When I try to preview one of my views in the canvas I keep getting the following error:
PreviewUpdateTimedOutError: Updating took more than 5 seconds
All my other views load perfectly fine.
Why is this happening and how do I resolve?
I am using SwiftUI in Xcode 11.4 (public release)
I stopped using the simulator and chose "Any iOS Device" and that solved the problem.
In my case the issue was this line in Build settings:
Something I did accidentally changed signing settings in my project. Specifically, "signing identity" was set to "Sign to Run Locally.".
For some reasons, SwiftUI Previews don't work then.
Simply deleting this line from build settings (aka setting default value) solved the problem.
Some time, the error displaying is not the real error.
For me it was because i missing : .environmentObject(...)
As of Xcode 12.5.1, the message PreviewUpdateTimedOutError: Updating took more than 5 seconds most likely means that your app crashed and thus updating the preview failed. The real reason for the crash is unfortunately obscured by this useless message (why Apple would do that is beyond me). To get at the real reason, you'll need to:
click Diagnostics at the top of the preview next to the useless error message
in the next dialog, click Generate Report > Reveal in Finder
This will take a bit. Then Finder will open with a folder highlighted. Open that folder. Inside you'll see a lot of log files and folders.
If your app indeed crashed, you'll see a folder called CrashLogs which contains crash logs for your app, including the error message and stack trace. This should help you resolve the actual error causing the preview to break.
Note that for me, sometimes the CrashLogs were not included in the report even though my app really did crash. Retrying the preview and generating another report fixed this for me. The whole error reporting process seems to be rather unstable for the previews, unfortunately.
Try Clean (Shift + ⌘ + K) and Build (⌘ + B) to build again the SwiftUI project, it works in Xcode 11.6. Try building a basic hello world app.
In my case the issue was that the PreviewProvider was marked private. Simply make it internal or remove the private access modifier.
private /* <- remove */ struct YourView_Previews: PreviewProvider {
static var previews: some View {
// Your previews
}
}
I am using Version 13.2.1 (13C100). I have Clean (Shift + ⌘ + K) and Build (⌘ + B) the project. But, the problem remains.
Then, just restarted Xcode. And the problem gone.
In my case viewModel required to display SwiftUI_preview was doing a call to a CoreData (fast call) in the init of the viewModel.
Moved actual call of that "reload() method" so it's not called on preview, fixed.
(I believe the correct way is to use mocked protocol instead of instance of the viewModel)
If you have an .onAppear clause, try commenting that out for preview.
None of these suggestions helped me but I did discover that you can't rely entirely on a successful build to pick up all issues. In my case I had '.modifier(modifier:)' entered incorrectly as 'modifier(modifier:)'. My code built successfully but my preview did not work until I added the period before modifier.
For me the issue was related to a force unwrapping of an element not being found at preview time.
Note: Always check the diagnostics report. The issue will be at the top section after termination reason.
In my case the canvas/screen size was smaller than the content, so simply wrapping my content in the scrollView do remove the error and displaying the content in the canvas.
I had a fatalError("...") in my code, which I only figured out after reading the diagnostic logs. Would be nice if SwiftUI actually hinted this!
You can get the diagnostics by clicking "Diagnostics" next to "Try Again" at the top of the preview window.
To summarise lots of answers here, it seems that the preview taking a while to update is the equivalent of a crash, when running on a real device or on the simulator.
First comment out all the environment Objects are used for the particular View. Once you get preview then uncomment it to run the build. This trick works for me
//#EnvironmentObject var observerObj:PropertyObserver
I had this issue as well, and nothing fixed the problem. I am now on 11.6 and after updating the issue went away. I think it might be a problem with Xcode 11.4.
I'd suggest updating Xcode if possible.
In SwiftUI, you couldn't add more than 10 subviews into your contentview, otherwise it couldn't compile.
I had the same problem, then I started to comment out the subViews inside my main view, one by one & try to preview again then I found out the problem was caused because I forgot to put a dot before one of the subViews attributes.
So that's how I fixed it.
The reason is because its unable to find the landmarkData.json file. To resolve this,
select landmark.json file in Resources.
Show Inspectors ( top right icon )
Select show file inspector
Under Target membership, select / check Landmarks
This should resolve the preview issue.
For some reason, in SwiftUI, when I embeded Text in Scroll View and VStack, this error occurred. After few unsuccessful attempts to fix this by clearing and building project, I deleted code and wrote it down again, same as it was. Now it is working.
I had my run device set to a real device I use for testing. When I changed that to one in the simulator it started working again.
Similar to #YannSteph, this happened to me because I put the .environmentObject() at the app entry point where it creates the first view:
#main
struct RecipeApp: App {
var body: some Scene {
WindowGroup {
RecipeTabView()
.environmentObject(RecipeModel())
}
}
}
But this prevented the preview from working. I thought I was being smart putting it there, so all the views could have access to it, but it just crashed the preview.
Moving it back into the main View.Swift file that is my app's starting view fixed the preview issue.
^^^
EDIT: Ran into this again when I didn't put the .environmentObject() in the struct for the preview. Probably a rookie mistake but there appears to be many ways to trigger this error.
I had the same issue after creating a brand new Multiplatform App project using Xcode 12.5. Based on the solutions above I followed a hunch and now believe that the issue is due to invalid path parameters.
After renaming the Schemes and Targets from (iOS) to .iOS (and the same for macOS), to remove spaces and brackets, it is now working.
I had this issue after changing bundle id and signing from personal to team.
After changing device to Any device as advised here, I received another error description, saying
Could not install the preview host "AppName.app" on iPhone 12 Pro Max
agentBundle = com.bundle.Its.AppName {
url: file:///Users/macbookair/Library/Developer/Xcode/DerivedData/AppName-> desupjbpqvjlegfbskxydixpouvc/Build/Intermediates.noindex/Previews/AppName/Prod> ucts/Debug-iphonesimulator/AppName.app
> version: 49557
signingInformation: Code Signing {
identifier: com.bundle.AppName
hasGetTaskAllow: false
isSandboxed: false
}
}
Clean build, deleting Derived, Deleting all apps installed on simulators, cleaning Xcode Cache, restarting Xcode and Mac didn't help.
What had helped was creating new project with initially correct bundle id and copying all my files there.
I have got into the same issue on Xcode 12.4, but the code works fine on Xcode 13.0.
I was following the IOS App Dev Tutorial, where one creates an app named ScrumDinger. I ran into this issue at Displaying Data in List
In my case the problem was that I wrote in CardView.swift
HStack {
Label("\(scrum.attendees.count)", systemImage: "person.3")
accessibilityLabel("\(scrum.attendees.count) attendees")
instead of
HStack {
Label("\(scrum.attendees.count)", systemImage: "person.3")
.accessibilityLabel("\(scrum.attendees.count) attendees")
The missing dot before accessibilityLabel was the problem.
Tutorial:
https://developer.apple.com/tutorials/app-dev-training/displaying-data-in-a-list
In my case the issue was that I was trying to preview a view with a fixed width (.previewLayout(.fixed(width: 344, height: 220))) wider than the selected simulator (iPhone SE 1st generation) 😬
I get this error often. My last time of occurrence, I had "gesture" instead of ".gesture". Usually its best to just need to find the error in your code yourself because Xcode does not point out the issue directly.
I only had Xcode 14 Beta installed on my machine and the previews did not work. All of the other answers did not work for me.
Installing Xcode 13.4.1 and running the preview with it did solve my problems and now I can also see the preview in Xcode 14 Beta as well.
In my case, I disabled automatic canvas refresh by going to Editor -> Canvas -> Automatically Refresh Canvas and making sure it.
Then I use ⌥⌘P (Command-Option-P) to refresh the canvas preview.
I have created the document picker extension(Both File provide and document picker , with the default implementations) and when i try to open the extension using the DocumentPickerViewController, its immediately closing the DocumentPickerViewController by showing the below issue
plugin com.apple.UIKit.fileprovider.default invalidated.
I have setup the basic app groups and iCloud entitlement as well, Which are all fine. Even from the documentViewController the default iCloud is working perfectly fine.
Actually i am testing the extension using the same container application.
If somebody can provide some insight about this behavior, it would be a great help !!
Thanks,
Vishnu
I got the issue, actually the value of NSExtensionFileProviderDocumentGroup key was put incorrectly put on the info.plist of the file provider extension by XCode by the time of adding the App group.
Then I compared the files with the NBox sample from Apple and finally figured it out.
So sometimes beware of XCode automatic actions, make a cross check so to save to time.
I have been developing an OSX app with Delphi XE3 and running into various problems. The latest one is with the sanboxed version built for the Apple Appstore.
The user has to select an arbitrary folder and the app needs to get access to it. Since there is a problem with the OpenDialog, I had to turn to drag-drop functionality instead.
The user drags a folder to the app, the sandbox gives the app temporary access to it and all works properly.
To preserve the access to this folder when the app is restarted I have to use the so-called "security-scoped bookmarks"
I am having two issues with them:
1) How to add the "com.apple.security.files.bookmarks.app-scope" entitlement to an XE3 firemonkey app? It is not available in the Project Options->Entitlements. If I add it manually in the ".entitlements" file it gets overwritten when the app is built.
So is there a way to add a custom entitlement that is not in the list in the project options?
2) To create the bookmark I should use the NSURL.bookmarkDataWithOptions method. I think it should be used like this, but I am not sure of the exact syntax:
var
URL: NSURL;
Err: NSError;
Data: NSData;
...
URL := TNSURL.Create;
Data := URL.bookmarkDataWithOptions(NSURLBookmarkCreationWithSecurityScope, nil, #Err);
...
Maybe there should be a call to Wrap(...) instead of Create.
I have not yet experimented with it, because it is pointless without the answer to issue 1).
It seems no one has written anything about these problems for Delphi, but I hope someone here has experience with that.
Thanks in advance.
Edit:
For problem 1) I tried to add edit manually the ".entitlements" file in the OSX32 folder and set it to read-only to prevent it from being overwritten. It was too easy to be true of course, because the linker complained that the file can not be modified...
OK, I finally found the way to manually add entitlements that are not available in the Project Options > Entitlements.
Instead of selecting the "App Store" build in the Project Manager you have to select a Normal release build and deploy the application as usual.
The application gets deployed in the PAServer scratch-dir as APP package. Inside this package there is an "Entitlements.plist" file, which is in XML format and can be edited with a text editor. It is quite obvious how to add new entitlements once you open the file.
After it is edited, the app has to be code-signed manually and a package has to be prepared. It is slightly more complicated than using the Delphi IDE, but there are instructions about it on the Embarcadero and Apple websites and it actually went without problems.
Still haven't tried the bookmarkDataWithOptions functions.
An alternative could be to deactivate the checkbox for the entitlements-file in the deployment page.
But attention: Evry time you change between Build/Release or App Store/Normal, delphi activates the checkbox. That means you have to deactivate it again in the deplayment-page, to avoid the transfer of this file to the mac PC.
By the way: Do you have tryed meanwhile the StartAccessingSecurityScopedResource function?
In the MacApi.Foundation unit the function is not declared in the NSURL interface.
Do you have found a way to use this function?
Users of my application keep running into issues related to other applications declaring a different UTI for the same file extension as my application. I think I can best describe this with an example:
My application supports importing and exporting OPML files. For this to work I import the org.opm.opml UTI in my info.plist. This mostly works fine, but fails if an other application declares a different UTI for the opml file extension. For example com.redlex.opml or com.xwavesoft.cloudoutliner.opml.
Is there something I can do to work around this problem? Can I somehow tell launch services that my application accepts all files with an .opml extension?
I solved this issue with the following work around:
I removed the entire LSItemContentTypes entry from the list of CFBundleDocumentTypes
In my NSDocument subclass I use NSString's rangeOfString:: method to look for the #"opml" keyword in the typeName parameter.
This work around was confirmed by a user.
Cloud Outliner updated on the MAS today, and looking at the UTI for .opml files now, the com.xwavesoft.cloudoutliner.opml is now gone and com.redlex.opml is now in its place. Which would be uninteresting, except for the fact that OPML files now open in MindNode without a problem.
I can't find any release notes for Cloud Outliner other than "various fixes and improvements." but it would seem that something changed for the better. So: in my case - the simple answer was "update Cloud Outliner" but I'm not sure this solves the larger problem. I also have Mellel on my system (obviously, right?!) but this doesn't seem to be causing the same issue.
For those watching this thread - the issue presented as MindNode showing greyed-out icons for OPML files in its open dialog. Dragging OPML to the MindNode icon in the dock also produced no results.
Rob
I am trying to develop QRCode reader application in iPhone.
I am trying to use ZXing SDK. i have successfully run the sample application given by ZXing. But i ma trying to develope new application as per instructions in Readme given by Zxing. but when i am trying to add ZxingWidget in build phases. it going add but it shows like below
I think it will getting problem to me. When i am trying to run application it will give erros like Lexical or Prepocessor issue File not found.
Is am doing any thing wrong when am added to files to application.
Actaully first of all i added ZxingWidget.xcodeproj to my application by drag and drop. But it wont give any alert window would you like copy like similar when we adding images or files to xcode. and next i added cpp and iphone folders to xcode application. and later i added the frameworks as per read me.
Please any one help me in this issue.
Thanks in advance
Pretty hard to help without the real error message. In the Issue Navigator, you can Right Click > Reveal in Log to see the complete error that you can copy and paste.
That said, it sounds a bit like it can't find the headers (though I'm just guessing without the real error message.) If so, double check steps 4 and 5 of the readme.
if you run on real device, the problem will be solved.
I don't know the reason.
But I guess It's related to Build Products Path.