Passing an environment variable to a bash script over ssh from perl system - bash

Currently I am executing run scripts using perl system by sshing into a remote machine:
system("ssh -t remote $dir/bashscript> $dir/stdout.stdout 2> $dir/stderr.stderr &");
I want to pass an environment variable to the bashscript on my remote machine (a directory to be specific). What is the best way to do it? And what should I add in my bashscript to accept the argument?


Try this:
system("ssh -t remote FOO='dir/dir/filename.stderr' $dir/bashscript> $dir/stdout.stdout 2> $dir/stderr.stderr &");
Note that if the value comes from an untrusted source this can be dangerous. You should really escape the value before you pass is like that. For example, you could do something like this:
my $foo='some value here';
$foo=~s/'/'\\''/g; # escape the '
system("ssh -t remote env FOO='$FOO' $dir/bashscript> $dir/stdout.stdout 2> $dir/stderr.stderr &");
In either case, bashscript can access the value via $FOO.


With all of #redneb's caveat's about sanitizing input
ssh remotehost FOO=bar \; export FOO \; script > out 2> err
or if you're sure that the shell on the remote host will be bash, the more compact
ssh remotehost export FOO=bar \; script > out 2> err

Related

Ansible Using shell module, how do I ssh and remain in the same directory? [duplicate]

I already have an ssh agent set up, and I can run commands on an external server in Bash script doing stuff like:
ssh blah_server "ls; pwd;"
Now, what I'd really like to do is run a lot of long commands on an external server. Enclosing all of these in between quotation marks would be quite ugly, and I'd really rather avoid ssh'ing multiple times just to avoid this.
So, is there a way I can do this in one go enclosed in parentheses or something? I'm looking for something along the lines of:
ssh blah_server (
ls some_folder;
./someaction.sh;
pwd;
)
Basically, I'll be happy with any solution as long as it's clean.
Edit
To clarify, I'm talking about this being part of a larger bash script. Other people might need to deal with the script down the line, so I'd like to keep it clean. I don't want to have a bash script with one line that looks like:
ssh blah_server "ls some_folder; ./someaction.sh 'some params'; pwd; ./some_other_action 'other params';"
because it is extremely ugly and difficult to read.

How about a Bash Here Document:
ssh otherhost << EOF
ls some_folder;
./someaction.sh 'some params'
pwd
./some_other_action 'other params'
EOF
To avoid the problems mentioned by #Globalz in the comments, you may be able to (depending what you're doing on the remote site) get away with replacing the first line with
ssh otherhost /bin/bash << EOF
Note that you can do variable substitution in the Here document, but you may have to deal with quoting issues. For instance, if you quote the "limit string" (ie. EOF in the above), then you can't do variable substitutions. But without quoting the limit string, variables are substituted. For example, if you have defined $NAME above in your shell script, you could do
ssh otherhost /bin/bash << EOF
touch "/tmp/${NAME}"
EOF
and it would create a file on the destination otherhost with the name of whatever you'd assigned to $NAME. Other rules about shell script quoting also apply, but are too complicated to go into here.

Edit your script locally, then pipe it into ssh, e.g.
cat commands-to-execute-remotely.sh | ssh blah_server
where commands-to-execute-remotely.sh looks like your list above:
ls some_folder
./someaction.sh
pwd;

To match your sample code, you can wrap your commands inside single or double qoutes. For example
ssh blah_server "
ls
pwd
"

I see two ways:
First you make a control socket like this:
ssh -oControlMaster=yes -oControlPath=~/.ssh/ssh-%r-%h-%p <yourip>
and run your commands
ssh -oControlMaster=no -oControlPath=~/.ssh/ssh-%r-%h-%p <yourip> -t <yourcommand>
This way you can write an ssh command without actually reconnecting to the server.
The second would be to dynamically generate the script, scping it and running.

This can also be done as follows.
Put your commands in a script, let's name it commands-inc.sh
#!/bin/bash
ls some_folder
./someaction.sh
pwd
Save the file
Now run it on the remote server.
ssh user#remote 'bash -s' < /path/to/commands-inc.sh
Never failed for me.

Put all the commands on to a script and it can be run like
ssh <remote-user>#<remote-host> "bash -s" <./remote-commands.sh

Not sure if the cleanest for long commands but certainly the easiest:
ssh user#host "cmd1; cmd2; cmd3"

This works well for creating scripts, as you do not have to include other files:
#!/bin/bash
ssh <my_user>#<my_host> "bash -s" << EOF
# here you just type all your commmands, as you can see, i.e.
touch /tmp/test1;
touch /tmp/test2;
touch /tmp/test3;
EOF
# you can use '$(which bash) -s' instead of my "bash -s" as well
# but bash is usually being found in a standard location
# so for easier memorizing it i leave that out
# since i dont fat-finger my $PATH that bad so it cant even find /bin/bash ..

SSH and Run Multiple Commands in Bash.
Separate commands with semicolons within a string, passed to echo, all piped into the ssh command. For example:
echo "df -k;uname -a" | ssh 192.168.79.134
Pseudo-terminal will not be allocated because stdin is not a terminal.
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda2 18274628 2546476 14799848 15% /
tmpfs 183620 72 183548 1% /dev/shm
/dev/sda1 297485 39074 243051 14% /boot
Linux newserv 2.6.32-431.el6.x86_64 #1 SMP Sun Nov 10 22:19:54 EST 2013 x86_64 x86_64 x86_64 GNU/Linux

The posted answers using multiline strings and multiple bash scripts did not work for me.
Long multiline strings are hard to maintain.
Separate bash scripts do not maintain local variables.
Here is a functional way to ssh and run multiple commands while keeping local context.
LOCAL_VARIABLE=test
run_remote() {
echo "$LOCAL_VARIABLE"
ls some_folder;
./someaction.sh 'some params'
./some_other_action 'other params'
}
ssh otherhost "$(set); run_remote"

For anyone stumbling over here like me - I had success with escaping the semicolon and the newline:
First step: the semicolon. This way, we do not break the ssh command:
ssh <host> echo test\;ls
^ backslash!
Listed the remote hosts /home directory (logged in as root), whereas
ssh <host> echo test;ls
^ NO backslash
listed the current working directory.
Next step: breaking up the line:
v another backslash!
ssh <host> echo test\;\
ls
This again listed the remote working directory - improved formatting:
ssh <host>\
echo test\;\
ls
If really nicer than here document or quotes around broken lines - well, not me to decide...
(Using bash, Ubuntu 14.04 LTS.)

The easiest way to configure your system to use single ssh sessions by default with multiplexing.
This can be done by creating a folder for the sockets:
mkdir ~/.ssh/controlmasters
And then adding the following to your .ssh configuration:
Host *
ControlMaster auto
ControlPath ~/.ssh/controlmasters/%r#%h:%p.socket
ControlMaster auto
ControlPersist 10m
Now, you do not need to modify any of your code. This allows multiple calls to ssh and scp without creating multiple sessions, which is useful when there needs to be more interaction between your local and remote machines.
Thanks to #terminus's answer, http://www.cyberciti.biz/faq/linux-unix-osx-bsd-ssh-multiplexing-to-speed-up-ssh-connections/ and https://en.wikibooks.org/wiki/OpenSSH/Cookbook/Multiplexing.

What is the cleanest way to ssh and run multiple commands in Bash?
I recommend using this escaping function. The function takes one argument - a function to escape. Then sshqfunc outputs declare -f of the function and then outputs a string that will call the function with "$#" arguments properly quoted. Then the whole is "%q" quoted and bash -c is added. In case the remote does not have bash, you could change bash to sh.
sshqfunc() { echo "bash -c $(printf "%q" "$(declare -f "$#"); $1 \"\$#\"")"; };
Then define a function with the work you want to do on the remote. The function is defined normally, so it will be properly "clean". You can test such function locally. After defining, properly escaped function is passed to the remote.
work() {
ls
pwd
echo "Some other command"
}
ssh host#something "$(sshqfunc work)"
Passing You can also pass arguments, and they will be passed to your function as positional arguments. The right next argument after the function will be assigned to $0 - usually a placeholder like -- or _ is used to separate arguments from call.
work() {
file=$1
num=$2
ls "$file"
echo "num is $num"
}
ssh host#something "$(sshqfunc work)" -- /this/file 5
But note that arguments should also be properly quoted if there are any magic characters:
ssh host#something "$(sshqfunc work)" -- "$(printf "%q" "$var1" "$var2")"

For simple commands you can use:
ssh <ssh_args> command1 '&&' command2
or
ssh <ssh_args> command1 \&\& command2

Navigating in ssh server through a local bash script [duplicate]

I already have an ssh agent set up, and I can run commands on an external server in Bash script doing stuff like:
ssh blah_server "ls; pwd;"
Now, what I'd really like to do is run a lot of long commands on an external server. Enclosing all of these in between quotation marks would be quite ugly, and I'd really rather avoid ssh'ing multiple times just to avoid this.
So, is there a way I can do this in one go enclosed in parentheses or something? I'm looking for something along the lines of:
ssh blah_server (
ls some_folder;
./someaction.sh;
pwd;
)
Basically, I'll be happy with any solution as long as it's clean.
Edit
To clarify, I'm talking about this being part of a larger bash script. Other people might need to deal with the script down the line, so I'd like to keep it clean. I don't want to have a bash script with one line that looks like:
ssh blah_server "ls some_folder; ./someaction.sh 'some params'; pwd; ./some_other_action 'other params';"
because it is extremely ugly and difficult to read.

How about a Bash Here Document:
ssh otherhost << EOF
ls some_folder;
./someaction.sh 'some params'
pwd
./some_other_action 'other params'
EOF
To avoid the problems mentioned by #Globalz in the comments, you may be able to (depending what you're doing on the remote site) get away with replacing the first line with
ssh otherhost /bin/bash << EOF
Note that you can do variable substitution in the Here document, but you may have to deal with quoting issues. For instance, if you quote the "limit string" (ie. EOF in the above), then you can't do variable substitutions. But without quoting the limit string, variables are substituted. For example, if you have defined $NAME above in your shell script, you could do
ssh otherhost /bin/bash << EOF
touch "/tmp/${NAME}"
EOF
and it would create a file on the destination otherhost with the name of whatever you'd assigned to $NAME. Other rules about shell script quoting also apply, but are too complicated to go into here.

Edit your script locally, then pipe it into ssh, e.g.
cat commands-to-execute-remotely.sh | ssh blah_server
where commands-to-execute-remotely.sh looks like your list above:
ls some_folder
./someaction.sh
pwd;

To match your sample code, you can wrap your commands inside single or double qoutes. For example
ssh blah_server "
ls
pwd
"

I see two ways:
First you make a control socket like this:
ssh -oControlMaster=yes -oControlPath=~/.ssh/ssh-%r-%h-%p <yourip>
and run your commands
ssh -oControlMaster=no -oControlPath=~/.ssh/ssh-%r-%h-%p <yourip> -t <yourcommand>
This way you can write an ssh command without actually reconnecting to the server.
The second would be to dynamically generate the script, scping it and running.

This can also be done as follows.
Put your commands in a script, let's name it commands-inc.sh
#!/bin/bash
ls some_folder
./someaction.sh
pwd
Save the file
Now run it on the remote server.
ssh user#remote 'bash -s' < /path/to/commands-inc.sh
Never failed for me.

Put all the commands on to a script and it can be run like
ssh <remote-user>#<remote-host> "bash -s" <./remote-commands.sh

Not sure if the cleanest for long commands but certainly the easiest:
ssh user#host "cmd1; cmd2; cmd3"

This works well for creating scripts, as you do not have to include other files:
#!/bin/bash
ssh <my_user>#<my_host> "bash -s" << EOF
# here you just type all your commmands, as you can see, i.e.
touch /tmp/test1;
touch /tmp/test2;
touch /tmp/test3;
EOF
# you can use '$(which bash) -s' instead of my "bash -s" as well
# but bash is usually being found in a standard location
# so for easier memorizing it i leave that out
# since i dont fat-finger my $PATH that bad so it cant even find /bin/bash ..

SSH and Run Multiple Commands in Bash.
Separate commands with semicolons within a string, passed to echo, all piped into the ssh command. For example:
echo "df -k;uname -a" | ssh 192.168.79.134
Pseudo-terminal will not be allocated because stdin is not a terminal.
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda2 18274628 2546476 14799848 15% /
tmpfs 183620 72 183548 1% /dev/shm
/dev/sda1 297485 39074 243051 14% /boot
Linux newserv 2.6.32-431.el6.x86_64 #1 SMP Sun Nov 10 22:19:54 EST 2013 x86_64 x86_64 x86_64 GNU/Linux

The posted answers using multiline strings and multiple bash scripts did not work for me.
Long multiline strings are hard to maintain.
Separate bash scripts do not maintain local variables.
Here is a functional way to ssh and run multiple commands while keeping local context.
LOCAL_VARIABLE=test
run_remote() {
echo "$LOCAL_VARIABLE"
ls some_folder;
./someaction.sh 'some params'
./some_other_action 'other params'
}
ssh otherhost "$(set); run_remote"

For anyone stumbling over here like me - I had success with escaping the semicolon and the newline:
First step: the semicolon. This way, we do not break the ssh command:
ssh <host> echo test\;ls
^ backslash!
Listed the remote hosts /home directory (logged in as root), whereas
ssh <host> echo test;ls
^ NO backslash
listed the current working directory.
Next step: breaking up the line:
v another backslash!
ssh <host> echo test\;\
ls
This again listed the remote working directory - improved formatting:
ssh <host>\
echo test\;\
ls
If really nicer than here document or quotes around broken lines - well, not me to decide...
(Using bash, Ubuntu 14.04 LTS.)

The easiest way to configure your system to use single ssh sessions by default with multiplexing.
This can be done by creating a folder for the sockets:
mkdir ~/.ssh/controlmasters
And then adding the following to your .ssh configuration:
Host *
ControlMaster auto
ControlPath ~/.ssh/controlmasters/%r#%h:%p.socket
ControlMaster auto
ControlPersist 10m
Now, you do not need to modify any of your code. This allows multiple calls to ssh and scp without creating multiple sessions, which is useful when there needs to be more interaction between your local and remote machines.
Thanks to #terminus's answer, http://www.cyberciti.biz/faq/linux-unix-osx-bsd-ssh-multiplexing-to-speed-up-ssh-connections/ and https://en.wikibooks.org/wiki/OpenSSH/Cookbook/Multiplexing.

What is the cleanest way to ssh and run multiple commands in Bash?
I recommend using this escaping function. The function takes one argument - a function to escape. Then sshqfunc outputs declare -f of the function and then outputs a string that will call the function with "$#" arguments properly quoted. Then the whole is "%q" quoted and bash -c is added. In case the remote does not have bash, you could change bash to sh.
sshqfunc() { echo "bash -c $(printf "%q" "$(declare -f "$#"); $1 \"\$#\"")"; };
Then define a function with the work you want to do on the remote. The function is defined normally, so it will be properly "clean". You can test such function locally. After defining, properly escaped function is passed to the remote.
work() {
ls
pwd
echo "Some other command"
}
ssh host#something "$(sshqfunc work)"
Passing You can also pass arguments, and they will be passed to your function as positional arguments. The right next argument after the function will be assigned to $0 - usually a placeholder like -- or _ is used to separate arguments from call.
work() {
file=$1
num=$2
ls "$file"
echo "num is $num"
}
ssh host#something "$(sshqfunc work)" -- /this/file 5
But note that arguments should also be properly quoted if there are any magic characters:
ssh host#something "$(sshqfunc work)" -- "$(printf "%q" "$var1" "$var2")"

For simple commands you can use:
ssh <ssh_args> command1 '&&' command2
or
ssh <ssh_args> command1 \&\& command2

Write SSH command over multiple lines

I'm trying to remote login to a shell and execute a bunch of commands on the shell.
But to make it more readable, I'd like to place my code over multiple lines. How should I be doing this?
ssh -o <Option> -x -l <user> <host> " $long_command1; $long_command2; .... "
Thanks!

ssh is in fact just passing a string to the remote host. There this string is given to a shell which is supposed to interpret it (the user's login shell, which is typically something like bash). So whatever you want to execute needs to be interpretable by that remote login shell, that's the whole rule you have to stick to.
You can indeed just use newlines within the command string:
ssh alfe#sweethome "
ls /home/alfe/whatever
ping foreignhost
date
rm foobar
"

You can use the Here Documents feature of bash.
It is like:
ssh <remote-host> bash <<EOF
echo first command
echo second command
EOF
EOF marks the end of the input.
For further info: use man bash and search for Here Documents.
Edit: The only caveat is that using variables can be tricky, you have to escape the $ to protect them to be evaluated on the remote host rather then the local shell. Like \$HOSTNAME. Otherwise works with everything that is run from bash and uses stdin.

You can do like in the following example.
ssh -o <Option> -x -l <user> <host> '
pwd
whoami
ls
echo "$PATH"
'

Run 'export' command Over SSH

When I run the following from my bash shell:
bash -c '(export abc=123 && echo $abc)'
The output is "123". But when I run it over ssh:
ssh remote-host "bash -c '(export abc=123 && echo $abc)'"
There is no output. Why is this? Is there a way around this? That is, is there a way to set an environment variable for a command I run over ssh?
Note: When I replace echo $abc with something standard like echo $USER the ssh command prints out the username on the remote machine as expected since it is already set.
I am running RHEL 5 Linux with OpenSSH 4.3

That is because when using
ssh remote-host "bash -c '(export abc=123 && echo $abc)'"
the variable gets expanded by the local shell (as it is the case with $USER) before ssh executes. Escape the $ by using \$ and it should do fine
ssh remote-host "bash -c '(export abc=123 && echo \$abc)'"
On a side note:
You don't need to export just for this.
You don't need to wrap it in ()
Like so:
ssh remote-host "bash -c 'abc=123 && echo \$abc'"
Heck, you can even leave out the bash -c ... stuff, as the ssh manpage states:
If command is specified, it is executed on the remote host instead of a login shell.
But these may be specific to your task ;)

What is the cleanest way to ssh and run multiple commands in Bash?

I already have an ssh agent set up, and I can run commands on an external server in Bash script doing stuff like:
ssh blah_server "ls; pwd;"
Now, what I'd really like to do is run a lot of long commands on an external server. Enclosing all of these in between quotation marks would be quite ugly, and I'd really rather avoid ssh'ing multiple times just to avoid this.
So, is there a way I can do this in one go enclosed in parentheses or something? I'm looking for something along the lines of:
ssh blah_server (
ls some_folder;
./someaction.sh;
pwd;
)
Basically, I'll be happy with any solution as long as it's clean.
Edit
To clarify, I'm talking about this being part of a larger bash script. Other people might need to deal with the script down the line, so I'd like to keep it clean. I don't want to have a bash script with one line that looks like:
ssh blah_server "ls some_folder; ./someaction.sh 'some params'; pwd; ./some_other_action 'other params';"
because it is extremely ugly and difficult to read.

How about a Bash Here Document:
ssh otherhost << EOF
ls some_folder;
./someaction.sh 'some params'
pwd
./some_other_action 'other params'
EOF
To avoid the problems mentioned by #Globalz in the comments, you may be able to (depending what you're doing on the remote site) get away with replacing the first line with
ssh otherhost /bin/bash << EOF
Note that you can do variable substitution in the Here document, but you may have to deal with quoting issues. For instance, if you quote the "limit string" (ie. EOF in the above), then you can't do variable substitutions. But without quoting the limit string, variables are substituted. For example, if you have defined $NAME above in your shell script, you could do
ssh otherhost /bin/bash << EOF
touch "/tmp/${NAME}"
EOF
and it would create a file on the destination otherhost with the name of whatever you'd assigned to $NAME. Other rules about shell script quoting also apply, but are too complicated to go into here.

Edit your script locally, then pipe it into ssh, e.g.
cat commands-to-execute-remotely.sh | ssh blah_server
where commands-to-execute-remotely.sh looks like your list above:
ls some_folder
./someaction.sh
pwd;

To match your sample code, you can wrap your commands inside single or double qoutes. For example
ssh blah_server "
ls
pwd
"

I see two ways:
First you make a control socket like this:
ssh -oControlMaster=yes -oControlPath=~/.ssh/ssh-%r-%h-%p <yourip>
and run your commands
ssh -oControlMaster=no -oControlPath=~/.ssh/ssh-%r-%h-%p <yourip> -t <yourcommand>
This way you can write an ssh command without actually reconnecting to the server.
The second would be to dynamically generate the script, scping it and running.

This can also be done as follows.
Put your commands in a script, let's name it commands-inc.sh
#!/bin/bash
ls some_folder
./someaction.sh
pwd
Save the file
Now run it on the remote server.
ssh user#remote 'bash -s' < /path/to/commands-inc.sh
Never failed for me.

Put all the commands on to a script and it can be run like
ssh <remote-user>#<remote-host> "bash -s" <./remote-commands.sh

Not sure if the cleanest for long commands but certainly the easiest:
ssh user#host "cmd1; cmd2; cmd3"

This works well for creating scripts, as you do not have to include other files:
#!/bin/bash
ssh <my_user>#<my_host> "bash -s" << EOF
# here you just type all your commmands, as you can see, i.e.
touch /tmp/test1;
touch /tmp/test2;
touch /tmp/test3;
EOF
# you can use '$(which bash) -s' instead of my "bash -s" as well
# but bash is usually being found in a standard location
# so for easier memorizing it i leave that out
# since i dont fat-finger my $PATH that bad so it cant even find /bin/bash ..

SSH and Run Multiple Commands in Bash.
Separate commands with semicolons within a string, passed to echo, all piped into the ssh command. For example:
echo "df -k;uname -a" | ssh 192.168.79.134
Pseudo-terminal will not be allocated because stdin is not a terminal.
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda2 18274628 2546476 14799848 15% /
tmpfs 183620 72 183548 1% /dev/shm
/dev/sda1 297485 39074 243051 14% /boot
Linux newserv 2.6.32-431.el6.x86_64 #1 SMP Sun Nov 10 22:19:54 EST 2013 x86_64 x86_64 x86_64 GNU/Linux

The posted answers using multiline strings and multiple bash scripts did not work for me.
Long multiline strings are hard to maintain.
Separate bash scripts do not maintain local variables.
Here is a functional way to ssh and run multiple commands while keeping local context.
LOCAL_VARIABLE=test
run_remote() {
echo "$LOCAL_VARIABLE"
ls some_folder;
./someaction.sh 'some params'
./some_other_action 'other params'
}
ssh otherhost "$(set); run_remote"

For anyone stumbling over here like me - I had success with escaping the semicolon and the newline:
First step: the semicolon. This way, we do not break the ssh command:
ssh <host> echo test\;ls
^ backslash!
Listed the remote hosts /home directory (logged in as root), whereas
ssh <host> echo test;ls
^ NO backslash
listed the current working directory.
Next step: breaking up the line:
v another backslash!
ssh <host> echo test\;\
ls
This again listed the remote working directory - improved formatting:
ssh <host>\
echo test\;\
ls
If really nicer than here document or quotes around broken lines - well, not me to decide...
(Using bash, Ubuntu 14.04 LTS.)

The easiest way to configure your system to use single ssh sessions by default with multiplexing.
This can be done by creating a folder for the sockets:
mkdir ~/.ssh/controlmasters
And then adding the following to your .ssh configuration:
Host *
ControlMaster auto
ControlPath ~/.ssh/controlmasters/%r#%h:%p.socket
ControlMaster auto
ControlPersist 10m
Now, you do not need to modify any of your code. This allows multiple calls to ssh and scp without creating multiple sessions, which is useful when there needs to be more interaction between your local and remote machines.
Thanks to #terminus's answer, http://www.cyberciti.biz/faq/linux-unix-osx-bsd-ssh-multiplexing-to-speed-up-ssh-connections/ and https://en.wikibooks.org/wiki/OpenSSH/Cookbook/Multiplexing.

What is the cleanest way to ssh and run multiple commands in Bash?
I recommend using this escaping function. The function takes one argument - a function to escape. Then sshqfunc outputs declare -f of the function and then outputs a string that will call the function with "$#" arguments properly quoted. Then the whole is "%q" quoted and bash -c is added. In case the remote does not have bash, you could change bash to sh.
sshqfunc() { echo "bash -c $(printf "%q" "$(declare -f "$#"); $1 \"\$#\"")"; };
Then define a function with the work you want to do on the remote. The function is defined normally, so it will be properly "clean". You can test such function locally. After defining, properly escaped function is passed to the remote.
work() {
ls
pwd
echo "Some other command"
}
ssh host#something "$(sshqfunc work)"
Passing You can also pass arguments, and they will be passed to your function as positional arguments. The right next argument after the function will be assigned to $0 - usually a placeholder like -- or _ is used to separate arguments from call.
work() {
file=$1
num=$2
ls "$file"
echo "num is $num"
}
ssh host#something "$(sshqfunc work)" -- /this/file 5
But note that arguments should also be properly quoted if there are any magic characters:
ssh host#something "$(sshqfunc work)" -- "$(printf "%q" "$var1" "$var2")"

For simple commands you can use:
ssh <ssh_args> command1 '&&' command2
or
ssh <ssh_args> command1 \&\& command2

Resources