LIBS): force
cd $# && pwd
If there might be something other than directories in lib, you could alternatively use:
LIBS=$(shell find lib -type d)
To address the multiple targets issue, you can build special targets for each directory, then strip off the prefix for the sub-build:
LIBS=$(wildcard lib/*)
clean_LIBS=$(addprefix clean_,$(LIBS))
all: $(LIBS)
clean: $(clean_LIBS)
.PHONY: force
$(LIBS): force
echo make -C $#
$(clean_LIBS): force
echo make -C $(patsubst clean_%,%,$#) clean
There is also a way of listing sub-directories with gmake commands only, without using any shell commands:
test:
#echo $(filter %/, $(wildcard lib/*/))
This will list all sub-directories with trailing '/'. To remove it you can use the substitute pattern:
subdirs = $(filter %/, $(wildcard lib/*/))
test:
#echo $(subdirs:%/=%)
Then to actually create rules executing makefiles in each sub-directory you can use a small trick - a phony target in a non-existent directory. I think in this case an example will tell more than any explanation:
FULL_DIRS =$(filter %/, $(wildcard lib/*/))
LIB_DIRS =$(FULL_DIRS:%/=%)
DIRS_CMD =$(foreach subdir, $(LIB_DIRS), make-rule/$(subdir))
make-rule/%:
cd $* && $(MAKE)
all: DIRS_CMD
Basically, target 'all' lists all sub-directories as prerequisites. For example, if LIB_DIRS contained lib/folder1 lib/folder2 then the expansion would look like this:
all: make-rule/lib/folder1 make-rule/lib/folder2
Then 'make', in order to execute rule 'all', tries to match each prerequisite with an existing target. In this case the target is 'make-rule/%:', which uses '$*' to extract the string after 'make-rule/' and uses it as argument in the recipe. For example, the first prerequisite would be matched and expanded like this:
make-rule/lib/folder1:
cd lib/folder1 && $(MAKE)
What if you want to call different targets than all in an unknown number of subdirectories?
The following Makefile uses macros so create a forwarding dummy-target for a number of subdirectories to apply the given target from the command line to each of them:
# all direct directories of this dir. uses "-printf" to get rid of the "./"
DIRS=$(shell find . -maxdepth 1 -mindepth 1 -type d -not -name ".*" -printf '%P\n')
# "all" target is there by default, same logic as via the macro
all: $(DIRS)
$(DIRS):
$(MAKE) -C $#
.PHONY: $(DIRS)
# if explcit targets where given: use them in the macro down below. each target will be delivered to each subdirectory contained in $(DIRS).
EXTRA_TARGETS=$(MAKECMDGOALS)
define RECURSIVE_MAKE_WITH_TARGET
# create new variable, with the name of the target as prefix. it holds all
# subdirectories with the target as suffix
$(1)_DIRS=$$(addprefix $(1)_,$$(DIRS))
# create new target with the variable holding all the subdirectories+suffix as
# prerequisite
$(1): $$($1_DIRS)
# use list to create target to fullfill prerequisite. the rule is to call
# recursive make into the subdir with the target
$$($(1)_DIRS):
$$(MAKE) -C $$(patsubst $(1)_%,%,$$#) $(1)
# and make all targets .PHONY
.PHONY: $$($(1)_DIRS)
endef
# evaluate the macro for all given list of targets
$(foreach t,$(EXTRA_TARGETS),$(eval $(call RECURSIVE_MAKE_WITH_TARGET,$(t))))
Hope this helps. Really helpfull when dealing with paralelism: make -j12 clean all in a tree with makefiles having these targets... As always: playing with make is dangerous, different meta-levels of programming are too close together ,-)
I want to create directories using makefile. My project directory is like this
+--Project
+--output
+--source
+Testfile.cpp
+Makefile
I want to put all the objects and output into the respective output folder. I want to create folder structure which would be like this after compiling.
+--Project
+--output
+--debug (or release)
+--objs
+Testfile.o
+Testfile (my executable file)
+--source
+Testfile.cpp
+Makefile
I tried with several options, but could not succeed. Please help me to make directories using make file. I'm posting my Makefile for your consideration.
#---------------------------------------------------------------------
# Input dirs, names, files
#---------------------------------------------------------------------
OUTPUT_ROOT := output/
TITLE_NAME := TestProj
ifdef DEBUG
TITLE_NAME += _DEBUG
else
ifdef RELEASE
TITLE_NAME += _RELEASE
endif
endif
# Include all the source files here with the directory tree
SOURCES := \
source/TestFile.cpp \
#---------------------------------------------------------------------
# configs
#---------------------------------------------------------------------
ifdef DEBUG
OUT_DIR := $(OUTPUT_ROOT)debug
CC_FLAGS := -c -Wall
else
ifdef RELEASE
OUT_DIR := $(OUTPUT_ROOT)release
CC_FLAGS := -c -Wall
else
$(error no build type defined)
endif
endif
# Put objects in the output directory.
OUT_O_DIR := $(OUT_DIR)/objs
#---------------------------------------------------------------------
# settings
#---------------------------------------------------------------------
OBJS = $(SOURCES:.cpp=.o)
DIRS = $(subst /,/,$(sort $(dir $(OBJS))))
DIR_TARGET = $(OUT_DIR)
OUTPUT_TARGET = $(OUT_DIR)/$(TITLE_NAME)
CC_FLAGS +=
LCF_FLAGS :=
LD_FLAGS :=
#---------------------------------------------------------------------
# executables
#---------------------------------------------------------------------
MD := mkdir
RM := rm
CC := g++
#---------------------------------------------------------------------
# rules
#---------------------------------------------------------------------
.PHONY: all clean title
all: title
clean:
$(RM) -rf $(OUT_DIR)
$(DIR_TARGET):
$(MD) -p $(DIRS)
.cpp.o:
#$(CC) -c $< -o $#
$(OBJS): $(OUT_O_DIR)/%.o: %.cpp
#$(CC) -c $< -o $#
title: $(DIR_TARGET) $(OBJS)
In my opinion, directories should not be considered targets of your makefile, either in technical or in design sense. You should create files and if a file creation needs a new directory then quietly create the directory within the rule for the relevant file.
If you're targeting a usual or "patterned" file, just use make's internal variable $(#D), that means "the directory the current target resides in" (cmp. with $# for the target). For example,
$(OUT_O_DIR)/%.o: %.cpp
#mkdir -p $(#D)
#$(CC) -c $< -o $#
title: $(OBJS)
Then, you're effectively doing the same: create directories for all $(OBJS), but you'll do it in a less complicated way.
The same policy (files are targets, directories never are) is used in various applications. For example, git revision control system doesn't store directories.
Note: If you're going to use it, it might be useful to introduce a convenience variable and utilize make's expansion rules.
dir_guard=#mkdir -p $(#D)
$(OUT_O_DIR)/%.o: %.cpp
$(dir_guard)
#$(CC) -c $< -o $#
$(OUT_O_DIR_DEBUG)/%.o: %.cpp
$(dir_guard)
#$(CC) -g -c $< -o $#
title: $(OBJS)
This would do it - assuming a Unix-like environment.
MKDIR_P = mkdir -p
.PHONY: directories
all: directories program
directories: ${OUT_DIR}
${OUT_DIR}:
${MKDIR_P} ${OUT_DIR}
This would have to be run in the top-level directory - or the definition of ${OUT_DIR} would have to be correct relative to where it is run. Of course, if you follow the edicts of Peter Miller's "Recursive Make Considered Harmful" paper, then you'll be running make in the top-level directory anyway.
I'm playing with this (RMCH) at the moment. It needed a bit of adaptation to the suite of software that I am using as a test ground. The suite has a dozen separate programs built with source spread across 15 directories, some of it shared. But with a bit of care, it can be done. OTOH, it might not be appropriate for a newbie.
As noted in the comments, listing the 'mkdir' command as the action for 'directories' is wrong. As also noted in the comments, there are other ways to fix the 'do not know how to make output/debug' error that results. One is to remove the dependency on the the 'directories' line. This works because 'mkdir -p' does not generate errors if all the directories it is asked to create already exist. The other is the mechanism shown, which will only attempt to create the directory if it does not exist. The 'as amended' version is what I had in mind last night - but both techniques work (and both have problems if output/debug exists but is a file rather than a directory).
Or, KISS.
DIRS=build build/bins
...
$(shell mkdir -p $(DIRS))
This will create all the directories after the Makefile is parsed.
make in, and off itself, handles directory targets just the same as file targets. So, it's easy to write rules like this:
outDir/someTarget: Makefile outDir
touch outDir/someTarget
outDir:
mkdir -p outDir
The only problem with that is, that the directories timestamp depends on what is done to the files inside. For the rules above, this leads to the following result:
$ make
mkdir -p outDir
touch outDir/someTarget
$ make
touch outDir/someTarget
$ make
touch outDir/someTarget
$ make
touch outDir/someTarget
This is most definitely not what you want. Whenever you touch the file, you also touch the directory. And since the file depends on the directory, the file consequently appears to be out of date, forcing it to be rebuilt.
However, you can easily break this loop by telling make to ignore the timestamp of the directory. This is done by declaring the directory as an order-only prerequsite:
# The pipe symbol tells make that the following prerequisites are order-only
# |
# v
outDir/someTarget: Makefile | outDir
touch outDir/someTarget
outDir:
mkdir -p outDir
This correctly yields:
$ make
mkdir -p outDir
touch outDir/someTarget
$ make
make: 'outDir/someTarget' is up to date.
TL;DR:
Write a rule to create the directory:
$(OUT_DIR):
mkdir -p $(OUT_DIR)
And have the targets for the stuff inside depend on the directory order-only:
$(OUT_DIR)/someTarget: ... | $(OUT_DIR)
All solutions including the accepted one have some issues as stated in their respective comments. The accepted answer by #jonathan-leffler is already quite good but does not take into effect that prerequisites are not necessarily to be built in order (during make -j for example). However simply moving the directories prerequisite from all to program provokes rebuilds on every run AFAICT.
The following solution does not have that problem and AFAICS works as intended.
MKDIR_P := mkdir -p
OUT_DIR := build
.PHONY: directories all clean
all: $(OUT_DIR)/program
directories: $(OUT_DIR)
$(OUT_DIR):
${MKDIR_P} $(OUT_DIR)
$(OUT_DIR)/program: | directories
touch $(OUT_DIR)/program
clean:
rm -rf $(OUT_DIR)
I've just come up with a fairly reasonable solution that lets you define the files to build and have directories be automatically created. First, define a variable ALL_TARGET_FILES that holds the file name of every file that your makefile will be build. Then use the following code:
define depend_on_dir
$(1): | $(dir $(1))
ifndef $(dir $(1))_DIRECTORY_RULE_IS_DEFINED
$(dir $(1)):
mkdir -p $$#
$(dir $(1))_DIRECTORY_RULE_IS_DEFINED := 1
endif
endef
$(foreach file,$(ALL_TARGET_FILES),$(eval $(call depend_on_dir,$(file))))
Here's how it works. I define a function depend_on_dir which takes a file name and generates a rule that makes the file depend on the directory that contains it and then defines a rule to create that directory if necessary. Then I use foreach to call this function on each file name and eval the result.
Note that you'll need a version of GNU make that supports eval, which I think is versions 3.81 and higher.
given that you're a newbie, I'd say don't try to do this yet. it's definitely possible, but will needlessly complicate your Makefile. stick to the simple ways until you're more comfortable with make.
that said, one way to build in a directory different from the source directory is VPATH; i prefer pattern rules
OS independence is critical for me, so mkdir -p is not an option. I created this series of functions that use eval to create directory targets with the prerequisite on the parent directory. This has the benefit that make -j 2 will work without issue since the dependencies are correctly determined.
# convenience function for getting parent directory, will eventually return ./
# $(call get_parent_dir,somewhere/on/earth/) -> somewhere/on/
get_parent_dir=$(dir $(patsubst %/,%,$1))
# function to create directory targets.
# All directories have order-only-prerequisites on their parent directories
# https://www.gnu.org/software/make/manual/html_node/Prerequisite-Types.html#Prerequisite-Types
TARGET_DIRS:=
define make_dirs_recursively
TARGET_DIRS+=$1
$1: | $(if $(subst ./,,$(call get_parent_dir,$1)),$(call get_parent_dir,$1))
mkdir $1
endef
# function to recursively get all directories
# $(call get_all_dirs,things/and/places/) -> things/ things/and/ things/and/places/
# $(call get_all_dirs,things/and/places) -> things/ things/and/
get_all_dirs=$(if $(subst ./,,$(dir $1)),$(call get_all_dirs,$(call get_parent_dir,$1)) $1)
# function to turn all targets into directories
# $(call get_all_target_dirs,obj/a.o obj/three/b.o) -> obj/ obj/three/
get_all_target_dirs=$(sort $(foreach target,$1,$(call get_all_dirs,$(dir $(target)))))
# create target dirs
create_dirs=$(foreach dirname,$(call get_all_target_dirs,$1),$(eval $(call make_dirs_recursively,$(dirname))))
TARGETS := w/h/a/t/e/v/e/r/things.dat w/h/a/t/things.dat
all: $(TARGETS)
# this must be placed after your .DEFAULT_GOAL, or you can manually state what it is
# https://www.gnu.org/software/make/manual/html_node/Special-Variables.html
$(call create_dirs,$(TARGETS))
# $(TARGET_DIRS) needs to be an order-only-prerequisite
w/h/a/t/e/v/e/r/things.dat: w/h/a/t/things.dat | $(TARGET_DIRS)
echo whatever happens > $#
w/h/a/t/things.dat: | $(TARGET_DIRS)
echo whatever happens > $#
For example, running the above will create:
$ make
mkdir w/
mkdir w/h/
mkdir w/h/a/
mkdir w/h/a/t/
mkdir w/h/a/t/e/
mkdir w/h/a/t/e/v/
mkdir w/h/a/t/e/v/e/
mkdir w/h/a/t/e/v/e/r/
echo whatever happens > w/h/a/t/things.dat
echo whatever happens > w/h/a/t/e/v/e/r/things.dat
See https://www.oreilly.com/library/view/managing-projects-with/0596006101/ch12.html
REQUIRED_DIRS = ...
_MKDIRS := $(shell for d in $(REQUIRED_DIRS); \
do \
[[ -d $$d ]] || mkdir -p $$d; \
done)
$(objects) : $(sources)
As I use Ubuntu, I also needed add this at the top of my Makefile:
SHELL := /bin/bash # Use bash syntax
I use the makefiles in windows environment and my simple solution is as follows,
Create a target makedir and add it as a prerequisites to where ever it is required.
# Default goal
all: gccversion makedir build finalize list sizeafter completed
The makedir target is (applicable only in windows environment)
makedir:
#IF NOT EXIST $(subst /,\,$(BUILD_DIR)) mkdir $(subst /,\,$(BUILD_DIR)) 2> NULL
#IF NOT EXIST $(subst /,\,$(OUTPUT_DIR)) mkdir $(subst /,\,$(OUTPUT_DIR)) 2> NULL
#IF NOT EXIST $(subst /,\,$(DEP_DIR)) mkdir $(subst /,\,$(DEP_DIR)) 2> NUL
#IF NOT EXIST $(subst /,\,$(OBJ_DIR)) mkdir $(subst /,\,$(OBJ_DIR)) 2> NUL
$(subst /,\,$(BUILD_DIR)) converts the directory separator / to \ and
mkdir $(subst /,\,$(BUILD_DIR)) 2> NUL redirects the error if any.
src_dir := src
obj_dir := obj
build_dir := build
dirs := $(src_dir) $(obj_dir) $(build_dir) # new variable
all: $(dirs) $(other_dependencies) # added dependency (*before* any others)
$(dirs): # rule which makes missing directories
mkdir $#
Won't clutter your terminal with "cannot create directory" error messages. If the directories exist, they don't need to be built.
Works like any other dependency, only requires one rule and one variable.