I am running and supporting a PowerBuilder 11.2 application running in windows 7 64bit environment. The previous version of this program ran without a problem, and 99% of this new program runs without a problem. However, when I run a specific bit of functionality, at times the program throws an exception "Sybase PowerBuilder 11.0 has stopped working" Problem event name APPCRASH Application Name PB110.EXE, Fault Module Name PBSHR110.dll, Exception code c0000005 in the dev environment. In the compiled version running on the client machine the error "A breakpoint in an application indicates a program error. After this dialog is dismissed, the application will continue to run, but it may be in an unstable state" and the program closes
There are shared PBL files throughout this whole application. It is a framework that supports 6 MDI programs. I have performed a full build on the main objects and it compiles without error. The other programs that in the framework that use these common objects to not have this problem. I have tried to step through the code doing a debug, but when I step through the code, it does not crash.
I have re-installed PB 11.0 and the PB 11.2 upgrade again and of course rebooted numerous times. I am at a loss here. I have tried everything that worked before and have spent over a week trying to find something online, so I am now appealing to the group. Any help at all will be so very much appreciated. Until then, I'll keep trying.
Thanks.
John
It could be that PB 11.2 is not listed as being supported on Windows 7. A lot of times you can get lucky, and most applications will still work on unsupported OS's. Yet, an update may be released that breaks something. You may want to try downloading the latest release of PB which is 12.6 and migrate a copy of your application to that version. You will at least be able to rule out if that is the issue or not.
Enclosed is Sybase PowerBuilder Enterprise version 11.2, which is
compatible with the following platform and operating system
configurations:
Microsoft Windows XP with Service Pack 2
Microsoft Windows XP Tablet PC Edition with Service Pack 2
Microsoft Windows Server 2003 with Service Pack 1
Microsoft Windows Vista Business Edition
PowerBuilder 11.2 builds 32-bit applications, but supports deployed
applications in both 32-bit and 64-bit environments on the Vista
operating system. For more information about using PowerBuilder on the
Vista operating system, see “Vista Support” in the online Help. For a
list of issues that have been found on the Vista operating system, see
“Vista issues”.
Microsoft Windows 2000 with Service Pack 4 is supported for deployment
only. All support for this platform will be discontinued in future
releases of PowerBuilder.
Related
I'm developing and compiling on a Windows 10 64-bit machine. We've discovered an issue that seems to be related to machines running 32-bit machines. If I compile the most current code from a 32-bit machine, the issue goes away.
I'd rather not have to develop on one machine and compile from another if I don't have to. I'd rather not set up a VirtualMachine running a 32-bit version of Windows, just to compile, if I don't have to. So, how are people in the "real world" handling this? I'm using Visual Basic 6 (I know, I know. But "Just upgrade to .NET" is not the answer I'm looking for. I'm working on it. It will take some time. A lot of time.).
Microsoft no longer supports VB6 development and support from Microsoft has already stopped. But VB6 applications still run on Windows 8.1. See also this article titled "Support Statement for Visual Basic 6.0 on Windows Vista, Windows Server 2008, Windows 7, Windows 8 and Windows 8.1".
When would a VB6 application stop running on Windows? Is there any official statement from Microsoft or any clue about the same?
EDIT:
In this link, the Visual Studio team has mentioned that, "It will be supported at least through 2024". But it's not clear whether they said it's supported in Windows 8 till 2024 or in future release of windows OS too.
The "2024" means as part of Windows 8. The link says the VB6 runtime is part of Windows and therefore will be supported in the same way as the rest of Windows. For example Windows 8 will be supported until 2024 because that's the support lifecycle for Windows 8.
EDIT: Microsoft have now said the VB6 runtime is officially part of Windows 10 too.
EDIT: the VB6 IDE (not runtime) is no longer officially supported on any version of Windows, but there are ways to get it to work on Windows 7 and 8.
Uservoice: The VB6 runtime it is still a component of the Windows operating
system and is a component shipped in Windows 8.1. It will be supported
at least through 2024
It seems clear they mean VB6 will be supported through 2024, not just VB6 on Windows 8 (whose mainstream support ends 6 years earlier anyway).
The VB6 programming language installs and runs on Windows 7, 8.x and 10.
There is a utility to install it here: VB6 IDE install utility
It is in Microsoft's interests for VB6 applications to run in Windows 10 and so they probably will. The same is probably true of most old application frameworks: Microsoft works hard to maintain compatibility. The IDE runs on Windows 7 (not sure about 8 or 10).
However, just because Microsoft says VB6 will run it doesn't mean your particular application will work, particularly if you use third party components. You should at least be thinking about migrating to another development environment.
From what I heard, VB6 applications still work on Windows 10 technical preview. I've seen no official statement yet, but it would seem that VB6 will stay supported for at least a few years.
Microsoft have just stated for VB6 programming on Windows 10:-
"Windows is committed to compatibility. The Windows compatibility team
has been looking at user telemetry and reacting to feedback from
Windows Insiders to ensure that existing apps work well with Windows
10. Windows 10 is designed to run Windows 8.1 and Windows Phone 8.1 software programs. And yes, everyone’s favorite VB6 Runtime will
continue to work, too. In the near future, the compat team will go
more in-depth on this topic on Blogging Windows."
Everyone's favorite VB6 programming on Windows 10
So VB6 programming will work on Windows 10, as does VBA programming.
They also state that 'Project Centennial' Universal Windows Platform Bridge will work with VB6 code.
Instructions for installing the VB6 IDE are available here...
In my personal experience if you build a dll in VB6 and add it as a component to COM Plus in Server 2016 it just won't add. You will get an error such as the following, even for a 'Hello World' component.
A registry value was changed while installing the following component
into a COM+ Application. If you are experiencing activation problems
with this component then please check the registry value for the
following key.
Component: C:\temp\Project1.dll
Registry Key:
CLSID\{D5DE8D20-5BB8-11D1-A1E3-00A0C90F2731}\InProcServer32
Process Name: RunDll32.exe Comsvcs.dll file version: not loaded
There is a project to provide a new language "RADBasic" which is intended to be compatible with the VB6 programming language.
New language compatible with VB6 programming
Looks like Microsoft just extended VB6 runtime support out to Windows 11 and Server 2022. No such luck for the IDE though.
Read more from Microsoft here:
https://learn.microsoft.com/en-us/previous-versions/visualstudio/visual-basic-6/visual-basic-6-support-policy
I have been trying to install and run a program written in vb 6.0 on windows 7. It was working fine installing and running in windows xp. The error message after installing and running it say that
Run-time error 339" : Component voice.ocx or one of its dependencies not correctly registered: a file is missing or invalid.
This program has voice recording things.
I manually register that ocx component but still error that shown like
The module "voice.ocx" failed to load.
And I try to install VB run-time and still shows the same error. I believe that Windows 7 support vb 6.0 programs.
One thing here I am not sure of is that the ocx component I have is whether 16 or 32 bit version. I don't think we cannot register 16 bit version ocx in windows 7.
And I also try to install and run in compatibility mode or even as administrator. I think it is a platform related issue? And it might be some other work-around. So, I appreciate your hints or clues on this program runnable in windows 7.
Thanks in advance.
Regards,
SEE
Just encase anyone else sees this.. here is what I did
I knew the program was running on Windows XP, with visual basic installed. I had only been given the exe and the MDB. So I created a virtual machine (stick with me) of Windows XP, installed visual basic and test the app. It was fine. Then I downloaded a dependency tool called Dependency Walker from http://www.dependencywalker.com/. I installed this in the virtual machine and asked it to open my exe.
Once this was loaded I ignored the warnings and asked it to start profiling. I ran the app, stepped through everything I could see, then exited the application. This left me with a log of the DLLs that had been accessed. Slowly I went through these checking if they existed on my windows 7 setup, when one was missing I copied it to my application directory and then from an elevated command prompt run "regsrv32 [missing_name.dll]" until there were no files which my windows 7 desktop didn't have.
the application then worked fine! This may not work all the time, because of the way third party OCX's or DLLs have been written. But it may help someone out.
Few of old Win32 components are not supported in Windows 7. There are possibilities of failure of a VB Program in Windows 7.
But there are some possible ways to fix those.
Check the following links to avail the same.
http://www.personalcomputerfixes.com/general-errors/how-to-successfully-fix-the-339-runtime-error/
http://social.msdn.microsoft.com/Forums/en-US/vbpowerpacks/thread/8cb5ab97-8407-4e49-8db6-30dcef87cbd1/
http://yang.articlesbase.com/operating-systems-articles/simple-solutions-on-how-to-fix-runtime-error-339-1830111.html
I have developed several programs with VB5 on a WinXP32 machines and then installed them on Windows 7 (32 and 64) PCs without problems.
This applications use different OCXs (16 and 32 bit version) and till now I never get problem with them. Thus I do not think that the VB5 or Vb6 could have any issue on Windows 7 machines.
On the other hand I would point out the module "voice.ocx" and investigate if it can run on a windows 7 pc, because as Katturaja sais some old ocx have problem on win7. To do that, I would create a simply VB6 project that uses voice.ocx (just an Hallo-World"), then create the installation pack and finally try to install on a clean win7 machine (for example a virtual machine). In this way you could isolate the problem.
I hope this could help you.
Using C++ Builder under Rad Studio XE I have created a simple Datasnap server service from scratch. I wanted to test the service installation process before adding any functionality, and found that while it will install successfully on a range of Windows machines, I haven't been able to get it to Start under a clean installation of Windows 7 x64.
The error message trying to start the service is: Windows could not start the service on Local Computer. Error 2: The system cannot find the specified file.
I have turned off both dynamic linking and run-time libraries. It starts fine under Windows XP and 2003 operating systems, just not this single Win7 machine that I have. I have opened the firewall for the specified ports, and confirmed no other app is using them as well. The service was installed under Administrator, and logs on as Local System account.
Is there a problem with a C++ Builder compiled service under Windows 7, or maybe 64 bit? Hopefully someone can point me in the right direction so I don't have to bang my head against the wall too many more time.
Thanks!
Since C++ Builder creates 32bit applications only, make sure you install the service in the c:\Windows\SysWOW64 folder on 64bit Win7 systems. Windows 7 x64 expects to find only 64bit files/services in the system32 folder.
VS6 popped off a series of errors before bombing out completely during install on Windows 7. I specifically need to get VB6 functioning on Windows 7. Anyone having any luck?
Folks on the VB6 newsgroup report they have managed to get it working on Windows 7.
There's this step-by-step guide on how to install the IDE on Windows 7 (including 64 bit).
If that doesn't work (scrapes barrel) try this old tip about persuading the install not to install the Java VM? Link is now broken so here is the tip:
Before trying to install VB6. Create a new file, name it msjava.dll and place it in your windows directory. The file can be zero length. You can then happily install without the prompt to install an old version of Microsoft's flavour of Java. Once you have installed VB6, delete the msjava.dll otherwise windows update will prompt you to update it.
Or (scrapes hole in barrel) these tips from an article about getting the IDE working on Vista?
Footnote: if developing with ADO, be aware of this.
The only way I've found that works is Windows XP mode (i.e. a virtual machine). Works fine there, but otherwise, not at all.
I found ALL the answers in a thread at vbmonster.com. As mentioned above, you CAN install Visual Studio 6 with Service Pack 6 under Windows 7 by following Derek's detailed instructions at fortypoundhead.com.
I had a problem because I needed to install Service Pack 5. I use a third party program that does not work with Service Pack 6. A really smart programmer (GuideX) came up with a great hack to get around the MDAC 2.5 error.
Win 7 64 bit service pack 5 & 6. Turn compatability off and it seems to work.
Recently I had to debug an ancient application written in Visual C++ 6.0 on Windows 8.1. Tried different solutions all of them failed, only this one worked.
This guys made a special installer that allows installing VC++6, VB6, and SP6 on Windows Vista/7/8/8.1/10 without any errors whatsoever.
Hope it would be helpful to someone.
I installed VB6 on Windows 7 Pro without having to use compatibility settings or run as administrator.
Doesn't really help you, but does show that it can work.
Several people in my office have installed Visual Studio 6 (without VC++) on Windows 7, both 32-bit and 64-bit with no problems. The one thing we have in common: we've all turned UAC down to it's lowest setting. Nothing else special required.
I am using vb6 on windows 7 32 bit system for a long time.
you will need to install your vb6 with compatibility of xp2.
Create a 0-byte file in the C:\Windows directory called msjava.dll.
Don't just install via the Autorun executable; instead browse the Visual Studio 6 CD (or folder), right-click Setup.exe and select Run As Administrator.
On any Program Compatibility Assistant warnings, click Run Program.
Step through the setup screens until you're able to choose Custom Setup, then click next.
On the setup options, install the following items and nothing else:
Microsoft Visual Basic 6.0
ActiveX
Data Access
Graphics
Click continue and the process will start, and (hopefully) eventually complete.
Skip the installations of the MSDN CD, BackOffice, VSS and SNA Server, and clear the checkbox for "Register Now". Setup should be complete.
Download the VB6 Service Pack 6 from http://www.microsoft.com/downloads/en/confirmation.aspx?FamilyID=A8494EDB-2E89-4676-A16A-5C5477CB9713&displaylang=en and install.
Change the compatibility settings for Visual Basic (to get it to run a little more smoothly under Windows 7) by browsing to C:\Program Files\Microsoft Visual Studio\VB98, right-clicking the VB6.exe file, and selecting properties.
On the Compatibility tab, check the following:
Run this program in compatibility mode for Windows XP (Service Pack 3)
Disable Visual Themes
Disable Desktop Composition
Disable display scaling on high DPI settings
When you start up the IDE, you may get a notification saying that the color scheme has been changed to Windows 7 Basic, but it will be changed back to Aero once you exit. Everything should be working fine at this point!
Note: when you first run your new install vb6 run it with admin rights and with xp2 compatibility so that your exe can run on any system.
The word "supported" is used loosely in this thread, potentially leading the unwary reader to the conclusion that Microsoft supports the VB6 IDE (that is, the integrated development environment) on operating systems beyond Windows XP. This fact clearly is stated in the table that appears on the page at this link:
https://blogs.msdn.microsoft.com/nikosan/2012/04/20/support-statement-for-visual-basic-6-0-on-windows-8-updated/
Note that executables developed using VB6 are in fact compatible with Windows OS's from Windows XP through Windows 10--32/64-bit versions:
https://blogs.windows.com/buildingapps/2015/06/22/getting-ready-for-windows-10-sdks-compatibility-bridges/
Anyone using non-standard methods to coax the IDE into working on OS's that Microsoft does not support is exposing themselves/their organizations/their employers to risk and is not suitable for risk-averse organizations.
Having said that, I think the purest solution is to install Windows XP onto a virtual machine and run that VM in a modern host OS, such as Windows 10. That works just fine, and you can install directly from the VB6 Setup disc without making any pre-install/post-install customizations.
I had a Vista x64 box with a working copy of the VB6 IDE (which was supported). I upgraded the OS to Windows 7 x64 and the VB6 IDE still works fine. You could try that. I know, a huge PITA and kludgy but still, it worked for me.
I run Windows 7 Ultimate 32-bit, installed Windows Virtual PC - XP Mode, and that solved my problem isince I can run MSDEV 6.0 in the XP Window.
Not esay to install XP Mode though, the MS site is buggy.
The VB6 programming language is supported on the Windows 10 Technical Preview.
Visual Vasic 6 applications run and the VB6 IDE installs and works too.
I have the VB6 IDE running OK on Win-XP-16, Win-7-32, Win-7-64, Win-8.1-32, Win-8.1-64, win-10-32 and win-10-64 by using the instructions above which basically say, turn off UAC, run the installer AS ADMIN, and then set the VB6.exe file to run in XP-SP3 Compatibility mode.
I have had some issues with it and have had to do a bit more googling to solve these but I don't remember any more what those issues or solutions were.
I've even got the VB3 IDE running on the 32-bit versions of XP, Win-7, Win 8.1 and Win-10 - without even installing them - just copied the C:\VB folder from another computer and copied the *.LIC license files and *.VBX etc files as well.
I have successfully installed vb6 on win 7 32 bit by installing xp first then installing new win 7, (not upgrade), and do not format. then it will install vb6 without a problem
It's depending on your build version of Windows 7.
If your Win7's version is lower or is not updated, it has MANY PROBLEMS with compatibility.
But mine is newer Win7 version and has NO COMPATIBILITY TROUBLE.
I am currently using VB6 , VS6 and they still work fine!
If Properties->Compatibility->Windows XP doesn't help, fix it with UPDATING your Win7.