SSL invalid security certificate with firefox only - firefox

API GET call from a website only from mozilla browser I get following error "VIP uses invalid security certificate. The certificate is not trusted because the issuer certificate is unknown. The server might not be sending the appropriate intermediate certificates. An additional root certificate may need to be imported”
tested the vip thru SLLLABS.com found out that cipher suite returned from my certificate from server is not in the preference list of mozilla - https://www.ssllabs.com/ssltest/viewClient.html?name=Firefox&version=47&platform=Win%207&key=132
Is this could be the issue ? How to add the required cipher suite in the certificate, what steps to follow.
Report also indicated there is no forward secrecy and session cahcing, not sure if this causes this issue?!
SSL Lab report.
Firefox 31.3.0 ESR / Win 7 Server closed connection
Firefox 46 / Win 7 R Server closed connection
Firefox 47 / Win 7 R Server closed connection
Forward Secrecy No WEAK (more info)
Session resumption (caching) No (IDs assigned but not accepted)

cipher suite returned from my certificate from server is not in the preference list of mozilla - Is this could be the issue ?
No. Your error message is specifically:
"The certificate is not trusted because the issuer certificate is unknown. The server might not be sending the appropriate intermediate certificates. An additional root certificate may need to be imported"
This specific issue is that Firefox can't build a chain back to a trusted root. Firefox uses its own root store and root program, so it differs in behavior of IE / Edge / Chrome, all of which use the Windows certificate store or OS X certificate store.
Without knowing exactly which CA issued your certificate, and what intermediates your server is set to serve, it's hard to say exactly what is wrong.
If SSL Labs says the certificate is fine, look for "incomplete chain" or "extra downloads" in orange where it displays the certificate chain. If those show, then you have an incomplete chain, which are necessary to building back to the root.
If SSL labs says your certificate isn't trusted (shows a big red 'T') then your certificate is not issued by a public CA, or SSL Labs wasn't able to find the intermediates, either.
Report also indicated there is no forward secrecy and session cahcing, not sure if this causes this issue?!
Forward secrecy is a very good thing to have enabled but it is not the cause of this error.

Related

Two valid certificates equal one invalid certificate

I'm fairly new to the whole certificate shebang and not a versed Linux admin.
In our company, we run a Windows domain, but we also have some CentOS servers for different services.
On one of said servers we have our ticket system, which is browser based. I want to certify it with a certificate, signed by our Windows root CA, but no matter what I do, the certificate is shown as invalid in the browser.
Funny enough, both certificates in the chain (CA -> server) are shown as valid.
I already did the following:
start certificate process from scratch
tried different certificate formats (.cer, .pem)
verified server cert with root cert
checked validity with openssl (OK)
checked SSL connection with openssl, no issues
added root cert to Linux server trusted CA store
recreated cert chain (of 2)
restarted Apache over and over
reset browser cache
tried different browser
checked DNS entries
checked, if root CA is trusted in Windows (it is)
manually installed server cert in my browser
Both the server cert and the root cert show up as valid in the browser, with the correct relation.
I'm completely lost here. Is there some key step I forgot and not one of the ~30 guides I read forgot to mention?
Any help is greatly appreciated
Your question is missing some information:
Did you check the SSL connection from outside the server?
Did you verify the RootCA cert is inside the cert-store of the server (sometimes it is rejected without error messages)?
I would check the reason for rejecting the certificate in the browser (FireFox is usually more informative than Chrome), and look for the error-code.
Reasons can be (some of which you have already verified):
Wrong certificate properties (missing the required values in the "usage" attribute)
Wrong domain name
Expired certificate
Certificate could not be verified on the client-side
See this image as an example of an error code:
https://user-images.githubusercontent.com/165314/71407838-14f55a00-2634-11ea-8a30-c119d2eb1eb1.png

Git-For-Windows not reading my self-signed SSL certificate

I deploy my CA cert via GPO into Trusted Root Certification Authorities, which I can see is deployed to my client machines. I know this part is working as Chrome no longer moans when browsing to sites using my signed SSL certs.
However, when I try and git clone or push to any repositories behind an SSL cert signed by this CA, git-for-windows bawlks and says this:
schannel: next InitializeSecurityContext failed: Unknown error
(0x80092012) - The revocation function was unable to check revocation
for the certificate.
As you can see, I've got schannel enabled, but git-for-windows is clearly not reading my CA cert from the Certificate Store in Windows. Any one know how I make gfw read from the Certificate Store in Windows? I can't manually copy this cert onto all my Windows clients, that'd take forever.
Perhaps worth noting I'm using multiple Samba 4 instances as Domain Controllers, but I don't have access to Windows Server tools such as AS Certificate Services.
nb. I know I can disable tls verification, but that surely defeats the purpose.

Why is Firefox saying that my website is using an "invalid security certificate"?

I have been using a wildcard SSL certificate for several of my company's B2B websites for some time. Recently, we noticed that Google Chrome started displaying a red unlocked lock with HTTPS crossed out for all of these websites. The solution I found was to reissue the certificate from the provider (Network Solutions). So, I did this, and updated the certificate for each of the websites, and the Google Chrome issue went away (HOORAY!). However, when visiting any of these websites in Firefox, it displays a security message stating the website is using an invalid security certificate:
How can I resolve this so that our users are not confused when visiting these websites?
P.S. These websites are running on IIS6.
It looks as if the certificate chain is incomplete and, thus, Firefox (and likely other browsers) cannot verify the site certificate. Normally browsers store intermediate certificates they have seen in the past - that might be a reason why it works in Chrome.
You can test using https://www.ssllabs.com/ssltest/analyze.html.
Depending on the server software (here, for Apache httpd and other servers which read the certificate in PEM/DER format), you can just paste the intermediate certificates together with the certificate in one .pem file (which is used as Certificate file).
The chain (intermediate certificates) is/are normally provided by your CA. In your case you could also use Chrome the review the certificate and then store/extract all intermediate certificates from the certificate view.
You can get this certificate is not trusted error if server doesn't send a required intermediate certificate.
Firefox automatically stores intermediate certificates that servers send in the Certificate Manager for future usage.
If a server doesn't send a full certificate chain then you won't get an untrusted error when Firefox has stored missing intermediate certificates from visiting a server in the past that has send it, but you do get an untrusted error if this intermediate certificate isn't stored yet.
You can inspect the certificate chain via a site like this:
http://www.networking4all.com/en/support/tools/site+check/
I followed the instructions at enter link description here, to import the intermediate certificates.
In IIS, there is an option under Directory Security to "Enable certificate trust list". I enabled it and added the "AddTrust External CA Root" to the CTL certificates list and this appears to have fixed the issue.

Always get a Security Error for Internal HTTPS Website

Full disclosure, I asked this question over at Ask Different (https://apple.stackexchange.com/questions/96776/always-get-a-security-error-for-internal-https-website) but didn't get much helpful feedback. I'm hoping this question fits better here.
My company recently changed an internal site to use HTTPS instead of HTTP (it is our Jira site in case that matters). From what I can tell, this site is using an internal certificate. On our work computers this certificate appears to be pre installed so the website comes up without trouble in IE, Firefox, and Chrome. However, my personal computer is a Mac (OS X 10.8.4) and I am having major troubles accessing the site through any browser. I have followed instructions to install the certificate in my Keychain and I believe I have successfully done that, but I am still not able to access the site.
When Accessing the site I Get:
Chrome: Invalid Server Certificate You attempted to reach jira.surescripts.local, but the server presented an invalid certificate.
Safari: Safari can't open the page Safari can't open the page "https://jira.local:8081/" because Safari can't establish a secure connection to the server "jira.local"
In Chrome when I view the certificate information it I see: Intermediate certificate authority. Expires: Thursday, May 21, 2015 1:19:28 PM Central Daylight Time. This certificate is valid
To make sure that it wasn't something strange with our company's VPN, I installed a Windows 7 virtual machine on my Mac and installed the certificate in Windows and am able to successfully log on to the site how I always would.
I am not much of an expert with certificates and I really don't know where to go from here. Any help would be greatly appreciated! Thanks.
It almost sounds like you need to trust a self-signed certificate? Perhaps follow: https://confluence.atlassian.com/display/SOURCETREEKB/Resolving+SSL+Self-Signed+Certificate+Errors
Sefl signed certificate always triger warnings in web browsers.
To validate a server certificate you must have in the client browser the CA certificate wich was used to sign the SSL server certificate.
Your company should create a CA cert, then create a server SSL cert. signed with the CA and put it on the web server. The clients install public part of the CA cert in "Trusted CA" certificate store. When client conect to the web server the server sent the signed SSL certificate, the client check if it is a "trusted" cert (was signed by a trusted CA) and if everithing is Ok the client doesn't show the warning.
You ended with this cert chain:
CA cert->SSL cert
CA cert public part is installed in client broser as trusted CA. SSL is put in the web server. Client validate SSL cert agaist its Trusted CA certs installed in its Certificate Stores.
It is like CyberTrus CA. You can see how you have Baltimore Cyber Trust Root and Cybertrust Public SureServer SB CA installed in your computer and when you enter into https://www.bancosantander.es/cssa/Satellite?pagename=SantanderComercial/Page/SAN_Index you can see that *.bancosantander.es certificate is valid because you are trusting in the chain.
Your company needs to create the root, then create the SSL signed by the root. The root (public part) is distributed to the client for install. The server sends the SSL to client in HTTPS protocol.
Check this link for more info.
The problem is probably the encryption protocols that your Mac and the company web site don't match up.
Safari Browsers for OS X before Safari 7 (up to 6.0.7 which was on OS X 10.8.4) use the SSL 3.0 protocol, which has vulnerabilities and is considered insecure. Most newer and well-designed web sites use TLS 1.1 and/or TLS 1.2.
Browser encryption capabilities for Safari 6.0.4
Find out from your company if that is what is set up. The same site that has the specs I linked to allow you to enter a web site, and they'll throw a battery of test transactions at it to test it's security and what will connect, but I doubt you can use that for an internal site. Ask your IT folks what encryption protocols they are using.
As a solution, I believe there are versions of Firefox and/or Chrome that can run on 10.8.4 that use TLS 1.2.
List of major browser versions that support TLS 1.2

Making secure HTTPS connection

I got a task on my Security classes. I have to generate two RSA keys (A and B), treat B as CA and then:
For key A:
Generate a certificate request.
Receive certificate from CA.
Use this key and the coresponding certificate in my local HTTPS server (XAMPP)
For key B:
Become a CA.
Generate a certificate for A.
Import this CA certificate in browser.
The result should be a nice green padlock in Chrome's address bar. However, after all this steps I've only managed to get rid of "Entering untrusted site" warning, but the red padlock is still there. The information says:
localhost
Identity not veryfied.
The identity of the server to which you are connected cannot be fully validated.
Any suggestions?
With the commentary I received, I was able to successfully resolve the issue.
However, it seems that Google Chrome has additional security rules when compared to Firefox. Using Mozilla's browser I haven't noticed any warnings concerning my certificate.

Resources