1.Service only ran for 0 seconds. Pushing respawn out by 10 seconds
2.LaunchServices: received XPC_ERROR_CONNECTION_INTERRUPTED trying to map database database
launchservices: database mapping failed with result -10822, retrying
I found this two logs related to my Application in console those logs are generated at every 10 seconds.
I search about it but didn’t get proper reason
https://discussions.apple.com/thread/7263229?tstart=0
https://forums.developer.apple.com/thread/16788
Any idea about this logs? Any help would be useful
For 1st warning please check all launch service(lauchchd) commands, And check which command cause this logs. please provide more logs relative to first warning.
(by restart your machine may stop log this warning)
Related
I am just finishing an upload of 8000 assets to candy machine (via the upload command). Everything seemed to be working well when it was creating the bundles and saving them to the cache, but once it started to write the indices I've started seeing these two errors on and off:
1)
Waiting 5 seconds to check Bundlr balance.
Requesting a withdrawal of 0.638239951 SOL from Bundlr...
Successfully withdrew 0.638244951 SOL.
Writing all indices in 719 transactions...
Progress: [█░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░] 2% | 18/719Transaction simulation failed: Blockhash not found
Failed writing indices 3682-3691: Transaction was not confirmed in 60.01 seconds. It is unknown if it succeeded or fail.
I have been searching the internet and from what I can tell these errors are out of my control..is this correct? Or what can I do to get these indices to write successfully? Its at 50% progress right now but I assume the upload is not going to be successful when it finishes. If this is the case, do I need to run the candy machine upload command all over again or is there a way for me to just run the transaction portion (where it started to fail) again? I've seen some notes on retry but it wasn't completely clear to me.
The upload process took about 2.5 hours so would like to avoid that if at all possible.
Help is very much appreciated.
Both errors are common so you dont have to worry about it. You should use a custom RPC (using --rpc-url on the upload command) and wait till the upload command ends. When the upload command ends you have to use verify_upload command in order to see if everything went well (if verify_upload shows an error you have to run upload again and repet till verify_upload shows ready to deploy message).
I’m trying to install eventstore on ubuntu 20.04 but everytime I run evenstored --what-if (as root or as simple user, or as sudo) I get the following error message : Couldn't acquire exclusive lock on DB at '/eventstore/db'..
I tried many things :
I tried ensuring that eventstore user and group were owner of the folder.
reinstalling eventstore
rebooting server
stop process with systemctl stop eventstore and starting it back again
I also tried launching service first (as root / sudo or simple user) before using eventstored --what-if.
I can’t figure out why I keep getting this message as if many instance of eventstore where launched at the same time.
EDIT :
Here is my config file (/etc/eventstore/eventstore.conf)
# Paths
Db: /eventstore/db
Index: /eventstore/index
Log: /eventstore/logs
# Certificates configuration
CertificateFile: /etc/eventstore/certs/cert.crt
CertificatePrivateKeyFile: /etc/eventstore/certs/privkey.key
TrustedRootCertificatesPath: /etc/ssl/certs
CertificateReservedNodeCommonName: "*.mathob-jehanno.com"
# Network configuration
IntIp: 37.187.2.103
ExtIp: 37.187.2.103
IntHostAdvertiseAs: mathob-jehanno.com
ExtHostAdvertiseAs: mathob-jehanno.com
HttpPort: 2113
IntTcpPort: 1112
EnableExternalTcp: false
EnableAtomPubOverHTTP: false
# Projections configuration
RunProjections: None
It happened to me previously. I was running v20 without supplying the necessary settings like the certificates were missing. The server crashed because of this, but the last message you see is this Couldn't acquire exclusive lock on DB at '/eventstore/db'. You might look close and see if it's a warning, and the real reason for the crash is mentioned earlier in the stack trace of the original error.
Ok so
First of all, comments helped a lot :
this error message is following another one which give more detail about what the problem is.
One thing to know is that eventstored --what-if is supposed to be run while service is not running so user need to stop the service before (systemctl stop eventstore).
I then changed the path to db, index and logs file to match the default value (it prevented me some permissions error).
Recently, I've been having issues with My Executions having delays in adding the execution entries.
The app script on the Google Sheet will run successfully (based on output), but there is no entry in the execution logs or the entry is delayed (10+ minutes).
More worrisome, today I received an automatically generated email with a script error:
"We're sorry, a server error occurred. Please wait a bit and try again."
But there was no corresponding entry in executions.
I've tried checking View/Stackdriver Logging, View/Stackdriver Error Reporting - which both go to the Apps Script Dashboard. And I've played with the filters, but the errors do not appear.
I have a problem that's been plaguing me about a year now. I have Oracle 12.1.x.x installed on my machine. After a day or two the listener stops responding and the listener.log contains a bunch of TNS-12531 messages. If I reboot, the problem goes away and I'm fine for another day or two. I'm lazy and I hate rebooting, so I decided to finally track this down, but I'm having no luck. Since the alternative is to do work that I really don't want to do, I'm going to spend all my time researching this.
Some notes:
Windows 10 Pro
64-Bit
32 GB RAM
Generally, about 20GB free when the error occurs
I have several databases and it doesn't matter which DB is running
Restarting the DB doesn't help
Restarting the listener doesn't help
Only rebooting clears the problem
When I set TRACE_LEVEL_LISTENER = 16, I don't get much more info. Trace files are not written to
I can connect to the DB if I bypass the listener (ie, set ORACLE_SID=xxx and connect without a DB identifier)
All other network interactions seem to work fine after the listener stops
lsnrctl status hangs and adds another TNS-12531 to the listener.log
I have roughly the same config at home and this does not happen
Below is an example of a listener.log file:
Fri Jul 28 14:21:47 2017
System parameter file is D:\app\user\product\12.1.0\dbhome_1\network\admin\listener.ora
Log messages written to D:\app\user\diag\tnslsnr\LJ-Quad\listener\alert\log.xml
Trace information written to D:\app\user\diag\tnslsnr\LJ-Quad\listener\trace\ora_24288_14976.trc
Trace level is currently 16
Started with pid=24288
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=LJ-Quad)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
28-JUL-2017 14:22:06 * 12531
TNS-12531: TNS:cannot allocate memory
28-JUL-2017 14:22:47 * 12531
TNS-12531: TNS:cannot allocate memory
28-JUL-2017 14:26:24 * 12531
TNS-12531: TNS:cannot allocate memory
Thanks a bunch for any help you can provide!
Issue 1
This error can occur approximately after 2048 connections have been made via the listener when running on a non-English Windows installation.
Fix for Issue 1
Create a Windows User Group named Administrators on the computer where the listener.exe resides. This can fix the issue of the listener dying.
Reference: I'll post the link for the first issue as soon as I find it again
Issue 2
This error can also occur on Windows 64-Bit systems where the Desktop Application Heap is too small.
Fix for Issue 2
Try to Increase the Desktop Application Heap Registry in windows its located in
HKLM\System\CurrentControlSet\Control\Session Manager\SubSystems\Windows
Just as note don't add this Value by yourself, you have to depend on document.
Basically search for the registry entry and alter the third value for the key SharedSection=1024,20480,1024. This is a trial and error approach, but seems to improve listener's stability and memory issues.
Reference: TNS:cannot allocate memory - is there limit to the num databases on one box (Oracle Developer Community)
I get this error sometimes when trying to save things to Parse or to fetch data from it.
This is not constant and appear once in a while making the operation to fail.
I have contacted Parse for that. Here is their answer:
Starting on 4/28/2016, apps that have not migrated their database may see a "428" error code if the request cannot be handled by the remaining shared pool of resources. If you see this error in your logs, we highly recommend migrating the database for your app without delay.
Means this happens because of starting this date all apps are on low priority but those who started DB migration. So, Migration of the DB should resolve that.