I have followed the steps in the url but I'm getting the following error when I run the installService.bat file. Please help me to get this db up and running.
F:\orientdb-community-2.2.4\service>installService.bat C:\Program
Files (x86)\Ja va\jdk1.8.0_92\jre\bin\server\jvm.dll
F:\sysnet\openempi\openempi-entity-3.1.0 The system cannot find the
path specified. Unable to create logger at ''
does OrientDB 2.2.4 run successfully for you in its stand-alone server mode using server.bat?
Related
I am trying to install Oracle 19c on windows 11 but getting the below error.
[INS-13001] Oracle Database is not supported on this operating system. Installer will not perform prerequisite checks on the system.
I have performed the below task to resolve the issue but couldn't get through.
1.I extracted the installation folder to a different location and tried installation.
2.I tried to run the setup.exe file and setup application as administrator.
3.If I am skipping this error message(1_err.png), I am getting another error(2_err.png).
4.Stopping the OracleRemExecServiceV2 service and again tried installing it.
I have attached the error snapshot for the same i.e 1_err.png and 2_err.png
I am learning something about ElasticSearch Stack and I am having a problem installing Logstash on Windows 10 (windows 10 enterprise N OS build 15063.674).
I installed ElasticSearch and Kibana and these are up and running.
I followed the steps on this page to install Logstash:
Step 1: Download and unzip Logstash
downloaded "logstash-5.6.3.zip" file and unzipped it to: "c:\program files\elastic\"
Step 2: Prepare a logstash.conf config file
as described here, I created a "logstash-simple.conf" in the "c:\program files\elastic\logstash-5.6.3>" folder
Step 3: Run bin/logstash -f logstash.conf
at this point I am having the issue (I tried using both cmd and PowerShell with elevated privileges): the result is:
The system cannot find the path specified.
"could not find jruby in C:\Program Files\Elastic\logstash-5.6.3\vendor\jruby"
Of course, the "vendor" folder exists, and there is a "jruby.bat" file inside. I searched the web and I found something about the JRUBY_BIN environment variable but event after the creation (and the additional reboot) the issue still is there.
Can someone address me to the problem?
I have found this solution: https://discuss.elastic.co/t/logstash-does-not-start-says-could-not-find-jruby-in/113500.
You can also try move logstash folder out of program files direct to C, it might help.
I need help resolving this error.
java.lang.UnsatisfiedLinkError: no jp_co_epson_upos_firm_FirmNativeAccess_1_14_0001 in java.library.path
I want to use EpsonJavaPOS for printing.
Following are the steps I've succeeded so far.
Tried to install JavaPOS in windows 10(64 bit), But was partially successful
and hence copied the installation folder in windows 7 to windows 10.
I've configured the printer in setupPOS.exe application.
And as a next step I'm trying to run checkup health from checkuphealth.bat file
But receiving the above mentioned exception.
If I try to use the System.setProperty(JposPropertiesConst.JPOS_POPULATOR_FILE_PROP_NAME, "/path of jpos.xml");
as solution to the above mentioned exception, It's throwing null pointer exception.
Can anyone help on these issues?
Your process can't find the file "jp_co_epson_upos_firm_firmnativeaccess.dll"
One solution is to add the folder containing the file to the Windows PATH environment variable.
I found this file in my prior version of Java:
C:\Program Files\Java\jdk1.7.0_80\jre\bin
It was not installed in my Java 8 jre when I reinstalled the ADK driver after adding Java 8 to my system.
I have added it as a library in my application and it resolved this issue.
I'm installing sonarqube on Windows Server 2012.
I have followed the following steps:
Downloaded sonarqube4.4 and extracted to C:\Sonarqube
Downloaded Java JDK 1.7.0_60 and jre 1.7.0_67 as well as jre7
Installed Windows SDK 7 and .NET Framework 4
Navigated to C:\sonar\bin\windows x86-64 and ran StartSonar.bat as an administrator, this ran ok with no output and Ihad to hot ctrl- Z to break
I then ran \windows-x86-64\InstallNTService.bat as an administrator and I am seeing the sonarQube services was launched, but failed to start.
Not sure what the problem is.
I believe you first ran \windows-x86-64\InstallNTService.bat successfully and then StartSonar.bat unsuccessfully (the inverse order of what you describe).
You probably have [this problem]: http://qualilogy.com/fr/wp-content/uploads/sites/2/2013/09/Sonar_ServiceLaunchError2.jpg
Windows could not start the Sonar service on Local Computer.
Error 1067: The process terminated unexpectedly.
In that case, the solution is to change the user/rights to launch the Sonar service: https://qualilogy.com/en/migrate-sonarqube-tomcat-to-windows-service/
Go to the Services window, find the Sonar service, and open the Properties windows to change the user it logs on as to one with sufficient permissions.
I was able to solve this problem by creating a new folder named “Temp” in C:\Windows\System32\config\systemprofile\AppData\Local\
The Log-File will show only
--> Wrapper Started as Service
Cleaning or creating >temp directory C:\Program Files (x86)\SonarQube\sonarqube\temp
<-- Wrapper Stopped
The SonarQube service was launched, but failed to start.
After a long search, I came up to this site http://zen-and-art-of-programming.blogspot.de/2013/03/installing-and-running-sonar-source.html.
Solution:
Navigate to C:\Windows\system32\config\systemprofile\AppData\Local\ and create the directory Temp
2: Set the user rights to full access
3: Run the StartNTService.bat
I am trying to run the JDeveloper Integrated Weblogic server (11.1.1.5) on Windows 7 x64 and keep running into this error from within JDeveloper:
[Starting Server Instance IntegratedWebLogicServer]
#### Server Instance IntegratedWebLogicServer could not be started: Error starting Server Instance.
I found this in the createDefaultDomain.log file:
Log File: C:\Users\mologan\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\o.j2ee.adrs\CreateDefaultDomain.log
Label: JDEVADF_11.1.1.5.0_GENERIC_110409.0025.6013
Product Home: C:\Oracle\Middleware\jdeveloper\jdev\
Domain: C:\Users\mologan\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain
"C:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd" "C:\Users\mologan\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\o.j2ee.adrs\CreateDefaultDomain.py"
Process started
Elapsed time: 94 ms
When I try to run this command from the command line I get the following:
C:\Users\mologan>"C:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd" "C:\Users\mologan\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\o.j2ee.adrs\CreateDefaultDomain.py"
CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jrf_11.1.1/jrf-wlstman.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-SH~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADFSCR~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\IGFWLS~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OVDWLS~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-wlst.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\Oracle\Middleware\jdk160_24\;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files\ThinkPad\Bluetooth Software\;C:\Program Files\ThinkPad\Bluetooth Software\syswow64;C:\Program Files\Broadcom\WHL\;C:\Program Files\Broadcom\WHL\syswow64;C:\Program Files\Broadcom\WHL\SysWow64\;C:\Program Files\Broadcom\WHL\SysWow64\syswow64;C:\Program Files\TortoiseSVN\bin;C:\ant\\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8 Your environment has been set.
CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jrf_11.1.1/jrf-wlstman.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-SH~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADFSCR~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\IGFWLS~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OVDWLS~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-wlst.jar;C:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbynet.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbytools.jar;;
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Error: ADRS_DOMAIN_PASSWORD environment variable not set.
Exiting WebLogic Scripting Tool.
C:\Users\mologan>
Has anyone seen this type of error before? I have no idea how to fix it and its getting really frustrating. All help is much appreciated!
Cheers,
Morris
Open CreateDefaultDomain.py file and set ADRS_DOMAIN_PASSWORD.
import os
os.putenv('ADRS_DOMAIN_PASSWORD', 'welcome1')
if not 'ADRS_DOMAIN_PASSWORD' in os.environ:
print("Error: ADRS_DOMAIN_PASSWORD environment variable not set.")
exit()
I found this answer:
Domain creation fails after installing on new Windows version (7338577, 7339920, 8654914)
When JDeveloper is installed on a newly released Windows version, it is possible that Jython, which is used by Oracle WebLogic Server's script tool, does not recognize the Windows version and instead assumes that it is running in a Linux environment.
This causes domain creation to fail with the following error in CreateDefaultDomain.log:
wlst > Failed to get environment, environ will be empty: (0, 'Failed to /
execute command ([\'sh\', \'-c\', \'env\']): java.io.IOException: Cannot run /
program "sh": CreateProcess error=2, The system cannot find the file /
specified')/
# wlst > Error: ADRS_DOMAIN_PASSWORD environment variable not set.
The workaround is to obtain a patch for jython-modules.jar, or to run on a supported version of Windows.
Original source:
http://www.oracle.com/technetwork/developer-tools/jdev/knownissues-097654.html#dep1
I'm using JDeveloper 12.2.1.3.0.
Have the same problem, and all I had to to is exit the JDeploper, kill the Java process in the Task Manager, and restarting JDev again.