I have a file, which has multiple lines.
For example:
a
ab#
ad.
a12fs
b
c
...
I want to use sed or awk delete the line, if the line include symbols or numbers. (For example, I want to delete: ab#, ad., a12fs.... lines)
or in another words, I just want to keep the line which include [a-z][A-Z] .
I know how to delete number line,
sed '/[0-9]/d' file.txt
but I do not know how to delete symbols lines.
Or there has any easy way to do that?
To keep blank lines:
grep '^[[:alpha:]]*$' file
sed '/[^[:alpha:]]/d' file
awk '/^[[:alpha:]]*$/' file
To remove blank lines:
grep '^[[:alpha:]]+$' file
sed -E -n '/^[[:alpha:]]+$/p' file
awk '/^[[:alpha:]]+$/' file
grep works well too and is even simpler: just do the reverse: keep the lines that interest you, which are way easier to define
grep -i '^[a-z]*$' file.txt
(match lines containing only letters and empty lines, and -i option makes grep case-insensitive)
to remove empty lines as well:
grep -i '^[a-z]+$' file.txt
caution when using Windows text files, as there's a carriage return at the end of the line, so nothing would match depending on grep versions (tested on windows here and it works)
but just in case:
grep -iP '^[a-z]*\r?$'
(note the P option to enable perl expressions or \r is not recognized)
You can use this sed:
sed '/^[A-Za-z0-9]\+$/!d' file
(OR)
sed '/[^A-Za-z0-9]/d' file
$ awk '!/[^[:alpha:]]/' file.txt
a
b
c
Related
how to remove comment lines (as # bal bla ) and empty lines (lines without charecters) from file with one sed command?
THX
lidia
If you're worried about starting two sed processes in a pipeline for performance reasons, you probably shouldn't be, it's still very efficient. But based on your comment that you want to do in-place editing, you can still do that with distinct commands (sed commands rather than invocations of sed itself).
You can either use multiple -e arguments or separate commands with a semicolon, something like (just one of these, not both):
sed -i 's/#.*$//' -e '/^$/d' fileName
sed -i 's/#.*$//;/^$/d' fileName
The following transcript shows this in action:
pax> printf 'Line # with a comment\n\n# Line with only a comment\n' >file
pax> cat file
Line # with a comment
# Line with only a comment
pax> cp file filex ; sed -i 's/#.*$//;/^$/d' filex ; cat filex
Line
pax> cp file filex ; sed -i -e 's/#.*$//' -e '/^$/d' filex ; cat filex
Line
Note how the file is modified in-place even with two -e options. You can see that both commands are executed on each line. The line with a comment first has the comment removed then all is removed because it's empty.
In addition, the original empty line is also removed.
#paxdiablo has a good answer but it can be improved.
(1) The '/^$/d' clause only matches 100% blank lines.
If you want to also match lines that are entirely whitespace (spaces, tabs etc.) use this instead:
'/^\s*$/d'
(2) The 's/#.*$//' clause only matches lines that start with the # character in column 0.
If you want to also match lines that have only whitespace before the first # use this instead:
'/^\s*#.*$/d'
The above criteria may not be universal (e.g. within a HEREDOC block, or in a Python multi-line string the different approaches could be significant), but in many cases the conventional definition of "blank" lines include whitespace-only, and "comment" lines include whitespace-then-#.
(3) Lastly, on OSX at least, the #paxdiablo solution in which the first clause turns comment lines into blank lines, and the second clause strips blank lines (including what were originally comments) doesn't work. It seems to be more portable to make both clauses /d delete actions as I've done.
The revised command incorporating the above is:
sed -e '/^\s*#.*$/d' -e '/^\s*$/d' inputFile
This tiny jewel removes all # comments, no matter where they begin in a line (see caution below):
sed -e 's/\s*#.*$//'
Example:
text="
this is a # test
#this is a test
#this is a #test
this is # another #test
"
$echo "$text" | sed -e 's/\s*#.*$//'
this is a
this is
Next this removes any resulting blank lines:
$echo "$text" | sed -e 's/\s*#.*$//' | sed -e '/^\s*$/d'
Caution: Depending on the syntax and/or interpretation of the lines your processing, this might not be an appropriate solution, as it just stupidly removes end of lines, even if the '#' is part of your data or code. However, for use cases where you'll never use a hash except for as an end of line comment then it works fine. So just as with all coding, context must be taken into consideration.
Alternative variant, using grep:
cat file.txt | grep -Ev '(#.*$)|(^$)'
you can use awk
awk 'NF{gsub(/^[ \t]*#/,"");print}' file
First example(paxdiablo) is very good except its not change file, just output result. If you want to change it inline:
sudo sed -i 's/#.*$//;/^$/d' inputFile
On (one of) my linux boxes, sed understands extended regular expressions with the -r option, so:
sed -r '/(^\s*#)|(^\s*$)/d' squid.conf.installed
is very useful for showing all non-blank, non comment lines.
The regex matches either start of line followed by zero or more spaces or tabs followed by either a hash or end of line, and deletes those matching lines from the input.
I need to delete from a file all the words that do not contain any uppercase in bash.
I use the sed command but the output is the same as the input:
I tried sed 's/[^0-9]*//' file
Example input:
sjasd
ksaLK
asdn
Asdw
Output
ksaLK
Asdw
Could you please try following.
sed -n '/[A-Z]/p' Input_file
As per #PaulHodges's comment, once you are happy with results use sed -i .... option in above code to make changes in Input_file itself.
To make a file without those:
grep '[A-Z]' infile > outfile
This is a nondestructive way to check first. Then you could replace the old file with the new one.
If you really want to edit the existing file in place:
sed -i '/[A-Z]/!d' infile
This says to delete all lines that do not have a capital letter.
How would I use sed to delete all lines in a text file that contain a specific string?
To remove the line and print the output to standard out:
sed '/pattern to match/d' ./infile
To directly modify the file – does not work with BSD sed:
sed -i '/pattern to match/d' ./infile
Same, but for BSD sed (Mac OS X and FreeBSD) – does not work with GNU sed:
sed -i '' '/pattern to match/d' ./infile
To directly modify the file (and create a backup) – works with BSD and GNU sed:
sed -i.bak '/pattern to match/d' ./infile
There are many other ways to delete lines with specific string besides sed:
AWK
awk '!/pattern/' file > temp && mv temp file
Ruby (1.9+)
ruby -i.bak -ne 'print if not /test/' file
Perl
perl -ni.bak -e "print unless /pattern/" file
Shell (bash 3.2 and later)
while read -r line
do
[[ ! $line =~ pattern ]] && echo "$line"
done <file > o
mv o file
GNU grep
grep -v "pattern" file > temp && mv temp file
And of course sed (printing the inverse is faster than actual deletion):
sed -n '/pattern/!p' file
You can use sed to replace lines in place in a file. However, it seems to be much slower than using grep for the inverse into a second file and then moving the second file over the original.
e.g.
sed -i '/pattern/d' filename
or
grep -v "pattern" filename > filename2; mv filename2 filename
The first command takes 3 times longer on my machine anyway.
The easy way to do it, with GNU sed:
sed --in-place '/some string here/d' yourfile
You may consider using ex (which is a standard Unix command-based editor):
ex +g/match/d -cwq file
where:
+ executes given Ex command (man ex), same as -c which executes wq (write and quit)
g/match/d - Ex command to delete lines with given match, see: Power of g
The above example is a POSIX-compliant method for in-place editing a file as per this post at Unix.SE and POSIX specifications for ex.
The difference with sed is that:
sed is a Stream EDitor, not a file editor.BashFAQ
Unless you enjoy unportable code, I/O overhead and some other bad side effects. So basically some parameters (such as in-place/-i) are non-standard FreeBSD extensions and may not be available on other operating systems.
I was struggling with this on Mac. Plus, I needed to do it using variable replacement.
So I used:
sed -i '' "/$pattern/d" $file
where $file is the file where deletion is needed and $pattern is the pattern to be matched for deletion.
I picked the '' from this comment.
The thing to note here is use of double quotes in "/$pattern/d". Variable won't work when we use single quotes.
You can also use this:
grep -v 'pattern' filename
Here -v will print only other than your pattern (that means invert match).
To get a inplace like result with grep you can do this:
echo "$(grep -v "pattern" filename)" >filename
I have made a small benchmark with a file which contains approximately 345 000 lines. The way with grep seems to be around 15 times faster than the sed method in this case.
I have tried both with and without the setting LC_ALL=C, it does not seem change the timings significantly. The search string (CDGA_00004.pdbqt.gz.tar) is somewhere in the middle of the file.
Here are the commands and the timings:
time sed -i "/CDGA_00004.pdbqt.gz.tar/d" /tmp/input.txt
real 0m0.711s
user 0m0.179s
sys 0m0.530s
time perl -ni -e 'print unless /CDGA_00004.pdbqt.gz.tar/' /tmp/input.txt
real 0m0.105s
user 0m0.088s
sys 0m0.016s
time (grep -v CDGA_00004.pdbqt.gz.tar /tmp/input.txt > /tmp/input.tmp; mv /tmp/input.tmp /tmp/input.txt )
real 0m0.046s
user 0m0.014s
sys 0m0.019s
Delete lines from all files that match the match
grep -rl 'text_to_search' . | xargs sed -i '/text_to_search/d'
SED:
'/James\|John/d'
-n '/James\|John/!p'
AWK:
'!/James|John/'
/James|John/ {next;} {print}
GREP:
-v 'James\|John'
perl -i -nle'/regexp/||print' file1 file2 file3
perl -i.bk -nle'/regexp/||print' file1 file2 file3
The first command edits the file(s) inplace (-i).
The second command does the same thing but keeps a copy or backup of the original file(s) by adding .bk to the file names (.bk can be changed to anything).
You can also delete a range of lines in a file.
For example to delete stored procedures in a SQL file.
sed '/CREATE PROCEDURE.*/,/END ;/d' sqllines.sql
This will remove all lines between CREATE PROCEDURE and END ;.
I have cleaned up many sql files withe this sed command.
echo -e "/thing_to_delete\ndd\033:x\n" | vim file_to_edit.txt
Just in case someone wants to do it for exact matches of strings, you can use the -w flag in grep - w for whole. That is, for example if you want to delete the lines that have number 11, but keep the lines with number 111:
-bash-4.1$ head file
1
11
111
-bash-4.1$ grep -v "11" file
1
-bash-4.1$ grep -w -v "11" file
1
111
It also works with the -f flag if you want to exclude several exact patterns at once. If "blacklist" is a file with several patterns on each line that you want to delete from "file":
grep -w -v -f blacklist file
to show the treated text in console
cat filename | sed '/text to remove/d'
to save treated text into a file
cat filename | sed '/text to remove/d' > newfile
to append treated text info an existing file
cat filename | sed '/text to remove/d' >> newfile
to treat already treated text, in this case remove more lines of what has been removed
cat filename | sed '/text to remove/d' | sed '/remove this too/d' | more
the | more will show text in chunks of one page at a time.
Curiously enough, the accepted answer does not actually answer the question directly. The question asks about using sed to replace a string, but the answer seems to presuppose knowledge of how to convert an arbitrary string into a regex.
Many programming language libraries have a function to perform such a transformation, e.g.
python: re.escape(STRING)
ruby: Regexp.escape(STRING)
java: Pattern.quote(STRING)
But how to do it on the command line?
Since this is a sed-oriented question, one approach would be to use sed itself:
sed 's/\([\[/({.*+^$?]\)/\\\1/g'
So given an arbitrary string $STRING we could write something like:
re=$(sed 's/\([\[({.*+^$?]\)/\\\1/g' <<< "$STRING")
sed "/$re/d" FILE
or as a one-liner:
sed "/$(sed 's/\([\[/({.*+^$?]\)/\\\1/g' <<< "$STRING")/d"
with variations as described elsewhere on this page.
cat filename | grep -v "pattern" > filename.1
mv filename.1 filename
You can use good old ed to edit a file in a similar fashion to the answer that uses ex. The big difference in this case is that ed takes its commands via standard input, not as command line arguments like ex can. When using it in a script, the usual way to accomodate this is to use printf to pipe commands to it:
printf "%s\n" "g/pattern/d" w | ed -s filename
or with a heredoc:
ed -s filename <<EOF
g/pattern/d
w
EOF
This solution is for doing the same operation on multiple file.
for file in *.txt; do grep -v "Matching Text" $file > temp_file.txt; mv temp_file.txt $file; done
I found most of the answers not useful for me, If you use vim I found this very easy and straightforward:
:g/<pattern>/d
Source
i am trying to remove some text from a file, i need to find the line number using a string and then remove from that line to the end of the file.
i tried using sed and outputting to a new file using a string as a search term but it does not keep the lines, it just prints the whole file on one line, which isnt helpful as the rest of the script relies on line numbers.
my code so far is:
file=$(sed -ie '/<div class="col-wrapper">/,$d' < file1.txt)
echo $file > file.txt
You can just use inline editing in sed:
sed -i '/<div class="col-wrapper">/,$d' file1.txt
to save changes to file1.txt
This might work for you (GNU sed):
sed -i '/<div class="col-wrapper">/Q' file1.txt
All of the lines with comments in a file begin with #. How can I delete all of the lines (and only those lines) which begin with #? Other lines containing #, but not at the beginning of the line should be ignored.
This can be done with a sed one-liner:
sed '/^#/d'
This says, "find all lines that start with # and delete them, leaving everything else."
I'm a little surprised nobody has suggested the most obvious solution:
grep -v '^#' filename
This solves the problem as stated.
But note that a common convention is for everything from a # to the end of a line to be treated as a comment:
sed 's/#.*$//' filename
though that treats, for example, a # character within a string literal as the beginning of a comment (which may or may not be relevant for your case) (and it leaves empty lines).
A line starting with arbitrary whitespace followed by # might also be treated as a comment:
grep -v '^ *#' filename
if whitespace is only spaces, or
grep -v '^[ ]#' filename
where the two spaces are actually a space followed by a literal tab character (type "control-v tab").
For all these commands, omit the filename argument to read from standard input (e.g., as part of a pipe).
The opposite of Raymond's solution:
sed -n '/^#/!p'
"don't print anything, except for lines that DON'T start with #"
you can directly edit your file with
sed -i '/^#/ d'
If you want also delete comment lines that start with some whitespace use
sed -i '/^\s*#/ d'
Usually, you want to keep the first line of your script, if it is a sha-bang, so sed should not delete lines starting with #!. also it should delete lines, that just contain only a hash but no text. put it all together:
sed -i '/^\s*\(#[^!].*\|#$\)/d'
To be conform with all sed variants you need to add a backup extension to the -i option:
sed -i.bak '/^\s*#/ d' $file
rm -Rf $file.bak
You can use the following for an awk solution -
awk '/^#/ {sub(/#.*/,"");getline;}1' inputfile
This answer builds upon the earlier answer by Keith.
egrep -v "^[[:blank:]]*#" should filter out comment lines.
egrep -v "^[[:blank:]]*(#|$)" should filter out both comments and empty lines, as is frequently useful.
For information about [:blank:] and other character classes, refer to https://en.wikipedia.org/wiki/Regular_expression#Character_classes.
If you want to delete from the file starting with a specific word, then do this:
grep -v '^pattern' currentFileName > newFileName && mv newFileName currentFileName
So we have removed all the lines starting with a pattern, writing the content into a new file, and then copy the content back into the source/current file.
You also might want to remove empty lines as well
sed -E '/(^$|^#)/d' inputfile
Delete all empty lines and also all lines starting with a # after any spaces:
sed -E '/^$|^\s*#/d' inputfile
For example, see the following 3 deleted lines (including just line numbers!):
1. # first comment
2.
3. # second comment
After testing the command above, you can use option -i to edit the input file in place.
Just this!
Here is it with a loop for all files with some extension:
ll -ltr *.filename_extension > list.lst
for i in $(cat list.lst | awk '{ print $8 }') # validate if it is the 8 column on ls
do
echo $i
sed -i '/^#/d' $i
done