What I have:
1) Oracle 11R1 services on Local system
2) Oracle 12c services on other account
TNS listener run from oracle 11R1 (but also I've create one for 12c)
As a first solution I try
A12c =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 1.1.1.1)(PORT = 1531))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = A12c.1.1.1)
)
)
B11R1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 1.1.1.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = B11R1)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 1.1.1.1)(PORT = 1521))
)
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 1.1.1.1)(PORT = 1531))
)
)
With this configuration I could connect to 11r1 (also on 1531 port !) but nt to 12c. When I setup two listener situation was same. When I run with 12c listener I could not connect to any databases.
Will be grateful for any suggestions.
Thank you
Related
When I try to connect I get error:
I disabled firewall, started the OracleServiceXE, but still get error.
When I use command lsnrctl status, I get:
lsnrctl start:
My tnsnames.ora file looks like that:
# tnsnames.ora Network Configuration File: C:\app\Coi\product\18.0.0\dbhomeXE\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.0)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
)
)
LISTENER_XE =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.8)(PORT = 1521))
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
)
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
)
I created two databases one called test and one that is called archivio. The SID is equals to name. I also created a listener for SID test that responds on port 1521 and one for the SID archivio that should answer on port 1522.
I have verified that the services are active
the first listener works properly. The second, reported to the archivio database, does not work. I perform the test using net manager. The error message is:
the listener is not currently aware of the service requested in connect descriptor
with oracle sql developer i can connect to db archivio if i use local instead of base type connection
Other info:
windows 7 ultimate oracle 12c
LISTNER.ORA
# listener.ora Network Configuration File: C:\Program Files (x86)\Common Files\Quest Shared\instantclient-basic-windows.x64-11.2.0.4.0\listener.ora
# Generated by Oracle configuration tools.
LISTENER1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = webgate1-PC)(PORT = 1522))
)
ADR_BASE_LISTENER1 = C:\app\cirom
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = webgate1-PC)(PORT = 1521))
)
ADR_BASE_LISTENER = C:\app\cirom
ADR_BASE_LISTENER1 = C:\app\cirom
TNSNAMES.ORA
# tnsnames.ora Network Configuration File: C:\Program Files (x86)\Common Files\Quest Shared\instantclient-basic-windows.x64-11.2.0.4.0\tnsnames.ora
# Generated by Oracle configuration tools.
ARCHIVIO =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = webgate1-pc)(PORT = 1522))
)
(CONNECT_DATA =
(SERVICE_NAME = archivio)
)
)
LISTENER_TEST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
)
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
)
)
LISTENER_ARCHIVIO =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
TEST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = webgate1-pc)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = test)
)
)
In order to get an Oracle instance registered on a listener running on not default port (not TCP 1521) you have to configure the LOCAL_LISTENER parameter, for example:
(ADDRESS = (PROTOCOL=TCP)(HOST=hostname)(PORT=1522))
The command is:
alter system set local_listener='(ADDRESS = (PROTOCOL=TCP)(HOST=hostname)(PORT=1522))' scope=both;
Change hostname with you hostname.
Then restart you database or issue the command:
alter system register;
Giovanni
I am trying connect the oracle database using SQL Developer tools but It showing me:
IO ERRORS: Network adapter Could Not Established The Connection
I Started the OracleXETNSListner service from service.msc: it's running.
I also used the lsnrctl start command, which couldn't start the listener either.
And one more thing: I used sqlplus command prompt: it works fine (also gets connected database)
Thanks in advance...
this is my Tnsname.ora file
my tnsname file located at C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN\tnsnames.ora
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = HP-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
)
)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
)
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)
)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
)
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
)
)
I am currently running Oracle 11g on a Windows 2012 Environment.
I recently added another NIC to allow for failover, however I am not sure as to what to do with my listener.ora file and my tnsnames.ora file. Could someone offer guidance? For reference, the current IP I am using is 192.168.0.52 and the IP of the second NIC that I would like to add has the IP of 192.168.0.53.
Below is my listener.ora file:
# listener.ora Network Configuration File: D:\app\Administrator\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\app\Administrator\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\app\Administrator\product\11.2.0\dbhome_1\bin\oraclr11.dll")
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.52)(PORT = 1521))
)
)
ADR_BASE_LISTENER = D:\app\Administrator
Below is my tnsnames.ora file:
# tnsnames.ora Network Configuration File: D:\app\Administrator\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.52)(PORT = 1521))
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
)
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
)
)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.52)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)
)
Thanks for all your help!
Well, you can specify multiple ADDRESS entries in the listener.ora:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.52)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.53)(PORT = 1521))
)
)
And in tnsnames.ora:
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.52)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.53)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)
)
When I specify multiple addresses for listener, it listens on all interfaces listed. And when at least one address in tnsnames can be connected to -- it connects. I have 11g available for testing both on the client-side and on the server-side. I checked the documentation (Multiple Address Lists in tnsnames.ora) and it states that parameter (FAILOVER=on) can be specified in tnsnames.ora explicitly.
I've got some TNS entries formatted as single long lines. Any pretty printers available? Here's an example of what I've currently got.
(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = trac403-vip.pixar.com)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = tmpltest) (INSTANCE_NAME = tmpltest3)))
Here you go :)
(DESCRIPTION =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = trac403-vip.pixar.com)(PORT = 1521)
)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = tmpltest)
(INSTANCE_NAME = tmpltest3)
)
)