combineAll does not emit on empty array - rxjs

JSBIN Sample
I have a changeable set of child components (POJO object) that each have its own state stream. Each time a user triggers addChild/removeChild/clearChildren, a new set of children state streams is emitted with #switchMap. So far so good! (And so amazed by RxJS!)
With Rx.Observable.from(arrayOfStateStreams).combineAll() I get a good result as long as the arrayOfStateStreams isn't an empty array.
Since this is a partial state that is combined(Latest) on a higher level, I need to get an empty array emitted or the global state tree will contain old state data that is no longer true!
I can emit some reserved token like ['EMPTY-ARRAY-PLACEHOLDER-TOKEN'], but that's just weird.
A better way would be to always append one last stream into the array so the last index can be considered trash. Still confusing code and state though.
Using [null] is not OK, since we could have a child state of 'null'.
Anyone who can solve this in a good way? Can't this be supported since there should be no other representation of an empty array after #combineAll?

Credits go to github user trxcllnt who provided the following answer:
combineAll won't emit unless the combined Observables emit at least
one value, but you could check to ensure the collection you're
combining is empty or not, and either combine or emit an empty Array:
var arrayOfStreamsStream = Rx.Observable
.of(
[], [
Rx.Observable.of('blah-1'), // component state.
Rx.Observable.of('blah-2'),
Rx.Observable.of('blah-3')
], [], [
Rx.Observable.of('foo-1'),
Rx.Observable.of('qux-2')
]
)
.switchMap(function onMap(coll) {
return coll.length === 0 ?
Observable.of(coll) :
Observable.combineLatest(...coll);
})
.subscribe(function onSubscribe(data) {
console.log('onSubscribe START')
console.dir(data)
console.log('onSubscribe END')
})

This has nothing to do with combineAll. The problem is that Observable.from results in nothing (an empty observable) when passed an empty array.
The only viable solution that I can think of if you have to get a result from an empty array is to return something else in that case.
Ann example to illustrate the problem and a possible solution.
var data = [1, 2, 3, 4, 5];
log('With data: ');
Rx.Observable.from(data)
.subscribe(function (d) { log('data: ' + d); });
// Prints:
// With data:
// data: 1
// data: 2
// data: 3
// data: 4
// data: 5
var data = [];
log('Without data: ');
var nullDataObject = { msg: 'my null data object' };
Rx.Observable.from(data.length == 0 ? [nullDataObject] : data)
.subscribe(function (d) { log('data: ' + d); });
// Prints:
// With data:
// data: [object Object]
Runnable example on jsfiddle.
When consuming this you simply filter away the object representing an empty array where appropriate.

a possible workaround is to just pipe it with startWith();
combineLatest(potentiallyEmptyArray).pipe(
startWith<any>([])
);

Note: Similar issues exist with combineLatest() (the static version) which can be solved using defaultIfEmpty() - which works, but it screws up the typing of the output.
// array of Observables
const animals: Observable<{ species: 'dog' | 'cat' }>[] = [];
// Type '{ species: "dog" | "cat"; }[]' is not assignable to type 'never[]'.
combineLatest(animals).pipe(defaultIfEmpty([]));
In TypeScript you need to either know the type of the object or use <any>[] which means you then lose typing completely.
If you have a concrete type you can use one of these:
defaultIfEmpty<Animal[]>([])
defaultIfEmpty([] as Animal[])
I often don't have a concrete type for the return value of an observable. So I came up with an operator:
export const emptyArrayIfEmpty = () => <T>(observable: Observable<T[]>) =>
observable.pipe(defaultIfEmpty([] as T[]));
Then I can add the following and get out an empty array if animals === [] without losing any typing information:
combineLatest(animals).pipe(emptyArrayIfEmpty());

Related

Should we avoid nested rxjs operators? One case which I cannot test

I have written the following effect in my Angular app which uses rxjs. On MyActions.myAction, I receive an object containing a property ids - an array of ids - and for each id I want to send an HTTP request via this.myApiService.getResource, which returns an Observable<Resource>. I want then to collect all results in an array, and dispatch another action passing the array.
public loadResources$: Observable<MyAction> = this.actions$.pipe(
ofType(MyActions.myAction),
switchMap(({ ids }) => from(ids).pipe(
mergeMap(id => this.myApiService.getResource(id)),
toArray()
)),
map(resources) => MyActions.resourcesLoaded({ resources } )),
);
The code above does the job, but I wonder whether I should avoid nesting two flows of reactive operators, and whether there is a better way to write that.
The reason I wonder that is that I am having problems writing a test for it. I wrote the test below but I cannot make it pass.
it('should dispatch an resourcesLoaded action with the resources', () => {
const ids = ['5f7c723832758b859bd8f866'];
const resources = [{} as Resource];
const values = {
l: MyActions.loadResources({ ids }),
t: ids[0],
o: MyActions.resourcesLoaded({ resources })
};
actions = hot('--l------------', values);
const get$ = cold(' -------t-----', values);
const expected = cold('---------o-----', values);
myApiService.getResource.withArgs(ids[0]).returns(get$);
expect(myEffects.loadResources$).toBeObservable(expected);
});
The error I get is:
Expected $.length = 0 to equal 1.
Expected $[0] = undefined to equal Object({ frame: 50, notification: Notification({ kind: 'N', value: { ....
Error: Expected $.length = 0 to equal 1.
Expected $[0] = undefined to equal Object({ frame: 50, notification: Notification({ kind: 'N', value: { ....
at <Jasmine>
at compare (http://localhost:9876/Users/jacopolanzoni/Documents/Development/myProject/node_modules/jasmine-marbles/index.js:91:1)
at <Jasmine>
but I wonder whether I should avoid nesting two flows of reactive operators, and whether there is a better way to write that
I'd say it depends on what you want to achieve, at least in this case.
of([1,2,3]).pipe(mergeAll(), switchMap(value => http.get(...)))
differs from
of([1,2,3]).pipe(switchMap(ids => from(ids).pipe(mergeMap(...))))
In the first scenario, each inner observable will be discarded by the next value(except for the last value), so only 3 will resolve.
In the second scenario, it will process all of them, because you explode the array in the inner observable(which is managed by swtichMap, so the only way its inner observable will be discarded is if a new outer value(e.g another array of ids) is emitted by the source).
A case where nesting is not necessary is:
of([1,2,3])
.pipe(
// whenever you want to explode an array,
// it does not matter which higher order operator you use
// since the operation is **synchronous**
// so, `mergeAll`, `concatAll`, `switchAll` should work the same
mergeAll(),
mergeAll(id => this.apiService.useId(id))
)
// same as
of([1,2,3])
.pipe(
mergeMap(ids => from(ids).pipe(mergeMap(id => this.apiService.useId(id))))
)
As you can see, in this case, switchMap has been replaced with mergeMap.
I have found out my test was failing because toArray was waiting for the observable returned by getResource (i.e., httpClient.get) to complete. Replacing t with (t|) fixes the test:
it('should dispatch an resourcesLoaded action with the resources', () => {
const ids = ['5f7c723832758b859bd8f866'];
const resources = [{} as Resource];
const values = {
l: MyActions.loadResources({ ids }),
t: ids[0],
o: MyActions.resourcesLoaded({ resources })
};
actions = hot('--l------------', values);
const get$ = cold(' -------(t|)-----', values);
const expected = cold('---------o-----', values);
myApiService.getResource.withArgs(ids[0]).returns(get$);
expect(myEffects.loadResources$).toBeObservable(expected);
});
Yet, the first part of my question, i.e. whether it's good practice or not to nest operators like that, still stands.

RxJS observable which emits both previous and current value starting from first emission

I have a BehaviorSubject which emits JavaScript objects periodically. I want to construct another observable which will emit both previous and current values of the underlying observable in order to compare two objects and determine the delta.
The pairwise() or bufferCount(2, 1) operators are looking like a good fit, but they start emitting only after buffer is filled, but I require this observable to start emitting from the first event of the underlying observable.
subject.someBufferingOperator()
.subscribe([previousValue, currentValue] => {
/** Do something */
})
;
On first emission the previousValue could be just null.
Is there some built-in operators that I can use to achieve the desired result?
Actually, it was as easy as pairing pairwise() with startWith() operators:
subject
.startWith(null) // emitting first empty value to fill-in the buffer
.pairwise()
.subscribe([previousValue, currentValue] => {
if (null === previousValue) {
console.log('Probably first emission...');
}
})
;
Here's a simple operator:
function withPreviousItem<T>(): OperatorFunction<
T,
{
previous?: T;
current: T;
}
> {
return pipe(
startWith(undefined),
pairwise(),
map(([previous, current]) => ({
previous,
current: current!
}))
);
}
The nice thing about this is that the result has meaningful property names and correct types:
previous is T | undefined
current is T (not T | null)
Stackblitz example
Here's the snippet for rxjs 6+
subject
.pipe(
startWith(undefined),
pairwise()
)
.subscribe(([previousValue, currentValue]) => {
/** Do something */
});
The value in startWith() should be undefined because there is no value. Typically null is defined as "we have a value and this value is empty".
scan (RX equivalent of a reduce) is an option here:
subject
.scan((accumulator, currentValue) => {
const previousValue = ...accumulator.slice(-1);
return [previousValue, currentValue];
}, [null]) // emitting first empty value to fill-in the buffer
.subscribe(([previousValue, currentValue]) => {
// ...
});
This can be extended to a more general case when you want to look at more than two items.

Get last emitted object from multiple sources

To be more specific, I don't want an array of emitted object. I want the last object emitted by either source.
Currently, it's working like this
.withLatestFrom(subject1, subject2)
.switchMap([val1, val2]) => {...}
What I want is
.withLatestFrom(subject1, subject2)
.switchMap(latestVal) => {...}
To avoid a possible x=y problem. What I have is two subjects. Subject1 and Subject2.
If subject2 has emitted any values, that value will always trump subject1. In my use case once subject 2 has started emitted, this particular module will ignore subject 1. But subject 1 will be used elsewhere.
But I want a way to feed these two subjects as sources and either get the last emitted value, or the last value of subject 2 if it's not null. If subject 2 is null then get the last value from subject 1.
Here is an example that I think does what you are looking for:
const first = Rx.Observable.interval(1000).map(x => `first (${x})`);
const second = Rx.Observable.interval(2000).map(x => `second (${x})`);
Rx.Observable.merge(
first.takeUntil(second),
second
)
.subscribe(
x => { console.log('next: ', x); },
null,
() => { console.log('complete'); }
);
<script src="https://cdnjs.cloudflare.com/ajax/libs/rxjs/5.5.5/Rx.min.js"></script>
The takeUntil will cause the "first" observable to stop emitting values for this subscription the first time the "second" observable emits.

RxJS: Removing fields from an object

Lets say I have an object with 4 fields like this:
obj = {a:"3", b:"7", c:"10", d:"123"}
and I need to 'narrow' it to an object with fewer fields, like that:
newObj = {a:"3", c:"10"}
I know this can be done by deleting the fields (ie. delete obj.b )
My question is, can this be done with RxJS? And if yes, how???
Thanks a lot!
You if you have an Observable, that emits the shape above, you can do something like this:
Rx.Observable.of({ a:"3", b:"7", c:"10", d:"123" })
.map(({ a, c }) => ({ a, c }))
In the mapping function I destructure the object, then create an object literal with the shorthand syntax. Mind that these are es6/7 features.
But you really don't need rxjs or Observables to do this:
const original = { a:"3", b:"7", c:"10", d:"123" }
const changed = { a: original.a, c: original.c }
If you want to remove specific fields from the object (or stream of objects), rather than keeping specific ones, then you can use the following operator:
const removeFieldsOp = (props)=>obs=>obs.pipe(map(({...o})=>
(props.forEach(prop=>delete o[prop]), o)));
of({ a:"3", b:"7", c:"10", d:"123" }).pipe(removeFieldsOp(['b','d']))
.subscribe(console.log);
//{ a: '3', c: '10' }

Have withLatestFrom wait until all sources have produced one value

I'm making use of the withLatestFrom operator in RxJS in the normal way:
var combined = source1.withLatestFrom(source2, source3);
...to actively collect the most recent emission from source2 and source3 and to emit all three value only when source1 emits.
But I cannot guarantee that source2 or source3 will have produced values before source1 produces a value. Instead I need to wait until all three sources produce at least one value each before letting withLatestFrom do its thing.
The contract needs to be: if source1 emits then combined will always eventually emit when the other sources finally produce. If source1 emits multiple times while waiting for the other sources we can use the latest value and discard the previous values. Edit: as a marble diagram:
--1------------2---- (source)
----a-----b--------- (other1)
------x-----y------- (other2)
------1ax------2by--
--1------------2---- (source)
------a---b--------- (other1)
--x---------y------- (other2)
------1ax------2by--
------1--------2---- (source)
----a-----b--------- (other1)
--x---------y------- (other2)
------1ax------2by--
I can make a custom operator for this, but I want to make sure I'm not missing an obvious way to do this using the vanilla operators. It feels almost like I want combineLatest for the initial emit and then to switch to withLatestFrom from then on but I haven't been able to figure out how to do that.
Edit: Full code example from final solution:
var Dispatcher = new Rx.Subject();
var source1 = Dispatcher.filter(x => x === 'foo');
var source2 = Dispatcher.filter(x => x === 'bar');
var source3 = Dispatcher.filter(x => x === 'baz');
var combined = source1.publish(function(s1) {
return source2.publish(function(s2) {
return source3.publish(function(s3) {
var cL = s1.combineLatest(s2, s3).take(1).do(() => console.log('cL'));
var wLF = s1.skip(1).withLatestFrom(s2, s3).do(() => console.log('wLF'));
return Rx.Observable.merge(cL, wLF);
});
});
});
var sub1 = combined.subscribe(x => console.log('x', x));
// These can arrive in any order
// and we can get multiple values from any one.
Dispatcher.onNext('foo');
Dispatcher.onNext('bar');
Dispatcher.onNext('foo');
Dispatcher.onNext('baz');
// combineLatest triggers once we have all values.
// cL
// x ["foo", "bar", "baz"]
// withLatestFrom takes over from there.
Dispatcher.onNext('foo');
Dispatcher.onNext('bar');
Dispatcher.onNext('foo');
// wLF
// x ["foo", "bar", "baz"]
// wLF
// x ["foo", "bar", "baz"]
I think the answer is more or less as you described, let the first value be a combineLatest, then switch to withLatestFrom. My JS is hazy, but I think it would look something like this:
var selector = function(x,y,z) {};
var combined = Rx.Observable.concat(
source1.combineLatest(source2, source3, selector).take(1),
source1.withLatestFrom(source2, source3, selector)
);
You should probably use publish to avoid multiple subscriptions, so that would look like this:
var combined = source1.publish(function(s1)
{
return source2.publish(function(s2)
{
return source3.publish(function(s3)
{
return Rx.Observable.concat(
s1.combineLatest(s2, s3, selector).take(1),
s1.withLatestFrom(s2, s3, selector)
);
});
});
});
or using arrow functions...
var combined = source1.publish(s1 => source2.publish(s2 => source3.publish(s3 =>
Rx.Observable.concat(
s1.combineLatest(s2, s3, selector).take(1),
s1.withLatestFrom(s2, s3, selector)
)
)));
EDIT:
I see the problem with concat, the withLatestFrom isn't getting the values. I think the following would work:
var combined = source1.publish(s1 => source2.publish(s2 => source3.publish(s3 =>
Rx.Observable.merge(
s1.combineLatest(s2, s3, selector).take(1),
s1.skip(1).withLatestFrom(s2, s3, selector)
)
)));
...so take one value using combineLatest, then get the rest using withLatestFrom.
I wasn't quite satisfied with the accepted answer, so I ended up finding another solution. Many ways to skin a cat!
My use-case involves just two streams - a "requests" stream and a "tokens" stream. I want requests to fire as soon as they are received, using the whatever the latest token is. If there is no token yet, then it should wait until the first token appears, and then fire off all the pending requests.
I wasn't quite satisfied with the accepted answer, so I ended up finding another solution. Essentially I split the request stream into two parts - before and after first token arrives. I buffer the first part, and then re-release everything in one go once I know that the token stream is non-empty.
const first = token$.first()
Rx.Observable.merge(
request$.buffer(first).mergeAll(),
request$.skipUntil(first)
)
.withLatestFrom(token$)
See it live here: https://rxviz.com/v/VOK2GEoX
For RxJs 7:
const first = token$.first()
merge(
request$.pipe(
buffer(first),
mergeAll()
),
request$.pipe(
skipUntil(first)
)
).pipe(
withLatestFrom(token$)
)
I had similar requirements but for just 2 observables.
I ended up using switchMap+first:
observable1
.switchMap(() => observable2.first(), (a, b) => [a, b])
.subscribe(([a, b]) => {...}));
So it:
waits until both observables emit some value
pulls the value from second observable only if the first one has changed (unlike combineLatest)
doesn't hang subscribed on second observable (because of .first())
In my case, second observable is a ReplaySubject. I'm not sure if it will work with other observable types.
I think that:
flatMap would probably work too
it might be possible to extend this approach to handle more than 2 observables
I was surprised that withLatestFrom will not wait on second observable.
In my mind, the most elegant way to achieve the different behavior of an existing RxJS operator is to wrap it into a custom operator. So that from the outside it looks just like any regular operator and doesn't require you to restructure your code each time you need this behavior.
Here is how you can create your own operator which behaves just like withLatestFrom, except that at the very beginning it will emit as soon as the first value of the target observable is emitted (unlike standard withLatestFrom, which will ignore the first emission of the source if the target hasn't yet emitted once). Let's call it delayedWithLatestFrom.
Note that it's written in TypeScript, but you can easily transform it to plain JS. Also, it's a simple version that supports only one target observable and no selector function - you can extend it as needed from here.
export function delayedWithLatestFrom<T, N>(
target$: Observable<N>
): OperatorFunction<T, [T, N]> {
// special value to avoid accidental match with values that could originate from target$
const uniqueSymbol = Symbol('withLatestFromIgnore');
return pipe(
// emit as soon target observable emits the first value
combineLatestWith<T, [N]>(target$.pipe(first())),
// skip the first emission because it's handled above, and then continue like a normal `withLatestFrom` operator
withLatestFrom(target$.pipe(skip(1), startWith(uniqueSymbol))),
map(([[rest, combineLatestValue], withLatestValue]) => {
// take combineLatestValue for the first time, and then always take withLatestValue
const appendedValue =
withLatestValue === uniqueSymbol ? combineLatestValue : withLatestValue;
return [rest, appendedValue];
})
);
}
// SAMPLE USAGE
source$.pipe(
delayedWithLatestFrom(target$)
).subscribe(console.log);
So if you compare it with the original marble diagram for withLatestFrom, it will differ only in one fact: while withLatestFrom ignores the first emissions and produces b1 as the first value, the delayedWithlatestFrom operator will emit one more value a1 at the beginning, as soon as the second observable emits 1.
a) Standard withLatestFrom:
b) Custom delayedWithLatestFrom:
Use combineLatest and filter to remove tuples before first full set is found then set a variable to stop filtering. The variable can be within the scope of a wrapping defer to do things properly (support resubscription). Here it is in java (but the same operators exist in RxJs):
Observable.defer(
boolean emittedOne = false;
return Observable.combineLatest(s1, s2, s3, selector)
.filter(x -> {
if (emittedOne)
return true;
else {
if (hasAll(x)) {
emittedOne = true;
return true;
} else
return false;
}
});
)
I wanted a version where tokens are fetched regularly - and where I want to retry the main data post on (network) failure. I found shareReplay to be the key. The first mergeWith creates a "muted" stream, which causes the first token to be fetched immediately, not when the first action arrives. In the unlikely event that the first token will still not be available in time, the logic also has a startWith with an invalid value. This causes the retry logic to pause and try again. (Some/map is just a Maybe-monad):
Some(fetchToken$.pipe(shareReplay({refCount: false, bufferSize: 1})))
.map(fetchToken$ =>
actions$.pipe(
// This line is just for starting the loadToken loop immediately, not waiting until first write arrives.
mergeWith(fetchToken$.pipe(map(() => true), catchError(() => of(false)), tap(x => loggers.info(`New token received, success: ${x}`)), mergeMap(() => of()))),
concatMap(action =>
of(action).pipe(
withLatestFrom(fetchToken$.pipe(startWith(""))),
mergeMap(([x, token]) => (!token ? throwError(() => "Token not ready") : of([x, token] as const))),
mergeMap(([{sessionId, visitId, events, eventIds}, token]) => writer(sessionId, visitId, events, token).pipe(map(() => <ISessionEventIdPair>{sessionId, eventIds}))),
retryWhen(errors =>
errors.pipe(
tap(err => loggers.warn(`Error writing data to WG; ${err?.message || err}`)),
mergeMap((_error: any, attemptIdx) => (attemptIdx >= retryPolicy.retryCount ? throwError(() => Error("It's enough now, already")) : of(attemptIdx))), // error?.response?.status (int, response code) error.code === "ENOTFOUND" / isAxiosError: true / response === undefined
delayWhen(attempt => timer(attempt < 2 ? retryPolicy.shortRetry : retryPolicy.longRetry, scheduler))
)
)
)
),
)
)
Thanks to everyone on this question-page for good inputs.
Based on the answer from #cjol
Here's a RxJs 7 implementation of a waitFor operator that will buffer the source stream until all input observables have emitted values, then emit all buffered events on the source stream. Any subsequent events on the source stream are emitted immediately.
// Copied from the definition of withLatestFrom() operator.
export function waitFor<T, O extends unknown[]>(
inputs: [...ObservableInputTuple<O>]
): OperatorFunction<T, [T, ...O]>;
/**
* Buffers the source until every observable in "from" have emitted a value. Then
* emit all buffered source values with the latest values of the "from" array.
* Any source events are emitted immediately after that.
* #param from Array of observables to wait for.
* #returns Observable that emits an array that concatenates the source and the observables to wait.
*/
export function waitFor(
from: Observable<unknown>[]
): (source$: Observable<unknown>) => Observable<unknown> {
const combined$ = combineLatest(from);
// This served as a conditional that switched on and off the streams that
// wait for the the other observables, or emits the source right away because
// the other observables have emitted.
const firstCombined$ = combined$.pipe(first());
return function (source$: Observable<unknown>): Observable<unknown> {
return merge(
// This stream will buffer the source until the other observables have all emitted.
source$.pipe(
takeUntil(firstCombined$), // without this it continues to buffer new values forever
buffer(firstCombined$),
mergeAll()
),
// This stream emits the source straight away and will take over when the other
// observables have emitted.
source$.pipe(skipUntil(firstCombined$))
).pipe(
withLatestFrom(combined$),
// Flatten it to behave like withLatestFrom() operator.
map(([source, combined]) => [source, ...combined])
);
};
}
All of the above solutions are not really on the point, therefore I made my own. Hope it helps someone out.
import {
combineLatest,
take,
map,
ObservableInputTuple,
OperatorFunction,
pipe,
switchMap
} from 'rxjs';
/**
* ### Description
* Works similar to {#link withLatestFrom} with the main difference that it awaits the observables.
* When all observables can emit at least one value, then takes the latest state of all observables and proceeds execution of the pipe.
* Will execute this pipe only once and will only retrigger pipe execution if source observable emits a new value.
*
* ### Example
* ```ts
* import { BehaviorSubject } from 'rxjs';
* import { awaitLatestFrom } from './await-latest-from.ts';
*
* const myNumber$ = new BehaviorSubject<number>(1);
* const myString$ = new BehaviorSubject<string>("Some text.");
* const myBoolean$ = new BehaviorSubject<boolean>(true);
*
* myNumber$.pipe(
* awaitLatestFrom([myString$, myBoolean$])
* ).subscribe(([myNumber, myString, myBoolean]) => {});
* ```
* ### Additional
* #param observables - the observables of which the latest value will be taken when all of them have a value.
* #returns a tuple which contains the source value as well as the values of the observables which are passed as input.
*/
export function awaitLatestFrom<T, O extends unknown[]>(
observables: [...ObservableInputTuple<O>]
): OperatorFunction<T, [T, ...O]> {
return pipe(
switchMap((sourceValue) =>
combineLatest(observables).pipe(
take(1),
map((values) => [sourceValue, ...values] as unknown as [T, ...O])
)
)
);
}
Actually withLatestFrom already
waits for every source
emits only when source1 emits
remembers only the last source1-message while the other sources are yet to start
// when source 1 emits the others have emitted already
var source1 = Rx.Observable.interval(500).take(7)
var source2 = Rx.Observable.interval(100, 300).take(10)
var source3 = Rx.Observable.interval(200).take(10)
var selector = (a,b,c) => [a,b,c]
source1
.withLatestFrom(source2, source3, selector)
.subscribe()
vs
// source1 emits first, withLatestFrom discards 1 value from source1
var source1 = Rx.Observable.interval(500).take(7)
var source2 = Rx.Observable.interval(1000, 300).take(10)
var source3 = Rx.Observable.interval(2000).take(10)
var selector = (a,b,c) => [a,b,c]
source1
.withLatestFrom(source2, source3, selector)
.subscribe()

Resources