I need to parse the line written bold below:
line="eth1 Link encap:Ethernet HWaddr 11:11:11:11:11:11"
This line may have more words unexpectedly such as
line="eth1 Link encap:Ethernet Extra HWaddr 11:11:11:11:11:11"
So, for parsing the MAC address correctly, I need to parse the line accordingly with a bash command.
echo $line | cut -d' ' -f5* works for the first line, while *echo $line | cut -d' ' -f6* works for the second. So, I need to parse only the last column of the line.
However, because of the device restriction, I can only use grep and cut command. Not sed, awk, rev,reverse, etc.
With grep:
echo $line | grep -o -E '[^ ]+$'
With cut, a solution can be made with an extra computation based on the word count, assuming the delimiter is a space:
nw=$(echo $line | wc -w)
echo $line | cut -d ' ' -f$nw-
If the MAC address is the last sequence of characters after a space, you can remove the longest match of "* " (asterisk and a space) pattern using pure Bash:
echo "${line##* }"
You can also extract the last 17 characters from the string:
echo "${line: -17}"
If you want a strict match at the end of the line (due to .*):
echo $(expr match "$line" '.*\(\([a-zA-Z0-9]\{2\}\:\)\{5\}[a-zA-Z0-9]\{2\}\)')
Using GNU grep:
grep -o -P '(?:[a-zA-Z0-9]{2}:){5}[a-zA-Z0-9]{2}' <<< "$line"
In the latter case, you may want to add the $ anchor for the end of the line. Of course, you don't have to use here string. You may want to use a pipe instead: echo "$line" | grep -o -P ....
Related
How can I remove all text after a character, in this case a colon (":"), in bash? Can I remove the colon, too? I have no idea how to.
In Bash (and ksh, zsh, dash, etc.), you can use parameter expansion with % which will remove characters from the end of the string or # which will remove characters from the beginning of the string. If you use a single one of those characters, the smallest matching string will be removed. If you double the character, the longest will be removed.
$ a='hello:world'
$ b=${a%:*}
$ echo "$b"
hello
$ a='hello:world:of:tomorrow'
$ echo "${a%:*}"
hello:world:of
$ echo "${a%%:*}"
hello
$ echo "${a#*:}"
world:of:tomorrow
$ echo "${a##*:}"
tomorrow
An example might have been useful, but if I understood you correctly, this would work:
echo "Hello: world" | cut -f1 -d":"
This will convert Hello: world into Hello.
$ echo 'hello:world:again' |sed 's/:.*//'
hello
I know some solutions:
# Our mock data:
A=user:mail:password
With awk and pipe:
$ echo $A | awk -v FS=':' '{print $1}'
user
Via bash variables:
$ echo ${A%%:*}
user
With pipe and sed:
$ echo $A | sed 's#:.*##g'
user
With pipe and grep:
$ echo $A | egrep -o '^[^:]+'
user
With pipe and cut:
$ echo $A | cut -f1 -d\:
user
egrep -o '^[^:]*:'
trim off everything after the last instance of ":"
grep -o '^.*:' fileListingPathsAndFiles.txt
and if you wanted to drop that last ":"
grep -o '^.*:' file.txt | sed 's/:$//'
#kp123: you'd want to replace : with / (where the sed colon should be \/)
Let's say you have a path with a file in this format:
/dirA/dirB/dirC/filename.file
Now you only want the path which includes four "/". Type
$ echo "/dirA/dirB/dirC/filename.file" | cut -f1-4 -d"/"
and your output will be
/dirA/dirB/dirC
The advantage of using cut is that you can also cut out the uppest directory as well as the file (in this example), so if you type
$ echo "/dirA/dirB/dirC/filename.file" | cut -f1-3 -d"/"
your output would be
/dirA/dirB
Though you can do the same from the other side of the string, it would not make that much sense in this case as typing
$ echo "/dirA/dirB/dirC/filename.file" | cut -f2-4 -d"/"
results in
dirA/dirB/dirC
In some other cases the last case might also be helpful. Mind that there is no "/" at the beginning of the last output.
How can I remove all text after a character, in this case a colon (":"), in bash? Can I remove the colon, too? I have no idea how to.
In Bash (and ksh, zsh, dash, etc.), you can use parameter expansion with % which will remove characters from the end of the string or # which will remove characters from the beginning of the string. If you use a single one of those characters, the smallest matching string will be removed. If you double the character, the longest will be removed.
$ a='hello:world'
$ b=${a%:*}
$ echo "$b"
hello
$ a='hello:world:of:tomorrow'
$ echo "${a%:*}"
hello:world:of
$ echo "${a%%:*}"
hello
$ echo "${a#*:}"
world:of:tomorrow
$ echo "${a##*:}"
tomorrow
An example might have been useful, but if I understood you correctly, this would work:
echo "Hello: world" | cut -f1 -d":"
This will convert Hello: world into Hello.
$ echo 'hello:world:again' |sed 's/:.*//'
hello
I know some solutions:
# Our mock data:
A=user:mail:password
With awk and pipe:
$ echo $A | awk -v FS=':' '{print $1}'
user
Via bash variables:
$ echo ${A%%:*}
user
With pipe and sed:
$ echo $A | sed 's#:.*##g'
user
With pipe and grep:
$ echo $A | egrep -o '^[^:]+'
user
With pipe and cut:
$ echo $A | cut -f1 -d\:
user
egrep -o '^[^:]*:'
trim off everything after the last instance of ":"
grep -o '^.*:' fileListingPathsAndFiles.txt
and if you wanted to drop that last ":"
grep -o '^.*:' file.txt | sed 's/:$//'
#kp123: you'd want to replace : with / (where the sed colon should be \/)
Let's say you have a path with a file in this format:
/dirA/dirB/dirC/filename.file
Now you only want the path which includes four "/". Type
$ echo "/dirA/dirB/dirC/filename.file" | cut -f1-4 -d"/"
and your output will be
/dirA/dirB/dirC
The advantage of using cut is that you can also cut out the uppest directory as well as the file (in this example), so if you type
$ echo "/dirA/dirB/dirC/filename.file" | cut -f1-3 -d"/"
your output would be
/dirA/dirB
Though you can do the same from the other side of the string, it would not make that much sense in this case as typing
$ echo "/dirA/dirB/dirC/filename.file" | cut -f2-4 -d"/"
results in
dirA/dirB/dirC
In some other cases the last case might also be helpful. Mind that there is no "/" at the beginning of the last output.
Using the Terminal on Mac, I need to find and display only the MAC addresses with a line break following each address.
ifconfig | grep 'ether ' | cut -b 7-24
returns
38:c9:86:3c:ed:16
28:f0:76:3c:c2:e4
1a:00:01:87:0d:30
1a:00:01:87:0d:31
3a:c9:86:c3:c8:00
0a:f0:76:3c:c2:e4
5e:05:5b:91:c5:99
What command can I use that will put a line break after each address?
Normally, I would use sed to replace a character, but I've never been able to find a way for sed to insert newline characters.
To get the output you want, you would have to insert 2 newlines at the end of each line:
for i in $(ifconfig |grep 'ether' |awk '{print $2}'); do printf
"$i\n\n"; done
Output:
38:c9:86:3c:ed:16
28:f0:76:3c:c2:e4
1a:00:01:87:0d:30
1a:00:01:87:0d:31
3a:c9:86:c3:c8:00
0a:f0:76:3c:c2:e4
5e:05:5b:91:c5:99
I'm having a bit of an issue cutting the output up from egrep. I have output like:
From: First Last
From: First Last
From: First Last
I want to cut out the "From: " (essentially leaving the "First Last").
I tried
cut -d ":" -f 7
but the output is just a bunch of blank lines.
I would appreciate any help.
Here's the full code that I am trying to use if it helps:
egrep '^From:' $file | cut -d ":" -f 7
NOTE: I've already tested the egrep portion of the code and it works as expected.
The cut command lines in your question specify colon-separated fields and that you want the output to consist only of field 7; since there is no 7th field in your input, the result you're getting isn't what you intend.
Since the "From:" prefix appears to be identical across all lines, you can simply cut from the 7th character onward:
egrep '^From:' $file | cut -c7-
and get the result you intend.
you were really close.
I think you only need to replace ":" with " " as separator and add "-" after the "7": like this:
cut -d " " -f 2-
I tested and works pretty well.
The -f argument is for what fields. Since there is only one : in the line, there's only two fields. So changing -f 7 to -f 2- will give you want you want. Albeit with a leading space.
You can combine the egrep and cut parts into one command with sed:
sed -n 's/^From: //gp' $file
sed -n turns off printing by default, and then I am using p in the sed command explicitly to print the lines I want.
You can use sed:
sed 's/^From: *//'
OR awk:
awk -F ': *' '$1=="From"{print $2}'
OR grep -oP
grep -oP '^From: *\K.*'
Here is a Bash one-liner:
grep ^From file.txt | while read -a cols; do echo ${cols[#]:1}; done
See: Handling positional parameters at wiki.bash-hackers.org
cut itself is a very handy tool in bash
cut -d (delimiter character) -f (fields that you want as output)
a single field is given directly as -f 3 ,
range of fields can be selected as -f 5-9
so in your this particular case code would be
egrep '^From:' $file | cut -d\ -f 2-3
the delimiter is space here and can be escaped using a \
-f 1 corresponds to " From " and 2-3 corresponds to " First Last "
I have a configuration file that contains lines like "hallo;welt;" and i want to do a grep on this file.
Whenever i try something like grep "$1;$2" my.config or echo "$1;$2 of even line="$1;$2" my script fails with something like:
: command not found95: line 155: =hallo...
How can i tell bash to ignore ; while evaluating "..." blocks?
EDIT: an example of my code.
# find entry
$line=$(grep "$1;$2;" $PERMISSIONSFILE)
# splitt line
reads=$(echo $line | cut -d';' -f3)
writes=$(echo $line | cut -d';' -f4)
admins=$(echo $line | cut -d';' -f5)
# do some stuff on the permissions
# replace old line with new line
nline="$1;$2;$reads;$writes;$admins"
sed -i "s/$line/$nline/g" $TEMPPERM
my script should be called like this: sh script "table" "a.b.*.>"
EDIT: another, simpler example
$test=$(grep "$1;$2;" temp.authorization.config)
the temp file:
table;pattern;read;write;stuff
the call sh test.sh table pattern results in: : command not foundtable;pattern;read;write;stuff
Don't use $ on the left side of an assignment in bash -- if you do it'll substitute the current value of the variable rather than assigning to it. That is, use:
test=$(grep "$1;$2;" temp.authorization.config)
instead of:
$test=$(grep "$1;$2;" temp.authorization.config)
Edit: also, variable expansions should be in double-quotes unless there's a good reason otherwise. For example, use:
reads=$(echo "$line" | cut -d';' -f3)
instead of:
reads=$(echo $line | cut -d';' -f3)
This doesn't matter for semicolons, but does matter for spaces, wildcards, and a few other things.
A ; inside quotes has no meaning at all for bash. However, if $1 contains a doublequote itself, then you'll end up with
grep "something";$2"
which'll be parsed by bash as two separate commands:
grep "something" ; other"
^---command 1----^ ^----command 2---^
Show please show exactly what your script is doing around the spot the error is occurring, and what data you're feeding into it.
Counter-example:
$ cat file.txt
hello;welt;
hello;world;
hell;welt;
$ cat xx.sh
grep "$1;$2" file.txt
$ bash -x xx.sh hello welt
+ grep 'hello;welt' file.txt
hello;welt;
$
You have not yet classified your problem accurately.
If you try to assign the result of grep to a variable (like I do) your example breaks.
Please show what you mean. Using the same data file as before and doing an assignment, this is the output I get:
$ cat xx.sh
grep "$1;$2" file.txt
output=$(grep "$1;$2" file.txt)
echo "$output"
$ bash -x xx.sh hello welt
+ grep 'hello;welt' file.txt
hello;welt;
++ grep 'hello;welt' file.txt
+ output='hello;welt;'
+ echo 'hello;welt;'
hello;welt;
$
Seems to work for me. It also demonstrates why the question needs an explicit, complete, executable, minimal example so that we can see what the questioner is doing that is different from what people answering the question think is happening.
I see you've provided some sample code:
# find entry
$line=$(grep "$1;$2;" $PERMISSIONSFILE)
# splitt line
reads=$(echo $line | cut -d';' -f3)
writes=$(echo $line | cut -d';' -f4)
admins=$(echo $line | cut -d';' -f5)
The line $line=$(grep ...) is wrong. You should omit the $ before line. Although it is syntactically correct, it means 'assign to the variable whose name is stored in $line the result of the grep command'. That is unlikely to be what you had in mind. It is, occasionally, useful. However, those occasions are few and far between, and only for people who know what they're doing and who can document accurately what they're doing.
For safety if nothing else, I would also enclose the $line values in double quotes in the echo lines. It may not strictly be necessary, but it is simple protective programming.
The changes lead to:
# find entry
line=$(grep "$1;$2;" $PERMISSIONSFILE)
# split line
reads=$( echo "$line" | cut -d';' -f3)
writes=$(echo "$line" | cut -d';' -f4)
admins=$(echo "$line" | cut -d';' -f5)
The rest of your script was fine.
It seems like you are trying to read a semicolon-delimited file, identify a line starting with 'table;pattern;' where table is a string you specify and pettern is a regular expression grep will understand. Once the line is identified you wish to replaced the 3rd, 4th and 5th fields with different data and write the updated line back to the file.
Does this sound correct?
If so, try this code
#!/bin/bash
in_table="$1"
in_pattern="$2"
file="$3"
while IFS=';' read -r -d$'\n' tuple pattern reads writes admins ; do
line=$(cut -d: -f1<<<"$tuple")
table=$(cut -d: -f2<<<"$tuple")
# do some stuff with the variables
# e.g., update the values
reads=1
writes=2
admins=12345
# replace the old line with the new line
sed -i'' -n $line'{i\
'"$table;$pattern;$reads;$writes;$admins"'
;d;}' "$file"
done < <(grep -n '^'"${in_table}"';'"${in_pattern}"';' "${file}")
I chose to update by line number here to avoid problems of unknown characters in the left hand of the substitution.