I have a programming problem in Visual FoxPro, create a form that contains PageFrame with 2 Page.
1. On Page 1, Create a program to display data in the grid and give the sorting facilities, navigation and search.
2. On Page 2, create a program to calculate volumeTabung and spacious blanket.
Can anyone provide a solution? thank you
Although this is not DOING the answer, but a simple guide.
In the VFP command window,
Create Form [whatever form name you want]
Once form is up, look at the toolbar for "Form Controls". Click on the "PageFrame" control and then click on the form... There, you have a default pageframe with 2 pages as a default.
The "Properties" window should be visible by default. Click on the combobox on at the top which shows all controls. Open the drop-down and you will see "Page1" and "Page2" of the page frame control. Click on either page, and that will bring focus to that respective page.
Now, click on the Forms Controls toolbar again, such as to grab textbox, label, combobox, whatever and then click on the page and your controls are there. Then get focus to the second page and do the same for whatever you want.
Save and run the form. This just gets you to see the controls and how simple to put them on. Actual pulling your data and populating is really more your "to do" list.
Related
I need an idea, please. I have a Details form which shows the fields of a model (about 10 fields in all). There are three modes in which I could show this view - in mode "Edit", in mode "New" (which, of course, is like an edit but without values), and in mode "View" (no changes allowed, just labels).
I could of course create three Details pages, one for each mode, and call them selectively, but I would like to have just one and pass the "DocumentMode" parameter to it. That View should bind to that mode and selectively show/hide controls, probably like "DocumentMode = VIEW => Show labels" or "DocumentMode = EDIT => Show Entry or Editor, show DatePicker, TimePicker, etc".
My question is this: How do I show/hide these groups of controls depending on the DocumentMode parameter ? Which would be the best way to do this ? I could probably bind the "IsVisible" property to my documentMode parameter, but I think that is a really ugly solution (and I assume that regardless of whether the controls are used or not in a specific mode, they will all be loaded anyway).
Thank you.
Alex
I think you can use a Listview or Collectionview to represent your data because you mentioned that you have 10 fields.
In addition, you said you need a "new" button, so you can set it at the top of the app as a button, when you click the button then you jump to another page which is blank and you can add the data.
This must refer to the shell you may need to set a navigation.
Then the "view" and the "edit" you can use the property SelectionChanged to control the item, I mean when you click the item in collectionview, the SelectionChanged method can be triggered and turn to another page which can show the detail about the item you clicked. In the page you can view and edit the data.
Here are some articles you might be able to use: Listview, Collectionview, Shell
If you have more information to add, please kindly share with me.
I have a problem with a validation error to http://www.tsiapos.gr/ (Joomla 3.9.10 - yootheme template0
https://wave.webaim.org/report#/https://tsiapos.gr/
which is related to empty link in "offcanvas"
I don't know where to find the code and how to fix it. Thank you.
That looks like your menu button which is only visible in responsive mode. If I increase my font size or run on mobile, then I see it.
There are two problems with the menu button. The first is that it doesn't have a label that a screen reader can announce. That's the error that WAVE is pointing out. You can fix that by adding an aria-label to your link.
The second problem that WAVE didn't find is that the "state" of your menu (expanded or collapsed) also needs to be conveyed. You do that with aria-expanded. Set the value to "false" when the menu is closed and "true" when the menu is open.
And if you want to get picky, there's a third problem that you're using a link instead of a button. A link should be used for navigation, opening a new page, not for an "action". I'd recommend changing your menu to a <button>.
If you want to use an <a> then you should add role="button" and make sure the space key can be used to select the link. By default, links only allow the enter to select them but a button allows both space and enter.
On the order form, there is a products section that has uses the default Order Product Inline Edit View. This view is not editable, but you can copy it and save it as a different name.
However, when you copy the view, the new view does not display all of the same buttons when viewing the sub-grid.
default view:
copied view (the lock pricing, move up and move down buttons are missing):
The copied view shows the + button and it's drop down menu correctly. Why hasn't it copied the other buttons, and how can i get them to show on my custom view?
I am happy to edit xml and upload that back to CRM if necessary.
Update:
FYI, this is all a pointless effort as the word template ignores the sequence order. What an utter waste of time.
I'm going to guess it's because the default view on the order of order products is a special one. It has special behaviours that arn't seen in the rest of 365, i.e. you don't get up, down, or lock on other views.
I would assume that the extra buttons only get shown on that default view and arn't really supported outside of that view.
Turns out it is actually quite easy to show these buttons for other views using the ribbon workbench.
Right click on the button in ribbon workbench under the subgrid section and click on customise
Select the command in the "solution elements" pane at the bottom
In the bottom right hand pane, right click on the enable rule "Mscrm.IsInlineEditView" and click "Remove from Command"
Publish
These buttons now show up for all views.
Somebody pulled the most random question on me today and I realized I'd never even considered it. What they wanted was my PDF rendering of an SSRS report to come standard with navigation arrows, i.e., previous page, next page. This started me looking at all the options that are available, which are actually kind of cool, and I was able to add on a table of contents, including bookmarks for a new number (e.g., if you're printing 5 invoices with 2-5 pages each into one long document, those will have the invoice number and you can jump to the beginning of that invoice), but I couldn't see anything about navigation links. In fact, most of what I've seen says that PDF's only can have navigation maps, i.e., the table of contents tab. So if anyone has any ideas on how I can do this, that would be great. I know it can be added after-the-fact with something like Blubeam, but that's not practical in this case.
As I mentioned in comments you can create a bookmark in each page. A bookmark can be added using the component DocumentMapLabel property almost all SSRS Report Items (Tablix, Textbox, Charts, etc) have.
If you don't have a title or a textbox at the very top of each page, add an empty textbox, be sure place them at the top of the page in order to each bookmark jumps to the beginning of the corresponding page.
Select the first textbox and press F4 to see the extended properties window, look for DocumentMapLabel and type Page 1.
In each page set the textbox DocumentMapLabel property to the corresponding page number.
When the report is exported to PDF, your PDF client shows the bookmark menu, containing a bookmark for each page. If you click on a bookmark it jumps to the related page.
This is how it looks in Adobe Acrobar Reader:
Let me know if this helps.
I have a Prism/SL3 application with a tab control and each page of the tab control is a "Region" that has its own view and viewModel. when I want to validate the main page, I call dataForm.ValidateItem(), then I go to all the child views and do the same. the problem is, only the pages which user has clicked on them (on the tab page), get instantiated and the pages that are never shown, don't have their view instantiated, thus I can't validate them.
any help?
I created a psuedo work around for this. It's very hacky, but it does work. My example involved walking the visual tree (up and down) to find respective controls that are invalid and then "expanding" the selected item. I have used an accordian in my example, but have also tested this with tab:
http://thoughtjelly.wordpress.com/2009/09/24/walking-the-xaml-visualtree-to-find-a-parent-of-type-t/
HTH,
Mark
EDIT: Link updated.