I have setup the connection manager from SSIS to Oracle as:
In the Oracle source:
I can preview the data successfully:
However, upon attempting to execute the packge, the erorr appears as:
SSIS package "C:\Users\kakah\Documents\Visual Studio 2015\Projects\TestExcel\TestExcel\INV_MTL_SYSTEM_ITEMS_TL.dtsx" starting.
Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Warning: 0x802092A7 at Data Flow Task, OLE DB Destination [17]: Truncation may occur due to inserting data from data flow column "DESCRIPTION" with a length of 600 to database column "DESCRIPTION" with a length of 150.
Warning: 0x802092A7 at Data Flow Task, OLE DB Destination [17]: Truncation may occur due to inserting data from data flow column "LONG_DESCRIPTION" with a length of 2000 to database column "LONG_DESCRIPTION" with a length of 150.
Error: 0x2C0 at INV_MTL_SYSTEM_ITEMS_TL: OCI error encountered. ORA-12154: TNS:could not resolve the connect identifier specified
Error: 0x20F at Data Flow Task, Oracle Source [62]: The AcquireConnection method call to the connection manager Oracle Connector failed with error code 0x80004005. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task, SSIS.Pipeline: Oracle Source failed validation and returned error code 0x80004005.
Error: 0xC004700C at Data Flow Task, SSIS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
SSIS package "C:\Users\kakah\Documents\Visual Studio 2015\Projects\TestExcel\TestExcel\INV_MTL_SYSTEM_ITEMS_TL.dtsx" finished: Failure.
What could I be missing? How can this be resolved?
If you right click on the project and go to properties --> Configuration Properties --> Debugging, did you make sure Run64BitRuntime is False? Sometimes that gets toggles to True and will break it.
What exactly do you mean by executing the package? Execute it from BIDS/SSDT or SQL Server agent?
Are there any configuration files/dynamic configurations that you are using? From what it appears, the tnsnames.ora file that your connection manager is using at run time has bad connection information.
SSDT 2017 connecting to Oracle 9i.
Issue : on my windows 10 laptop I had installed 10G 32 Bit and 11G 64 bit client installed
Resolution : Remove all the clients and install only one version of Client 11G both 32 and 64 bit client and SSIS worked like a charm
Related
I need to poll an Oracle database in BizTalk. In the postPollStatement I need to add the package that has been created for me in the Oracle DB. Can anyone assist me with this?
I have created the schema in Visual Studio, the port is created and I have configured everything except the postPollStatement.
EDIT1:
I have done some research and followed Microsoft Docs but still not managed to get the postPollStatement working.
https://learn.microsoft.com/en-us/biztalk/adapters-and-accelerators/adapter-oracle-database/poll-oracle-db-using-stored-procedures-functions-or-packaged-procedures
This is the error I receive: System.TypeInitializationException: The type initializer for 'Oracle.DataAccess.Client.OracleConnection' threw an exception. ---> System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
To get this working you need to do the following:
polledDataAvailableStatement: SQL Statement that returns '1' or '0'.
SELECT COUNT (*) FROM TABLE
pollingAction: Retrieve the polling action from the schema generated for the inbound message.
pollingStatement: For this binding property, specify the entire XML request message that you generate from the schema in Visual Studio.
(No parameter needed if not specified in schema).
I've been trying to create an SSIS project to read from an Oracle 11.x database to an SQL Server database.
When I set this up in Visual Studio 10 Shell, I do not receive any logs . It gives me a successful message but nothing happens.
I tried to connect to an Oracle 12c database and the same happened.
I tried to get data from an Oracle 11.x project and dump it into an excel file. I also tried to get data from an Oracle 11.x table and dump it into a new Oracle 11.x table (in the same database) and in both cases I got the following error:
> TITLE: Microsoft Visual Studio
Failed to start project
------------------------------ ADDITIONAL INFORMATION:
Exception deserializing the package "The package failed to load due to
error 0xC0011008 "Error loading from XML. No further detailed error
information can be specified for this problem because no Events object
was passed where detailed error information can be stored.". This
occurs when CPackage::LoadFromXML fails. ".
(Microsoft.DataTransformationServices.VsIntegration)
The package failed to load due to error 0xC0011008 "Error loading from
XML. No further detailed error information can be specified for this
problem because no Events object was passed where detailed error
information can be stored.". This occurs when CPackage::LoadFromXML
fails. (Package)
------------------------------ BUTTONS:
OK
Can anyone help me please?
Thank you
You haven't posted how you are trying to get data from oracle exactly so can say much about the error. I can only give my solution in 2008 r2:
create an oracle linked server in your sql server and then use an open query in the SSIS package to pull anything you need
I am getting the below mentioned error in one of the task in SSIS package.
Exception from HRESULT: 0xC0202040
Error at Populate data combined data [OLE DB Destination [81]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80040E21 Description: "Multiple-step
OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error at Task_Name [OLE DB Destination [81]]: Failed to open a fastload rowset for Table_Name.Check that the object exists in the database.
I have Microsoft visual studio 2010 shell, server management studio 2012 installed in my machine and also I have installed ODTwithODAC121012 and attunitySSISOraAdapters for the DB connectivity.
enter image description here
I tested the connection to the oracle DB and it is success.
Please let me know if there is something wrong with the connection setups.
Thanks in Advance!!
I am new to SSIS, I have developed a simple solution that takes data from a FLAT FILE SOURCE, does some data conversions and Inserts this data into a database table using OLEDB Destination Task.
My problem is it works fine on my test database, When I change the database connection, it gets stuck forever in the the Control Flow task and never gets into data flow task(The Data Flow Task continues to remain yellow instead of turning Green).
After around 30 minutes, it goes forward and gives me an error at OLEDB destination block saying "Out Of Memory" as shown below.
[OLE DB Destination [589]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8007000E.
An OLE DB record is available. Source: "Microsoft Cursor Engine" Hresult: 0x8007000E Description: "Out of memory.".
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Destination" (589) failed with error code 0xC0202009 while processing input "OLE DB Destination Input" (602). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Please Help me with this.
During creating of DB-based MDS-connection in JDeveloper list of partitions is empty.
I have tried to install Oracle SOA Suite 11g on both Oracle and SQL Server and have this issue in JDeveloper with different jdbc-drivers.
Of course, MDS schemas in database are created using Oracle Repository Creation utility and both sys/sa and DEV_MDS users were tried.
I have looked into JDeveloper Messages tab and see such error:
WARNING: Error reading db partitions for connection name Connection1. Reason : MDS-00003: error connecting to the database
Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Error during pool creation in Universal Connection Pool Manager MBean: oracle.ucp.UniversalConnectionPoolException: Error during pool creation in Universal Connection Pool Manager: java.sql.SQLException: Invalid Universal Connection Pool configuration: java.sql.SQLException: Unable to create factory class instance with provided factory class name: java.lang.ClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerXADataSource
Error during pool creation in Universal Connection Pool Manager MBean: oracle.ucp.UniversalConnectionPoolException: Error during pool creation in Universal Connection Pool Manager: java.sql.SQLException: Invalid Universal Connection Pool configuration: java.sql.SQLException: Unable to create factory class instance with provided factory class name: java.lang.ClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerXADataSource
It is strange, because it is class from sqljdbc4.jar which I have specified as JDBC-driver (Microsoft SQL Server JDBC Driver 3.0).
So I tried jTDS SQL Server driver and received such error:
Apr 26, 2011 9:52:01 PM oracle.tip.tools.ide.common.resourcepalette.adapter.mds.DBConnectionInfo
WARNING: Error reading db partitions for connection name Connection2. Reason :
This answer is coming a "bit" late, but hopefully it will be of some use to the next coder who stumbles upon this.
I'm currently banging my head to the wall trying to get a simple SOA/BPM/ADF application built and deployed using MS SQL Server as the backend DB containing the MDS data.
I was able to create a DB connection to the SQL Server instance with JDeveloper, but I ran into the same problem as Denys when I tried to create a new MDS Connection: The list of partitions was empty and after several hours (or days) I discovered the same error message in the Messages tab:
java.lang.ClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerXADataSource
even though the actual DB connection was working properly.
Also, whenever I tried to build my application using JDeveloper's build command or Maven or Ant tasks, I received the same error.
All of the errors pointed in the direction of a missing JDBC driver, which was actually not missing.
I was finally able to at least partially solve the issue, although I had to use very dirty hacks.
Solution to create MDS connection in JDeveloper:
To get this to work I had to make the MDS module realize that there actually exists a JDBC driver for SQL server, so I added the driver's jar into the module's classpath in ${jdev.home}/extensions/oracle.mds.dt.jar#META-INF/extension.xml:
<classpath>c:/dev/jdbc/mssql/sqljdbc4.jar</classpath>
In my opinion, it should have been enough to just have the driver in the project's library settings, but somehow that just wouldn't cut it.
Solution to get the ant scac task working:
I got the build a bit forward by doing essentially the same thing. I added the JDBC driver's jar into scac's classpath by modifying ${jdev.home}/bin/ant-sca-compile.xml:
<path id="scac.tasks.class.path">
<!-- Added this line -->
<pathelement path="c:/dev/jdbc/mssql/sqljdbc4.jar"/>
</path>
All in all, these are not the kind of solutions I was hoping for, but maybe someone else will benefit from them.
Now I'm at the point where my composite.xml validation fails because of missing and/or broken wsdl files:
[scac] Validating composite "C:\install\fod\CompositeServices\OrderBookingComposite\bin/..//composite.xml"
[scac] error: location {/ns:composite/ns:import[#location='oramds:/apps/FusionOrderDemoShared/services/orderbooking/OrderBookingProcessor.wsdl']}(15,125): Load of wsdl "oramds:/apps/FusionOrderDemoShared/services/orderbooking/OrderBookingProcessor.wsdl" failed
[scac] error: location {/ns:composite/ns:import[#location='oramds:/apps/FusionOrderDemoShared/services/partnersupplier/PartnerSupplierComposite.wsdl']}(25,30): Load of wsdl "oramds:/apps/FusionOrderDemoShared/services/partnersupplier/PartnerSupplierComposite.wsdl" failed
[scac] error: location {/ns:composite/ns:import[#location='oramds:/apps/FusionOrderDemoShared/services/oracle/fodemo/storefront/store/service/common/serviceinterface/StoreFrontService.wsdl']}(29,30): Load of wsdl "oramds:/apps/FusionOrderDemoShared/services/oracle/fodemo/storefront/store/service/common/serviceinterface/StoreFrontService.wsdl" failed
... continues with errors for everything else
This error occurs when trying to execute the compile-build-all task in Oracle's Fusion Order Demo application. Any advice regarding this is most welcome.