I am unable to create a virtual device in genymotion, server returned http code 403 shows up everytime I try to download a virtual device . I have tried with both Lan cable and wifi network.Beside that I have tried uninstalling/reinstalling genymotion but result is the same 403 error. Please help.
you can use any free ( or licene) VPN software to change localtion (IP) to any country.
After that you can download virtual device in genymotion
Related
I'm attempting to connect to a Cisco 4010 network switch via it's built in usb port (which internally is a usb to rs232 adapter wired to the back of the console port).
I have installed the Cisco usb console drivers version 3.1
When I plug into the usb port, the little green LED that indicates that the console port has switched to usb does not light up.
When I run putty, and attempt to connect via serial connection to COM16 (the usb to rs232 in the cisco switch) I get:
Unable to open connection to COM16
Opening '\.\COM16': Error 1450: Insufficient System resources exist to complete the requested service.
I have tried reinstalling the drivers to no effect.
I have 3 identical switches, which give me identical behaviour, all 3 new out of the box with no programming.
Changing the Baud rate makes no difference, not that I'm expecting it to as the issue seems to be COM16 doesn't exist or similar
Putty Settings and Device Manager
With the help of a colleague, we narrowed the issue down to windows using a default usb to rs232 driver rather than the cisco one I had installed. The big clue came when I tried using putty inside a VM and it worked, while on the host OS I was still getting error 1450.
We had to compeletely uninstall all drivers, reboot, reinstall drivers manually, reboot, then attempt the usb connection again.
The last comment here describes it:
https://community.cisco.com/t5/cisco-software-discussions/usb-console-cable/td-p/3952600
I will copy the solution across to here, for easier search of the solution for the next person who has the same issue.
For WIn10 , install the setup(x64).exe from the Cisco_usbconsole_driver_3_1.zip.
Check that the Cisco Serial (Comx) is using the correct driver provider which should be Cisco. Don't use the Cypress driver.
Device Manager
To update the driver,
If you installed it already and having issues, uninstall it using the setup(x64),exe then reboot PC.
Uninstall Cisco Driver
First, disconnect the blue Cisco USB console cable. Reinstall the Cisco USB console drive using setup(x64).exe from the Windows_64 folder which was extracted from file Cisco_usbconsole_driver_3_1.zip.
Reboot PC
Open device manager to observe the driver installation. Check that you see "Cisco USB to Serial Adapter". If you don't see it repeat the above steps.
if you see above "Cisco USB to Serial Adapter". then
Update Driver
Click UPDATE DRIVER, then Browse my computer for driver software.
Choose " Let me pick from a list of available driers on my Computer." Select "Cisco Serial".
Pick driver
Finally,. connect to the COM port x indicated in the Device Manager, Ports (COM & LPT) , Cisco Serial (COMx)
I can open my ESP32 Vroom32 device made by Espressif with a cp2101 chip on Ubuntu. I used Ubuntu to flash Micropython onto it, however when I try to connect with Putty, MPFshell or anything else on Windows 10 it will not work. I downloaded and installed the recommended drivers for it and also updated Windows which was supposed to load the driver as well. I can see the device and COM port in device manager but when I attempt to connect I get blocked. For example on MPFshell I get the message "Cannot connect to COM17"
It is a common reason for boards to show the "Cannot Connect to COM" error because of a bad USB cable.
Always check with another cable first, before getting deeper to the problem.
i was try to connect my virtual mac system to visual studio with pair to Mac features but i am getting error message Couldn't retrive SSH Fingerprint please ensure the host is reachable and remote login is enabled
my settings are illustrated below enter image description here
security privacy setting
enable remove login
and also i installed visual studio stable version,Xcode in MAC
network connection
where i am doing wrong , can any one guide me please
i am getting this both, system are run on same network as well
even Mac virtual system IP not ping with my windows machine
I installed virtual box in my computer and it said device driver installation failed.
i tried to manually update the Virtual Box host only ethernet adapter but windows gives an error message saying "Access Denied"
My computer is running on Windows 7 and my virtual box version is 4.2.12
And When I try add host-only network via Virtual Box it gives an error saying "Failed to create host only network interface"
Please Help.
Go to the lefttop corner of VirtualBox manager.
File-Preferences-Network-Host-only networks.
Remove these that you have, if any. (acknowledge as root)
Add a new one. (acknowledge as root)
Check its existence in cmd - ipconfig
Choose it using Host-only connection in Network of your virtual machine.
Maybe, you haven't administrator rights? Then you won't get acknowledgement window, and you really can't create it.
A few useful pieces of information: I'm running Windows 8 Professional on a custom-built rig, and I am using a 'WiFi dongle' to connect my computer to the local router. I am using a home network, not a public/work/school network.
I installed the Windows Phone SDK. Piece of strawberry cheesecake so far. Coded my first simple browser app (as detailed on the Windows Phone Dev site) and hit the Run button, expecting my app to come to life and breathe in links and breathe out websites!
But instead, I got this:
Something happened while creating a switch:
Xde couldn't find an IPv4 address for the host machine.
In this case, the emulator wouldn't run at all. And so, I did my research and found out that the solution was this:
Remove all the switches from Hyper-V Manager's "Virtual Switch Manager", and make a new Internal one called Windows Phone Emulator Internal Switch.
I did, and the error did NOT show up again but it did screw up my WiFi and Bluetooth adapters (which I had to do a system restore to solve) and now both WiFi and Bluetooth peripherals are working again.
However, I got this error instead when running the emulator again:
The Windows Phone Emulator wasn't able to connect to the Windows
Phone operating system:
The emulator couldn't determine the host IP address, which is used to
communicate with the guest virtual machine.
Some functionality may be disabled.
In this case, the emulator did run, but I couldn't find my app anywhere. I did some research again and found that the solution to this was:
Delete the Windows Phone Emulator Internal Switch from Hyper-V Manager's Virtual Switch Manager.
Now, I created the switch to solve the problem in the first place. But I did delete it, for the heck of trying everything out. And no surprise there but, it went back to the first error.
I am now stuck in this paradox and have no idea how to escape it.
Thank you in advance!
follow the following steps to solve this problem
1.go to network and sharing center
2.go to change adapter setting
3.go to v Ethernet (internal Ethernet port windows phone emulator internal switch)
4.right click it and enable it(if already enabled then disable and enable it again).
Remove any Cisco VPN's or similar connections. I have found this VPN client works as a replacement to Cisco https://www.shrew.net/
For me shrew soft version 2.1.7 was the only version that worked.