I'm trying to validate the number of arguments in a shell script I'm creating.
The script will be using expect.
Error
invalid command name "$#"
while executing
"$# -ne 3 "
invoked from within
"if [ $# -ne 3 ] then"
Script:
#!/usr/bin/expect -f
if [ $# -ne 3 ] then
echo "Wrong number of arguments provided"
echo "fgrep_host.sh hostname filter_text new_file"
exit
fi
As #Dinesh said, an expect script is not a shell script, it's an expect script, which is Tcl.
To do what you want, you'd write it:
#!/usr/bin/expect -f
if {$argc != 3} {
puts "Wrong number of arguments provided"
puts "fgrep_host.sh hostname filter_text new_file"
exit 1
}
(though you shouldn't be adding the .sh extension)
You're going to have to read up on expect and Tcl to continue.
Related
I am very new to Bash scripting, can someone explain to me how the $# and $? work in the following code?
#!/bin/bash
ARGS=3 # Script requires 3 arguments.
E_BADARGS=85 # Wrong number of arguments passed to script.
if [ $# -ne "$ARGS" ]
then
echo "Usage: `basename $0` old-pattern new-pattern filename"
exit $E_BADARGS
fi
old_pattern=$1
new_pattern=$2
if [ -f "$3" ]
then
file_name=$3
else
echo "File \"$3\" does not exist."
exit $E_BADARGS
fi
exit $?
From Learn Bash in Y minutes:
# Builtin variables:
# There are some useful builtin variables, like
echo "Last program's return value: $?"
echo "Script's PID: $$"
echo "Number of arguments passed to script: $#"
echo "All arguments passed to script: $#"
echo "The script's name: $0"
echo "Script's arguments separated into different variables: $1 $2..."
From https://www.gnu.org/software/bash/manual/html_node/Special-Parameters.html
$# Expands to the number of positional parameters in decimal.
$? Expands to the exit status of the most recently executed foreground pipeline.
$# shows the number of the script's arguments
$? shows the last script's return value
about arguments: echo "ARG[$#]" before if and then execute the script like
script.sh 1
the ouput will be
ARG[1]
Usage: g old-pattern new-pattern filename
and so on
the ouput of $? could be also used on the command line:
#shell>ls
file1.txt g inpu nodes_list
#shell>echo $?
0
#shell>ls FileNameNotFound
ls: FileNameNotFound: No such file or directory
#shell> echo $?
1
In bash exist special variables... and i write you some of then.
$#- this is an special variable that content inside the number of command line (you can just count how many parameters were entered) you passed to the script. tis variable also represent the last command line but its better do this ${!#}
$?- this one is very special cause its represents is your script is fine this variable holds the exit status of the previosly command... its a littler confusing but it work perfectly... when you end you script you can positional this variable at the end and if she return 0 value you scrip is perfect is true, if she return 1 or others you must check out your lines.
So I started today taking a look at scripting using vim and I'm just so very lost and was looking for some help in a few areas.
For my first project,I want to process a file as a command line argument, and if a file isn't included when the user executes this script, then a usage message should be displayed, followed by exiting the program.
I have no clue where to even start with that, will I need and if ... then statement, or what?
Save vim for later and try to learn one thing at a time. A simpler text editor is called nano.
Now, as far as checking for a file as an argument, and showing a usage message otherwise, this is a typical pattern:
PROGNAME="$0"
function show_usage()
{
echo "Usage: ${PROGNAME} <filename>" >&2
echo "..." >&2
exit 1
}
if [[ $# -lt 1 ]]; then
show_usage
fi
echo "Contents of ${1}:"
cat "$1"
Let's break this down.
PROGNAME="$0"
$0 is the name of the script, as it was called on the command line.
function show_usage()
{
echo "Usage: ${PROGNAME} <filename>" >&2
echo "..." >&2
exit 1
}
This is the function that prints the "usage" message and exits with a failure status code. 0 is success, anything other than 0 is a failure. Note that we redirect our echo to &2--this prints the usage message on Standard Error rather than Standard Output.
if [[ $# -lt 1 ]]; then
show_usage
fi
$# is the number of arguments passed to the script. If that number is less than 1, print the usage message and exit.
echo "Contents of ${1}:"
cat "$1"
$1 is out filename--the first argument of the script. We can do whatever processing we want to here, with $1 being the filename. Hope this helps!
i think you're asking how to write a bash script that requires a file as a command-line argument, and exits with a usage message if there's a problem with that:
#!/bin/bash
# check if user provided exactly one command-line argument:
if [ $# -ne 1 ]; then
echo "Usage: `basename "$0"` file"
exit 1
# now check if the provided argument corresponds to a real file
elif [ ! -f "$1" ]; then
echo "Error: couldn't find $1."
exit 1
fi
# do things with the file...
stat "$1"
head "$1"
tail "$1"
grep 'xyz' "$1"
I have a shell script where I pass (2) parameters, one to pass a dbname, the other to call one of (2) filenames. I want to check if either filename exists, then proceed with calling that script, else exit because the user can enter the wrong string and construct my_foo.sql which I don't want. I don't think I have the condition for setting "or" correctly since putting the correct param still produces error. Is there a better way to write this?
Here is what I have so far.
#/usr/bin/ksh
if [ $# != 2 ]; then
echo "Usage: test.sh <dbname> <test|live>" 2>&1
exit 1
fi
# Check actual file name
CHKSCRIPT1=/tmp/my_test.sql;
CHKSCRIPT2=/tmp/my_live.sql;
if [ -f "CHKSCRIPT1" ] || [ -f "CHKSCRIPT2" ]
then
/bin/sqlplus -s foo/bar #/my_$2.sql
else
echo "Correct sql script does not exist. Enter test or live"
exit 1
fi
Your issue is that you're not referencing your variables correctly:
if [ -f "$CHKSCRIPT1" ] || [ -f "$CHKSCRIPT2" ]
...
fi
edit: Per #chepner, you shouldn't use -o
In addition to the problem you had with expanding the parameters, you should separate what the user types from what files need to exist. If the user enters "live", the only thing that matters is whether or not /tmp/my_live.sql exists. If the user enters "injection_attack", your script should not execute /tmp/my_injection_attack.sql (which presumably was created without your knowledge). The right thing to do is to first verify that a valid command was entered, then check if the appropriate file exists.
if [ $# != 2 ]; then
echo "Usage: test.sh <dbname> <test|live>" 2>&1
exit 1
fi
case $2 in
test|live)
filename="/tmp/my_{$2}.sql"
;;
*) echo "Must enter test or live"
exit 1
;;
esac
if [ -f "$filename" ]; then
/bin/sqlplus -s foo/bar #/my_$2.sql
else
echo "SQL script $filename does not exist."
exit 1
fi
I want a script to run a main.ksh to run both one.ksh and second.ksh only if output of one.ksh matches "1". So if the output is anything other than "1" then second.ksh shouyld not run.
cat one.ksh
#!/usr/bin/ksh
echo "1"
cat second.ksh
#!/usr/bin/ksh
echo "2"
I did this:
#!/usr/bin/ksh
ksh .ksh > one.txt
file="one.txt"
while read line
do
if [ $line -eq 2 ] ;then
ksh second.ksh
else
echo "one.ksh is no good"
fi
done <"$file"
Any better way ro this is good?
Instead of echo 1 to proceed from the first script, you should use exit 0. If it shouldn't proceed, exit 1.
This is the standard way of signaling success and failure in Unix.
Once you do this, you can use any of:
first.ksh && second.ksh
or
if first.ksh
then
second.ksh
fi
or
set -e # Automatically exit script if a command fails
first.ksh
second.ksh
out=`one.ksh`
if [ "x$out" == "x1" ]; then
second.ksh
fi
I've gone around and around on the quoting stuff on http://tldp.org for bash and googled until I am blue in the face. I've also tried every obvious quoting scheme for this issue, and yet nothing works.
The problem seems to be that a space inside of a quoted argument in the command run at the end of the script is being interpreted as a separator instead of as a quoted space.
Behold, here's my script (I know full well I'm a noob so comments on my style and/or uneccessary syntax is cool with me, I'll learn):
#!/bin/bash
date=`date`
args="$#"
MSEND_HOME=/home/patrol/Impact #Path to the Impact Directory
integrationName=Introscope #Name of the integration
persistEnabled=1 #1 for Yes, 0 for No
persist=""
bufDir=$MSEND_HOME/tmp/$integrationName #DO NOT CHANGE
cellName=linuxtest #Cell name to forward events to
loggingEnabled=1 #1 for Yes, 0 for No
logFile=$MSEND_HOME/log/$integrationName.$cellName.log
die () {
if [ $loggingEnabled -eq 1 ]
then
echo >>$logFile "$#"
fi
exit 1
}
[ "$#" -ge 1 ] || die "$date - At least 1 argument required, $# provided" "$#"
# This is where you would parse out your arguments and form the following
# slots as a minimum for sending an event.
class=$2
msg=\"$3\"
# Parse the first argument and assign the correct syntax
if [[ $1 == "INFORMATIONAL" ]]
then
severity=INFO
elif [[ $1 == "WARN" ]]
then
severity=WARNING
elif [[ $1 == "CRIT" ]]
then
severity=CRITICAL
else
severity=INFO
fi
#Additional slots can be set, parse them all in this variable;
#e.g., additionalSlots="slot1=value1;slot2=value2;slot3=\"value 3\""
additionalSlots=""
cmd="$MSEND_HOME/bin/msend"
cmd="$cmd -q"
cmd="$cmd -l $MSEND_HOME"
if [ $persistEnabled -eq 1 ]
then
cmd="$cmd -j $bufDir"
fi
cmd="$cmd -n $cellName"
cmd="$cmd -a $class"
cmd="$cmd -m $msg"
cmd="$cmd -r $severity"
if [ $additionalSlots ]
then
cmd="$cmd -b $additionalSlots"
fi
$cmd || die "$date - msend exited with error $? | Original arguments: $args | Command: $cmd"
#echo "msend exited with error $? | Original arguments: $args | Command: $cmd"
The script is executed like this:
./sendEvent.sh "CRIT" "EVENT" "Test Event"
The error I get from the msend executable is that the arguments are wrong, but I'm logging the command line in it's entirety to a file and when I run that logged command in the shell interactively, it works.
Here's the log output:
Tue Oct 4 20:31:29 CDT 2011 - msend exited with error 27 | Original arguments: CRIT EVENT Test Event | Command: /home/patrol/Impact/bin/msend -q -l /home/patrol/Impact -j /home/patrol/Impact/tmp/Introscope -n linuxtest -a EVENT -m "Test Event" -r CRITICAL
So if I paste /home/patrol/Impact/bin/msend -q -l /home/patrol/Impact -j /home/patrol/Impact/tmp/Introscope -n linuxtest -a EVENT -m "Test Event" -r CRITICAL and run it, it works.
If I run the script like ./sendEvent.sh "CRIT" "EVENT" "TestEvent" it works. But I need that argument to allow spaces.
I'm on the track that it's an $IFS issue or something... maybe a difference between the interactive shell and the script environment.
I'd appreciate any insight from smarter people than me!
tl;dr - My command doesn't work when run from within a script, but does when the logged command syntax is used in an interactive shell.
Short answer: see BashFAQ #50.
Long answer: When bash parses a line, it parses quote marks before doing variable substitution; as a result, when you put quotes inside a variable, they don't do what you'd expect. You're actually passing an argument list including '-m' '"Test' 'Event"' '-r' -- those double-quotes aren't around the arguments, they're in the arguments.
In this case, the best solution is to build the command in an array rather than a string. Also, get in the habbit of putting double-quotes around variables (e.g. filenames) when you use them, to prevent confusion if they contain spaces. With those changes (and a few other tweaks), here's my version of your script:
#!/bin/bash
date="$(date)" # Backquotes are confusing, use $() instead
args=("$#") # Save the args in an array rather than mushing them together in a string
MSEND_HOME=/home/patrol/Impact #Path to the Impact Directory
MSEND_HOME="$HOME/tmp" #Path to the Impact Directory
integrationName=Introscope #Name of the integration
persistEnabled=1 #1 for Yes, 0 for No
persist=""
bufDir="$MSEND_HOME/tmp/$integrationName" #DO NOT CHANGE
cellName=linuxtest #Cell name to forward events to
loggingEnabled=1 #1 for Yes, 0 for No
logFile="$MSEND_HOME/log/$integrationName.$cellName.log"
die () {
if [ $loggingEnabled -eq 1 ]
then
echo >>"$logFile" "$#"
fi
exit 1
}
[ "$#" -ge 1 ] || die "$date - At least 1 argument required, $# provided" "$#"
# This is where you would parse out your arguments and form the following
# slots as a minimum for sending an event.
class="$2" # Quotes not strictly needed here, but a good habbit
msg="$3"
# Parse the first argument and assign the correct syntax
if [[ "$1" == "INFORMATIONAL" ]]
then
severity=INFO
elif [[ "$1" == "WARN" ]]
then
severity=WARNING
elif [[ "$1" == "CRIT" ]]
then
severity=CRITICAL
else
severity=INFO
fi
#Additional slots can be set, parse them all in this array;
#e.g., additionalSlots="slot1=value1;slot2=value2;slot3=value 3" # Don't embed quotes
additionalSlots=""
cmd=("$MSEND_HOME/bin/msend") # Build the command as an array, not a string
cmd+=(-q) # Could equivalently use cmd=("${cmd[#]}" -q), but this is simpler
cmd+=(-l "$MSEND_HOME")
if [ $persistEnabled -eq 1 ]
then
cmd+=(-j "$bufDir")
fi
cmd+=(-n "$cellName")
cmd+=(-a "$class") # Possible bug: $2 and #3 aren't required, but they're getting added unconditionally
cmd+=(-m "$msg") # These should probably be conditional, like additionalSlots
cmd+=(-r "$severity")
if [ -n "$additionalSlots" ]
then
cmd+=(-b "$additionalSlots")
fi
"${cmd[#]}" || die "$date - msend exited with error $? | Original arguments:$(printf " %q" "${args[#]}") | Command:$(printf " %q" "${cmd[#]}")"
#echo "msend exited with error $? | Original arguments:$(printf " %q" "${args[#]}") | Command:$(printf " %q" "${cmd[#]}")"
I think the arg goes wrong with this assignment: cmd="$cmd -m $msg".
Change it to cmd="$cmd -m \"$msg\"".
Okay, I don't see the exact problem immediately, but I can tell you what it is; this hint should help.
Remember that the shell quoting mechanism only interprets a string once. As a result, if you're not careful, what you thought was "foo" "a" "b" is in fact "foo a b" -- that is, all one token, not three.
Run the script with bash -x which will show you at each step what the shell is actually seeing.