I'm currently testing HP LoadRunner 12.53 with Oracle EBS R12.2.5.
I created a simple script using both Oracle Apps, and Oracle NCA + Http protocol (Log in, bring up a form and close/log out) and replayed but run into below error. (same error for both scripts)
nca_connect_server: cannot communicate with host
icx_ticket is correlated and works OK as it is picked and replaced in the parameter.
No need to correlate JSessionIDForms as EBS is running on socket mode.
It is s just simple script with single correlation but can't find any clue for the error.
What could be the root cause of the error?
Where should I look at for a clue? How to make the error / log more verbose and detailed
Thanks in advance
Record it twice. If the value shifts, then correlate it.
Please ensure that you have properly set up the environment before recording, Below steps need to be taken for setting up the environment
1.Set "record = names" flag for specific user profile in Oracle EBS Application** via administrator login (search google how to achieve this or simply ask your application team to do it for you)
2.Run Time Settings and Default.cfg file changes
Run Time Settings
Keep the below values to high limit to avoid replay timeout errors
Run-Time Settings > Internet Protocol >Preferences > Options>
Step Download Limit
HTTP-request connect timeout:
HTTP-receive receive timeout:
Keep-Alive timeout:
Run-Time Settings >Browser>Browser Emulation>
1) Simulate a new user on each iteration – checked
3. default.cfg file inside script directory
"RelativeURL={NCAJServSessionId}" statement in the default.cfg file rolls back each time we run the script so we need to check that it is
/forms/lservlet;JsessionIDForms={NCAJServSessionId} -- R12 Version or
/forms/formservlet?JServSessionIdforms={NCAJServSessionId} -- EBS 11
i Version
4. Correlation - Last but not the least
Ensure correct correlation of each and every parameter, The best way to achieve this is by recording the script 2 times and comparing them using a suitable tool, Correlate each value which might be changing each time you replay the script
Note :- The Oracle EBS is not fully supported by Loadrunner please download the loadrunner compatability matrix and check if your version is supported by Loadrunner.
Related
I am using jmeter to test at my dev server.
The Scenario is like This.
0. Turn OFF all firewalls both local PC(so called, HOST) and client PC(so called, CLIENT)
Turn on Jmeter at my HOST
--> add Thread Group, bzm-Parellel Controller. I am not certain at this point
Connect to CLIENT (once)
-> maybe, by SSH Command or REMOTE Start
execute my test script at CLIENT (several times, more than 100 times)
-> such as, 'ls' 'pwd' 'mkdir dir123' 'ls' IN A ROW!!
-> maybe, by OS Process Sampler. I am not certain at this point
get result of (3) at my HOST jmeter by View Results Tree
This is the scenario that I Thought
Can anyone help me with this issue.
Cuz, there's too many Samplers and less information, I'm suffering such a tough moments.
Thank you for reading.
Turning off firewall is not the best idea, just open the port you will be using, default port for SSH is 22 and normally it's getting opened more or less automatically when you install OpenSSH server
I don't think you need Parallel Controller, it has very specific use cases like simulating AJAX requests, it will be sufficient to specify the desired number of users/loops/test duration on Thread Group level
Remote start is for JMeter distributed testing, if you want to run a shell command on the client use OS Process Sampler or SSH Command sampler, see How to Run External Commands and Programs Locally and Remotely from JMeter article for more details.
The same is for point 2, if you need to create a directory depending on your HOST and CLIENT operating systems you need to choose one of the aforementioned samplers. Just be aware that only first operation/iteration succeeds, all the subsequent attempts you will get cannot create directory ‘dir123’: File exists. I'm also not certain what you're trying to test here? SSH server performance? Operating system performance? Network performance?
If you add View Results Tree listener to your Test Plan and run your test in GUI mode it will automatically catch all the Samplers results
I’m doing a performance test using Jmeter and during the test I’m collecting the statistics for backend server performance , for this purpose I use SSHMON sample collector listener in my test plan
https://github.com/tilln/jmeter-sshmon
I have also configured a CSV file path to check the response data received from the server
Issue is that
Data is not recorded in the CSV file and also there is no graph shown for SSHMON listener
In the jemeter logs I can see the following error
java.text.ParseException: Unparseable number: " [2J"
at java.text.NumberFormat.parse(NumberFormat.java:434) ~[?:?]
at nz.co.breakpoint.jmeter.vizualizers.sshmon.SSHMonSampler.generateSamples(SSHMonSampler.java:86) [jmeter-sshmon-1.2.jar:?]
at kg.apc.jmeter.vizualizers.MonitoringResultsCollector.processConnectors(MonitoringResultsCollector.java:215) [jmeter-plugins-cmn-jmeter-0.6.jar:?]
at kg.apc.jmeter.vizualizers.MonitoringResultsCollector.run(MonitoringResultsCollector.java:122) [jmeter-plugins-cmn-jmeter-0.6.jar:?]
at java.lang.Thread.run(Thread.java:832) [?:?]
To verify the SSH configuration and the received data format , I tried to make a SSH connection to the backend server using putty and with same user/pwd and command , I get the data in Putty , please see the attached screenshot
Do I have to change the powershell script to change the format of CPU data, if yes then in which format?
I did not get any info on plugin page.
I would really appreciate if you could provide me some help for this case.
The reason for this issue appears to be related to the terminal control sequence sent
as output of the remote Powershell server application back to the local client,
i.e. the JMeter plugin vs. the Powershell command line.
The characters [2J would be the "Erase in Display" sequence (refer ANSI Escape Codes, e.g. https://en.wikipedia.org/wiki/ANSI_escape_code#CSI_sequences).
In one case those characters would presumably be interpreted by the terminal application displaying the output (e.g. Putty or Cmd window) and the output looks correct.
In the other case however, the control sequence characters are received by the plugin and rejected as unparsable number.
A very similar issue has been reported on the JMeter-Plugins Google Group.
The version 1.3 of the SSHMon plugin uses a different SSH client library which seems to fix the issue according to feedback on the Google Groups thread.
Recommended solution: Upgrade to version 1.3 or later.
Disclaimer: I'm the author of the JMeter SSHMon plugin.
Following parameters should be set for OBIEE Presentation Server only during load testing.
OBIPS\instanceconfig.xml
save and exit file Restart OBIEE processes using OBIEE EM console.
<ServerInstance>
[...]
<Cursors>
<NewCursorWaitSeconds>36000</NewCursorWaitSeconds>
<OldCursorWaitSeconds>36000</OldCursorWaitSeconds>
</Cursors>
[...]
</ServerInstance>
You do know that this represents a value of 10 hours, correct? You are willing to lock resources for that length of time? This is counterintuitive for optimal application performance as you would seek to recover resources as fast as possible to support more sessions versus locking a resource for an extended period of time.
I refer to the following performance "compass rose" as a guiding item (independent of tool)
If you need to amend the file on a remote server you can do this either via OS Process Sampler or via SSH Command Sampler. The first one is a part of JMeter installation, the second one you can install using JMeter Plugins Manager
See How to Run External Commands and Programs Locally and Remotely from JMeter for more information, example configuration and sample commands.
I have installed OEM 13c and deployed a couple of agents and want to test out the Log File Monitoring utility. I have enabled it and added a log file to monitor.
When I go and test it out, it does not show any alerts when they are put into the Log File. On the agent server, I have tailed the file and see the messages coming into the log file.
Does anyone have experience adding log files to OEM? I could have configured it wrong. Or is there any troubleshooting steps that I can follow to see if the server is even contacting the agent for reading the log file. Status of the agent is good with no incidents.
Without access to the system, it would be difficult to tell you the exact cause of this issue. However, I can list a few potential causes of this issue that I have experienced personally:
Permissions. The Oracle Enterprise Manager Agent is very convoluted when it comes to system permissions within a remote server. The agent can be owned and run as any number of users but during metric evaluation, may also need sudo or pam-authentication permissions to access certain entities on the server. Depending on the authentication profiles on that server, this could be the cause of your issue. There are ways to grant the agent access through the PAM stack if that is necessary.
Syntax. The wildcard syntax in the OEM GUI can be a little confusing as well. I would play with the wildcard elements a bit on the "String" component to ensure that it isn't as simple as adding wildcards to the beginning and end of the string. Without diving into the binaries of the agent plugins, it is difficult to assess exactly how the agent is evaluating this particular metric
One suggestion I would have is to go through the agent commands. There are specific commands you can run to manually force an agent to evaluate a particular metric for a particular target. This can allow you to manually trigger the metric collection locally on the server and evaluate what exactly is being performed at the agent level.
On the system I was running (12c) the command was as follows:
emctl control agent runCollection <hostname>:host host_storage
Ok so I set up my JMeter to run remotely using one slave computer (possibly more to come), and it's working out for the most part EXCEPT that I can't fetch the response time over time-graphs function using the JMeter plugin. I'm still able to use the "PerfMon Metrics" tool to get the CPU/Memory values from the slave computer, so I don't understand how I'm not able to get the response time results.
Does anyone have any experience using that function?
I would check the master- slave configuration: be sure that
the same Jmeter release is used
same directory tree structure is used
Jmeter-plugins are installed on both systems
...
If you use a standard "Summary report" listener, and save data to a file in the master, then you can reload and analyse the data off line with any listener.
HTH