Okay this is my ToolChain setup:
I got a bat script that is calling a further bat script
The second bat script is calling an .exe which is performing autoit's on a software like starting, saving and closing.
In other words: bat > bat > exe (AutoIt) > exe (a Parser)
Okay here is the issue, the software (Parser) that will be started at least is some kind of weird, it won't find important files, if it's not being started from the same directory.
So as example if i put my autoit .exe or my .bat file into the directory of the software and start it - all is fine. But if i move my exe or my bat scripts outside of the directory and call it, it won't find files to start working.
For exactly this reason i made a second bat file and tried to set the path (set PATH=%PATH%;D:/filetype/dbcparser/) but that didn't have any effect on my case; if i call every bat or exe file not from the directory, it won't work correctly.
I hope someone found something like this before and could give me a hint for a workaround.
I was in the same situation, but using cd before start worked for me(whole file):
#echo off
cd "<start here>"
start "" call "<start here>your.bat"
also if you have PATH problems, try even this:
#echo off
cd "<start here>"
set PATH=<something>;%PATH%
start "" call "<start here>your.bat"
Related
ok...Im a new member here and I can express how jolly I am...back to subject
I made a bat file, lets call it 1.bat and I used iexpress to make it an exe file, lets call it 1.exe.
So, in the batch file I added the command line to add a vbs file ( call it 1.vbs ) which is also included in the exe package (1.bat and 1.vbs are in 1.exe) but it installs 1.bat, so in the command I typed:
copy "1.vbs" "C:\Users\%username%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup"
If I run the bat file it copies the vbs file to start up, but if I make the 1.exe file in iexpress by including 1.bat and 1.vbs and when I click the 1.exe file, it doesnt work, it doesn't copy the vbs file to startup, it says something about too many parameters.
I'm sorry if my post is too long or my question have been posted before, but I couldn't found any thread solves my issues, if there is, i'd be glad to be enlightened.
Thanks.
Never use "Batch to EXE" converter, they often do not work as expected. Simply use the batch script.
Just a note, this file actually only acts as a wrapper for your script, and the script itself actually gets executed in a temp folder created on execution (and deleted afterwards), so make sure you don't use any relative paths.
source
When running a batch file in IExpress, you need to call it like:
cmd /c 1.bat
If you don’t, variables like %username%, long file names, etc, will likely not work.
I suspect you are using short file names. Put in your bat dir then pause and you'll see it's 1~1.vbs or similar.
So I tried and tried but couldn't figure out this one for some reason.
how can I run a task from a desired directory instead of System32 directory where cmd.exe is.
so, when I schedule a task and try to run it ..
command prompt suppose to go to "c:\users\aaa\bbb\ccc" and then pass the argument.
Instead, It's starts at c:\Windows\System32 and fails.
Could anybody help me with this please?
I really appreciate it.
Thank you.
EDIT --
so, now I have a run.bat file with following content in it ...
C:\Users\aaa\bbb\ccc\dd (location to my testrunner.bat file)
testrunner.bat Scripts/all.suite website-address ie (command for the task I wanna perform)
net stop schedule (since window is poping up and going away way to fast, I added this to stop it (not working))
type run.bat
#echo off
cd C:\Users\aaa\bbb\ccc\dd
rem this will show all files in dir
rem is the file you're expecting listed?
dir
rem notice how you can make comments with a leading rem(ark)
#echo starting scripts\all.suite
rem you have to change this to have the full path using Windows X:\dir\dir conventions
c:\home\Scripts\all.suite website-address
#echo done running scripts\all.suite website-address
#echo shutting down
net stop schedule
So its still not clear exactly to me your goal. The reason I added the cd c:\... command is that will **C**hange **D**irectory to the path specified.
This is what you need so you can "run a task from a desired directory instead of System32".
Copy everything from the first #echo off to the last net stop and using notepad, paste it into a file, fix command names and paths website-urls, etc, then save that file to c:\temp\testrunner.bat.
Open a cmd.exe window and test that the script works. Just paste c:\temp\testrunner.bat on to cmd-line and hit enter. If that works, then made an entry in the scheduler to run c:\temp\testrunner.bat . I don't know the specifics of running a script for scheduler, so look for clues on the input screen. Is the an option to run 'now'?
If the .bat file doesn't work from the command-line, then you have to fix the file before you try running it in the scheduler. As your command Scripts/all.suite website-address is a little vague, you'll do better to post a new question asking for help to fix the .bat file and use a sample command that people will be able to use on their PCs at home.
IHTH.
I'm working with installshield and have a group of batch files that I want to run as part of the install process. Instead of executing each batch file from installshield I want to create one batch file that executes all of the batch files.
The issue I have is that the calling batch file sits two directories up from the others. When the batch file tries to call the others they fail to run because they can not find the resources that they need. It seems that when they are executed from the batch file two directories up they are for some reason using the relative path of the calling batch file. Is my assumption correct?
One of the batch files that I am calling is a batch file to star an h2 database the call looks like this:
call h2\bin\h2.bat
If I go to the /h2/bin directory in a command prompt the h2.bat runs fine but once I run it from the calling batch file this is the error that I get.
Error: Could not find or load main class org.h2.tools.Console
How do I call one batch file from another without using the calling batch files path?
Explanation
It seems that when they are executed from the batch file two
directories up they are for some reason using the relative path of the
calling batch file. Is my assumption correct?
Yes your assumption is correct. Calling a batch file will not change the current working directory. The main batch file will be found because you are providing the correct relative path, but all the other relative paths will be seen from the perspective of your current working directory, not from the directory that contains the main batch file.
%~dp0 is your friend, it yields the drive letter and path to the batch file containing that character sequence. Use it as a basis for relative paths and your batch files will work no matter who calls them from where.
Example:
Fictitious h2.bat that won't work:
#echo off
h2.exe start
Working h2.bat:
#echo off
"%~dp0\h2.exe" start
See What does %~dp0 mean, and how does it work? for more explanations on %~dp0
Try setting the directory:
cd ht\bin\
call h2.bat
cd %HOMEPATH%
REM just reset to where ever you were before.
If that doesn't work, try using the C:// prefix in your path. That might/might not work.
Good Luck!
Suppose current .bat file is running in C drive and you want to run .bat file placed in D: directory then in first .bat write.
D:
cd "D:/folder/folder2/"
call batFile.bat
It might be because you don't have permission. M facing the same problem and i found the solution like this -
Right click on your task than properties.
In properties click on General tab and then click on 'User Group or User' and select appropriate user.
Or create a another bat file to call your bat file and schedule that file. you can create the bat file like this -
open Notepad and give your original bat file path and then call bat file with name like -
D:
cd "E:/ABC/FirstJob/main/"
call main_run.bat
Now save this file with .bat extension.
if your bat file is correct, try cmd command as below and hit enter(tried in windows 10):
"\h2.bat"
e.g: "C:\Users..\bin\h2.bat"
I tried :
pushd h2\bin\
call h2.bat
=> It 's okay.
My program needs .bat file to run because the .bat file is changing some language settings, so .bat file looks like:
set lang=en
start ap.exe
It is working great but when I made installer for my app and pointed .bat file as main file, it creates a shortcut on the desktop to that .bat file. So far everything is great but when I launch that shortcut it cannot open app.exe because it can't find it on desktop.
So my question is: How can I get path to folder of .bat file so I could set proper start command? Something like:
set lang=en
S=getpath();
start S/app.exe
It is just pseudocode but I think you get point.
You can write %~dp0 to get the directory containing the batch file.
Therefore, you can write
"%~dp0app.exe"
i am using 'Bat to Exe Converter' to convert my batch files to exe format.
Now, i am running into some problems.
Whenever i convert something, and i set 'Working Directory' to 'Current Directory', and i start my exe in echo on mode, this is what i end up with to check if there is a specific file in the directory of my exe:
the actual command: if not exist "%~dp0\file.txt" goto :nofile
output: if not exist "C:\Users\MyUser\AppData\Local\Temp\4CBC\\file.txt" goto :nofile
Can anyone help me with this? I don't want it in the temp directory, i want it to be in the directory of my exe.
Thanks.
Without having Bat to Exe changed by the author, I think you have two options:
Remove the need for accessing %~dp0
Perhaps you can merge file.txt with the include option of Bat to Exe into the EXE file. If so, "file.txt" will automatically be unpacked in the current directory when running your compiled exe, and you can it access by %CD%\file.txt.
Get %~dp0 from outside and pass it to the exe as a command line parameter.
This can be done by a simple starter bat file that resides in the same directory as your compiled main batch file. This script schould contain the line
YourCompiled.Exe %~dp0% %%*
Your compiled exe then gets its directory from %1. So you cannot pack everything into one exe, but the main portion of it, perhaps that is sufficient for you.
Well, apparently your batch to exe converter simply packs the batch file and extracts it to a temporary directory prior to execution. Very simplistic, hard to get wrong (compared to actually understand the batch file) but it introduces errors such as the one you're describing.
Your best bet is probably to use another batch to exe converter; some of them are actually a little more sophisticated.
Generally, this is not a good idea. firstly, its prone to errors and instability of the converter on different cmd features. secondly, a determined hacker can still decode what you are doing with the batch. My suggestion, if you are so afraid of people looking into your batch,
1) let only the people who are authorized to use your batch to use it
2) give them the correct permissions.
OR, don't use batch at all
1) create a central interface such as a web interface, where all tasks to be done goes through that interface, like using an ATM machine where only buttons are allowed and all the available user options can be done by pushing buttons...etc..
2) authenticate your users through a central authentication system, eg Active Directory, or LDAP or a database.
This is an 2.5 yr old subject but there is an answer to this so I'm posting for anyone else that happens to find this in a search.
B2EC written by Fatih Kodak, has an option to "Submit current directory".
When this is used, you can reference %1 in your batch file to get the path of the EXE that was executed (instead of the path of the extracted BAT that is really being run).
Hovering over that option in the UI shows "Submit the current working directory as the last parameter". The "last parameter" in my use has always been %1 but you can test your code to be sure.
The latest version, 2.1.4 at time of writing, of Bat to Exe by Fatih Kodak creates an Environmental Variable at runtime that can be substituted in place of %~dp0 to reference the Exe's path. Therefore, you can simply replace %-dp0 with %b2eprogrampathname% in the original batch file.
You can use external folders with f2ko's batch to exe converter. Having
a separate folder for subroutines can neaten up a project folder.
To call mysubroutine that is located in mysubroutinesfolder\mysubroutine,
...
pushd mysubroutinesfolder
call mysubroutine
popd
...
The call can be made a one liner:
call xqt mysubroutine
where xqt.cmd is a program that does the call for you:
pushd mysubroutinesfolder
call %*
popd
exit /b
(the %* means "all of the arguments").
In this way your batch programs run as batch, and UNMODIFIED they will
compile with the bat to exe converter, creating a completely folder independent executable. Select "temporary directory",
and include all of the subroutines/executables in your mysubroutines folder
by "selecting them all" with your cursor as usual, then hit "copy".
Be sure to include the xqt.cmd program too; place it "outside" of your mysubroutines folder. Make sure that is is accessible by your main program. Remember to select x64 if you
are runnning on a x64 machine, or the executable will not find SYSTEM32
files. You can find f2k0's batch to exe converter at:
http://www.f2ko.de/programs.php?pid=b2e
Try this development environment for batch scripts, Batch Compiler . It has everything you need to develop a batch program.And compile into stable stand alone executable (Exe).
Friendly user interface.
Debugger, Check your code for syntax errors.
Powerful, versatile compiler.
Allows mouse input in batch files.
Use Windows Common Dialog Boxes.(BrowseFiles,BrowseFolders)
Draw graphics in batch files.
Reverse engineering proof encryption of source code.
Include Company name, Copyright info and Version info.
Make invisible(silent) executables.
Executables with administrator privileges.
Run & debug your script while editing.
Embed resources with executable.(music,images,files)
Advance Commands (BrowseFiles,LaunchSilent,MouseCMD)
Stand-alone executables.No dependencies needed.
Executables are woking on almost all windows operating systems.(98 to 10)
Quick download : http://bc.gotek.info/files/BatchCompiler159.zip
Cheers!
%cd% will give you the current directory:
if not exist "%CD%\file.txt" goto :nofile
Use %CD% instead of %~dp0.
EDIT:
B2EC is not a real converter. Creation location of equipped .cmd file was chosen to be %TEMP% and this is a good choice. Application just lacks 3rd option for working directory of the script - .exe file directory. I advise you to mail the author about adding this one.
Different paths for .exe and created .cmd lead to information loss, i.e. we are unable to know .exe directory and current directory at the same time without providing additional information to the script (e.g. using environment variable or passing it as first/last argument to the script). This script would need to handle it and we would end writing cmd scripts tailored for this converter, which is bad.
%~dp0 - script directory (%TEMP%/.../) - practically useless
%cd% - working directory (as set up in the converter) - currently there are only 2 options: current directory (working directory of .exe) and temporary directory (actually equal to %~dp0, but without trailing backslash)
I think it can be solved by patching cmd.exe instance in memory to change the script path, but that's B2EC developer's duty.
Side note: Normal executable files can be easily executed with specified 0th argument by providing appriopriate lpApplicationName and lpCommandLine to CreateProcess function. Command files are executed via cmd.exe, so 0th argument cannot be set this way.