I am trying to use Web Service Task in SSIS/SSDT to use our company's Web Service. However I am getting this error: "The error is: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel..". I have installed the certificate to Trusted Root Certificates Authorities but I am still getting that error. I speculate that the issue stems from a mismatch name. Where the domain name does not match the name on the certificate I installed. Is there a solution for this or can I have SSIS/SSDT to ignore this certificate error?
Related
THIS IS STILL AN ISSUE ANY HELP WOULD BE APPRETIATED
I am having an issue setting up TLS through a custom CA between Kibana and Enterprise search. I have the default x-pack security set up for the interconnection of my Elasticsearch nodes with both Kibana and Enterprise search, which was done according to the following docs: minimal security basic security ssl/tls config. I can successfully run Enterprise search through http, however my issue arises when I enable ssl/tls for ent-search..
When I have https configured for ent-search using this doc, the server is "running", however I receive an error after boot and Kibana throws an error when attempting to connect.
ent-search error (non corresponding with Kibana's hit to the ent-search hostname, this error raises shortly after ent-search is "starting successfully", but isn't fatal)
[2022-06-14T20:37:45.734+00:00][6081][4496][cron-Work::Cron::SendTelemetry][ERROR]: Exception:
Exception while performing Work::Cron::SendTelemetry.perform()!: Faraday::ClientError: PKIX path
building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid
certification path to requested target
Kibana error (directly corresponding to when I ping http://obfuscated-dns:5601/app/enterprise_search/overview)
[2022-06-14T20:43:51.772+00:00][ERROR][plugins.enterpriseSearch] Could not perform access check to
Enterprise Search: FetchError: request to https://obfuscated-dns:3002/api/ent/v2/internal/client_config
failed, reason: unable to get issuer certificate
The steps I took to generate said certificate were: I created a csr on my server using elasticsearch-certutil csr along with a yml file which specified the distinguished name, I sent the unzipped csr to my CA (Digicert), uploaded the signed certificate and intermediate certificate provided by Digicert to my server, used openssl to generate a keystore using the signed cert and that private key generated along-side the original csr, then finally converted the keystore to .jks format using keytool.
From my understanding, the path of this keystore is what is needed for the configuration file for enterprise-search and the intermediary cert is what is used in the Kibana certificate authority config field (ca.pem). I have also tried to stuff both the signed and intermediate cert in the same .pem, as well as the private-key, signed and intermediate cert. Below are the relevant configurations:
kibana.yml
enterpriseSearch.host: https://ofuscated-dns:3002
enterpriseSearch.ssl.verificationMode: certificate
enterpriseSearch.ssl.certificateAuthorities:
- /path/ca.pem
enterprise-search.yml
ent_search.external_url: https://obfuscated-dns:3002
ent_search.listen_host: 0.0.0.0
ent_search.listen_port: 3002
ent_search.ssl.enabled: true
ent_search.ssl.keystore.path: "/path/keystore.jks"
ent_search.ssl.keystore.password: "pass"
ent_search.ssl.keystore.key_password: "pass"
I'm starting to feel like I fundamentally misunderstand something here. A lot of the jargon behind SSL/TLS certificates seems to lack standardization. While we are at it, what is a root cert in relation to what I have listed? Is it the intermediate cert? I see there is a master "root certificate" for the Digicert CN I certified under, however I'm unsure where this fits in. The config variable "certificateAuthorities" doesn't document what this .pem file should contain specifically and when searched the concept of a certificate authority is never associated with file contents, but instead is simply abstracted to the entity which provides certification (duh).
To put it succinctly: What does this variable "certificateAuthorities" explicitly entail?
UPDATE 09/28/2022
I have now confirmed that SSL is working when calling enterprise-search outside of the VM its running in. I can utilize its endpoint with my flutter and react app, however Kibana is till throwing the error mentioned above. I have checked that the root/intermediate CA provided to kibana's configuration is indeed the certificate linked with the signed cert provided to enterprise search and even confirmed so using SSLPoke.. This leaves me with the suspicion that perhaps Java is a bad actor in the mix? I've added the root/intermediate CA to the cacerts keystore in the ssl/java directory of the Linux VM, but still no luck. Any thoughts?
I was following the steps for Domain Verification:
https://help.apple.com/developer-account/#/dev1731126fb?sub=dev21822a6b0
I uploaded the file to my domain, and checked it's accessible securely:
https://can-la.com/.well-known/apple-developer-merchantid-domain-association.txt
However, when I do the verification on my Apple Developer account, I get the error:
Verification failed for domain
Unable to establish a secure connection to 'https://can-la.com/.well-known/apple-developer-merchantid-domain-association.txt'. Domain certificate is untrusted.
How come, and how can I solve this?
(Not sure if this is the same problem as Can't verify my domain for Apple Pay implementation.)
We are able to call web service from postman or custom request generator. However, while connecting using IBM Integration bus we are getting below exception. Can some one help with this error.
Exception below:
"Web Service request has detected a SOCKET error whilst invoking a web
service located at host &1, on port &2, on path &3."
"javax.net.ssl.SSLHandshakeException: com.ibm.jsse2.util.j: PKIX path
building failed: java.security.cert.CertPathBuilderException:
PKIXCertPathBuilderImpl could not build a valid CertPath.; internal
cause is: java.security.cert.CertPathValidatorException: The
certificate issued by CN=VeriSign Universal Root Certification
Authority, OU="(c) 2008 VeriSign, Inc. - For authorized use only",
OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US is not trusted;
internal cause is: java.security.cert.CertPathValidatorException:
Certificate chaining error"
To resolve this problem, you should add the certificate into your trust store.
To setup the truststore on broker :
https://www.ibm.com/support/knowledgecenter/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ac56640_.htm
To retrieve the certificate of the service you are calling, you can ask for it to your contact, or you can just go to the ?wsdl page and directly save the certificate from chrome
PS : If it works for other tools, it is simply because IIB refuse all the untrusted connexions by default, while some other tool allow it.
I am trying to create a bot on my server running 10.9, and I keep getting the following error:
Bot creation failed with error: An SSL error has occurred and a secure
connection to the server cannot be made.
I just updated my SSL cert from the self signed to one from GoDaddy. My https://servername connects fine with a green https.
How do I get it to recognize my certificate?
I never was able to find a solution. I ended up doing a clean install, add my GoDaddy SSL certificates again, and the problem was resolved.
I'm having a Windows Store App (Metro App) which I want to connect a web service I built through HTTPS. And I am using a self-signed certificate for my web service. But when I tried to connect it from my App through System.Net.HttpClient.PostAsync I got an exception said
"The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel."
Inner exception said
"The remote certificate is invalid according to the validation procedure."
I know this is because I'm using a self-signed certificate. I remembered in .NET I can use System.Net.ServicePointManager.ServerCertificateValidationCallback so that my application can pass the validation if the thumbprint is mine.
But I cannot find the relevant class/method in Windows Store runtime. How can I do that?
First, you should ideally be using Windows.Web.HttpClient. On that API, you can use httpClient.HttpBaseProtocolFilter.IgnorableServerCertificateErrors to set the cert errors that you're willing to accept. You can choose to ignore the Untrusted error, for example, but you should then manually check the thumbprint before actually sending any data.