I have this code that can trigger in production the "Non local exit detected!" branch. I can't understand how that can happen, since even a return will trigger a NonLocalExit exception. Even a throw will trigger an exception.
Is there any way to have exception_raised and yield_returned both false?
def transaction
yield_returned = exception_raised = nil
begin
if block_given?
result = yield
yield_returned = true
puts 'yield returned!'
result
end
rescue Exception => exc
exception_raised = exc
ensure
if block_given?
unless yield_returned or exception_raised
puts 'Non local exit detected!'
end
end
end
end
transaction do
puts 'good block!'
end
transaction do
puts 'starting transaction with block with return'
return
puts 'this will not show'
end
Output:
good block!
yield returned!
starting transaction with block with return
I want to somehow output 'Non local exit detected!'. I know this happens in production, but I can't make it happen in development. Tried it with a return and with a throw, but they both raise an exception. Any other way?
The problem was with my reproduction, and returning from the top-most level in Ruby. You can return from a method, where there's a stack, but if you return from Kernel, you'll get a LocalJumpError.
Assuming the previous method transaction(). In matters in what context you call return:
def lol
transaction do
puts 'Block in method: starting transaction with block with return'
return
puts 'this will not show'
end
end
lol()
transaction do
puts 'block in Kernel: starting transaction with block with return'
return
puts 'this will not show'
end
Output:
$ ruby local_jump_error.rb
# Running from method:
Block in method: starting transaction with block with return
yield_returned=nil, exception_raised=nil
Non local exit detected!
# Running without method:
block in Kernel: starting transaction with block with return
yield_returned=nil, exception_raised=#<LocalJumpError: unexpected return>
local_jump_error.rb:45: unexpected return (LocalJumpError)
from local_jump_error.rb:6:in `transaction'
from local_jump_error.rb:43
I don't know your level with Ruby, but to exit from a block you must use break instead of return. In this case, break also accepts a value in the same way that return does, meaning that a break will conceptually assign the variable result with the value from break.
In case of a throw, it will raise an exception, so it will always unwind the call stack until if finds a rescue statement, thus it will run the code exception_raised = exc.
You can fine tune the rescue to use LocalJumpError instead of Exception to only catch blocks that have return in them. All other exception types will then not stop at that rescue.
I wonder if you meant to write:
if block_given?
if yield_returned.nil? && exception_raised
puts 'Non local exit detected!'
end
end
If you make this change, the code will produce the 'Non local exit detected!', for the second method call of #transaction with the return.
When you wrote unless yield_returned or expection_raised, the if clause would get evaluated only when both the variables would have been false. And as I understand that is not possible.
And as a side note, as was suggested in the other answer, one should not rescue Exception, LocalJumpError should be enough.
I'd like to use the yield_control matcher in RSpec like so
expect {|b| some_method(&b) }.to yield_control.exactly(5).times
However, I'd like the block to raise an error. Is there an RSpec construct that allows you to do this?
Basically, I'm looking for something like an RSpec mock object that allows you to raise an error whenever the block is yielded to and count the number of times it was yielded to.
I understand there are other ways of doing it by defining my own block that keeps track of how many times it has been called, but I was hoping there is a built-in that does something like this.
Example:
def some_method(&block)
attempt = 0
begin
attempt += 1
yield
rescue => e
retry if attempt < 3
end
end
I'd like to test that control is yielded a certain number of times when the block raises an error. I understand that this is one way to do it:
number_of_times = 0
some_method do
number_of_times += 1
raise StandardError
end
expect(number_of_times).to eq(3)
But I was hoping I could use the expect {..}.to yield_control syntax.
Are you expecting the block to raise an error? There is an Rspec matcher for that: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers/raise-error-matcher
I'm writing a script which collects data from various url's. I want to collect errors from begin rescue blocks into an array to output them when the program runs in verbose mode. With normal use, a failed connection is ignored and the script moves on to the next url.
I thought the best way to do this would be to create an array errArray = Array.new at the top of the script to hold errors, and then do:
rescue Exception => e
errArray << e.message
in various functions to log errors. The die function outputs the array using p unless it is empty. However, I get the error
Undefined local variable or method 'errArray'
Any help (and constructive criticism) appreciated.
EDIT: die function:
def die(e)
p errorArray unless errorArray.empty?
# Some other irrelevant code
end
errArray is not global variable and therefore methods have no access to it. You can declare it as a global variable by $err_array.
However the best solution would be create a simple class:
class ExceptionCollector
def collect
yield
rescue => e
errors << e.message
end
def errors
#errors ||= []
end
end
And then simple:
$logger = ExceptionCollector.new
$logger.collect do
# this may raise an exception
end
def foo
$logger.collect do
# another exception
end
end
$logger.errors #=> list of errors
How do I add information to an exception message without changing its class in ruby?
The approach I'm currently using is
strings.each_with_index do |string, i|
begin
do_risky_operation(string)
rescue
raise $!.class, "Problem with string number #{i}: #{$!}"
end
end
Ideally, I would also like to preserve the backtrace.
Is there a better way?
To reraise the exception and modify the message, while preserving the exception class and its backtrace, simply do:
strings.each_with_index do |string, i|
begin
do_risky_operation(string)
rescue Exception => e
raise $!, "Problem with string number #{i}: #{$!}", $!.backtrace
end
end
Which will yield:
# RuntimeError: Problem with string number 0: Original error message here
# backtrace...
It's not much better, but you can just reraise the exception with a new message:
raise $!, "Problem with string number #{i}: #{$!}"
You can also get a modified exception object yourself with the exception method:
new_exception = $!.exception "Problem with string number #{i}: #{$!}"
raise new_exception
I realize I'm 6 years late to this party, but...I thought I understood Ruby error handling until this week and ran across this question. While the answers are useful, there is non-obvious (and undocumented) behavior that may be useful to future readers of this thread. All code was run under ruby v2.3.1.
#Andrew Grimm asks
How do I add information to an exception message without changing its class in ruby?
and then provides sample code:
raise $!.class, "Problem with string number #{i}: #{$!}"
I think it is critical to point out that this does NOT add information to the original error instance object, but instead raises a NEW error object with the same class.
#BoosterStage says
To reraise the exception and modify the message...
but again, the provided code
raise $!, "Problem with string number #{i}: #{$!}", $!.backtrace
will raise a new instance of whatever error class is referenced by $!, but it will not be the exact same instance as $!.
The difference between #Andrew Grimm's code and #BoosterStage's example is the fact that the first argument to #raise in the first case is a Class, whereas in the second case it is an instance of some (presumably) StandardError. The difference matters because the documentation for Kernel#raise says:
With a single String argument, raises a RuntimeError with the string as a message. Otherwise, the first parameter should be the name of an Exception class (or an object that returns an Exception object when sent an exception message).
If only one argument is given and it is an error object instance, that object will be raised IF that object's #exception method inherits or implements the default behavior defined in Exception#exception(string):
With no argument, or if the argument is the same as the receiver, return the receiver. Otherwise, create a new exception object of the same class as the receiver, but with a message equal to string.to_str.
As many would guess:
catch StandardError => e
raise $!
raises the same error referenced by $!, the same as simply calling:
catch StandardError => e
raise
but probably not for the reasons one might think. In this case, the call to raise is NOT just raising the object in $!...it raises the result of $!.exception(nil), which in this case happens to be $!.
To clarify this behavior, consider this toy code:
class TestError < StandardError
def initialize(message=nil)
puts 'initialize'
super
end
def exception(message=nil)
puts 'exception'
return self if message.nil? || message == self
super
end
end
Running it (this is the same as #Andrew Grimm's sample which I quoted above):
2.3.1 :071 > begin ; raise TestError, 'message' ; rescue => e ; puts e ; end
results in:
initialize
message
So a TestError was initialized, rescued, and had its message printed. So far so good. A second test (analogous to #BoosterStage's sample quoted above):
2.3.1 :073 > begin ; raise TestError.new('foo'), 'bar' ; rescue => e ; puts e ; end
The somewhat surprising results:
initialize
exception
bar
So a TestError was initialized with 'foo', but then #raise has called #exception on the first argument (an instance of TestError) and passed in the message of 'bar' to create a second instance of TestError, which is what ultimately gets raised.
TIL.
Also, like #Sim, I am very concerned about preserving any original backtrace context, but instead of implementing a custom error handler like his raise_with_new_message, Ruby's Exception#cause has my back: whenever I want to catch an error, wrap it in a domain-specific error and then raise that error, I still have the original backtrace available via #cause on the domain-specific error being raised.
The point of all this is that--like #Andrew Grimm--I want to raise errors with more context; specifically, I want to only raise domain-specific errors from certain points in my app that can have many network-related failure modes. Then my error reporting can be made to handle the domain errors at the top level of my app and I have all the context I need for logging/reporting by calling #cause recursively until I get to the "root cause".
I use something like this:
class BaseDomainError < StandardError
attr_reader :extra
def initialize(message = nil, extra = nil)
super(message)
#extra = extra
end
end
class ServerDomainError < BaseDomainError; end
Then if I am using something like Faraday to make calls to a remote REST service, I can wrap all possible errors into a domain-specific error and pass in extra info (which I believe is the original question of this thread):
class ServiceX
def initialize(foo)
#foo = foo
end
def get_data(args)
begin
# This method is not defined and calling it will raise an error
make_network_call_to_service_x(args)
rescue StandardError => e
raise ServerDomainError.new('error calling service x', binding)
end
end
end
Yeah, that's right: I literally just realized I can set the extra info to the current binding to grab all local vars defined at the time the ServerDomainError is instantiated/raised. This test code:
begin
ServiceX.new(:bar).get_data(a: 1, b: 2)
rescue
puts $!.extra.receiver
puts $!.extra.local_variables.join(', ')
puts $!.extra.local_variable_get(:args)
puts $!.extra.local_variable_get(:e)
puts eval('self.instance_variables', $!.extra)
puts eval('self.instance_variable_get(:#foo)', $!.extra)
end
will output:
#<ServiceX:0x00007f9b10c9ef48>
args, e
{:a=>1, :b=>2}
undefined method `make_network_call_to_service_x' for #<ServiceX:0x00007f9b10c9ef48 #foo=:bar>
#foo
bar
Now a Rails controller calling ServiceX doesn't particularly need to know that ServiceX is using Faraday (or gRPC, or anything else), it just makes the call and handles BaseDomainError. Again: for logging purposes, a single handler at the top level can recursively log all the #causes of any caught errors, and for any BaseDomainError instances in the error chain it can also log the extra values, potentially including the local variables pulled from the encapsulated binding(s).
I hope this tour has been as useful for others as it was for me. I learned a lot.
UPDATE: Skiptrace looks like it adds the bindings to Ruby errors.
Also, see this other post for info about how the implementation of Exception#exception will clone the object (copying instance variables).
Here's another way:
class Exception
def with_extra_message extra
exception "#{message} - #{extra}"
end
end
begin
1/0
rescue => e
raise e.with_extra_message "you fool"
end
# raises an exception "ZeroDivisionError: divided by 0 - you fool" with original backtrace
(revised to use the exception method internally, thanks #Chuck)
My approach would be to extend the rescued error with an anonymous module that extends the error's message method:
def make_extended_message(msg)
Module.new do
##msg = msg
def message
super + ##msg
end
end
end
begin
begin
raise "this is a test"
rescue
raise($!.extend(make_extended_message(" that has been extended")))
end
rescue
puts $! # just says "this is a test"
puts $!.message # says extended message
end
That way, you don't clobber any other information in the exception (i.e. its backtrace).
I put my vote that Ryan Heneise's answer should be the accepted one.
This is a common problem in complex applications and preserving the original backtrace is often critical so much so that we have a utility method in our ErrorHandling helper module for this.
One of the problems we discovered was that sometimes trying to generate more meaningful messages when a system is in a messed up state would result in exceptions being generated inside the exception handler itself which led us to harden our utility function as follows:
def raise_with_new_message(*args)
ex = args.first.kind_of?(Exception) ? args.shift : $!
msg = begin
sprintf args.shift, *args
rescue Exception => e
"internal error modifying exception message for #{ex}: #{e}"
end
raise ex, msg, ex.backtrace
end
When things go well
begin
1/0
rescue => e
raise_with_new_message "error dividing %d by %d: %s", 1, 0, e
end
you get a nicely modified message
ZeroDivisionError: error dividing 1 by 0: divided by 0
from (irb):19:in `/'
from (irb):19
from /Users/sim/.rvm/rubies/ruby-2.0.0-p247/bin/irb:16:in `<main>'
When things go badly
begin
1/0
rescue => e
# Oops, not passing enough arguments here...
raise_with_new_message "error dividing %d by %d: %s", e
end
you still don't lose track of the big picture
ZeroDivisionError: internal error modifying exception message for divided by 0: can't convert ZeroDivisionError into Integer
from (irb):25:in `/'
from (irb):25
from /Users/sim/.rvm/rubies/ruby-2.0.0-p247/bin/irb:16:in `<main>'
Here's what I ended up doing:
Exception.class_eval do
def prepend_message(message)
mod = Module.new do
define_method :to_s do
message + super()
end
end
self.extend mod
end
def append_message(message)
mod = Module.new do
define_method :to_s do
super() + message
end
end
self.extend mod
end
end
Examples:
strings = %w[a b c]
strings.each_with_index do |string, i|
begin
do_risky_operation(string)
rescue
raise $!.prepend_message "Problem with string number #{i}:"
end
end
=> NoMethodError: Problem with string number 0:undefined method `do_risky_operation' for main:Object
and:
pry(main)> exception = 0/0 rescue $!
=> #<ZeroDivisionError: divided by 0>
pry(main)> exception = exception.append_message('. With additional info!')
=> #<ZeroDivisionError: divided by 0. With additional info!>
pry(main)> exception.message
=> "divided by 0. With additional info!"
pry(main)> exception.to_s
=> "divided by 0. With additional info!"
pry(main)> exception.inspect
=> "#<ZeroDivisionError: divided by 0. With additional info!>"
This is similar to Mark Rushakoff's answer but:
Overrides to_s instead of message since by default message is defined as simply to_s (at least in Ruby 2.0 and 2.2 where I tested it)
Calls extend for you instead of making the caller do that extra step.
Uses define_method and a closure so that the local variable message can be referenced. When I tried using a class variable ##message, it warned, "warning: class variable access from toplevel" (See this question: "Since you're not creating a class with the class keyword, your class variable is being set on Object, not [your anonymous module]")
Features:
Easy to use
Reuses the same object (instead of creating a new instance of the class), so things like object identity, class, and backtrace are preserved
to_s, message, and inspect all respond appropriately
Can be used with an exception that is already stored in a variable; doesn't require you to re-raise anything (like the solution that involved passing the backtrace to raise: raise $!, …, $!.backtrace). This was important to me since the exception was passed in to my logging method, not something I had rescued myself.
Most of these answers are incredibly convoluted. Maybe they were necessary in Ruby 1.8 or whatever, but in modern versions* this is totally straightforward and intuitive. Just rescue => e, append to e.message, and raise.
begin
raise 'oops'
rescue => e
e.message << 'y daisy'
raise
end
Traceback (most recent call last):
4: from /Users/david/.rvm/rubies/ruby-2.7.2/bin/irb:23:in `<main>'
3: from /Users/david/.rvm/rubies/ruby-2.7.2/bin/irb:23:in `load'
2: from /Users/david/.rvm/rubies/ruby-2.7.2/lib/ruby/gems/2.7.0/gems/irb-1.2.6/exe/irb:11:in `<top (required)>'
1: from (irb):2
RuntimeError (oopsy daisy)
* I've only tested with 2.7.2 and 3.1.2, but I assume everything in between is covered, and probably some earlier versions of 2.x as well.
Another approach would be to add context (extra information) about the exception as a hash instead of as a string.
Check out this pull request where I proposed adding a few new methods to make it really easy to add extra context information to exceptions, like this:
begin
…
User.find_each do |user|
reraise_with_context(user: user) do
send_reminder_email(user)
end
end
…
rescue
# $!.context[:user], etc. is available here
report_error $!, $!.context
end
or even:
User.find_each.reraise_with_context do |user|
send_reminder_email(user)
end
The nice thing about this approach is that it lets you add extra information in a very concise way. And it doesn't even require you to define new exception classes inside which to wrap the original exceptions.
As much as I like #Lemon Cat's answer for many reasons, and it's certainly appropriate for some cases, I feel like if what you are actually trying to do is attach additional information about the original exception, it seems preferable to just attach it directly to that exception it pertains to rather than inventing a new wrapper exception (and adding another layer of indirection).
Another example:
class ServiceX
def get_data(args)
reraise_with_context(StandardError, binding: binding, service: self.class, callee: __callee__) do
# This method is not defined and calling it will raise an error
make_network_call_to_service_x(args)
end
end
end
The downside of this approach is that you have to update your error handling to actually use the information that may be available in exception.context. But you would have to do that anyway in order to recursively call cause to get to the root excetion.
It's possible to use :cause key to prevent message duplication
The cause of the generated exception (accessible via Exception#cause) is automatically set to the "current" exception ($!), if any. An alternative value, either an Exception object or nil, can be specified via the :cause argument.
begin
do_risky_operation
rescue => e
raise e.class, "#{e.message} (some extra message)", e.backtrace, cause: nil
end
short:
Is there a way in Ruby to DRY-ify this:
def entry_point_one
begin
do_something
rescue MySyntaxErrorOne, MySyntaxErrorTwo, MySyntaxErrorEtc => syn_err
raise syn_err.exception(syn_err.message)
end
end
def entry_point_two
begin
do_something_else
rescue MySyntaxErrorOne, MySyntaxErrorTwo, MySyntaxErrorEtc => syn_err
raise syn_err.exception(syn_err.message)
end
end
longer:
I'm building an interpreter. This interpreter can be called using different entry points. If I feed this interpreter a 'dirty' string, I expect it to raise an error. However, it would be nice if I don't get spammed by the by the entire back trace of every method called directly or indirectly by do_something, especially since the interpreter makes use of recursion.
As you can see in the above snippet, I already know a way to re raise an error and thereby removing the back trace. What I would like do is remove the duplication in the above example. The closest I have come thus far is this:
def entry_point_one
re_raise_known_exceptions {do_something}
end
def entry_point_two
re_raise_known_exceptions {do_something_else}
end
def re_raise_known_exceptions
yield
rescue MySyntaxErrorOne, MySyntaxErrorTwo, MySyntaxErrorEtc => syn_err
raise syn_err.exception(syn_err.message)
end
But that makes the method re-raise-known-exceptions show up in the back trace.
edit: I guess what I want would be something like a C pre-processing macro
You can just use the splat on an array.
Straight from IRB:
COMMON_ERRORS = [ArgumentError, RuntimeError] # add your own
def f
yield
rescue *COMMON_ERRORS => err
puts "Got an error of type #{err.class}"
end
f{ raise ArgumentError.new }
Got an error of type ArgumentError
f{ raise 'abc' }
Got an error of type RuntimeError
while thinking about it a bit more, I came up with this:
interpreter_block {do_something}
def interpreter_block
yield
rescue ExceptionOne, ExceptionTwo, ExceptionEtc => exc
raise exc.exception(exc.message)
end
Although it's still not quiet what I would like to have, at least now the extra entry in the back trace has become somewhat better looking.
It might be slightly evil, but I think you can simply remove the line from the backtrace ;-)
COMMON_ERRORS = [ArgumentError, RuntimeError]
def interpreter_block
yield
rescue *COMMON_ERRORS => err
err.backtrace.delete_if{ |line| line=~/interpreter_block/ }
raise err
end
I'm not sure it's such a good idea though. You'll have a hell of a lot of fun debugging your interpreter afterward ;-)
Side note: Treetop may be of interest to you.
This is a touch hackish, but as far as cleaning up the backtrace goes, something like this works nicely:
class Interpreter
def method1
error_catcher{ puts 1 / 0 }
end
def error_catcher
yield
rescue => err
err.set_backtrace(err.backtrace - err.backtrace[1..2])
raise err
end
end
The main trick is this line err.set_backtrace(err.backtrace - err.backtrace[1..2]). Without it, we get the following (from IRB):
ZeroDivisionError: divided by 0
from (irb):43:in `/'
from (irb):43:in `block in method1'
from (irb):47:in `error_catcher'
from (irb):43:in `method1'
from (irb):54
from /Users/peterwagenet/.ruby_versions/ruby-1.9.1-p129/bin/irb:12:in `<main>'
What we don't want in there are the second and third lines. So we remove them, ending up with:
ZeroDivisionError: divided by 0
from (irb):73:in `/'
from (irb):73:in `method1'
from (irb):84
from /Users/peterwagenet/.ruby_versions/ruby-1.9.1-p129/bin/irb:12:in `<main>'
If you have all of the information you need in the exceptions, and you do not need the backtrace at all, you can just define your own error and raise that, instead of reraising the existing exception. This will give it a fresh backtrace. (Of course, presumably your sample code is incomplete and there is other processing happening in the rescue block -- otherwise your best bet is to just let the error bubble up naturally.)
class MyError < StandardError; end
def interpreter_block
yield
rescue ExceptionOne, ExceptionTwo, ExceptionEtc => exc
raise MyError
end