$ curl localhost:9200/_cat/health?v
epoch timestamp cluster status node.total node.data shards pri relo init unassign pending_tasks max_task_wait_time active_shards_percent
1469016273 12:04:33 jh-cluster green 1 1 0 0 0 0 0 0 - 100.0%
$ curl localhost:9201/_cat/health?v
epoch timestamp cluster status node.total node.data shards pri relo init unassign pending_tasks max_task_wait_time active_shards_percent
1469016277 12:04:37 jh-cluster green 1 1 0 0 0 0 0 0 - 100.0%
I don't know why this situation. Nodes's config file is same,
paste your elastic configuration, btw this is my configuration for cluster in local (1 master-for-write 1 slave-for-read):
master node:
cluster.name: musement
network.bind_host: 0.0.0.0
transport.tcp.port: 9301
http.port: 9201
node.master: true
node.data: false
discovery.zen.minimum_master_nodes: 1
discovery.zen.ping.timeout: 3s
discovery.zen.ping.multicast.enabled: false
discovery.zen.ping.unicast.hosts: ["pippo.int:9300"]
slave node:
cluster.name: musement
network.bind_host: 0.0.0.0
transport.tcp.port: 9300
http.port: 9200
discovery.zen.minimum_master_nodes: 1
discovery.zen.ping.timeout: 3s
discovery.zen.ping.multicast.enabled: false
discovery.zen.ping.unicast.hosts: ["pippo.int:9301"]
where pippo.int it's the eth0 of my pc
Related
Now I have two nodes(192.168.72.129, 192.168.72.130)
It's the setting in config/elasticsearch.yml
======node-1======
cluster.name: cluster-es
node.name: node-1
network.host: 0.0.0.0
node.master: true
node.data: true
http.port: 9200
http.cors.allow-origin: "*"
http.cors.enabled: true
transport.port: 9300
http.max_content_length: 200mb
cluster.initial_master_nodes: ["node-1"]
discovery.seed_hosts: ["192.168.72.129","192.168.72.130"]
gateway.recover_after_nodes: 2
network.tcp.keep_alive: true
network.tcp.no_delay: true
transport.tcp.compress: true
cluster.routing.allocation.cluster_concurrent_rebalance: 16
cluster.routing.allocation.node_concurrent_recoveries: 16
cluster.routing.allocation.node_initial_primaries_recoveries: 16
======node-2======
cluster.name: cluster-es
node.name: node-2
network.host: 0.0.0.0
node.master: true
node.data: true
http.port: 9200
http.cors.allow-origin: "*"
http.cors.enabled: true
transport.port: 9300
http.max_content_length: 200mb
cluster.initial_master_nodes: ["node-1"]
discovery.seed_hosts: ["192.168.72.129","192.168.72.130"]
gateway.recover_after_nodes: 2
network.tcp.keep_alive: true
network.tcp.no_delay: true
transport.tcp.compress: true
cluster.routing.allocation.cluster_concurrent_rebalance: 16
cluster.routing.allocation.node_concurrent_recoveries: 16
cluster.routing.allocation.node_initial_primaries_recoveries: 16
but when I curl http://192.168.72.129:9200/_cat/nodes
there is only one node to show, how can I solve it?
Used this guide for SSL certs creation
I'm trying to connect to remote Elasticsearch cluster. Both clusters are using SSL certificates (signed by same CA), is it possible ?
Local cluster:
cluster.name: client1
searchguard.enterprise_modules_enabled: false
node.name: ekl.test.com
node.master: true
node.data: true
node.ingest: true
network.host: 0.0.0.0
#http.host: 0.0.0.0
network.publish_host: ["ekl1.test1.com","ekl.test.com"]
http.port: 9200
discovery.zen.ping.unicast.hosts: ["ekl.test.com", "ekl2.test2.com"]
discovery.zen.minimum_master_nodes: 1
xpack.security.enabled: false
searchguard.ssl.transport.pemcert_filepath: '/etc/elasticsearch/ssl/node1.pem'
searchguard.ssl.transport.pemkey_filepath: 'ssl/node1.key'
searchguard.ssl.transport.pemtrustedcas_filepath: '/etc/elasticsearch/ssl/root-ca.pem'
searchguard.ssl.transport.enforce_hostname_verification: false
searchguard.ssl.transport.resolve_hostname: false
searchguard.ssl.http.enabled: true
searchguard.ssl.http.pemcert_filepath: '/etc/elasticsearch/ssl/node1_http.pem'
searchguard.ssl.http.pemkey_filepath: '/etc/elasticsearch/ssl/node1_http.key'
searchguard.ssl.http.pemtrustedcas_filepath: '/etc/elasticsearch/ssl/root-ca.pem'
searchguard.nodes_dn:
- CN=ekl.test.com,OU=Ops,O=BugBear BG\, Ltd.,DC=BugBear,DC=com
- CN=ekl1.test1.com,OU=Ops,O=BugBear BG\, Ltd.,DC=BugBear,DC=com
searchguard.authcz.admin_dn:
- CN=admin.test.com,OU=Ops,O=BugBear Com\, Inc.,DC=example,DC=com
Remote cluster:
cluster.name: client2
searchguard.enterprise_modules_enabled: false
node.name: ekl1.test.com
node.master: false
node.data: true
node.ingest: false
network.host: 0.0.0.0
#http.host: 0.0.0.0
network.publish_host: ["ekl.test.com","ekl1.test1.com"]
http.port: 9200
discovery.zen.ping.unicast.hosts: ["ekl6.test1.com", "ekl1.test1.com"]
discovery.zen.minimum_master_nodes: 1
xpack.security.enabled: false
searchguard.ssl.transport.pemcert_filepath: '/etc/elasticsearch/ssl/node2.pem'
searchguard.ssl.transport.pemkey_filepath: 'ssl/node2.key'
searchguard.ssl.transport.pemtrustedcas_filepath: '/etc/elasticsearch/ssl/root-ca.pem'
searchguard.ssl.transport.enforce_hostname_verification: false
searchguard.ssl.transport.resolve_hostname: false
searchguard.ssl.http.enabled: true
searchguard.ssl.http.pemcert_filepath: '/etc/elasticsearch/ssl/node2_http.pem'
searchguard.ssl.http.pemkey_filepath: '/etc/elasticsearch/ssl/node2_http.key'
searchguard.ssl.http.pemtrustedcas_filepath: '/etc/elasticsearch/ssl/root-ca.pem'
searchguard.nodes_dn:
- CN=ekl.test.com,OU=Ops,O=BugBear BG\, Ltd.,DC=BugBear,DC=com
- CN=ekl1.test1.com,OU=Ops,O=BugBear BG\, Ltd.,DC=BugBear,DC=com
searchguard.authcz.admin_dn:
- CN=admin.test.com,OU=Ops,O=BugBear Com\, Inc.,DC=example,DC=com
Certificates are self-signed
I can make curl to remote cluster from local one.
curl -vX GET "https://admin:Pass#ekl1.test1.com:9200"
I added remote domain in Kibana GUI: ekl1.test1.com:9200
and getting this error in ES log:
RemoteClusterConnection] [4P1fXFO] fetching nodes from external cluster >[client2] failed
org.elasticsearch.transport.ConnectTransportException: [][172.31.37.123:9200] >handshake_timeout[30s]
Solved by specifying port 9300 instead 9200 in Kibana interface
and
http.cors.enabled: true
http.cors.allow-origin: "*"
I am trying to setup 2 nodes cluster for Elastic search.
cluster.name:test-cluster
node.name: es-node1
node.master: true
node.data: true
path.data: /es/data
path.logs: /es/log
network.host: privateIP
http.port: 9200
transport.tcp.port: 9300
discovery.zen.ping.unicast.hosts: [PublicIP]
discovery.zen.minimum_master_nodes: 1
On node 1 you need to have this so that node 2 can see node 1
network.host: PublicIP-Node1
discovery.zen.ping.unicast.hosts: [PublicIP-Node2]
Similarly, on node 2 you need to have this:
network.host: PublicIP-Node2
discovery.zen.ping.unicast.hosts: [PublicIP-Node1]
I have three machines, installed same ELK(6.2.2) version in all machine,
One is master and another two's are client node,
** Each machine is the different IP address
I have tried like this, but not working
Server:
cluster.name: sever
node.name: main-server
node.data: true
node.ingest: true
node.master: true
node.max_local_storage_nodes: 1
path.data: E:/ELK-6.2.2/elasticsearch/data
path.logs: E:/ELK-6.2.2/elasticsearch/logs
network.host: 11.xx.xx.xx
http.port: 9200
transport.tcp.port: 9300
discovery.zen.ping.unicast.hosts: ["11.XX.XX.XX", "12.xx.xx.xx:9200", "13.xx.xx.xx:9200"]
discovery.zen.minimum_master_nodes: 1
Client:1
cluster.name: client-one
node.name: client-node-one
node.data: true
node.ingest: true
node.master: false
node.max_local_storage_nodes: 1
path.data: E:/ELK-6.2.2/elasticsearch/data
path.logs: E:/ELK-6.2.2/elasticsearch/logs
network.host: 12.xx.xx.xx
http.port: 9200
transport.tcp.port: 9300
discovery.zen.ping.unicast.hosts: ["11.XX.XX.XX", "12.xx.xx.xx:9200", "13.xx.xx.xx:9200"]
discovery.zen.minimum_master_nodes: 1
Client: 2
cluster.name: client-two
node.name: client-node-two
node.data: true
node.ingest: true
node.master: false
node.max_local_storage_nodes: 1
path.data: E:/ELK-6.2.2/elasticsearch/data
path.logs: E:/ELK-6.2.2/elasticsearch/logs
network.host: 13.xx.xx.xx
http.port: 9200
transport.tcp.port: 9300
discovery.zen.ping.unicast.hosts: ["11.XX.XX.XX", "12.xx.xx.xx:9200", "13.xx.xx.xx:9200"]
discovery.zen.minimum_master_nodes: 1
Please guide me how to setup these machines?
cluster.name must be equal for all your hosts.
I cant't start elasticsearch with node.master:false
elasticsearch.yml
cluster.name: graylog2
node.name: "second"
node.master: false
node.data: true
index.number_of_shards: 2
bootstrap.mlockall: true
discovery.zen.ping.multicast.enabled: false
discovery.zen.ping.unicast.hosts: 192.168.93.76
script.disable_dynamic: true
service elasticsearch restart
netstat -an | grep 9200
NULL
YML has very strict syntax, you need to add a space between node.master and false:
node.master: false