I added this command to httpd_uwamp.conf :
#LOG ROTATION
TransferLog "|C:/UwAmp/bin/apache/bin/rotatelogs.exe C:/UwAmp/bin/apache/logs/backup/access-%Y_%m_%d.log 5M"
It works fine, but cmd window is always visible while Apache is on.
Does anyone know how to hide this cmd window ?
This happens to me too with my access logs. I couldn't figure out a solid solution but for now I hide it through the command line using this tool found here:
https://steve.fi/Software/windowhide/
I've used it on Windows 7 and Windows Server 2012
Credits go to Steve Kemp .. steve#steve.org.ku
Revisiting... You might want to check on what user profile your server is starting and make sure it's running as a service.
My rotatelogs windows finally cleared away when I ran my server applications as a service..
Under the Task Manager the username is now SYSTEM and no longer my user name.
With this modification, an "Interactive Services Detection" window would popup presenting the option to view the prompts from a self-contained screen.
I also modified the httpd.conf and moved my "CustomLog" and "ErrorLog" lines to the directives as they were outside, though I don't think it'll affect the outcome.
Related
I am using Windows 10 and whenever I try to copy paste some content in any folder, my system refreshes (reloaded) and file explorer window closed without executing the copy-pasting task. On right click on any folder, also refreshes the system and nothing happens.
To my knowledge, some Microsoft service is causing this issue, don't know which service. Any leads, please?
I tried to run the system on safe mode with basic services and it works fine. On the other hand, when I disable all the 3rd party services and restart the system with only Microsoft's services, the same issue again. that means there is some Microsft services which are causing the issue.
try to run Windows on safe mode, and enable one by one each service, spaced by tests, and if your poblem occur after enabling a service, I think you would find out wich service is causing your problem
And then, Google "(service name) problem copy paste Windows 10" and see if others have this problem
hope it help
How do you open IIS (Internet Information Services) Manager using Windows 10?
I have installed the developer preview of Windows 10 and can't seem to find IIS Manager? It is not in Control Panel > Administrative Tools.
When I browse to the
folder C:\Windows\System32\inetsrv
it is empty.
I did a full search of my hard drive to find inetmgr.exe and found three copies and none of them would open, when I tried to open them it says "This App cannot Run on your PC" To find a version of the App that works contact the publisher.
I know IIS works because I have ran local ASP.net apps through VisualStudio, but I can't seem to find any way to launch IIS Manager to do some configurations for a site.
Anyone know anything about this?
Thanks to #SLaks comment above I was able to turn on IIS and bring the manager back.
Press the Windows Key and type Windows Features, select the first entry Turn Windows Features On or Off.
Make sure the box next to IIS is checked.
If it is not checked, check it. This might take a few minutes, but this will install everything you need to use IIS.
When it is done, IIS should have returned to Control Panel > Administrative Tools
Under the windows feature list, make sure to check the IIS Management Console
You also need to check additional check boxes as shown below:
Actually you must make sure that the IIS Management Console feature is explicitly checked. On my win 10 pro I had to do it manually, checking the root only was not enough!
#user1664035 & #Attila Mika's suggestion worked. You have to navigate to Control Panel -> Programs And Features -> Turn Windows Features On or Off. And refer to the screenshot. You should check IIS Management console.
Run appwiz.cpl - brings up Programs and Features
Choose "Turn Windows Features On/Off"
Select the IIS Services you need
after turning IIS on (by going to Windows Features On/Off) type inetmgr in search bar or run
To install the IIS Management Console under Windows 10 using Powershell with RSAT installed:
Enable-WindowsOptionalFeature -Online -FeatureName IIS-ManagementConsole -All
Credit and thanks to Mikhail's comment above.
It most likely means that IIS Management Console was not installed, and modern Windows administrator/IT pro should be able to quickly check this by issuing this command:
Get-WindowsFeature *Web*
And if it is missing just quickly add this via the following command:
Add-WindowsFeature Web-Mgmt-Console
GUI options mentioned above are also valid (see answer from #Joe Wu) but PowerShell it is best way to do IT for IT Pro or let's put it as "if you have to do this slightly more often than once a year" :)
Press the Windows Key and type Windows Features, select the first entry Turn Windows Features On or Off.
Make sure the box next to IIS is checked. You good to go.
Launch Windows Features On/Off and select your IIS options for installation.
For custom site configuration, ensure IIS Management Console is marked for installation under Web Management Tools.
I arrived here because I was having the same issue.
If you are here and everything above didn't work, it's likely that you butchered your path somehow.
Go to System -> Advanced System Settings -> Advanced -> Environment Variables -> Machine or User and add the following entry to the end, or append to the existing, separating with a semi-colon:
C:\Windows\System32\inetsrv
After closing and opening your shell, you should now be able to access inetmgr from the command line.
I have just set up a Guest Windows 2008 R2 Standard Edition 64bit (VirtualBox on Windows 7 64 bit host) for some testing.
I have found that while "inside" the remote desktop environment (i.e. I remote onto the guest ip from the host) that copy and paste does not work. When I say "does not work" let me be explicit.
Assume I am logged onto the Win2008 machine via RDC
Nothing is in the copy/paste buffer. I can mouse click some text and then rclick copy. I can then right click and click "paste" but nothing happens. I can see the "choice" is enabled to paste bu nothing happens. The caret stays put.
CTRL+C / CTRL-V / CTRL-X does not work in RDC land
I am not talking about going in-between copy/paste RDC land/host land.
HERE is the double whammy: when I do the above it then "infects" my host pc so that copy paste is unavailable there too. if PRT SCR doesn't work any more.
I have tried:
restarting the guest os and host os
in group policy editor I have disabled "do not allow clip board redirection" ( I can't give you the full path to this copy/paste just broke again)
I have made sure that in RDC "options" for local resources include clipboard.
NB: if I don't touch RDC at all and log into the guest OS via the console copy paste works perfectly
Kill the rdpclip.exe process using the Task Manager. Then, create a new process named rdpclip.exe. This will solve your problem.
Follow these steps in Remote Machine.
Stop the rdpclip process
Open Task Manager.
Go to process tab and find rdpclip
Choose rdpclip and End that task.
Start rdpclip.exe
Go to start menu and open Run command
Open rdpclip.exe and click Ok button.
Copy paste should work now.
it appears this is a flaw with VirtualBox
these posts covers it
https://forums.virtualbox.org/viewtopic.php?f=6&t=44498 (read the last post)
https://github.com/FreeRDP/FreeRDP/issues/230
(In VirtualBox) SETTINGS->GENERAL->[Advanced]->Shared Clipboard {disabled}
There are multiple things to check.
Restarting rdpclip.exe is a worthy try if the copy/paste fails sporadically, meaning we might on a process in a previous session.
On the client side, we check the RDP Options. Click on the Show Options button in the bottom, pick the third tab Local Resources. Make sure Clipboard is checked.
On the remote server side, we want to check Remote Desktop Session Host Configuration (Win Server 2008+).
Double click the connection to open its Properties window.
In the tab named Client Settings, Make sure Clipboard is not disabled.
We need to log off from the remote desktop.
Workaround
Use an online shared text box like this one:
https://pastebin.com/
I have a lot of different servers that I connect to. Each time I connect to a new machine I go through the several mouse clicks to setup basic options for cmd.exe, such as QuickEdit mode and expanding the screen display and buffers. This article describes what I do pretty well (with my own settings, of course): http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/commandpromptoptions.mspx?mfr=true
This is annoying. I would like to run a quick configureCmd.cmd script upon login that will update all of these settings automatically such that when I open the cmd.exe it is already configured without any additional work on my part. Running the script on login is easy, but I do not know where these settings are stored. I figured the Registry, but my experiments do not show any difference in HKLM | HKCU \Software\Microsoft\Command Processor.
Console Windows are not part of the command processor, so it follows that their settings are separate. Take a look at
HKEY_CURRENT_USER\Console.
My operating system is Windows 7 32bit. I installed RedMon1.7, Ghostscript 8.71 and GSview 4.9; installations were successful.
I went to Add New Local Printer in Windows Devices and Printers, clicked on Create A New Port, and selected Redirected Port from the Type of Port list. Clicked Next and in the Add New Port window I named RPT1: and clicked OK but it says Specified port cannot be added. Operation could not be completed (error 0x00000001)
I tried giving different names to the port, RPT2:, RPT4:, VPport: etc but all gave same result. Disabled Windows Firewall and tried but it continues to give same error, Disabled the Antivirus (Avira) but no change.
What can be preventing windows 7 from adding redirected port?
BTW I was following instructions in this tutorial in order to create a postscript printer.
http://www.stat.tamu.edu/~henrik/GSPSprinter/GSPSprinter.html
Appreciate any ideas or suggestions. Thanks
Run cmd.exe as Administrator and then run:
rundll32 printui.dll,PrintUIEntry /il
from the elevated cmd.
Go to your Start Menu,
Type Print,
Right-Click "Print Management",
Select "Run as administrator",
In Print Management; Expand "Print Servers" and Select "Ports".
Right-Click in the "Ports" pane (on the right hand side) and Select "Add Port...".
I'd also recommend configuring a Port from Print Management, as opposed to trying to do it in a Printers Properties. ;)
Adam Reed describes a workaround in his blog:
http://borntoidentify.blogspot.com/2010/09/configuring-virtual-printer-using.html
Not very comfortable, but works for me ...
EDIT: This link appears broken, but here's the content:
https://web.archive.org/web/20120628120209/http://borntoidentify.blogspot.com/2010/09/configuring-virtual-printer-using.html
The gist is that under Win7, you need to run explorer with elevated rights. This can be done using another browser, or, as mentioned in the comments on the original post:
Open a CMD window by right clicking and running as administrator
Kill the process explorer.exe from the task manager
Run explorer.exe from the command prompt window, now as an administrator.
Be very careful when running explorer as an administrator.
You need to enable Admin mode OR log with the Admin account!
This is cause by the new Vista/Win 7 security system.
Try reseting the firewall (Windows 7)
(be warned tho, the firewall will reset to the default setting)
*go to Control Panel
*go to Windows Firewall
*on the left choice pick "Restore Defaults"
It works for me, i hope it works for you.
F3lix's rundll32 method works but after you've created the port you most probably would need to configure its settings. Elsewhere in the net there are instructions to open Port management as Administrator, but in Windows 7 Home that seems to be very much impossible. One can only view the virtual port settings. The only workaround I found is to edit registry directly with the Registry editor at
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\Redirected Port\Ports\RPT1:
(Replace your port name in the end.)
It seams to be tricky. In my case it only works, after creating an new User account with the name "admin" / group " Administratoren" (de).
Before with my real Nickname User "Nick.." / group "Administratoren" (de) it dosent work´.
Takes several hours to discover ...
Accepted solution did not work for me...I found an other command line that worked well (I'm on windows 10):
%systemroot%\system32\printmanagement.msc
It opens the print management in administrator mode, and I was able to create the port with no problems.