Hello i need a little help with my personal project i have something like this:
sourceFile:
something,something,something,something,something,someth ing,
something,something,something,something,something,somethi ng,
something,something,something,something,something,someth ing,
I need to write my variable after the last , in specific line (i have different value for every line)
resultFile:
something,something,something,something,something,someth ing,result1
something,something,something,something,something,somethi ng,result2
something,something,something,something,something,someth ing,result3
I used this:
sed -i "$numberOfLine,/,/ s/,/,$actualDeparture/6" $fileName
but the result is:
badResultFile:
something,something,something,something,something,someth ing,result1
something,something,something,something,something,somethi ng,result2result1
something,something,something,something,something,someth ing,result3result2
I don't know why i have result2 and result1 in second line and i'm really
desperate, because i don't know hoiw to fix this.
I would use awk:
awk '{ print $0 "result" NR }' sourceFile
print $0 "result" NR prints each line, then string result, and then each line (record) number (NR)
Example:
% cat file.txt
something,something,something,something,something,something,
something,something,something,something,something,something,
something,something,something,something,something,something,
% awk '{ print $0 "result" NR }' file.txt
something,something,something,something,something,something,result1
something,something,something,something,something,something,result2
something,something,something,something,something,something,result3
With your address range $numberOfLine,/,/ all lines starting from $numberOfLine to next line containing , are processed.
And you don't need to count number of , in your s command, just replace $(end of line) with your variable value.
To process each line individually, try this:
sed -i "$numberOfLine s/$/$actualDeparture/" "$fileName"
Related
Using bash how do I find a string and update the string next to it for example pass value
my.site.com|test2.spin:80
proxy_pass.map
my.site2.com test2.spin:80
my.site.com test.spin:8080;
Expected output is to update proxy_pass.map with
my.site2.com test2.spin:80
my.site.com test2.spin:80;
I tried using awk
awk '{gsub(/^my\.site\.com\s+[A-Za-z0-9]+\.spin:8080;$/,"my.site2.comtest2.spin:80"); print}' proxy_pass.map
but does not seem to work. Is there a better way to approch the problem. ?
One awk idea, assuming spacing needs to be maintained:
awk -v rep='my.site.com|test2.spin:80' '
BEGIN { split(rep,a,"|") # split "rep" variable and store in
site[a[1]]=a[2] # associative array
}
$1 in site { line=$0 # if 1st field is in site[] array then make copy of current line
match(line,$1) # find where 1st field starts (in case 1st field does not start in column #1)
newline=substr(line,1,RSTART+RLENGTH-1) # save current line up through matching 1st field
line=substr(line,RSTART+RLENGTH) # strip off 1st field
match(line,/[^[:space:];]+/) # look for string that does not contain spaces or ";" and perform replacement, making sure to save everything after the match (";" in this case)
newline=newline substr(line,1,RSTART-1) site[$1] substr(line,RSTART+RLENGTH)
$0=newline # replace current line with newline
}
1 # print current line
' proxy_pass.map
This generates:
my.site2.com test2.spin:80
my.site.com test2.spin:80;
If the input looks like:
$ cat proxy_pass.map
my.site2.com test2.spin:80
my.site.com test.spin:8080;
This awk script generates:
my.site2.com test2.spin:80
my.site.com test2.spin:80;
NOTES:
if multiple replacements need to be performed I'd suggest placing them in a file and having awk process said file first
the 2nd match() is hardcoded based on OP's example; depending on actual file contents it may be necessary to expand on the regex used in the 2nd match()
once satisified with the result the original input file can be updated in a couple ways ... a) if using GNU awk then awk -i inplace -v rep.... or b) save result to a temp file and then mv the temp file to proxy_pass.map
If the number of spaces between the columns is not significant, a simple
proxyf=proxy_pass.map
tmpf=$$.txt
awk '$1 == "my.site.com" { $2 = "test2.spin:80;" } {print}' <$proxyf >$tmpf && mv $tmpf $proxyf
should do. If you need the columns to be lined up nicely, you can replace the print by a suitable printf .... statement.
With your shown samples and attempts please try following awk code. Creating shell variable named var where it stores value my.site.com|test2.spin:80 in it. which further is being passed to awk program. In awk program creating variable named var1 which has shell variable var's value in it.
In BEGIN section of awk using split function to split value of var(shell variable's value container) into array named arr with separator as |. Where num is total number of values delimited by split function. Then using for loop to be running till value of num where it creates array named arr2 with index of current i value and making i+1 as its value(basically 1 is for key of array and next item is value of array).
In main block of awk program checking condition if $1 is in arr2 then print arr2's value else print $2 value as per requirement.
##Shell variable named var is being created here...
var="my.site.com|test2.spin:80"
awk -v var1="$var" '
BEGIN{
num=split(var1,arr,"|")
for(i=1;i<=num;i+=2){
arr2[arr[i]]=arr[i+1]
}
}
{
print $1,(($1 in arr2)?arr2[$1]:$2)
}
' Input_file
OR in case you want to maintain spaces between 1st and 2nd field(s) then try following code little tweak of Above code. Written and tested with your shown samples Only.
awk -v var1="$var" '
BEGIN{
num=split(var1,arr,"|")
for(i=1;i<=num;i+=2){
arr2[arr[i]]=arr[i+1]
}
}
{
match($0,/[[:space:]]+/)
print $1 substr($0,RSTART,RLENGTH) (($1 in arr2)?arr2[$1]:$2)
}
' Input_file
NOTE: This program can take multiple values separated by | in shell variable to be passed and checked on in awk program. But it considers that it will be in format of key|value|key|value... only.
#!/bin/sh -x
f1=$(echo "my.site.com|test2.spin:80" | cut -d'|' -f1)
f2=$(echo "my.site.com|test2.spin:80" | cut -d'|' -f2)
echo "${f1}%${f2};" >> proxy_pass.map
tr '%' '\t' < proxy_pass.map >> p1
cat > ed1 <<EOF
$
-1
d
wq
EOF
ed -s p1 < ed1
mv -v p1 proxy_pass.map
rm -v ed1
This might work for you (GNU sed):
<<<'my.site.com|test2.spin:80' sed -E 's#\.#\\.#g;s#^(\S+)\|(\S+)#/^\1\\b/s/\\S+/\2/2#' |
sed -Ef - file
Build a sed script from the input arguments and apply it to the input file.
The input arguments are first prepared so that their metacharacters ( in this case the .'s are escaped.
Then the first argument is used to prepare a match command and the second is used as the value to be replaced in a substitution command.
The result is piped into a second sed invocation that takes the sed script and applies it the input file.
I have spent hours trying to solve this. There are a bunch of answers as to how to prepend to all lines or specific lines but not with a variable text and a variable number.
while [ $FirstVariable -lt $NextVariable ]; do
#sed -i "$FirstVariables/.*/$FirstVariableText/" "$PWD/Inprocess/$InprocessFile"
cat "$PWD/Inprocess/$InprocessFile" | awk 'NR==${FirstVariable}{print "$FirstVariableText"}1' > "$PWD/Inprocess/Temp$InprocessFile"
FirstVariable=$[$FirstVariable+1]
done
Essentially I am looking for a particular string delimiter and then figuring out where the next one is and appending the first result back into the following lines... Note that I already figured out the logic I am just having issues prepending the line with the variables.
Example:
This >
Line1:
1
2
3
Line2:
1
2
3
Would turn into >
Line1:
Line1:1
Line1:2
Line1:3
Line2:
Line2:1
Line2:2
Line2:3
You can do all that using below awk one liner.
Assuming your pattern starts with Line, then the below script can be used.
> awk '{if ($1 ~ /Line/ ){var=$1;print $0;}else{ if ($1 !="")print var $1}}' $PWD/Inprocess/$InprocessFile
Line1:
Line1:1
Line1:2
Line1:3
Line2:
Line2:1
Line2:2
Line2:3
Here is how the above script works:
If the first record contains word Line then it is copied into an awk variable var. From next word onwards, if the record is not empty, the newly created var is appended to that record and prints it producing the desired result.
If you need to pass the variables dynamically from shell to awk you can use -v option. Like below:
awk -v var1=$FirstVariable -v var2=$FirstVariableText 'NR==var{print var2}1' > "$PWD/Inprocess/Temp$InprocessFile"
The way you addressed the problem is by parsing everything both with bash and awk to process the file. You make use of bash to extract a line, and then use awk to manipulate this one line. The whole thing can actually be done with a single awk script:
awk '/^Line/{str=$1; print; next}{print (NF ? str $0 : "")}' inputfile > outputfile
or
awk 'BEGIN{RS="";ORS="\n\n";FS=OFS="\n"}{gsub(FS,OFS $1)}1' inputfile > outputfile
I have this format:
host1,app1
host1,app2
host1,app3
host2,app4
host2,app5
host2,app6
host3,app1
host4... and so on.
I need it like this format:
host1;app1,app2,app3
host2;app4,app5,app6
I have tired this: awk -vORS=, '{ print $2 }' data | sed 's/,$/\n/'
and it gives me this:
app1,app2,app3 without the host in front.
I do not want to show duplicates.
I do not want this:
host1;app1,app1,app1,app1...
host2;app1,app1,app1,app1...
I want this format:
host1;app1,app2,app3
host2;app2,app3,app4
host3;app2;app3
With input sorted on the first column (as in your example ; otherwise just pipe it to sort), you can use the following awk command :
awk -F, 'NR == 1 { currentHost=$1; currentApps=$2 }
NR > 1 && currentHost == $1 { currentApps=currentApps "," $2 }
NR > 1 && currentHost != $1 { print currentHost ";" currentApps; currentHost=$1; currentApps=$2 }
END { print currentHost ";" currentApps }'
It has the advantage over other solutions posted as of this edit to avoid holding the whole data in memory. This comes at the cost of needing the input to be sorted (which is what would need to put lots of data in memory if the input wasn't sorted already).
Explanation :
the first line initializes the currentHost and currentApps variables to the values of the first line of the input
the second line handles a line with the same host as the previous one : the app mentionned in the line is appended to the currentApps variable
the third line handles a line with a different host than the previous one : the infos for the previous host are printed, then we reinitialize the variables to the value of the current line of input
the last line prints the infos of the current host when we have reached the end of the input
It probably can be refined (so much redundancy !), but I'll leave that to someone more experienced with awk.
See it in action !
$ awk '
BEGIN { FS=","; ORS="" }
$1!=prev { print ors $1; prev=$1; ors=RS; OFS=";" }
{ print OFS $2; OFS=FS }
END { print ors }
' file
host1;app1,app2,app3
host2;app4,app5,app6
host3;app1
Maybe something like this:
#!/bin/bash
declare -A hosts
while IFS=, read host app
do
[ -z "${hosts["$host"]}" ] && hosts["$host"]="$host;"
hosts["$host"]+=$app,
done < testfile
printf "%s\n" "${hosts[#]%,}" | sort
The script reads the sample data from testfile and outputs to stdout.
You could try this awk script:
awk -F, '{a[$1]=($1 in a?a[$1]",":"")$2}END{for(i in a) printf "%s;%s\n",i,a[i]}' file
The script creates entries in the array a for each unique element in the first column. It appends to that array entry all element from the second column.
When the file is parsed, the content of the array is printed.
I have a specific word, and I would like to find out what line number in my file that word appears on.
This is happening in a c shell script.
I've been trying to play around with awk to find the line number, but so far I haven't been able to. I want to assign that line number to a variable as well.
Using grep
To look for word in file and print the line number, use the -n option to grep:
grep -n 'word' file
This prints both the line number and the line on which it matches.
Using awk
This will print the number of line on which the word word appears in the file:
awk '/word/{print NR}' file
This will print both the line number and the line on which word appears:
awk '/word/{print NR, $0}' file
You can replace word with any regular expression that you like.
How it works:
/word/
This selects lines containing word.
{print NR}
For the selected lines, this prints the line number (NR means Number of the Record). You can change this to print any information that you are interested in. Thus, {print NR, $0} would print the line number followed by the line itself, $0.
Assigning the line number to a variable
Use command substitution:
n=$(awk '/word/{print NR}' file)
Using shell variables as the pattern
Suppose that the regex that we are looking for is in the shell variable url:
awk -v x="$url" '$0~x {print NR}' file
And:
n=$(awk -v x="$url" '$0~x {print NR}' file)
Sed
You can use the sed command
sed -n '/pattern/=' file
Explanation
The -n suppresses normal output so it doesn't print the actual lines. It first matches the /pattern/, and then the = operator means print the line number. Note that this will print all lines that contains the pattern.
Use the NR Variable
Given a file containing:
foo
bar
baz
use the built-in NR variable to find the line number. For example:
$ awk '/bar/ { print NR }' /tmp/foo
2
find the line number for which the first column match RRBS
awk 'i++ {if($1~/RRBS/) print i}' ../../bak/bak.db
I want to read whole file not per lines. How to change field separator to eof-symbol?
I do:
awk "^[0-9]+∆DD$1[PS].*$" $(ls -tr)
$1 - param (some integer), .* - message that I want to print. There is a problem: message can contains \n. In that way this code prints only first line of file. How can I scan whole file not per lines?
Can I do this using awk, sed, grep? Script must have length <= 60 characters (include spaces).
Assuming you mean record separator, not field separator, with GNU awk you'd do:
gawk -v RS='^$' '{ print "<" $0 ">" }' file
Replace the print with whatever you really want to do and update your question with some sample input and expected output if you want help with that part too.
The portable way to do this, by the way, is to build up the record line by line and then process it in the END section:
awk '{rec = rec (NR>1?RS:"") $0} END{ print "<" rec ">" }' file
using nf = split(rec,flds) to create fields if necessary.