The Battlestar Galactica here
http://kickasstorrentsan.com/usearch/Battlestar%20Galactica/
can be downloaded with deluge.
Now i scrap the magnet with firebug on the web page.
It can be verified that the magnet is :
magnet:?xt=urn:btih:2D2CAE6AC83800490327547053597BAFF6701C2F&dn=battlestar+galactica+season+1+s01+1080p+bluray+x265+hevc+aac+5+1+joy+utr&tr=udp%3A%2F%2Ftracker.publicbt.com%2Fannounce&tr=udp%3A%2F%2Fglotorrents.pw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.openbittorrent.com%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce
The bash script were written as following:
1.the $url variable is right address for magnet.
2.aria2c command can be executed correctly.
3.aria2c $url has beeen executed for about one hour.Why nothing can be dowlonaded?
This page says, you need to enable DHT option while downloading using magnet-links:-
This official documentation page says, it is enabled by default from version 1.25.0
--enable-dht[=true|false]
Enable IPv4 DHT functionality. It also enables UDP tracker support. If a private flag is set in a torrent, aria2 doesn't use DHT for that download even if true is given. Default: true
Checked the release notes from GitHub, couldn't find the exact release since the flag --enable-dht has been made to true.
Upgrade to the latest version to have the flag enabled by default (or) enable it explicitly if you are using an older version.
aria2c --enable-dht=true "magnet:?xt=urn:btih:2D2CAE6AC83800490327547053597BAFF6701C2F&dn=battlestar+galactica+season+1+s01+1080p+bluray+x265+hevc+aac+5+1+joy+utr&tr=udp%3A%2F%2Ftracker.publicbt.com%2Fannounce&tr=udp%3A%2F%2Fglotorrents.pw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.openbittorrent.com%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce"
Related
During Mediawiki installation I checked the option for SyntaxHighlight, and it created a LocalSettings line,
wfLoadExtension( 'SyntaxHighlight_GeSHi' );
so, I am supposed that it was installed... But no examples for <source lang> tag is running. For instance the example of the Guide page, <syntaxhighlight lang="Python" line='line'> def quickSort(arr): ...</syntaxhighlight> and its variations (with <source> tag) are not working.
How to check if its alive?
How to activate or to complete the installation?
When installed on Linux, GeSHi requires the pygmentize binary to be marked executable (in the {wiki_installed_folder}/extensions/SyntaxHightlight_GeSHi folder) - by default that property might not be set.
Run "chmod +x pygmentize" to mark it executable - make sure to set the other read/write flags appropriately - to avoid any security issues.
I need to configure WireGuard to bring up a VPN on boot on an Embedded Linux device.
My recipe installs a /etc/wireguard/wg0.conf pretty much like the examples found through the Internet.
Then I try to enable the service on SystemD like this on my wireguard.bb:
SYSTEMD_SERVICE = "wg-quick#wg0.service"
SYSTEMD_AUTO_ENABLE = "enable"
But bitbake throws me an error:
ERROR: Function failed: SYSTEMD_SERVICE_my-conf value wg-quick#wg0.service does not exist
I checked the temporary directory and file wg0.conf appears in the correct places but it seems that bitbake's SYSTEMD_SERVICE doesn't know how to expand the "wg0" after # sign.
If I try without the interface name (wg0):
SYSTEMD_SERVICE = "wg-quick#.service"
Bitbake is happy and finalizes my recipe, but it is not what systemd is expecting. Starting a service without an interface makes no sense...
Then I tried another approach and split the "wireguard" package itself from the configuration ("wireguard-conf" package) and added DEPENDS and RDEPENDS on "wireguard".
This got even worse since my wireguard-conf.bb recipe does not contain a "wg-quick#.service" file (it comes from the dependency "wireguard").
Well,
I don't know how to properly fix it and any suggestions will be highly appreciated.
Additional Info
I am using Yocto 2.0.3 in this project (with no hope of updating it).
Thanks to #TomasNovotny comments I managed to compare my "systemd.bbclas" against Github and noticed a change in systemd_populate_packages() that seems to solve the problem.
It works in newer OpenEmbedded (looks like in krogoth, version 2.1 released Apr 2016) and it is introduced by this commit. It works for me in rocko (version 2.4 released Oct 2017). According to j4x's comment, it doesn't work in jethro (version 2.0, Nov 2015).
For older (and currently unsupported OpenEmbeddeds) you can try to backport the patch or handle the symlinks for enabling the service in do_install().
Also please note that SYSTEMD_SERVICE_${PN} variable is package specific, so the _${PN} suffix has to be added (see manual).
I've also tried to enable OpenVPN with my profile (in Yocto rocko) without success.
Finally, I've made it working by providing OpenVPN recipe extension instead of custom one. So, the openvpn_%.bbappend file looks like:
inherit systemd
SYSTEMD_SERVICE_${PN} = "openvpn#clientprofile.service"
SYSTEMD_AUTO_ENABLE = "enable"
do_install_append() {
install -d ${D}${sysconfdir}/openvpn/
ln -sf /data/etc/openvpn/clientprofile.conf ${D}${sysconfdir}/openvpn/clientprofile.conf
}
As you can see, I'm using a symlink to my profile instead of the normal file. You can install a normal OpenVPN profile file instead of making symlink and it also works fine.
Debian's devscripts suite has dch tool which allow to add new version to debian/changelog file.
When I add new version I make this:
package (1.0.2-1myname1-ubuntu0) UNRELEASED; urgency=medium
*
-- signature and date
package (1.0.2-1myname1) unstable; urgency=medium
* old changes
-- signature and date
If version ends on 'ubuntu' it bumped properly (ubuntu1, ubuntu2, etc), and when I use my own suite, it just append 'ubuntu'.
Where dch take sting 'ubuntu' to add to version?
That string is coming from the dpkg-vendor command. You can control it at least with the DEB_VENDOR environment variable, via the DEBCHANGE_VENDOR devscripts configuration option or the dch/debchange command-line --vendor option.
For more information please check the respective man pages.
When running Selenium tests remotely with PHPUnit and Firefox, onChange events are not fired as they are when a user is operating the browser.
The solution to this seems to be to set the focusmanager.testmode option to true in Firefox's preferences (i.e. about:config), as suggested in a Selenium bug report.
However all the examples are using Selenium directly, while I am using PHPUnit which has its own API hiding the Selenium internals. I can't figure out how to set this Firefox option using PHPUnit, so I'm hoping someone else can tell me how this can be done!
(No, I can't go into about:config and set it myself manually because the tests create a new clean browser profile each time the tests are run, so any manual config changes are lost.)
Thanks to the Selenium developers I have a solution!
Short version
Put this in your test so that it gets called in the setUp() function:
// Firefox mini-profile that sets focusmanager.testmode=true in about:config
define('FIREFOX_PROFILE',
'UEsDBAoAAAAAADqAxkSBK46tKgAAACoAAAAIABwAcHJlZnMuanNVVAkAA1BZkVM6WZFTdXgLAAEE
6AMAAARkAAAAdXNlcl9wcmVmKCJmb2N1c21hbmFnZXIudGVzdG1vZGUiLCB0cnVlKTsKUEsBAh4D
CgAAAAAAOoDGRIErjq0qAAAAKgAAAAgAGAAAAAAAAQAAAKSBAAAAAHByZWZzLmpzVVQFAANQWZFT
dXgLAAEE6AMAAARkAAAAUEsFBgAAAAABAAEATgAAAGwAAAAAAA==');
protected function setUp()
{
$this->setDesiredCapabilities(Array('firefox_profile' => FIREFOX_PROFILE));
}
This sets focusmanager.testmode to true.
Long version
You need to create your own mini Firefox profile with the preferences you want set, and pass it along at the start of your tests. Here's how to do it:
Create a new folder and put the files you want in the Firefox profile in there. This can be anything (bookmarks, extensions, a copy of your own profile, etc.) but all we need here is a file called prefs.js which stores our about:config settings.
Create prefs.js in this folder with the following content:
user_pref("focusmanager.testmode", true);
Zip up the folder (prefs.js should be in the root of the archive), and base64 encode it.
If you're using Linux, you can do it all like this:
mkdir firefox-profile
cd firefox-profile
echo 'user_pref("focusmanager.testmode", true);' >> prefs.js
zip -r ../firefox-profile.zip *
base64 < ../firefox-profile.zip
Then take the base64 value and set it as the "firefox_profile" capability as per the short version above.
I'm working through the J primer, and getting stuck when it comes to the load command.
In particular, there are times when the next step in a tutorial is load 'foo' and I'll get an error like the following:
load 'plot'
not found: /users/username/j64-801/addons/graphics/plot/plot.ijs
|file name error: script
| 0!:0 y[4!:55<'y'
When I do ls /users/username/j64/addons/ I only have config and ide in there, so it's sensible that graphics is not found.
My question:
if given an example that says load 'foo', how do I go about finding and installing foo?
I'd recommend simply installing all the JAL packages ("Addons"). There aren't too many, so the download won't take long, and you'll have access to everything you need to run the Labs, Wiki examples, and any code posted by the community (e.g. on the J Forums).
To install all available Addons, type the following into Jconsole (you could theoretically type it into JHS or JQT instead, but since those are distributed as Addons, you might not be able to upgrade them while they're running):
load'pacman' NB. J PACkage MANager
install'all'
The package manager will start running, and you'll see output like:
Updating server catalog...
Installing 52 packages
Downloading base library...
Installing base library...
Downloading api/gl3...
Installing api/gl3...
Downloading api/ncurses...
Installing api/ncurses...
Then stop and restart Jconsole, and run:
load 'pacman'
'update' jpkg 'all'
To make sure all recursive dependencies were satisfied and all packages are up to date (in particular, the base library). Ultimately, you want to see something like:
Updating server catalog...
Local JAL information was last updated: <datetime>
All available packages are installed and up to date.
Then stop & restart J one last time. When that's done, you should have everything you need to run the Labs.
To answer your final question, if you see a line like:
load'foo'
The first thing you should do is run getscripts_j_ 'foo'. In your example:
getscripts_j_ 'plot'
+--------------------------------------------------------------+
|c:/users/user/j64-801/addons/graphics/plot/plot.ijs|
+--------------------------------------------------------------+
Here, you can see the fully-qualified path of where J expects the package to live.
In particular, you can see it where it is relative to the addons directory, which will always be in the form addons/category/module/foo.ijs. The category and module name indicate which addon you need to install, so all you have to do pick the desired entry from the catalog visible in the package manager.