I have been developing inside a container with visual-studio-code on Windows 10 with the Remote - Containers plugin. I used this guide to setup my ssh-agent and add my git credentials from windows 10 to the environment inside the container. But when I try to push or pull from a private repo github in that environment I receive the following error.
agent key RSA SHA256:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX+64 returned incorrect signature type
This does not seem to affect my ability to access my private repo on github, but the warning still seems like something I should be taking seriously. I am still able to use git on windows 10 without getting any errors. This only occurs if I use visual studio's remote-containers plugin with my Dockerfile, otherwise I'm not able to access the private repo at all due to my git credentials not being added to the container.
I've looked at some other SO questions here and here and tried the regenerating my ssh-key using openssh on the windows side which did not seem to fix the problem. I've been using node:12.18-alpine3.12 as my base image and I've been installing openssh in my Dockerfile using
apk update && apk upgrade && apk add --no-cache openssh
so I'm assuming openssh should be a recent enough version.
I think this might be a plugin issue with vscode? I don't really know.
I installed Git for Windows in order to clone and pull a project hosted on a remote Linux server.
In my repository (D:/repositories/my-project) I launch the following commands
git clone server#192.168.56.101:/var/www/web/my-project/.git
git pull origin master
So far so good. I pull the project files whenever modifications are applied on the server.
But now I'd like to pull or push from the remote server to my local repository.
I tried many things but I can't figure out how to access the repository located on my local machine.
Things like:
git pull duddy#my-pc:/d/repositories/my-project/.git master
just doesn't work, Git says:
ssh: Could not resolve hostname my-pc: Name or service not known
fatal: Could not read from remote repository.
Can someone helps me ?
First things first, I would recommend you try simply running git pull.
If this doesn't work, try running git remote -v and check to make sure that the URL for your server is listed as an origin (server#192.168.56.101:/var/www/web/my-project/.git).
Your issue is that you are inputting the URL for your local repository in your attempt to git pull.
I suggest reading the git-pull documentation to learn more about how pull works.
Basically, you need to have some service at your workstation which serves the requests. There are following options (I did not try most of them myself, just making it up from what I know):
use the windows file access. This is the easiest to setup at the windows workstation - just share the repository folder. The Linux side should somehow be able to mount windows shares (like described, for example, here: https://wiki.ubuntu.com/MountWindowsSharesPermanently). If you manage to mount your \\my-pc\repo to some /mount/my-pc-repo, then you can access it as file:///mount/my-pc-repo.
run git daemon at windows. Set up instructions are available at SO (for example, https://stackoverflow.com/a/2275844/2303202) and it pretty straightforward, but it does not have any authentication and in most cases it is reasonable to use it only for reading, so you will not be able to push to the workstation, only fetch.
set up ssh daemon and access through ssh authentication with read-write access. Git for windows installation contains the needed software (the sshd.exe binary, it is there at least for Git for Windows 2.6.0), probably there is a way to utilize it but I could not find it quickly.
set up HTTP(S) service at your workstation. I don't know if it is possible to do only with Git for Windows (it might be, with some perl module which happen to be included with it), or you should use some other software.
I need some help here, It's been a week I'm with this problem, can't figure out what's going on. I'm not able to clone a git repo from a slave node (Jenkins). I added the ssh key, host and slave (I've already tried generating a single key and one for each virtual and host)).
On Jenkins:
url:git#github.com: < repo>
Credentials: Here I tried with username/password, username with ssh file, username with ssh key directly, and -none-.
It doesn't seems like there is an authentication problem since I can clone the repo manually from console (both, slave and host). I can also connect with
ssh -T git#github.com
so the ssh key is fine, but when I build, this appear on console:
Building remotely on IE10Win7 in workspace C:\Users\IEUser\Desktop\<
folder >
Wiping out workspace first.
Cloning the remote Git repository
Cloning repository git#github.com:< repo>.git
git init C:\Users\IEUser\Desktop\< folder> # timeout=10
ERROR: Error cloning remote repo 'origin'
ERROR: Error cloning remote repo 'origin'
Performing Post build task...
Does anyone have an idea? Hope someone can give me a clue, Thanks!
I fixed this problem by setting the slave node tool path, selecting git and setting its value to
C:\Program Files (x86)\Git\bin\git.exe
Location: Configure Node - Tool Locations
I recently updated several jenkins plugins and had this problem after the updates. Rolling back the git plugin didn't help, but I did a few other things to get it working. I listed all three here, but it was probably (2) that fixed the problem. Apparently the git executable was reset to default. So, configuring the git executable within the specific project was probably all that was needed. However the other items might come in handy too.
(1) The default git on a jenkins linux install geenrally points to /usr/lib... You need to specify a separate GitForWindows that points to the windows version:
Manage Jenkins
Configure System
Under Git - Git Installations
Add Git -> Git
Give it a name to be referenced in projects
(mine is WindowsGit)
Set Path to Git Executable
(mine is "C:\Program Files (x86)\Git\bin\git.exe")
(for recent git the path is "C:\Program Files\Git\bin\git.exe")
(2) Configure git on the specific project:
Select the project
Select Configure
Under Source Code Management - Git
Select Git Executable as configured in 1)
Set credentials or add new (ssh keys, etc)
(3) Updating the jenkins slave service to run as a specific user:
Go to Windows Services on the slave -- StartMenu, type "services"
Select the Jenkins Slave service in the list on the right
Right-click and select "Properties" of the Jenkins Slave service
Select the "Log On" tab
Update the username and password used in manual tests
Domain login can be specificied with <DOMAIN>\<USERNAME>
Local logins just use <USERNAME>
OK to save and exit
Right-click again and select "Restart" to make the changes active.
I found a decent workaround in my case. The git clone command always inherits its process owner, which may make a difference, even if the two owners of Jenkins (SYSTEM) and cmd (USER) seem to have the same rights on your system. All other configurations were identical (keys, knownhosts, Git client version).
So as far as I can see, calling git clone from cmd will succeed because it calls the remote as USER, whereas git clone called from Jenkins may be rejected because it calls the remote as SYSTEM. In Services, where you would typically start Jenkins through the GUI, you can configure the service to run as a different user (right click on service --> Properties --> Log On). I had to put it like USER#DOMAIN, e.g. Jenkins#company.local or so. I'm not sure about how a cmd parameter would look, but I'd expect there to be one.
Also, I don't quite know what difference this workaround makes in the end, because on my Jenkins, SYSTEM and USER are configured to have the same rights across the system and they are of course both recognized as "Jenkins" by remote. Still, it does the trick for me. Deeper insights welcome.
I was facing similar problem and found that I need to add git to my PATH environment variable for a Windows based slave. I think that #dhj suggestion 2 might work as well in this case.
I found this workaround on Jenkins Jira.
In my case, I started getting this exact error after updating Git on some of my build machines (via Chocolatey, using the "git.install" package) from 1.9.4 to 2.5.0. The old 1.9.4 install was a 32-bit package but the new one is a 64-bit one, so the default install location switched from C:\Program Files (x86)\Git to C:\Program Files\Git. I had the 64-bit path configured on the Jenkins master (since it had the newer Git version), but some slaves still had the older 32-bit version installed, so the slaves were attempting to use an incorrect path. I could have overridden the Git path for individual slaves but the cleaner solution for me was simply to upgrade all the slaves to the newer 64-bit version.
I tried most of the above:
Specify git location.
Set service user.
Run as Administrator.
None of it worked. Eventually decided to uninstall git64 and install git32... changed the git path to the new location (in x86 Program Files). And everything worked.
I ran into this issue recently.
We had some items in our PATH EV which we had added when trying to connect Winium and Selenium to our Jenkins instance.
We removed these items, but still Jenkins seemed to be holding on to the values. After a bit of troubleshooting: restarting Jenkins; restarting the Jenkins server; setting the EVs at the node level; etc., we restarted the Jenkins JNLP service on the Windows slave.
And they lived happily ever after.
I also got the same error and fixed by adding a git path in the "Manage Jenkins -> Global Tool Configuration".
In my env, The windows Jenkins master run a job on the ubuntu slave machine, the master machine has used the default git ('C:\Program Files\Git\git.exe') path and the slave machine has used the git ('/usr/bin/git') path, therefore, I configured slave git path into the master configuration '/usr/bin/git' and its start working for me
I get this error when configuring git repo in a new jenkins project:
Failed to connect to repository : Error performing command: ls-remote -h file:///c:\Dev\git\rx HEAD
I have a local git repo on my windows machine and cloning the same path from command prompt works on the same machine. I don't know what could be the problem (git.exe is on system path)
Windows installs Jenkins as a service. But it runs the Jenkins service under different user permissions that don't have access to GIT. You can follow this link to find the user that Jenkins runs under. http://antagonisticpleiotropy.blogspot.com/2012/08/running-jenkins-in-windows-with-regular.html
For example. My local user name on my windows is "nathandrewsire", exclude the quotes. Open windows services manager (either cmd and c:\services.msc, OR use windows key + R). Enable Log On > This account:. Then type in .\username (e.g. .\nathandrewsire). Then restart the service and you will have access to GIT from Jenkins builds.
I also found a snippet for windows shell command that will output the user to verify it.
echo %PATH%
echo %USERDOMAIN%\%USERNAME%
http://antagonisticpleiotropy.blogspot.com/2012/08/running-jenkins-in-windows-with-regular.html
Linux
If you're using Linux, this error can also be caused from not enabling share on your Git repo. Linux jenkins user won't be able to access Git report under another user unless....
git --bare init --shared=group
Also, your jenkins user and Git repo user must belong to the same group for file permission access. There's other alternatives to that like messing with umasks and ACL's but setting up a linux group for your two users is the easiest way.
Make sure NOT TO OVERWRITE your Git repo with the bare init command. If you already have a Git repo, you'll need to setup/move to a new one with the shared option. I didn't see a way to convert existing repos to shared because I am guessing the files would all need to be updated?
NOTE***
I used VMWare Workstation shared folders to build on a windows guest. Jenkins needs the following format when entering the Git repo.
//vmware-host/Shared Folders/vm-share/ridcyDevelopment.git/
Unable to get Jenkins and Git to play nice
I have git installed on my local windows 7 PC. I can commit there.
I have git installed on my linux dev server. I can commit there.
I have successfully cloned to each machine a github repository. So they seem to be working in that sense. But I'd like to be able to push from my PC to the dev server.
I believe that I am missing a crucial piece of info here and can't find any tutorials, questions answered on how to set this up.
I have a few questions:
I was led to believe that I don't NEED to set up ssh keys to do this, I will just be prompted for a password.
My site was developed in php, is it possible to push to the linux server and have the live dev site continue running, with the new changes?
Here is how I'm currently trying to clone from my linux server and the response... (i changed the IP address)
C:\DevEnv>git clone 0.0.0.0:gitrepo.git
Cloning into 'gitrepo'...
fatal: The remote end hung up unexpectedly
I have a directory called gitrepo.git that has a repository.
I also tried creating a repository in the home dir of mysite.com. When I try cloning that from my PC this is what happens:
C:\DevEnv>git clone http://mysite.com
Cloning into 'mysite.com'...
fatal: http://mysite.com/info/refs not valid: is this a git repository?
I've read through many tutorials and they mostly talk about either really really basic concepts, or how to push/pull to github, or just skip over certain settings so when I follow them I get fatal: The remote end hung up unexpectedly...
Any help, point in the right direction would be most appreciated!
You may need to provide your username. For example:
$ git clone myusername#myhost.com:/opt/git/project.git
Or you could setup a samba-share on the Linux box and share your git-repo, mount the share in windows and clone it from the filesystem.
More info about setting up git on a server:
http://progit.org/book/ch4-0.html
Check path to your project.
Try to clon via git protocol:
C:\DevEnv>git clone git://0.0.0.0/gitrepo.git