I'm trying to make an awk command which stores an entire config file as variables.
The config file is in the following form (keys never have spaces, but values may):
key=value
key2=value two
And my awk command is:
$(awk -F= '{printf "declare %s=\"%s\"\n", $1, $2}' $file)
Running this without the outer subshell $(...) results in the exact commands that I want being printed, so my question is less about awk, and more about how I can run the output of awk as commands.
The command evaluates to:
declare 'key="value"'
which is somewhat of a problem, since then the double quotes are stored with the value. Even worse is when a space is introduced, which results in:
declare 'key2="value' two"
Of course, I cannot remove the quotes or the multi-word values cause problems.
I've tried most every solution I could find, such as set -f, eval, and system().
You don't need to use Awk for this but the do this with built-ins available. Read the config file properly using input redirection
#!/bin/bash
while IFS== read -r k v; do
declare "$k"="$v"
done < config_file
and source the file as
$ source script.sh
$ echo "$key"
value
$ echo "$key2"
value two
If source is not available explicitly, POSIX-ly way of doing it would be to do just
. ./script.sh
I have a file with below commands
cat /some/dir/with/files/file1_name.tsv|awk -F "\\t" '{print $21$19$23$15}'
cat /some/dir/with/files/file2_name.tsv|awk -F "\\t" '{print $2$13$3$15}'
cat /some/dir/with/files/file3_name.tsv|awk -F "\\t" '{print $22$19$3$15}'
When i loop through the file to run the command, i get below error
cat file | while read line; do $line; done
cat: invalid option -- 'F'
Try `cat --help' for more information.
You are not executing the command properly as you intended it. Since you are reading line by line on the file (for unknown reason) you could call the interpreter directly as below
#!/bin/bash
# ^^^^ for running under 'bash' shell
while IFS= read -r line
do
printf "%s" "$line" | bash
done <file
But this has an overhead of creating a forking a new process for each line of the file. If your commands present under file are harmless and is safe to be run in one shot, you can just as
bash file
and be done with it.
Also for using awk, just do as below for each of the lines to avoid useless cat
awk -F "\\t" '{print $21$19$23$15}' file1_name.tsv
You are expecting the pipe (|) symbol to act as you are accustomed to, but it doesn't. To help you understand, try this :
A="ls / | grep e" # Loads a variable with a command with pipe
$A # Does not work
eval "$A" # Works
When expanding a variable without using eval, expansion and word splitting occurs after the shell interprets redirections and pipes, so your pipe symbol is seen just as a literal character.
Some options you have :
A) Avoid piping, by passing the file name as an argument
awk -F "\\t" '{print $21$19$23$15}' /some/dir/with/files/file1_name.tsv
B) Use eval as shown below, the potential security implications of which I would suggest you to research.
C) Put arguments in file and parse it, avoiding the use of eval, something like :
# Assumes arguments separated by spaces
IFS=" " read -r -a arguments;
awk "${arguments[#]-}"
D) Implement the parsing of your data files in Bash instead of awk, and use your configuration file to specify output without the need for expanding anything (e.g. by specifying fields to print separated by spaces).
The first three approaches involve some form of interpretation of outside data as code, and that comes with risks if the file used as input cannot be guaranteed safe. Approach C might be considered a bit better in that regard, but since the command you are calling is awk, an actual program is passed to awk, so whatever awk can do, an attacker (or careless user) with write access to your file can cause your script to do anything awk can do.
To get started, here's the script I'm running to get the offending string:
# sed finds all sourced file paths from inputted file.
#
# while reads each match output from sed to $SOURCEFILE variable.
# Each should be a file path, or a variable that represents a file path.
# Any variables found should be expanded to the full path.
#
# echo and calls are used for demonstractive purposes only
# I intend to do something else with the path once it's expanded.
PATH_SOME_SCRIPT="/path/to/bash/script"
while read -r SOURCEFILE; do
echo "$SOURCEFILE"
"$SOURCEFILE"
$SOURCEFILE
done < <(cat $PATH_SOME_SCRIPT | sed -n -e "s/^\(source\|\.\|\$include\) //p")
You may also wish to use the following to test this out as mock data:
[ /path/to/bash/script ]
#!/bin/bash
source "$HOME/bash_file"
source "$GLOBAL_VAR_SCRIPT_PATH"
echo "No cow powers here"
For the tl;dr crew, basically the while loop spits out the following on the mock data:
"$HOME/bash_file"
bash: "$HOME/bash_file": no such file or directory
bash: "$HOME/bash_file": no such file or directory
"$GLOBAL_VAR_SCRIPT_PATH"
"$GLOBAL_VAR_SCRIPT_PATH": command not found
"$GLOBAL_VAR_SCRIPT_PATH": command not found
My question is, can you get the variable to expand correctly, e.g., print "/home//bash_file" and "/expanded/variable/path"? I should also state that although eval works I do not intend to use it because of its potential insecurities.
Protip that any variable value used in cat | sed would be available globally, including to the calling script, so it's not because the script cannot call the variable value.
FIRST SOLUTION ATTEMPT
Using anubhava's envsubst solution:
SOMEVARIABLE="/home/nick/.some_path"
while read -r SOURCEFILE; do
echo "$SOURCEFILE"
envsubst <<< "$SOURCEFILE";
done < <(echo -e "\"\$SOMEVARIABLE\"\n\"$HOME/.another_file\"")
This outputs the following:
"$SOMEVARIABLE"
""
"/home/nick/.another_file"
"/home/nick/.another_file"
Unfortunately, it does not expand the variable! Oh dear :(
SECOND SOLUTION ATTEMPT
Based upon the first attempt:
export SOMEVARIABLE="/home/nick/.some_path"
while read -r SOURCEFILE; do
echo "$SOURCEFILE"
envsubst <<< "$SOURCEFILE";
done < <(echo -e "\"\$SOMEVARIABLE\"\n\"$HOME/.another_file\"")
unset SOMEVARIABLE
which produces the results we wanted without eval and without messing with global variables (for too long anyway), hoorah!
Good runner-ups were further suggested using eval (although potentially unsafe) which can be found in this answer and here (link courtesy of anubhava's extended comments).
My question is, can you get the variable to expand correctly, e.g., print "/home//bash_file" and "/expanded/variable/path"?
Yes you can use envsubst program, that substitutes the values of environment variables:
while read -r sourceFile; do
envsubst <<< "$sourceFile"
done < <(sed -n "s/^\(source\|\.\|\$include\) //p" "$PATH_SOME_SCRIPT")
I think you are asking how to recursively expand variables in bash. Try
expanded=$(eval echo $SOURCEFILE)
inside your loop. eval runs the expanded command you give it. Since $SOURCEFILE isn't in quotes, it will be expanded to, e.g., $HOME/whatever. Then the eval will expand the $HOME before passing it to echo. echo will print the result, and expanded=$(...) will put the printed result in $expanded.
I can redirect the output and then cat the file and grep/awk the variable, but I would like to use this file for multiple variables.
So If it was one variable say STATUS then i could do some thing like
echo "STATUS $STATUS" >> variable.file
#later perhaps in a remote shell where varible.file was copied
NEW_VAR=`cat variable.file | awk print '{$2}'`
I guess some inline editing with sed would help. The smaller the code the better.
One common way of storing variables in a file is to just store NAME=value lines in the file, and then just source that in to the shell you want to pick up the variables.
echo 'STATUS="'"$STATUS"'"' >> variable.file
# later
. variable.file
In Bash, you can also use source instead of ., though this may not be portable to other shells. Note carefully the exact sequence of quotes necessary to get the correct double quotes printed out in the file.
If you want to put multiple variables at once into the file, you could do the following. Apologies for the quoting contortions that this takes to do properly and portably; if you restrict yourself to Bash, you can use $"" to make the quoting a little simpler:
for var in STATUS FOO BAR
do
echo "$var="'"'"$(eval echo '$'"$var")"'"'
done >> variable.file
The declare builtin is useful here
for var in STATUS FOO BAR; do
declare -p $var | cut -d ' ' -f 3- >> filename
done
As Brian says, later you can source filename
declare is great because it handles quoting for you:
$ FOO='"I'"'"'m here," she said.'
$ declare -p FOO
declare -- FOO="\"I'm here,\" she said."
$ declare -p FOO | cut -d " " -f 3-
FOO="\"I'm here,\" she said."
I'm writing a script to automate creating configuration files for Apache and PHP for my own webserver. I don't want to use any GUIs like CPanel or ISPConfig.
I have some templates of Apache and PHP configuration files. Bash script needs to read templates, make variable substitution and output parsed templates into some folder. What is the best way to do that? I can think of several ways. Which one is the best or may be there are some better ways to do that? I want to do that in pure Bash (it's easy in PHP for example)
How to replace ${} placeholders in a text file?
template.txt:
The number is ${i}
The word is ${word}
script.sh:
#!/bin/sh
#set variables
i=1
word="dog"
#read in template one line at the time, and replace variables
#(more natural (and efficient) way, thanks to Jonathan Leffler)
while read line
do
eval echo "$line"
done < "./template.txt"
BTW, how do I redirect output to external file here? Do I need to escape something if variables contain, say, quotes?
Using cat & sed for replacing each variable with its value:
Given template.txt (see above)
Command:
cat template.txt | sed -e "s/\${i}/1/" | sed -e "s/\${word}/dog/"
Seems bad to me because of the need to escape many different symbols and with many variables the line will be tooooo long.
Can you think of some other elegant and safe solution?
Try envsubst
$ cat envsubst-template.txt
Variable FOO is (${FOO}).
Variable BAR is (${BAR}).
$ FOO=myfoo
$ BAR=mybar
$ export FOO BAR
$ cat envsubst-template.txt | envsubst
Variable FOO is (myfoo).
Variable BAR is (mybar).
A heredoc is a builtin way to template a conf file.
STATUS_URI="/hows-it-goin"; MONITOR_IP="10.10.2.15";
cat >/etc/apache2/conf.d/mod_status.conf <<EOF
<Location ${STATUS_URI}>
SetHandler server-status
Order deny,allow
Deny from all
Allow from ${MONITOR_IP}
</Location>
EOF
Regarding yottsa's answer: envsubst was new to me. Fantastic.
You can use this:
perl -p -i -e 's/\$\{([^}]+)\}/defined $ENV{$1} ? $ENV{$1} : $&/eg' < template.txt
to replace all ${...} strings with corresponding enviroment variables (do not forget to export them before running this script).
For pure bash this should work (assuming that variables do not contain ${...} strings):
#!/bin/bash
while read -r line ; do
while [[ "$line" =~ (\$\{[a-zA-Z_][a-zA-Z_0-9]*\}) ]] ; do
LHS=${BASH_REMATCH[1]}
RHS="$(eval echo "\"$LHS\"")"
line=${line//$LHS/$RHS}
done
echo "$line"
done
. Solution that does not hang if RHS references some variable that references itself:
#!/bin/bash
line="$(cat; echo -n a)"
end_offset=${#line}
while [[ "${line:0:$end_offset}" =~ (.*)(\$\{([a-zA-Z_][a-zA-Z_0-9]*)\})(.*) ]] ; do
PRE="${BASH_REMATCH[1]}"
POST="${BASH_REMATCH[4]}${line:$end_offset:${#line}}"
VARNAME="${BASH_REMATCH[3]}"
eval 'VARVAL="$'$VARNAME'"'
line="$PRE$VARVAL$POST"
end_offset=${#PRE}
done
echo -n "${line:0:-1}"
WARNING: I do not know a way to correctly handle input with NULs in bash or preserve the amount of trailing newlines. Last variant is presented as it is because shells “love” binary input:
read will interpret backslashes.
read -r will not interpret backslashes, but still will drop the last line if it does not end with a newline.
"$(…)" will strip as many trailing newlines as there are present, so I end … with ; echo -n a and use echo -n "${line:0:-1}": this drops the last character (which is a) and preserves as many trailing newlines as there was in the input (including no).
I agree with using sed: it is the best tool for search/replace. Here is my approach:
$ cat template.txt
the number is ${i}
the dog's name is ${name}
$ cat replace.sed
s/${i}/5/
s/${name}/Fido/
$ sed -f replace.sed template.txt > out.txt
$ cat out.txt
the number is 5
the dog's name is Fido
I have a bash solution like mogsie but with heredoc instead of herestring to allow you to avoid escaping double quotes
eval "cat <<EOF
$(<template.txt)
EOF
" 2> /dev/null
Try eval
I think eval works really well. It handles templates with linebreaks, whitespace, and all sorts of bash stuff. If you have full control over the templates themselves of course:
$ cat template.txt
variable1 = ${variable1}
variable2 = $variable2
my-ip = \"$(curl -s ifconfig.me)\"
$ echo $variable1
AAA
$ echo $variable2
BBB
$ eval "echo \"$(<template.txt)\"" 2> /dev/null
variable1 = AAA
variable2 = BBB
my-ip = "11.22.33.44"
This method should be used with care, of course, since eval can execute arbitrary code. Running this as root is pretty much out of the question. Quotes in the template need to be escaped, otherwise they will be eaten by eval.
You can also use here documents if you prefer cat to echo
$ eval "cat <<< \"$(<template.txt)\"" 2> /dev/null
#plockc provoded a solution that avoids the bash quote escaping issue:
$ eval "cat <<EOF
$(<template.txt)
EOF
" 2> /dev/null
Edit: Removed part about running this as root using sudo...
Edit: Added comment about how quotes need to be escaped, added plockc's solution to the mix!
Edit Jan 6, 2017
I needed to keep double quotes in my configuration file so double escaping double quotes with sed helps:
render_template() {
eval "echo \"$(sed 's/\"/\\\\"/g' $1)\""
}
I can't think of keeping trailing new lines, but empty lines in between are kept.
Although it is an old topic, IMO I found out more elegant solution here: http://pempek.net/articles/2013/07/08/bash-sh-as-template-engine/
#!/bin/sh
# render a template configuration file
# expand variables + preserve formatting
render_template() {
eval "echo \"$(cat $1)\""
}
user="Gregory"
render_template /path/to/template.txt > path/to/configuration_file
All credits to Grégory Pakosz.
Instead of reinventing the wheel go with envsubst
Can be used in almost any scenario, for instance building configuration files from environment variables in docker containers.
If on mac make sure you have homebrew then link it from gettext:
brew install gettext
brew link --force gettext
./template.cfg
# We put env variables into placeholders here
this_variable_1 = ${SOME_VARIABLE_1}
this_variable_2 = ${SOME_VARIABLE_2}
./.env:
SOME_VARIABLE_1=value_1
SOME_VARIABLE_2=value_2
./configure.sh
#!/bin/bash
cat template.cfg | envsubst > whatever.cfg
Now just use it:
# make script executable
chmod +x ./configure.sh
# source your variables
. .env
# export your variables
# In practice you may not have to manually export variables
# if your solution depends on tools that utilise .env file
# automatically like pipenv etc.
export SOME_VARIABLE_1 SOME_VARIABLE_2
# Create your config file
./configure.sh
I'd have done it this way, probably less efficient, but easier to read/maintain.
TEMPLATE='/path/to/template.file'
OUTPUT='/path/to/output.file'
while read LINE; do
echo $LINE |
sed 's/VARONE/NEWVALA/g' |
sed 's/VARTWO/NEWVALB/g' |
sed 's/VARTHR/NEWVALC/g' >> $OUTPUT
done < $TEMPLATE
If you want to use Jinja2 templates, see this project: j2cli.
It supports:
Templates from JSON, INI, YAML files and input streams
Templating from environment variables
A longer but more robust version of the accepted answer:
perl -pe 's;(\\*)(\$([a-zA-Z_][a-zA-Z_0-9]*)|\$\{([a-zA-Z_][a-zA-Z_0-9]*)\})?;substr($1,0,int(length($1)/2)).($2&&length($1)%2?$2:$ENV{$3||$4});eg' template.txt
This expands all instances of $VAR or ${VAR} to their environment values (or, if they're undefined, the empty string).
It properly escapes backslashes, and accepts a backslash-escaped $ to inhibit substitution (unlike envsubst, which, it turns out, doesn't do this).
So, if your environment is:
FOO=bar
BAZ=kenny
TARGET=backslashes
NOPE=engi
and your template is:
Two ${TARGET} walk into a \\$FOO. \\\\
\\\$FOO says, "Delete C:\\Windows\\System32, it's a virus."
$BAZ replies, "\${NOPE}s."
the result would be:
Two backslashes walk into a \bar. \\
\$FOO says, "Delete C:\Windows\System32, it's a virus."
kenny replies, "${NOPE}s."
If you only want to escape backslashes before $ (you could write "C:\Windows\System32" in a template unchanged), use this slightly-modified version:
perl -pe 's;(\\*)(\$([a-zA-Z_][a-zA-Z_0-9]*)|\$\{([a-zA-Z_][a-zA-Z_0-9]*)\});substr($1,0,int(length($1)/2)).(length($1)%2?$2:$ENV{$3||$4});eg' template.txt
Here's another pure bash solution:
it's using heredoc, so:
complexity doesn't increase because of additionaly required syntax
template can include bash code
that also allows you to indent stuff properly. See below.
it doesn't use eval, so:
no problems with the rendering of trailing empty lines
no problems with quotes in the template
$ cat code
#!/bin/bash
LISTING=$( ls )
cat_template() {
echo "cat << EOT"
cat "$1"
echo EOT
}
cat_template template | LISTING="$LISTING" bash
Input:
$ cat template (with trailing newlines and double quotes)
<html>
<head>
</head>
<body>
<p>"directory listing"
<pre>
$( echo "$LISTING" | sed 's/^/ /' )
<pre>
</p>
</body>
</html>
Output:
<html>
<head>
</head>
<body>
<p>"directory listing"
<pre>
code
template
<pre>
</p>
</body>
</html>
Here is another solution: generate a bash script with all the variables and the contents of the template file, that script would look like this:
word=dog
i=1
cat << EOF
the number is ${i}
the word is ${word}
EOF
If we feed this script into bash it would produce the desired output:
the number is 1
the word is dog
Here is how to generate that script and feed that script into bash:
(
# Variables
echo word=dog
echo i=1
# add the template
echo "cat << EOF"
cat template.txt
echo EOF
) | bash
Discussion
The parentheses opens a sub shell, its purpose is to group together all the output generated
Within the sub shell, we generate all the variable declarations
Also in the sub shell, we generate the cat command with HEREDOC
Finally, we feed the sub shell output to bash and produce the desired output
If you want to redirect this output into a file, replace the last line with:
) | bash > output.txt
Taking the answer from ZyX using pure bash but with new style regex matching and indirect parameter substitution it becomes:
#!/bin/bash
regex='\$\{([a-zA-Z_][a-zA-Z_0-9]*)\}'
while read line; do
while [[ "$line" =~ $regex ]]; do
param="${BASH_REMATCH[1]}"
line=${line//${BASH_REMATCH[0]}/${!param}}
done
echo $line
done
If using Perl is an option and you're content with basing expansions on environment variables only (as opposed to all shell variables), consider Stuart P. Bentley's robust answer.
This answer aims to provide a bash-only solution that - despite use of eval - should be safe to use.
The goals are:
Support expansion of both ${name} and $name variable references.
Prevent all other expansions:
command substitutions ($(...) and legacy syntax `...`)
arithmetic substitutions ($((...)) and legacy syntax $[...]).
Allow selective suppression of variable expansion by prefixing with \ (\${name}).
Preserve special chars. in the input, notably " and \ instances.
Allow input either via arguments or via stdin.
Function expandVars():
expandVars() {
local txtToEval=$* txtToEvalEscaped
# If no arguments were passed, process stdin input.
(( $# == 0 )) && IFS= read -r -d '' txtToEval
# Disable command substitutions and arithmetic expansions to prevent execution
# of arbitrary commands.
# Note that selectively allowing $((...)) or $[...] to enable arithmetic
# expressions is NOT safe, because command substitutions could be embedded in them.
# If you fully trust or control the input, you can remove the `tr` calls below
IFS= read -r -d '' txtToEvalEscaped < <(printf %s "$txtToEval" | tr '`([' '\1\2\3')
# Pass the string to `eval`, escaping embedded double quotes first.
# `printf %s` ensures that the string is printed without interpretation
# (after processing by by bash).
# The `tr` command reconverts the previously escaped chars. back to their
# literal original.
eval printf %s "\"${txtToEvalEscaped//\"/\\\"}\"" | tr '\1\2\3' '`(['
}
Examples:
$ expandVars '\$HOME="$HOME"; `date` and $(ls)'
$HOME="/home/jdoe"; `date` and $(ls) # only $HOME was expanded
$ printf '\$SHELL=${SHELL}, but "$(( 1 \ 2 ))" will not expand' | expandVars
$SHELL=/bin/bash, but "$(( 1 \ 2 ))" will not expand # only ${SHELL} was expanded
For performance reasons, the function reads stdin input all at once into memory, but it's easy to adapt the function to a line-by-line approach.
Also supports non-basic variable expansions such as ${HOME:0:10}, as long as they contain no embedded command or arithmetic substitutions, such as ${HOME:0:$(echo 10)}
Such embedded substitutions actually BREAK the function (because all $( and ` instances are blindly escaped).
Similarly, malformed variable references such as ${HOME (missing closing }) BREAK the function.
Due to bash's handling of double-quoted strings, backslashes are handled as follows:
\$name prevents expansion.
A single \ not followed by $ is preserved as is.
If you want to represent multiple adjacent \ instances, you must double them; e.g.:
\\ -> \ - the same as just \
\\\\ -> \\
The input mustn't contain the following (rarely used) characters, which are used for internal purposes: 0x1, 0x2, 0x3.
There's a largely hypothetical concern that if bash should introduce new expansion syntax, this function might not prevent such expansions - see below for a solution that doesn't use eval.
If you're looking for a more restrictive solution that only supports ${name} expansions - i.e., with mandatory curly braces, ignoring $name references - see this answer of mine.
Here is an improved version of the bash-only, eval-free solution from the accepted answer:
The improvements are:
Support for expansion of both ${name} and $name variable references.
Support for \-escaping variable references that shouldn't be expanded.
Unlike the eval-based solution above,
non-basic expansions are ignored
malformed variable references are ignored (they don't break the script)
IFS= read -d '' -r lines # read all input from stdin at once
end_offset=${#lines}
while [[ "${lines:0:end_offset}" =~ (.*)\$(\{([a-zA-Z_][a-zA-Z_0-9]*)\}|([a-zA-Z_][a-zA-Z_0-9]*))(.*) ]] ; do
pre=${BASH_REMATCH[1]} # everything before the var. reference
post=${BASH_REMATCH[5]}${lines:end_offset} # everything after
# extract the var. name; it's in the 3rd capture group, if the name is enclosed in {...}, and the 4th otherwise
[[ -n ${BASH_REMATCH[3]} ]] && varName=${BASH_REMATCH[3]} || varName=${BASH_REMATCH[4]}
# Is the var ref. escaped, i.e., prefixed with an odd number of backslashes?
if [[ $pre =~ \\+$ ]] && (( ${#BASH_REMATCH} % 2 )); then
: # no change to $lines, leave escaped var. ref. untouched
else # replace the variable reference with the variable's value using indirect expansion
lines=${pre}${!varName}${post}
fi
end_offset=${#pre}
done
printf %s "$lines"
To follow up on plockc's answer on this page, here is a dash-suitable version, for those of you looking to avoid bashisms.
eval "cat <<EOF >outputfile
$( cat template.in )
EOF
" 2> /dev/null
Try shtpl
Perfect case for shtpl. (project of mine, so it is not widely in use and lacks in documentation. But here is the solution it offers anyhow. May you want to test it.)
Just execute:
$ i=1 word=dog sh -c "$( shtpl template.txt )"
Result is:
the number is 1
the word is dog
Have fun.
This page describes an answer with awk
awk '{while(match($0,"[$]{[^}]*}")) {var=substr($0,RSTART+2,RLENGTH -3);gsub("[$]{"var"}",ENVIRON[var])}}1' < input.txt > output.txt
# Usage: template your_file.conf.template > your_file.conf
template() {
local IFS line
while IFS=$'\n\r' read -r line ; do
line=${line//\\/\\\\} # escape backslashes
line=${line//\"/\\\"} # escape "
line=${line//\`/\\\`} # escape `
line=${line//\$/\\\$} # escape $
line=${line//\\\${/\${} # de-escape ${ - allows variable substitution: ${var} ${var:-default_value} etc
# to allow arithmetic expansion or command substitution uncomment one of following lines:
# line=${line//\\\$\(/\$\(} # de-escape $( and $(( - allows $(( 1 + 2 )) or $( command ) - UNSECURE
# line=${line//\\\$\(\(/\$\(\(} # de-escape $(( - allows $(( 1 + 2 ))
eval "echo \"${line}\"";
done < "$1"
}
This is the pure bash function adjustable to your liking, used in production and should not break on any input.
If it breaks - let me know.
You can also use bashible (which internally uses the evaluating approach described above/below).
There is an example, how to generate a HTML from multiple parts:
https://github.com/mig1984/bashible/tree/master/examples/templates
Look at simple variables substitution python script here: https://github.com/jeckep/vsubst
It is very simple to use:
python subst.py --props secure.properties --src_path ./templates --dst_path ./dist
Here's a bash function that preserves whitespace:
# Render a file in bash, i.e. expand environment variables. Preserves whitespace.
function render_file () {
while IFS='' read line; do
eval echo \""${line}"\"
done < "${1}"
}
Here's a modified perl script based on a few of the other answers:
perl -pe 's/([^\\]|^)\$\{([a-zA-Z_][a-zA-Z_0-9]*)\}/$1.$ENV{$2}/eg' -i template
Features (based on my needs, but should be easy to modify):
Skips escaped parameter expansions (e.g. \${VAR}).
Supports parameter expansions of the form ${VAR}, but not $VAR.
Replaces ${VAR} with a blank string if there is no VAR envar.
Only supports a-z, A-Z, 0-9 and underscore characters in the name (excluding digits in the first position).
You can also use printf to fill a template.
#!/bin/bash
IFS='' read -rd '' TEMPL <<-'EOB'
The number is %d
The word is "%s"
Birds of Massachusetts:
%s
EOB
N=12
WORD="Bird"
MULTILINE="Eastern Bluebirds
Common Grackles"
echo "START"
printf "${TEMPL}" ${N} ${WORD} "${MULTILINE}"
echo "END"
Here's the output, with quotes and whitespace intact:
START
The number is 12
The word is "Bird"
Birds of Massachusetts:
Eastern Bluebirds
Common Grackles
END