I'm trying to use the similarity function on a Greemplum system using postgres 9.4.24 version.
The Greenplum System is running on a CentOS 7 cluster (CentOS Linux release 7.9.2009 (Core))
I've managed to install the postgresql-contrib package by running this:
sudo yum install postgresql-contrib.x86_64
However, when I run this command on a DB:
create extension pg_trgm();
I get the following:;
SQL Error [58P01]: ERROR: could not open extension control file "/usr/local/greenplum-db-6.13.0/share/postgresql/extension/pg_trgm.control": No such file or directory
I looked in the directory and the pg_trgm.control wasn't there but I was expecting it since I installed the contrib package.
Is there anything I missed?
I found the contrib repository for Greenplum and downloaded the code here:
https://github.com/greenplum-db/gpdb/tree/master
which includes the contrib directory with all the extensions..
however, when I try to make && make install, I get an error:
[gpadmin#mdw pg_trgm]$ sudo make
Makefile:22: ../../src/Makefile.global: No such file or directory
Makefile:23: /contrib/contrib-global.mk: No such file or directory
make: *** No rule to make target `/contrib/contrib-global.mk'. Stop.
Looking at the directory structure and files, Makefile.global doesn't exists and contrib-global.mk does but not sure if the path is correct, I can try changing the path in the Makefile but not sure.
These are the contents of the Makefile file:
# contrib/pg_trgm/Makefile
MODULE_big = pg_trgm
OBJS = trgm_op.o trgm_gist.o trgm_gin.o trgm_regexp.o $(WIN32RES)
EXTENSION = pg_trgm
DATA = pg_trgm--1.3--1.4.sql \
pg_trgm--1.3.sql pg_trgm--1.2--1.3.sql pg_trgm--1.1--1.2.sql \
pg_trgm--1.0--1.1.sql pg_trgm--unpackaged--1.0.sql
PGFILEDESC = "pg_trgm - trigram matching"
REGRESS = pg_trgm pg_word_trgm pg_strict_word_trgm
REGRESS_OPTS += --init-file=$(top_srcdir)/src/test/regress/init_file
ifdef USE_PGXS
PG_CONFIG = pg_config
PGXS := $(shell $(PG_CONFIG) --pgxs)
include $(PGXS)
else
subdir = contrib/pg_trgm
top_builddir = ../..
include $(top_builddir)/src/Makefile.global
include $(top_srcdir)/contrib/contrib-global.mk
endif
I have checked out the code in my /tmp folder and it created the structure under /tmp/gpdb
UPDATE:
I did follow Bradford suggestions and was able to compile and install, however, I'm getting this when I run:
create extension pg_trgm;
ERROR: could not open extension control file "/usr/local/greenplum-db-6.13.0/share/postgresql/extension/pg_trgm.control": No such file or directory (seg57 172.28.8.8:6001 pid=146663)
I did run manually once I ran the make and make install:
/usr/bin/install -c -m 755 pg_trgm.so '/usr/local/greenplum-db-6.13.0/lib/postgresql/pg_trgm.so'
/usr/bin/install -c -m 644 pg_trgm.control '/usr/local/greenplum-db-6.13.0/share/postgresql/extension/'
/usr/bin/install -c -m 644 pg_trgm--1.1.sql pg_trgm--1.0--1.1.sql pg_trgm--unpackaged--1.0.sql '/usr/local/greenplum-db-6.13.0/share/postgresql/extension/'
I can see the .control file in there so not sure what's going on, it seems it was copied only to the master but not the segment hosts, would that be an issue? Do I need to compile this on every segment host?
UPDATE:
I did install on each segment and now I'm getting this:
SQL Error [0A000]: ERROR: query plan with multiple segworker groups is not supported
Hint: likely caused by a function that reads or modifies data in a distributed table
would this extension not be supported by greenplum?
At a high level, you will want to download the source for the release of GPDB that you are running. You can do this either by downloading the tarball from the GitHub release page or cloning the repository and checking-out the release tag.
Once you have done that, source greenplum_path.sh from your installation of GPDB, change into the the contrib/pg_trgm directory and run
USE_PGXS=true make
USE_PGXS=true make install
Setting USE_PGXS will pull in the missing Makefiles from the installation of GPDB.
If the install location of GPDB is not owned by gpadmin user, then the make install will fail for permission issues; using sudo make install will most likely fail because pg_config won't be found on the path. In that case, I just run make -n install and then manually run the commands prefixed with sudo.
Here are all the steps in a psuedo-shell session:
git clone https://github.com/greenplum-db/gpdb.git
cd gpdb
# use git checkout 6.13.0 for older versions of git
git switch --detach 6.13.0
git submodule update --init --recursive
source /usr/local/greenplum-db-6.13.0/greenplum_path.sh
cd contrib/pg_trgm
USE_PGXS=true make
USE_PGXS=true make -n install
Edit: I should clarify that I haven't tested if pg_trgm works with GPDB, only that it builds and compiles.
I am relatively new to the Cygwin program, and I have a .sh file that I need to edit and execute. I am currently running on Windows 10. I have installed Cygwin64 terminal on my machine.
The full list of steps required are as follows:
Be sure to have libtool installed.
Download protobuf from https://github.com/google/protobuf/ (download ZIP and unZIP at desired location, or clone the repo) The protocol buffer is used for communication between the CuraEngine and the GUI.
Before installing protobuf, change autogen.sh : comment line 18 to line 38 using #s. This removes the dependency on gtest-1.7.0.
Run autogen.sh from the protobuf directory: $ ./autogen.sh
$ ./configure
$ make
$ make install # Requires superused priviliges.
(In case the shared library cannot be loaded, you can try "sudo ldconfig" on Linux systems)
Once I get to 3.:
Before installing protobuf, change autogen.sh : comment line 18 to line 38 using #s. This removes the dependency on gtest-1.7.0.
I am having issues opening up to .sh file in Cygwin to make the appropriate edit.
When I try this command to even execute the .sh file:
$ '/cygdrive/c/Users/Thomas/Desktop/3D Printing/protobuf-master/autogen.sh'
I receive the error:
Could not find source code. Make sure you are running this script
from the root of the distribution tree.
If anyone has some insight as to a solution for this problem it would be greatly appreciated.
You are getting the error from this test in autogen.sh :
# Check that we're being run from the right directory.
if test ! -f src/google/protobuf/stubs/common.h; then
cat >&2 << __EOF__
Could not find source code. Make sure you are running this script from the
root of the distribution tree.
__EOF__
In this test, common.h path is relative to the protbuf install directory, just cd to it before executing the script.
Halo,
I tried to install libiconv with this tutorial http://www.gaia-gis.it/gaia-sins/mingw_how_to.html#libiconv.
I installed MinGW from heise.de, containing MSYS.
In MSYS I made the steps ./configure and make.
Step make install finishes with an error:
libtool:install: /bin/install -c -m 644 .libs/../bin/libiconv-2.dll /usr/local/lib/../bin/libiconv-2.dll
/bin/install: cannot stat .libs/../bin/libiconv-2.dll: No such file or directory
make install error
Leaving directory c/libiconv-1.14/lib
To solve this problem, I copied libiconv-2.dll from C:\MinGW\msys\1.0\local\bin to C:\libiconv-1.14\bin. It was proposed in https://linuxacademy.com/blog/linux/troubleshooting-configure-make-and-make-install-tutorial/ in section make install problems.
The package you just compiled doesn’t have the install target. In this
case you will have to copy the compiled binaries to a bin directory
yourself.
As I compiled with MSYS, I had the binaries under C:\MinGW\msys\1.0\local\bin.
The path to libiconv-2.dll - .libs/../bin/libiconv-2.dll - is right, if current directory is c/libiconv-1.14/lib.
Does anyone know why libiconv-2.dll can't be found? Everything seems to be ok.
update: I don't try to install libiconv anymore!!!
I am running a linux OS.
I want to know the locations of the header files.
I have tried the following :-
cd /lib/modules/$(uname -r)
But there are only two .ko files inside it. I expected results which include folders like build(which contains the include folder, which inturn consists of the header files)
I have even tried doing this :-
sudo apt-get install linux-kernel-($uname -r)
Output
E: Unable to locate package linux-kernel-3.8.13-OpenNetworkLinux-e500mc-1.5
E: Couldn't find any package by regex 'linux-kernel-3.8.13-OpenNetworkLinux-e500mc-1.5'
Try this..
sudo apt-get install linux-headers-$(uname -r)
now look in "/lib/modules/$(uname -r)/build"
I have a problem installing package dionaea.
After I type this:
./configure --with-lcfg-include=/opt/dionaea/include/ \
--with-lcfg-lib=/opt/dionaea/lib/ \
--with-python=/opt/dionaea/bin/python3.1 \
--with-cython-dir=/usr/bin \
--with-udns-include=/opt/dionaea/include/ \
--with-udns-lib=/opt/dionaea/lib/ \
--with-emu-include=/opt/dionaea/include/ \
--with-emu-lib=/opt/dionaea/lib/ \
--with-gc-include=/usr/include/gc \
--with-ev-include=/opt/dionaea/include \
--with-ev-lib=/opt/dionaea/lib \
--with-nl-include=/opt/dionaea/include \
--with-nl-lib=/opt/dionaea/lib/ \
--with-curl-config=/opt/dionaea/bin/ \
--with-pcap-include=/opt/dionaea/include \
--with-pcap-lib=/opt/dionaea/lib/ \
--with-glib=/opt/dionaea
and the next step is:
#make
An error message appears:
make: *** No targets specified and no makefile found. Stop.
My directory is /usr/local/src
make takes a makefile as input. Makefile usually is named makefile or Makefile. The configure command should generate a makefile, so that make could be in turn executed. Check if a makefile has been generated under your working directory.
running ./configure should solve your problem.
I got the same error and i fixed it by looking at the solution from this site:
http://trac.macports.org/ticket/40476.
SO did you got any error after running './configure' ? Maybe something about lacking tclConfig.sh.
If so, instead of running './configure', you have to search for the tclConfigure.sh first and then put it in the command, in my case, its located in /usr/lib/. And then run:
'./configure ----with-tcl=/usr/lib --with-tclinclude=/usr/include'
./configure command should generate a makefile, named makefile or Makefile. if in the directory there is no this file, you should check whether the configure command execute success.
in my case, I configure the apr-util:
./configure --prefix=/usr/local/apr-util --with-apr=/usr/local/apr/bin/apr-1-config
because the --with-apr=/usr/local/apr/bin/apr-1-config, the apr did not install yet, so there configure fail, there did not generate the apr's /usr/local/apr/bin/apr-1-config.
So I install the apr, then configure the apr-util, it works.
You had to have something like this:
"configure: error: "Error: libcrypto required."
after your ./configure runs. So you need to resolve noticed dependencies first and then try ./configure once more time and then run make !
I recently ran into this problem while trying to do a manual install of texane's open-source STLink utility on Ubuntu. The solution was, oddly enough,
make clean
make
If after ./configure Makefile.in and Makefile.am are generated and make fail (by showing this following make: *** No targets specified and no makefile found. Stop.) so there is something not configured well, to solve it, first run "autoconf" commande to solve wrong configuration then re-run "./configure" commande and finally "make"
Delete your source tree that was gunzipped or gzipped and extracted to folder and reextract again. Supply your options again
./configure --with-option=/path/etc ...
Then if all libs are present, your make should succeed.
This may happen if there is any read and write permission denial to the user. Like C:\Windows\System32\ have restricted access and you are cloned and trying to make from such restricted directory.
If you create Makefile in the VSCode, your makefile doesnt run. I don't know the cause of this issue. Maybe the configuration of the file is not added to system. But I solved this way. delete created makefile, then go to project directory and right click mouse later create a file and named Makefile. After fill the Makefile and run it. It will work.
Try
make clean
./configure --with-option=/path/etc
make && make install
In my case there was a file Makefile.PL in a database library:
http://www.cpan.org/modules/by-module/DBI/DBI-1.630.tar.gz
The following command created the makefile
perl Makefile.PL
After that, make command worked
I think that it can mean that ./configure command failed for some reason, in my case it was due to a missing package. So i have used my OS package manager to install required package (autoconf and autoconf-archive in my case), then it worked.
first time try
make clean
make
if these didn't solve your issue you have to install build packages.
debian base
apt-get install build-essential libgtk-3-dev
For RHEL/CentOS
sudo yum install gcc glibc glibc-common gd gd-devel -y
Step 1: Install the Required Dependencies
First, launch the Terminal and run the commands below to install the required dependencies and libraries.
sudo apt install autoconf automake libpcre3-dev libnl-3-dev libsqlite3-dev libssl-dev ethtool build-essential g++ libnl-genl-3-dev libgcrypt20-dev libtool python3-distutils
sudo apt install -y pkg-config
Step 2: Compile and Install
Now, run the commands below (one by one in order) to compile the source code and install Your Repo on your system.
[Before this enter you directory ex: cd folder_name]
sudo autoreconf -i
sudo ./configure --with-experimental --with-ext-scripts
sudo make
sudo make install
I hope this time problem will be solved.
You need to check the output of the configure command.
Mine contained this error:
configure: error: in `/home/ubuntu/build/php-8.0.19':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Then I googled the error and solved it.
Before running "make" you need to configure your build using "CMake"
Try:
cmake .
Creating Makefile in the VScode did not worked for me. So, delete the make file created in the VS code, go to the project directory and create file add all the commands in it and name it as Makefile and save. Then try to execute it in VS code. It will work. Don't know why it doesn't work with VS code.
Unpack the source from a working directory and cd into the file directory as root. Use the commands ./configure then make and make install