XCOPY /Y /E "$(SolutionDir)CopyOnBuild\*.*" ".\"
is the command right now. Which tell that the directory to copy files is at same level where the sln is.
My Question is: I want to copy the files to a directory which is one level above the solution directory. How the command should be?
If you are trying to change the destination dir, and make it one level up, try putting two dots instead of one:
XCOPY /Y /E "$(SolutionDir)CopyOnBuild\*.*" "..\"
I have created a batch file to copy one folders files to another folder.
This code XCOPY C:\Temp\a.txt C:\Temp2\a.txt /Q works but when i run this file it ask Overwrite C:\Temp2\a.txt (Yes/No/All)?
I want to do this without asking this question. How can i do ? And i want to this for aspx or aspx.cs files
From the manual:
/Y Suppresses prompting to confirm you want to overwrite an existing
destination file
So just add the /Y option in order to overwrite all files without asking.
If you want to copy all files that contain "aspx", you can use
XCOPY C:\Temp\aspx* C:\Temp2\ /Q /Y
You can try this :
XCOPY C:\Temp\a.txt C:\Temp2\a.txt /Q /Y
Im trying to make a batch file that will copy all new files and folders from a source folder to an network directory. All the new subdirectories and new files should be copied (backup).
My code:
xcopy "C:\Source" "T:\Backup" /d/i/s/q
(/d for only new files, /i because source is a dir, /s for all the subdirs and files, /q just to supress the copy text)
Source contains both subdirectories and files (.txt).
The first run it copies Everything as it should. When I add a new .txt file to one of the existing subdirectories and run it again I get the message:
"An error occured when the file The directory is not empty. was being created.
The folder "T:\Backup" could not be created.
0 files copied.
(Translated from Swedish so not 100% original)
The thing is when I try this command to a local source like e.g. "C:\test" and do the same procedure it works.
Anyone who can understand why this doesn't work for the network drive?
Should I try Another command such as robocopy?
Skip xcopy and use robocopy with the /E flag instead. It's built into all recent versions of Windows. Free download for XP.
Example:
robocopy c:\source T:\backup /E
That will copy all the files in the "source" folder to the "backup" folder that haven't been copied already.
And if you don't want to have the output shown on the console (equivalent to the /Q option in xcopy):
robocopy c:\source T:\backup /E /LOG:nul
Robocopy must be better because it should create directories with the \E switch. No overwrites for files, just adds a file with extra letters or extension <> command. Still must defrag.
XCOPY "DRIVE LETTER:\windows.old\USERS" "\computername\D\NAME\" /D /E /C /R /I /K /Y /f
I have following batch script. It takes data from C:\Source into C:\MyTEST\A\webroot\payrollservice.The source folder has two files 1. Web.config and 2. Web_PROD backup.
In the roll script there is a command to rename the config file. When I run the script first time, it is working fine. But when I run the script again , the renaming of file is not working. The root cause is that the remove directory command is not removing the folder. What need to be corrected here?
rem * STEP 1 taking backup of the folder
mkdir "C:\MyTEST\A\webroot\backup\b05232013v1\payrollservice"
xcopy "C:\MyTEST\A\webroot\payrollservice" "C:\MyTEST\A\webroot\backup\b05232013v1\payrollservice" /E /y /H
rem * STEP 2 remove physical folder
rmdir "C:\MyTEST\A\webroot\payrollservice"
rem * STEP 3 create physical folder
mkdir "C:\MyTEST\A\webroot\payrollservice"
rem * STEP 4 Copy sourcecode to Production boxes
xcopy "C:\Source" "C:\MyTEST\A\webroot\payrollservice" /E /y /H
rem * STEP 5 Rename teh config file
ren C:\MyTEST\A\webroot\payrollservice\Web.config WebLabbackup.config
ren C:\MyTEST\A\webroot\payrollservice\Web_PROD.config Web.config
pause
From Xcopy
/e : Copies all subdirectories, even if they are empty.
/y : Suppresses prompting to confirm that you want to overwrite an existing destination file.
/h : Copies files with hidden and system file attributes. By default, xcopy does not copy hidden or system files.
Reference
Windows batch files: .bat vs .cmd?
From rmdir
/s : Removes the specified directory and all subdirectories including any files. Use /s to remove a tree.
/q : Runs rmdir in quiet mode. Deletes directories without confirmation.
Figured it out. I need to use /s /q at the end of rmdir command.
I have a folder: C:\Folder1
I want to copy all the contents of Folder1 to another location, D:\Folder2
How do I do this using a batch file?
xcopy.exe is the solution here. It's built into Windows.
xcopy /s c:\Folder1 d:\Folder2
You can find more options at http://www.computerhope.com/xcopyhlp.htm
If you have robocopy,
robocopy C:\Folder1 D:\Folder2 /COPYALL /E
otherwise,
xcopy /e /v C:\Folder1 D:\Folder2
I see a lot of answers suggesting the use of xcopy.
But this is unnecessary. As the question clearly mentions that the author wants the content in the folder not the folder itself to be copied in this case we can do
copy "C:\Folder1\*.*" "D:\Folder2"
Thats all xcopy can be used for if any subdirectory exists in C:\Folder1
if you want remove the message that tells if the destination is a file or folder you just add a slash:
xcopy /s c:\Folder1 d:\Folder2\
RoboCopy did not work for me, and there are some good solutions here, but none explained the XCopy switches and what they do. Also you need quotes in case your path has spaces in it.
xcopy /i /e "C:\temp\folder 1" "C:\temp\folder 2"
Here is the documentation from Microsoft:
XCopy MS Documentation
/s: Specifies to include subdirectories. Excludes empty subdirectories
/e: Copies all subdirectories, even if they are empty
/i: specifies the destination is a folder (Otherwise it prompts you)
Here's a solution with robocopy which copies the content of Folder1 into Folder2 going trough all subdirectories and automatically overwriting the files with the same name:
robocopy C:\Folder1 C:\Folder2 /COPYALL /E /IS /IT
Here:
/COPYALL copies all file information
/E copies subdirectories including empty directories
/IS includes the same files
/IT includes modified files with the same name
For more parameters see the official documentation: https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/robocopy
Note: it can be necessary to run the command as administrator, because of the argument /COPYALL. If you can't: just get rid of it.
#echo off
::Ask
echo Your Source Path:
set INPUT1=
set /P INPUT1=Type input: %=%
echo Your Destination Path:
set INPUT2=
set /P INPUT2=Type input: %=%
xcopy %INPUT1% %INPUT2% /y /s
On my PC, xcopy and robocopy need also the path to them, i.e. C:\Windows\System32\xcopy.exe
That's why I use simply "copy":
copy /y ....\Folder1\File.txt ....\Folder2\
#echo off
xcopy /s C:\yourfile C:\anotherfile\
This is how it is done!
Simple, right?
FYI...if you use TortoiseSVN and you want to create a simple batch file to xcopy (or directory mirror) entire repositories into a "safe" location on a periodic basis, then this is the specific code that you might want to use. It copies over the hidden directories/files, maintains read-only attributes, and all subdirectories and best of all, doesn't prompt for input. Just make sure that you assign folder1 (safe repo) and folder2 (usable repo) correctly.
#echo off
echo "Setting variables..."
set folder1="Z:\Path\To\Backup\Repo\Directory"
set folder2="\\Path\To\Usable\Repo\Directory"
echo "Removing sandbox version..."
IF EXIST %folder1% (
rmdir %folder1% /s /q
)
echo "Copying official repository into backup location..."
xcopy /e /i /v /h /k %folder2% %folder1%
And, that's it folks!
Add to your scheduled tasks and never look back.
I have written a .bat file to copy and paste file to a temporary folder and make it zip and transfer into a smb mount point,
Hope this would help,
#echo off
if not exist "C:\Temp Backup\" mkdir "C:\Temp Backup_%date:~-4,4%%date:~-10,2%%date:~-7,2%"
if not exist "C:\Temp Backup_%date:~-4,4%%date:~-10,2%%date:~-7,2%\ZIP" mkdir "C:\Temp Backup_%date:~-4,4%%date:~-10,2%%date:~-7,2%\ZIP"
if not exist "C:\Temp Backup_%date:~-4,4%%date:~-10,2%%date:~-7,2%\Logs" mkdir "C:\Temp Backup_%date:~-4,4%%date:~-10,2%%date:~-7,2%\Logs"
xcopy /s/e/q "C:\Source" "C:\Temp Backup_%date:~-4,4%%date:~-10,2%%date:~-7,2%"
Backup_%date:~-4,4%%date:~-10,2%%date:~-7,2%\Logs"
"C:\Program Files (x86)\WinRAR\WinRAR.exe" a "C:\Temp Backup_%date:~-4,4%%date:~-10,2%%date:~-7,2%\ZIP\ZIP_Backup_%date:~-4,4%_%date:~-10,2%_%date:~-7,2%.rar" "C:\Temp Backup_%date:~-4,4%%date:~-10,2%%date:~-7,2%\TELIUM"
"C:\Program Files (x86)\WinRAR\WinRAR.exe" a "C:\Temp Backup_%date:~-4,4%%date:~-10,2%%date:~-7,2%\ZIP\ZIP_Backup_Log_%date:~-4,4%_%date:~-10,2%_%date:~-7,2%.rar" "C:\Temp Backup_%date:~-4,4%%date:~-10,2%%date:~-7,2%\Logs"
NET USE \\IP\IPC$ /u:IP\username password
ROBOCOPY "C:\Temp Backup_%date:~-4,4%%date:~-10,2%%date:~-7,2%\ZIP" "\\IP\Backup Folder" /z /MIR /unilog+:"C:\backup_log_%date:~-4,4%%date:~-10,2%%date:~-7,2%.log"
NET USE \\172.20.10.103\IPC$ /D
RMDIR /S /Q "C:\Temp Backup_%date:~-4,4%%date:~-10,2%%date:~-7,2%"
#echo off
:: variables
echo Backing up file
set /P source=Enter source folder:
set /P destination=Enter Destination folder:
set xcopy=xcopy /S/E/V/Q/F/H/I/N
%xcopy% %source% %destination%
echo files will be copy press enter to proceed
pause