I have a batch file that downloads 21 separate files (all very large). I have timeouts to try to allow some files to finish before trying to get more (not a nice solution), and if they all run together it uses all my system resources and everything grinds to a halt.
I can put /WAIT in my FOR loop, then it will only launch one download task at a time. I would like to launch 5 download windows, and once they are finished, continue with the next 5. I've tried to use GOTO to wait until finished but it does not work.
rem *****Step 1*****
set tstart=0
set tend=5
set incr=1
FOR /L %%a IN (%tstart%,%incr%,%tend%) DO (start /ABOVENORMAL GET_PIECE_ENSEMBLE.bat %newformatdate% 0%%a %HH%)
timeout /t 30
:WAIT
if exist flagfile.* goto WAIT
Then I have 4 more steps to download files 5-10, 11-16, etc. But if it takes extra long to download, the script moves along and starts downloading more files or moves on to the next processes, which require all the data to be downloaded first. I am trying 2 things here: a short timeout to ensure the data has started downloading (so a flagfile exists), and a wait if flagfile exists. But the wait isn't working, the script still moves along and starts downloading the next bunch. My workaround has been to set a timeout of 600 but sometimes the data takes more than 10 min to download, sometimes it hangs and takes up to two hours, sometimes only a few minutes. If all the pieces launch at once, it freezes up the workstation and we have to restart the machine.
And here is the code of GET_PIECE_ENSEMBLE, the script that runs in the FOR loop:
set "newformatdate=%1"
set "ename=%2"
set "HH=%3"
echo %time% > flagfile.%ename%
wget -O C:/Data/DataFile_%HH%.%ename%.grb2 http://url/%newformatdate%.grib2
del flagfile.%ename%
Looking for advice on either how to make the "wait if flagfile exists" work (any idea why this isn't working?), or if there is some simple argument I can put in my FOR loop to limit the number of instances so downloads finish before others start? Surely there is a better solution than guessing at a timeout interval when the network conditions vary so much!
In GET_PIECE_ENSEMBLE
try
...
set "HH=%3"
:only5
set /a running=0
for /f %%c in ('dir /b/a-d flagfile.* 2^>nul') do set /a running+=1
if %running% geq 5 (
timeout /t 1 >nul
goto only5
)
echo %time% > flagfile.%ename%
...
which should count the flagfiles and while there are 5 or more, delay 1 sec.
As soon as one flagfile is deleted, the next queued file to get activated will bump the number of in-process files to 5 again, blocking the other queued processes.
UNTESTED!!!
:: Start with list of files to download as parameters
:: down.cmd "file1" "file2" "file3" etc..
#echo off
set "url=http://host.com"
:loop
for /f %%a in ('tasklist /FI "imagename eq wget.exe" /FI "windowtitle eq _download*" /FO csv /NH ^| find /C "wget"') do (
if %%a LEQ 5 (
start "_download" "%path%\wget.exe" -O "%~1" "%url%/%~1"
shift
)
timeout /T 5
if not "%~1"=="" goto loop
I want to make a batch file that takes a user input in minutes, and will shutdown the computer after the time is up.
I know how to shutdown the computer after a set amount of time is up, I've just been having trouble setting that time to the user input.
I think this will do what you want.
#echo off
set /p mins=Enter number of minutes to wait until shutdown:
set /a mins=%mins%*60
shutdown /s /t:%mins%
According to http://ss64.com/nt/shutdown.html the most you can wait is 10 minutes, so if you need to wait longer you would need to add some sort of artificial timer, most likely using something like TIMEOUT if your system supports it (mine doesn't) or ping.
#echo off
set /p mins=Enter number of minutes to wait until shutdown:
for /L %%a in (0,1,%mins%) do (
PING -n 60 127.0.0.1>nul
)
shutdown /s
Check out this thread.
https://superuser.com/questions/215531/windows-7-shut-down-pc-after-specified-amount-of-time
Put this code in it after the #echo off line:
shutdown -s -t 1800
#echo off
title Shutdown Input
set /p mins=Enter number of minutes to wait until shutdown:
set /a mins=%mins%*60
shutdown.exe -s -t %mins%
Create a file with bat as extension (such as delayed.bat).
You can use the Editor under Accessoires for that.
Write the following lines into the file and save it (The file has to end with .bat) :
#echo off
set /p time=minutes:
set /a time=%time%*60
shutdown /a
shutdown /s /f /t %time%
set /p lets the user input something
set /a interprets expressions (calculations)
/a aborts earlier shutdown (counter)
/s stands for shutdown
/f stands for force programs to close (optional).
/t stands for the time in seconds. (for example: 60s * 10 = 10 min)
Doubleclick the file and enter after how many minutes you computer shuts down.
To abort shutdown: enter a big number (such as 10000000).
Create a batch file, and put this code in it after the #echo off line:
shutdown -s -t 1800
The computer will shutdown 30 minutes (1800 seconds) after running the batch file.
To cancel a shutdown initiated by that batch file, you can go to Start → Run and type:
shutdown -a
Or put that in its own separate batch file, then run it to cancel a shutdown.
Referred From Here
Put this in a batch file and run.
#echo off
#setlocal
color 1E
echo ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ
echo Ý ÚÄÄÄ¿Þ
echo Ý SHUTDOWN COMPUTER WITH TIMER ³ û ³Þ
echo Ý ÀÄÄÄÙÞ
echo. ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß
echo.
echo.
echo ----------------------------------------
Set /P _abort=abort shutdown? (y, *):
echo ----------------------------------------
If /i "%_abort%"=="y" shutdown /a
If /i "%_abort%"=="y" goto step1
Set /P _timer=shutdown computer after minutes:
echo ------------------------
set /a _result= _timer * 60
shutdown /s /t %_result%
:step1
echo Job Done!
pause
If you're on Windows 10, use this simple script:
shutdown -s -t 100
Note: Set the "100" to whatever you want etc. 40
This question already has answers here:
Sleeping in a batch file
(34 answers)
Closed 9 years ago.
How do I get a Windows batch script to wait a few seconds?
sleep and wait don't seem to work (unrecognized command).
You can try
ping -n XXX 127.0.0.1 >nul
where XXX is the number of seconds to wait, plus one.
I don't know why those commands are not working for you, but you can also try timeout
timeout <delay in seconds>
timeout /t 10 /nobreak > NUL
/t specifies the time to wait in seconds
/nobreak won't interrupt the timeout if you press a key (except CTRL-C)
> NUL will suppress the output of the command
To wait 10 seconds:
choice /T 10 /C X /D X /N
Microsoft has a sleep function you can call directly.
Usage: sleep time-to-sleep-in-seconds
sleep [-m] time-to-sleep-in-milliseconds
sleep [-c] commited-memory ratio (1%-100%)
You can just say sleep 1 for example to sleep for 1 second in your batch script.
IMO Ping is a bit of a hack for this use case.
For a pure cmd.exe script, you can use this piece of code that returns the current time in hundreths of seconds.
:gettime
set hh=%time:~0,2%
set mm=%time:~3,2%
set ss=%time:~6,2%
set cc=%time:~-2%
set /A %1=hh*360000+mm*6000+ss*100+cc
goto :eof
You may then use it in a wait loop like this.
:wait
call :gettime wait0
:w2
call :gettime wait1
set /A waitt = wait1-wait0
if !waitt! lss %1 goto :w2
goto :eof
And putting all pieces together:
#echo off
setlocal enableextensions enabledelayedexpansion
call :gettime t1
echo %t1%
call :wait %1
call :gettime t2
echo %t2%
set /A tt = (t2-t1)/100
echo %tt%
goto :eof
:wait
call :gettime wait0
:w2
call :gettime wait1
set /A waitt = wait1-wait0
if !waitt! lss %1 goto :w2
goto :eof
:gettime
set hh=%time:~0,2%
set mm=%time:~3,2%
set ss=%time:~6,2%
set cc=%time:~-2%
set /A %1=hh*360000+mm*6000+ss*100+cc
goto :eof
For a more detailed description of the commands used here, check HELP SET and HELP CALL information.
Heh, Windows is uhm... interesting. This works:
choice /T 1 /d y > NUL
choice presents a prompt asking you yes or no. /d y makes it choose yes. /t 1 makes it wait a second before typing it. > NUL squashes output.
The Windows 2003 Resource Kit has a sleep batch file. If you ever move up to PowerShell, you can use:
Start-Sleep -s <time to sleep>
Or something like that.
I rely on JScript. I have a JScript file like this:
// This is sleep.js
WScript.Sleep( WScript.Arguments( 0 ) );
And inside a batch file I run it with CScript (usually it is %SystemRoot%\system32\cscript.exe)
rem This is the calling inside a BAT file to wait for 5 seconds
cscript /nologo sleep.js 5000
I just wrote my own sleep which called the Win32 Sleep API function.
RJLsoftware has a small utility called DelayExec.exe. With this you can execute a delayed start of any program in batches and Windows registry (most useful in ...Windows/.../Run registry).
Usage example:
delayexec "C:\WINDOWS\system32\notepad.exe" 10
or as a sleep command:
delayexec "nothing" 10
Personally I use a Perl one-liner:
perl -e "sleep 10;"
for a 10-second wait. Chances are you'll already have Perl installed on a development machine as part of your git installation; if not you will have to install it, for example, from ActiveState or Strawberry, but it's one of those things I install anyway.
Alternatively, you can install a sleep command from GnuWin32.
Is there a built-in way to measure execution time of a command on the Windows command line?
PowerShell has a cmdlet for this called Measure-Command. You'll have to ensure that PowerShell is available on the machine that runs it.
PS> Measure-Command { echo hi }
Days : 0
Hours : 0
Minutes : 0
Seconds : 0
Milliseconds : 0
Ticks : 1318
TotalDays : 1.52546296296296E-09
TotalHours : 3.66111111111111E-08
TotalMinutes : 2.19666666666667E-06
TotalSeconds : 0.0001318
TotalMilliseconds : 0.1318
Measure-Command captures the command's output. You can redirect the output back to your console using Out-Default:
PS> Measure-Command { echo hi | Out-Default }
hi
Days : 0
...
As Makotoe commented, Measure-Command returns a TimeSpan object, so the measured time is printed as a bunch of fields. You can format the object into a timestamp string using ToString():
PS> (Measure-Command { echo hi | Out-Default }).ToString()
hi
00:00:00.0001318
If the command inside Measure-Command changes your console text color, use [Console]::ResetColor() to reset it back to normal.
If you want
To measure execution time down to the hundredth of a second in (hh:mm:ss.ff format)
To not have to download and install a resource pack
To look like a huge DOS nerd (who doesn't)
Try copying the following script into a new batch file (e.g. timecmd.bat):
#echo off
#setlocal
set start=%time%
:: Runs your command
cmd /c %*
set end=%time%
set options="tokens=1-4 delims=:.,"
for /f %options% %%a in ("%start%") do set start_h=%%a&set /a start_m=100%%b %% 100&set /a start_s=100%%c %% 100&set /a start_ms=100%%d %% 100
for /f %options% %%a in ("%end%") do set end_h=%%a&set /a end_m=100%%b %% 100&set /a end_s=100%%c %% 100&set /a end_ms=100%%d %% 100
set /a hours=%end_h%-%start_h%
set /a mins=%end_m%-%start_m%
set /a secs=%end_s%-%start_s%
set /a ms=%end_ms%-%start_ms%
if %ms% lss 0 set /a secs = %secs% - 1 & set /a ms = 100%ms%
if %secs% lss 0 set /a mins = %mins% - 1 & set /a secs = 60%secs%
if %mins% lss 0 set /a hours = %hours% - 1 & set /a mins = 60%mins%
if %hours% lss 0 set /a hours = 24%hours%
if 1%ms% lss 100 set ms=0%ms%
:: Mission accomplished
set /a totalsecs = %hours%*3600 + %mins%*60 + %secs%
echo command took %hours%:%mins%:%secs%.%ms% (%totalsecs%.%ms%s total)
Usage
If you put timecmd.bat in a directory in your path, you can call it from anywhere like this:
timecmd [your command]
E.g.
C:\>timecmd pause
Press any key to continue . . .
command took 0:0:1.18
If you want to do output redirection, you can quote the command like this:
timecmd "dir c:\windows /s > nul"
This should handle commands that run from before- to after-midnight, but the output will be wrong if your command runs for 24 hours or more.
Hehe, the most simple solution might be this:
echo %time%
YourApp.exe
echo %time%
This works on every Windows out of the box.
In case of an application using console output, it might be convenient to store the starting time in a temporary variable:
set startTime=%time%
YourApp.exe
echo Start Time: %startTime%
echo Finish Time: %time%
Just a little expansion of the answer from Casey.K about using the Measure-Command from PowerShell:
You can invoke PowerShell from the standard command prompt, like this:
powershell -Command "Measure-Command {echo hi}"
This will eat the standard output, but you can prevent that by adding | Out-Default like this from PowerShell:
Measure-Command {echo hi | Out-Default}
Or from a command prompt:
powershell -Command "Measure-Command {echo hi | Out-Default}"
Of course, you're free to wrap this in a script file *.ps1 or *.bat.
If you are using Windows 2003 (note that windows server 2008 and later are not supported) you can use The Windows Server 2003 Resource Kit, which contains timeit.exe that displays detailed execution stats. Here is an example, timing the command "timeit -?":
C:\>timeit timeit -?
Invalid switch -?
Usage: TIMEIT [-f filename] [-a] [-c] [-i] [-d] [-s] [-t] [-k keyname | -r keyname] [-m mask] [commandline...]
where: -f specifies the name of the database file where TIMEIT
keeps a history of previous timings. Default is .\timeit.dat
-k specifies the keyname to use for this timing run
-r specifies the keyname to remove from the database. If
keyname is followed by a comma and a number then it will
remove the slowest (positive number) or fastest (negative)
times for that keyname.
-a specifies that timeit should display average of all timings
for the specified key.
-i specifies to ignore non-zero return codes from program
-d specifies to show detail for average
-s specifies to suppress system wide counters
-t specifies to tabular output
-c specifies to force a resort of the data base
-m specifies the processor affinity mask
Version Number: Windows NT 5.2 (Build 3790)
Exit Time: 7:38 am, Wednesday, April 15 2009
Elapsed Time: 0:00:00.000
Process Time: 0:00:00.015
System Calls: 731
Context Switches: 299
Page Faults: 515
Bytes Read: 0
Bytes Written: 0
Bytes Other: 298
You can get TimeIt in the Windows 2003 Resource Kit. It's not available for direct download from the Microsoft Download Center, but one can still get it from the archive.org - Windows Server 2003 Resource Kit Tools.
The one-liner I use in Windows Server 2008 R2 is:
cmd /v:on /c "echo !TIME! & *mycommand* & echo !TIME!"
So long as mycommand doesn't require quotes (which screws with cmd's quote processing). The /v:on is to allow for the two different TIME values to be evaluated independently rather than once at the execution of the command.
If you have a command window open and call the commands manually, you can display a timestamp on each prompt, e.g.
prompt $d $t $_$P$G
It gives you something like:
23.03.2009 15:45:50,77
C:\>
If you have a small batch script that executes your commands, have an empty line before each command, e.g.
(empty line)
myCommand.exe
(next empty line)
myCommand2.exe
You can calculate the execution time for each command by the time information in the prompt. The best would probably be to pipe the output to a textfile for further analysis:
MyBatchFile.bat > output.txt
Since others are recommending installing things like freeware and PowerShell, you could also install Cygwin, which would give you access to many basic Unix commands like time:
abe#abe-PC:~$ time sleep 5
real 0m5.012s
user 0m0.000s
sys 0m0.000s
Not sure how much overhead Cygwin adds.
Not quite as elegant as some of the functionality on Unix, but create a cmd file which looks like:
#echo off
time < nul
yourexecutable.exe > c:\temp\output.txt
time < nul
rem on newer windows system you can try time /T
That will display the start and stop times like so:
The current time is: 10:31:57.92
Enter the new time:
The current time is: 10:32:05.94
Enter the new time:
I use freeware called "GS Timer".
Just make a batch file like this:
timer
yourapp.exe
timer /s
If you need a set of times, just pipe the output of timer /s into a .txt file.
You can get it here: Gammadyne's Free DOS Utilities
The resolution is 0.1 seconds.
I'm using Windows XP and for some reason timeit.exe does not work for me. I found another alternative - PTIME. This works very well.
http://www.pc-tools.net/win32/ptime/
Example -
C:\> ptime
ptime 1.0 for Win32, Freeware - http://www.pc-tools.net/
Copyright(C) 2002, Jem Berkes <jberkes#pc-tools.net>
Syntax: ptime command [arguments ...]
ptime will run the specified command and measure the execution time
(run time) in seconds, accurate to 5 millisecond or better. It is an
automatic process timer, or program timer.
C:\> ptime cd
ptime 1.0 for Win32, Freeware - http://www.pc-tools.net/
Copyright(C) 2002, Jem Berkes <jberkes#pc-tools.net>
=== cd ===
C:\
Execution time: 0.015 s
As long as it doesn't last longer than 24hours...
#echo off
set starttime=%TIME%
set startcsec=%STARTTIME:~9,2%
set startsecs=%STARTTIME:~6,2%
set startmins=%STARTTIME:~3,2%
set starthour=%STARTTIME:~0,2%
set /a starttime=(%starthour%*60*60*100)+(%startmins%*60*100)+(%startsecs%*100)+(%startcsec%)
:TimeThis
ping localhost
set endtime=%time%
set endcsec=%endTIME:~9,2%
set endsecs=%endTIME:~6,2%
set endmins=%endTIME:~3,2%
set endhour=%endTIME:~0,2%
if %endhour% LSS %starthour% set /a endhour+=24
set /a endtime=(%endhour%*60*60*100)+(%endmins%*60*100)+(%endsecs%*100)+(%endcsec%)
set /a timetaken= ( %endtime% - %starttime% )
set /a timetakens= %timetaken% / 100
set timetaken=%timetakens%.%timetaken:~-2%
echo.
echo Took: %timetaken% sec.
There's also TimeMem (March 2012):
This is a Windows utility which executes a program and displays its
execution time, memory usage, and IO statistics. It is similar in
functionality to the Unix time utility.
Here is a
Postfix timer version:
Usage example:
timeout 1 | TimeIt.cmd
Execution took ~969 milliseconds.
Copy & paste this into some editor like for example Notepad++ and save it as TimeIt.cmd:
:: --- TimeIt.cmd ----
#echo off
setlocal enabledelayedexpansion
call :ShowHelp
:: Set pipeline initialization time
set t1=%time%
:: Wait for stdin
more
:: Set time at which stdin was ready
set t2=!time!
:: Calculate difference
Call :GetMSeconds Tms1 t1
Call :GetMSeconds Tms2 t2
set /a deltaMSecs=%Tms2%-%Tms1%
echo Execution took ~ %deltaMSecs% milliseconds.
endlocal
goto :eof
:GetMSeconds
Call :Parse TimeAsArgs %2
Call :CalcMSeconds %1 %TimeAsArgs%
goto :eof
:CalcMSeconds
set /a %1= (%2 * 3600*1000) + (%3 * 60*1000) + (%4 * 1000) + (%5)
goto :eof
:Parse
:: Mask time like " 0:23:29,12"
set %1=!%2: 0=0!
:: Replace time separators with " "
set %1=!%1::= !
set %1=!%1:.= !
set %1=!%1:,= !
:: Delete leading zero - so it'll not parsed as octal later
set %1=!%1: 0= !
goto :eof
:ShowHelp
echo %~n0 V1.0 [Dez 2015]
echo.
echo Usage: ^<Command^> ^| %~nx0
echo.
echo Wait for pipe getting ready... :)
echo (Press Ctrl+Z ^<Enter^> to Cancel)
goto :eof
^ - Based on 'Daniel Sparks' Version
Depending on the version of Windows you're using, just running bash will put you into Bash mode. This will allow you to use a bunch of commands that are not available on PowerShell directly (like the time command). Timing your command is now as easy as executing:
# The clause <your-command> (without the angle brackets) denotes the command you want to run.
$ time <your-command>
Note: You can easily quit from Bash mode and return back into your mainstream shell by running exit while in Bash mode.
This worked for me perfectly (Windows 10) after trying out other methods (like Measure-Command) which sometimes produce undesired stats. Hope this works for you as well.
An alternative to measure-time is simply "Get-Date". You don't have that hassle with forwarding output and so on.
$start = Get-Date
[System.Threading.Thread]::Sleep(1500)
$(Get-Date) - $start
Output:
Days : 0
Hours : 0
Minutes : 0
Seconds : 1
Milliseconds : 506
Ticks : 15060003
TotalDays : 1.74305590277778E-05
TotalHours : 0.000418333416666667
TotalMinutes : 0.025100005
TotalSeconds : 1.5060003
TotalMilliseconds : 1506.0003
This is a one-liner which avoids delayed expansion, which could disturb certain commands:
cmd /E /C "prompt $T$$ & echo.%TIME%$ & COMMAND_TO_MEASURE & for %Z in (.) do rem/ "
The output is something like:
14:30:27.58$
...
14:32:43.17$ rem/
For long-term tests replace $T by $D, $T and %TIME% by %DATE%, %TIME% to include the date.
To use this inside of a batch file, replace %Z by %%Z.
Update
Here is an improved one-liner (without delayed expansion too):
cmd /E /C "prompt $D, $T$$ & (for %# in (.) do rem/ ) & COMMAND_TO_MEASURE & for %# in (.) do prompt"
The output looks similar to this:
2015/09/01, 14:30:27.58$ rem/
...
2015/09/01, 14:32:43.17$ prompt
This approach does not include the process of instancing a new cmd in the result, nor does it include the prompt command(s).
In case anyone else has come here looking for an answer to this question, there's a Windows API function called GetProcessTimes(). It doesn't look like too much work to write a little C program that would start the command, make this call, and return the process times.
In the directory where your program is, type notepad mytimer.bat, click 'yes' to create a new file.
Paste the code below, replacing YourApp.exe with your program, then save.
#echo off
date /t
time /t
YourApp.exe
date /t
time /t
Type mytimer.bat in the command line then press Enter.
Here is my method, no conversion and no ms. It is useful to determine encoding durations (limited to 24 hours though):
#echo off
:start
REM Start time storage
set ST=%time%
echo Process started at %ST%
echo.
echo.
REM Your commands
REM Your commands
REM Your commands
:end
REM Start Time Definition
for /f "tokens=1-3 delims=:" %%a in ("%ST%") do set /a h1=%%a & set /a m1=%%b & set /a s1=%%c
REM End Time Definition
for /f "tokens=1-3 delims=:" %%a in ("%TIME%") do set /a h2=%%a & set /a m2=%%b & set /a s2=%%c
REM Difference
set /a h3=%h2%-%h1% & set /a m3=%m2%-%m1% & set /a s3=%s2%-%s1%
REM Time Adjustment
if %h3% LSS 0 set /a h3=%h3%+24
if %m3% LSS 0 set /a m3=%m3%+60 & set /a h3=%h3%-1
if %s3% LSS 0 set /a s3=%s3%+60 & set /a m3=%m3%-1
echo Start : %ST%
echo End : %time%
echo.
echo Total : %h3%:%m3%:%s3%
echo.
pause
my code gives you the running time in milliseconds, up to 24 hrs, it is locale insensitive, and accounts for negative values if code runs through midnight. it uses delayed expansion, and should be saved in a cmd/bat file.
before your code:
SETLOCAL EnableDelayedExpansion
for /f "tokens=2 delims==" %%I in ('wmic os get localdatetime /format:list') do set t=%%I
set /a t1 = %t:~8,1%*36000 + %t:~9,1%*3600 + %t:~10,1%*600 + %t:~11,1%*60 + %t:~12,1%*10 + %t:~13,1% && set t1=!t1!%t:~15,3%
after your code:
for /f "tokens=2 delims==" %%I in ('wmic os get localdatetime /format:list') do set t=%%I
set /a t2 = %t:~8,1%*36000 + %t:~9,1%*3600 + %t:~10,1%*600 + %t:~11,1%*60 + %t:~12,1%*10 + %t:~13,1% && set t2=!t2!%t:~15,3%
set /a t2-=t1 && if !t2! lss 0 set /a t2+=24*3600000
if you want running time in HH:mm:ss.000 format, add:
set /a "h=t2/3600000,t2%%=3600000,m=t2/60000,t2%%=60000" && set t2=00000!t2!&& set t2=!t2:~-5!
if %h% leq 9 (set h=0%h%) && if %m% leq 9 (set m=0%m%)
set t2=%h%:%m%:%t2:~0,2%.%t2:~2,3%
ENDLOCAL
variable t2 holds your running time, you can echo %t2% to display it.
This is a comment/edit to Luke Sampson's nice timecmd.bat and reply to
For some reason this only gives me output in whole seconds... which for me is useless. I mean that I run timecmd pause, and it always results in 1.00 sec, 2.00 sec, 4.00 sec... even 0.00 sec! Windows 7. – Camilo Martin Sep 25 '13 at 16:00 "
On some configurations the delimiters may differ. The following change should cover atleast most western countries.
set options="tokens=1-4 delims=:,." (added comma)
The %time% milliseconds work on my system after adding that ','
(*because site doesn't allow anon comment and doesn't keep good track of identity even though I always use same guest email which combined with ipv6 ip and browser fingerprint should be enough to uniquely identify without password)
Another approach with powershell:
#echo off
for /f %%t in ('powershell "(get-date).tofiletime()"') do set mst=%%t
rem some commands
powershell ((get-date).tofiletime() - %mst%)
this will print the execution time in milliseconds.
If you have CMake installed, you can just run following command.
cmake -E time <the_command_to_measure_run_time>
#echo off & setlocal
set start=%time%
REM Do stuff to be timed here.
REM Alternatively, uncomment the line below to be able to
REM pass in the command to be timed when running this script.
REM cmd /c %*
set end=%time%
REM Calculate time taken in seconds, to the hundredth of a second.
REM Assumes start time and end time will be on the same day.
set options="tokens=1-4 delims=:."
for /f %options% %%a in ("%start%") do (
set /a start_s="(100%%a %% 100)*3600 + (100%%b %% 100)*60 + (100%%c %% 100)"
set /a start_hs=100%%d %% 100
)
for /f %options% %%a in ("%end%") do (
set /a end_s="(100%%a %% 100)*3600 + (100%%b %% 100)*60 + (100%%c %% 100)"
set /a end_hs=100%%d %% 100
)
set /a s=%end_s%-%start_s%
set /a hs=%end_hs%-%start_hs%
if %hs% lss 0 (
set /a s=%s%-1
set /a hs=100%hs%
)
if 1%hs% lss 100 set hs=0%hs%
echo.
echo Time taken: %s%.%hs% secs
echo.
The following script uses only "cmd.exe" and outputs the number of milliseconds from the time a pipeline is created to the time that the process preceding the script exits. i.e., Type your command, and pipe the to the script. Example: "timeout 3 | runtime.cmd" should yield something like "2990." If you need both the runtime output and the stdin output, redirect stdin before the pipe - ex: "dir /s 1>temp.txt | runtime.cmd" would dump the output of the "dir" command to "temp.txt" and would print the runtime to the console.
:: --- runtime.cmd ----
#echo off
setlocal enabledelayedexpansion
:: find target for recursive calls
if not "%1"=="" (
shift /1
goto :%1
exit /b
)
:: set pipeline initialization time
set t1=%time%
:: wait for stdin
more > nul
:: set time at which stdin was ready
set t2=!time!
::parse t1
set t1=!t1::= !
set t1=!t1:.= !
set t1=!t1: 0= !
:: parse t2
set t2=!t2::= !
set t2=!t2:.= !
set t2=!t2: 0= !
:: calc difference
pushd %~dp0
for /f %%i in ('%0 calc !t1!') do for /f %%j in ('%0 calc !t2!') do (
set /a t=%%j-%%i
echo !t!
)
popd
exit /b
goto :eof
:calc
set /a t=(%1*(3600*1000))+(%2*(60*1000))+(%3*1000)+(%4)
echo !t!
goto :eof
endlocal
The answer of driblio can be made a little shorter (though not much readable)
#echo off
:: Calculate the start timestamp
set _time=%time%
set /a _hours=100%_time:~0,2%%%100,_min=100%_time:~3,2%%%100,_sec=100%_time:~6,2%%%100,_cs=%_time:~9,2%
set /a _started=_hours*60*60*100+_min*60*100+_sec*100+_cs
:: yourCommandHere
:: Calculate the difference in cSeconds
set _time=%time%
set /a _hours=100%_time:~0,2%%%100,_min=100%_time:~3,2%%%100,_sec=100%_time:~6,2%%%100,_cs=%_time:~9,2%
set /a _duration=_hours*60*60*100+_min*60*100+_sec*100+_cs-_started
:: Populate variables for rendering (100+ needed for padding)
set /a _hours=_duration/60/60/100,_min=100+_duration/60/100%%60,_sec=100+(_duration/100%%60%%60),_cs=100+_duration%%100
echo Done at: %_time% took : %_hours%:%_min:~-2%:%_sec:~-2%.%_cs:~-2%
::prints something like:
::Done at: 12:37:53,70 took: 0:02:03.55
To the remark of Luke Sampson this version is octal safe, though the task should be completed in 24 hours.
Having Perl installed the hires solution available, run:
C:\BATCH>time.pl "echo Fine result"
0.01063
Fine result
STDERR comes before measured seconds
#!/usr/bin/perl -w
use Time::HiRes qw();
my $T0 = [ Time::HiRes::gettimeofday ];
my $stdout = `#ARGV`;
my $time_elapsed = Time::HiRes::tv_interval( $T0 );
print $time_elapsed, "\n";
print $stdout;
A solution using pure PHP for cmd and one env. variable:
#echo off
setlocal enableextensions
REM set start time env var
FOR /F "tokens=* USEBACKQ" %%F IN (`php -r "echo microtime(true);"`) DO ( SET start_time=%%F )
## PUT_HERE_THE_COMMAND_TO_RUN ##
REM echo elapsed time
php -r "echo 'elapsed: ' . (round(microtime(true) - trim(getenv('start_time')), 2)) . ' seconds' . mb_convert_encoding('
', 'UTF-8', 'HTML-ENTITIES');"
no need for cygwin or non-trusted utilities. Usefull when PHP is locally available
precision and output format can be easily tweaked
the same idea can be ported for PowerShell
Using a sub to return time in hundredths of second
::tiemeit.cmd
#echo off
Setlocal EnableDelayedExpansion
call :clock
::call your_command or more > null to pipe this batch after your_command
call :clock
echo %timed%
pause
goto:eof
:clock
if not defined timed set timed=0
for /F "tokens=1-4 delims=:.," %%a in ("%time%") do (
set /A timed = "(((1%%a - 100) * 60 + (1%%b - 100)) * 60 + (1%%c - 100)) * 100 + (1%%d - 100)- %timed%"
)
goto:eof