I am trying to fire up a vm via Vagrant using VirtualBox.
I got this error when I execute the command vagrant up (see below) using the latest versions of Virtual box 5.1.4 and Vagrant 1.7.4, therefore I downgraded Virtual box to 5.0 and Vagrant to 1.7.4 but it did not help.
I have installed the vagrant plugins vagrant-omnibus, vagrant-cashier and vagrant-berkshelf (version=4.1).
My OS is Mac OS X El Capitan and the vm that I am trying to run is a centos 6.
The final part of the output of the command "vagrant up" is:
default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
There was an error while executing `VBoxManage`, a CLI used by Vagrant
for controlling VirtualBox. The command and stderr is shown below.
Command: ["startvm", "63825f6b-5189-4b66-bb7a-167c7f742c49", "--type", "headless"]
Stderr: VBoxManage: error: The VM session was aborted
VBoxManage: error: Details: code NS_ERROR_FAILURE (0x80004005), component SessionMachine, interface Session
I googled this error and as many threads suggest I tried to restart VirtualBox, but I haven't had any success..
Below I copied the last few lines of the VM logs:
00:00:00.085763 APIC: Activating Local APIC
00:00:00.085782 CPUM: SetGuestCpuIdFeature: Enabled APIC
00:00:00.086115 PIT: mode=3 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:00.089080 Shared Folders service loaded
00:00:00.094857 DrvBlock: Flushes will be ignored
00:00:00.094868 DrvBlock: Async flushes will be passed to the disk
00:00:00.094970 VD: VDInit finished
00:00:00.095086 AIOMgr: Endpoint for file '/Users/daniele/VirtualBox VMs/my-vm_default_1475241914862_51348/centos-6.7-x86_64-disk1.vmdk' (flags 000c0723) created successfully
00:00:00.098079 VD: Opening the disk took 3191386 ns
00:00:00.098106 AHCI: LUN#0: disk, PCHS=16383/16/63, total number of sectors 83886080
00:00:00.098115 AHCI: LUN#0: using async I/O
00:00:00.098190 AHCI#0: Reset the HBA
00:00:00.098353 PIIX3 ATA: LUN#0: no unit
00:00:00.098358 PIIX3 ATA: LUN#1: no unit
00:00:00.098376 PIIX3 ATA: LUN#2: no unit
00:00:00.098380 PIIX3 ATA: LUN#3: no unit
00:00:00.098398 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:00.098411 PIIX3 ATA: Ctl#1: finished processing RESET
00:00:00.104664 NAT: Guest address guess set to 10.0.2.15 by initialization
I ran out of ideas
Possible Solution 1:
I'm troubleshooting the same problem but with another Linux distro. I found a workaround for Mint 18 that may work for you too.
When I go into VirtualBox, and set the troublesome VM's Settings>Network value to 'Bridged..' or 'NAT network', then the VM starts. Further, I can browse/curl the Internet from that running VM.
The VirtualBox forums show that others are getting this error too.
Possible Solution 2:
In my experiments, older VirtualBox versions don't have this network problem. For example, versions 5.0.24 and 5.0.18 allow VM creation with no need for manual intervention.
Additional Info:
It's worth noting, that if you use Docker Toolbox, it will silently upgrade VirtualBox to whatever version it wants (e.g. Docker Toolbox 1.12.2 forces VirtualBox to 5.1.6).
At first I thought this problem was caused by VirtualBox defaulting to "NAT" as the network choice. But that's not the cause. VirtualBox 5.0.24 and 5.018 both use "NAT" and they work fine.
It was a bug in VirtualBox, it is now fixed in 5.1.8.
For reference: https://www.virtualbox.org/ticket/15687
Related
Trying to run a CentOS 7 VM on Virtual Box using vagrant on my Fedora 35 machine.
On running the run the vagrant up & vagrant up --debug commands I get the following message as output.
There was an error talking to Libvirt. The error message is shown
below:
Call to virDomainCreateWithFlags failed: internal error: /usr/libexec/qemu-bridge-helper --use-vnet --br=virbr0 --fd=27: failed to communicate with bridge helper: Transport endpoint is not connected
stderr=failed to get mtu of bridge `virbr0': No such device
So I was making a rookie mistake of not properly defining the VM provider in vagrant up command. Running vagrant up --provider virtualbox fixed this issue.
Here is cmd error, I can't understand where is error and I'm bumping on it again and again, can`t solve it.
$ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Preparing master VM for linked clones...
default: This is a one time operation. Once the master VM is prepared,
default: it will be used as a base for linked clones, making the creation
default: of new VMs take milliseconds on a modern system.
==> default: Importing base box 'hashicorp/bionic64'...
There was an error while executing `VBoxManage`, a CLI used by Vagrant
for controlling VirtualBox. The command and stderr is shown below.
Command: ["import", "\\\\?\\C:\\HashiCorp\\boxes\\hashicorp-VAGRANTSLASH-bionic64\\1.0.282\\virtualbox\\box.ovf", "--vsys", "0", "--vmname", "ubuntu-18.04-amd64_1574870798285_57998", "--vsys", "0", "--unit", "11", "--disk", "C:/Users/\u256C\u044B\u0445\u0443/VirtualBox VMs/ubuntu-18.04-amd64_1574870798285_57998/ubuntu-18.04-amd64-disk001.vmdk"]
Stderr: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Interpreting \\?\C:\HashiCorp\boxes\hashicorp-VAGRANTSLASH-bionic64\1.0.282\virtualbox\box.ovf...
OK.
0%...
Progress state: E_INVALIDARG
VBoxManage.exe: error: Appliance import failed
VBoxManage.exe: error: Code E_INVALIDARG (0x80070057) - One or more arguments are invalid (extended info not available)
VBoxManage.exe: error: Context: "enum RTEXITCODE __cdecl handleImportAppliance(struct HandlerArg *)" at line 957 of file VBoxManageAppliance.cpp
I experienced the same issue and solved it by changing VirtualBox's base VM folder:
Open VirtualBox
Go to File -> Preferences
In the General tab, change the Default Machine Folder path to an existing path.
Run vagrant up again
In my case VirtualBox's Default Machine Folder was still pointing to my external hard drive which was no longer connected. Manually importing the Vagrant downloaded .ovf file in VBox via File -> Import Virtual Appliance lead me to the above solution. Vagrant does the same thing under the hood.
I got the same issue and stumbled for several hours. Finally, it worked from the following steps.
My C drive didn't have enough memory for the Vagrant to bring up the Virtual box. Cleared the memory for Vagrant. It all worked well without any issues.
free enough space in your drive C :
make sure it's C:\\HashiCorp\\boxes\\hashicorp-VAGRANTSLASH-bionic64\\1.0.282 up to date
I had the same issue. I had follow the instructions to change the default machine folder to the same path as the one set for environment variable for VAGRANT_HOME
Open VirtualBox
Go to File -> Preferences
In the General tab, change the Default Machine Folder path to an existing path.
Run vagrant up again
you can check PATH below,if has blank or special character, change it.
Vagrant install PATH
VirtualBox install PATH
$VAGRANT_HOME PATH
VirtualBox default Virtual Machine location PATH
Also, free enough space $VAGRANT_HOME and VirtualBox default Virtual Machine location
I've been having a problem with Vagrant (1.8.1, using VirtualBox 5.0.20) on Windows 10.
When I follow the getting started tutorial https://www.vagrantup.com/docs/getting-started/ after I have typed vagrant up, my console is stuck on:
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2200
default: SSH username: vagrant
default: SSH auth method: private key
It does not continue, i can see the VM boot inside of VirtualBox, and i can use the VirtualBox GUI to log in with the default credentials, so the VM itself is working.
According to https://www.vagrantup.com/docs/virtualbox/common-issues.html
I should run VirtualBox as admin and do vagrant up from a cmd.exe with admin rights, but when i do that i get the message:
There was an error while executing `VBoxManage`, a CLI used by Vagrant
for controlling VirtualBox. The command and stderr is shown below.
Command: ["modifyvm", "1b9d4f9b-04d8-48bf-8d16-d3aed99d341b", "--natpf1", "delete", "ssh"]
Stderr: VBoxManage.exe: error: Code E_FAIL (0x80004005) - Unspecified error (extended info not available)
VBoxManage.exe: error: Context: "LockMachine(a->session, LockType_Write)" at line 493 of file VBoxManageModifyVM.cpp
This seems different from the 100's of posts all around the net like these:
https://github.com/Varying-Vagrant-Vagrants/VVV/issues/375
since I am not getting antying after the output listed above, it just sits there and after alike 10 minutes it comes up with the message:
Timed out while waiting for the machine to boot. This means that
Vagrant was unable to communicate with the guest machine within
the configured ("config.vm.boot_timeout" value) time period.
If you look above, you should be able to see the error(s) that
Vagrant had when attempting to connect to the machine. These errors
are usually good hints as to what may be wrong.
If you're using a custom box, make sure that networking is properly
working and you're able to connect to the machine. It is a common
problem that networking isn't setup properly in these boxes.
Verify that authentication configurations are also setup properly,
as well.
If the box appears to be booting properly, you may want to increase
the timeout ("config.vm.boot_timeout") value.
I've also read Vagrant stuck in "Waiting for VM to Boot" but it did not help me.
Is there anything else I am missing here?
In my case, vagrant up was hanging on 'Syncing VM folder' , on Windows 7 with Vagrant 1.9.3 and VBox 5.1.18 . It turned out that it requires Powershell >= 3.0.
I downloaded it from https://www.google.ca/search?q=powershell+3.0+download&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&ei=x0fdWLfsBubQXu2OorAD, and worked fine afterwards.
try to turn off the VM from VirtualBox or from command line
C:\Progra~1\Oracle\VirtualBox\VBoxManage.exe controlvm default poweroff
then restart the VM from vagrant.
In case you get an error when powering off the VM, force the shutdown
C:\Progra~1\Oracle\VirtualBox\VBoxManage.exe startvm default --type emergencystop
Then vagrant up will should work nicely
I actually already found my problem. It was a .dll from some addware scanner that was preventing the virtualbox VM from starting. I lost the link to the forum topic which helped me solve this unfortunately.
What i did was open the logs from the VM in VirtualBox and had a read trough. At some point, a line indicating an error appeared with a .dll name which was the culprit. I deleted the offending .dll files from my pc and it was fixed.
If i find the link again to the topic explaining exactly what dll it was i will post it here. Im not at the machine that i fixed the problem on now so i can't access my search history.
Hope it will work for you as it worked for me
I'm still investigating why, but as a solution it works.
our case - when typed in cmd (inside vagrand image directory) "vagrant up"
it open virtual box vm and stuck on "default: SSH auth method:
private key" as mentioned in question
so fix by this steps:
open manually virtual box (besides what already opened by vagrant up)
run the vm that had added to the list (by vagrant up)
open CMD
type "Vagrant ssh"
and it will work
hope it helped,
best regards
I've tried several times to start the Docker VM via the Docker Quickstart Terminal. After deleting the default virtual machine in VirtualBox I receive the following output
Creating Machine default...
Running pre-create checks...
Creating machine...
(default) OUT | Creating VirtualBox VM...
(default) OUT | Creating SSH key...
(default) OUT | Starting VirtualBox VM...
Error creating machine: Error in driver during machine creation: exit status 1
Looks like something went wrong... Press any key to continue...
To troubleshoot further, I attempted to start the default machine in the VirtualBox GUI directly using Start > Headless Start, as suggested in other Docker issues. The startup failed and I received an error dialog box with the content:
Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter' (VERR_INTNET_FLT_IF_NOT_FOUND).
Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND).
Result Code:
E_FAIL (0x80004005)
Component:
ConsoleWrap
Interface:
IConsole {872da645-4a9b-1727-bee2-5585105b9eed}
Versions of related components:
VirtualBox Version 5.0.11 r104393
Docker Toolbox 1.9.1a
Windows 10 Version 1511 (OS Build 10586.14)
One of the answers to this question solved my problem. Here it is with a few edits:
I found a solution
Open Windows Network Connections
Right click on VirtualBox Host only adapter that was created
Choose properties
Check "VirtualBox NDIS6 Bridged Networking driver"
Disable and Enable the highlighted item
For me "VirtualBox NDIS6 Bridged Networking Driver" was not checked. I checked it and clicked OK to close the Properties window. After that, the Docker Quickstart Terminal was able to start the VM successfully.
The same thing happened to me. At this moment I am using Windows Home.
At least in my case, what happened was that the environment variables DOCKER_MACHINE and DOCKER_TOOLBOX_INSTALL_PATH were not created for the system.
I just had to add them and it worked.
I tried to follow #chris-hunt answer, but I didn't found the highlighted item. I realized it was due to the fact I didn't installed the VirtualBOX that comes in the Docket Tools installation. I think I was using an older version.
So I uninstalled docker tools AND VitualBOX, both on windows Control Panel. After that, I reinstalled Docker Tools with the VirtualBOX checked, and it finally worked.
I am setting up my previously working vagrant environment in Windows 10. I've updated to the newest version of both VirtualBox (https://www.virtualbox.org/ticket/14040) and Vagrant.
When I vagrant up I get an error: Cannot rename this connection. A connection with the name you specified already exists. Specify a different name.
I've since tried deleting all of my boxes, deleting the .vagrant and .virtualbox directories, reinstalling both virtualbox and vagrant. Yet, I always get the same error. Here is the error message from my console:
The guest machine entered an invalid state while waiting for it
to boot. Valid states are 'starting, running'. The machine is in the
'poweroff' state. Please verify everything is configured
properly and try again.
If the provider you're using has a GUI that comes with it,
it is often helpful to open that and watch the machine, since the
GUI often has more helpful error messages than Vagrant can retrieve.
For example, if you're using VirtualBox, run vagrant up while the
VirtualBox GUI is open.
The primary issue for this error is that the provider you're using
is not properly configured. This is very rarely a Vagrant issue.
I had the same issue with Scotchbox, and even after installing the test build the issue was still there.
This is how I fixed the issue.
Step 1: Download and install https://www.virtualbox.org/attachment/ticket/14040/VBox-Win10-fix-14040.exe and leave it running in the background
Step 2: Head to the Virtual box program files ( C:\Program Files\Oracle\VirtualBox ).
Step 3: Go to compatibility for these three .exe ( Virtualbox.exe, VBoxHeadless.exe, and VBoxManage.exe ) and choose windows 7.
Then just run vagrant up again and it should work.
Right, I've spent a lot of time trying to resolve this. And I finally came across a post on the laracasts forum:
I've been able to get Homestead up and running after a day of troubleshooting with the following steps:
Installed the VirtualBox 5.0.1 test build
https://www.virtualbox.org/download/testcase/VirtualBox-5.0.1-101902-Win.exe
Information at: https://www.virtualbox.org/ticket/14040
I also reinstalled Vagrant 1.7.4
This solved the initial issue with VirtualBox, but presented another
issue. When I attempted to "vagrant up" I would get a pop-up error
message from VirtualBox about not being able to rename the connection,
the VM wouldn't boot, and I would get the error message that
#antonybudianto posted in terminal.
I applied a suggestion made by Venimus in this thread:
https://github.com/mitchellh/vagrant/issues/6059
I edited line 17 in /Homestead/scripts/homestead.rb as follows:
config.vm.network "private_network", ip: "192.168.10.10", name: "VirtualBox Host-Only Ethernet Adapter #3"
Apparently the trick is to include the name of the host-only adapter
that you've already set up in VirtualBox. By doing this, you prevent
Vagrant from attempting to rename the connection. You just need to
make sure that the name matches the name of your adapter in Windows.
Also, go into the VirtualBox GUI and make sure that the host-only
adapter is on the same network, but not the same ip. My homestead is
192.168.10.10, my VirtualBox host-only adapter is set to 192.168.10.9.
This seems to be working well for me, and has the advantage of not
changing your Vagrant install at all. It's a Homestead-only
modification.
https://laracasts.com/discuss/channels/general-discussion/windows-10-vagrant-virtualbox-homestead/replies/87037
It has worked for me. Do note this part:
You just need to make sure that the name matches the name of your
adapter in Windows. Also, go into the VirtualBox GUI and make sure
that the host-only adapter is on the same network, but not the same
ip. My homestead is 192.168.10.10, my VirtualBox host-only adapter is
set to 192.168.10.9.
Hope it helps.
You have to uncheck the actual Ethernet network adapter by click rightclick >> Properties>> uncheckbox for virtualBox NDIS6 Brdige Networking Drive
so you have to check that checkbox on Virtual adapter only
This problem appears on my Windows 7, using vagrant 1.9.6 and VirtualBox 5.1.22.
The problem was that I previously removed some of the Host-Only adapters.
A workaround for this problem was to change the IPv4 address of existing Host-Only adapter to match the VagrantFile configuration:
look for IP in Vagrantfile for config.vm.network:
config.vm.network "private_network", ip: "192.168.42.10"
modify the IPv4 address of existing Host-only adapter to match the IP. Got to VirtualBox -> File -> Preferences -> Network -> Host-only Networks - > right click on VirtualBox Host-Only Ethernet Adapter (Edit Host-only Network). Change IPv4 address to:
192.168.42.1
Uninstall VirtualBox using CCLeaner then remove virtual adapter if it still exist from network and sharing center. For remove try using Device Manager and find networks and find the virtualbox adapters and remove them.
Then finally install it and don't launch it. Go to installation folder and right click on it and run it as Administrator.
:)
Njoy... Happy coding. :)