I have a situation where my product enumerates to Windows and I can see it and all its sub components.
My problem is that there is a:
USB Connector - HUB - Port 1 - USB Component
Port 2 - USB Component
Port 3 - USB Component
Port 4 - USB Component
At the time of enumeration the USB Components all the look the same. They have a serial number that is programmed into them at manufacture time, but it is not marked on the part. I can open the device by the serial number. What I need to do after I open it, is to find out what hub port the device is on so that I can be sure I opened the proper part. If I have the wrong one I can open the next until I get the proper port. How can I tell which port the open handler is on? I can try IOCTL or SetupDi but I do not know what to look at or what to do with the data when it comes back.
Basically I have an open pipe/handle to a device on a hub, I want to find out what hub port that handle is pointing to.
Any ideas?
Related
I want to get the Device descriptor of USB devices on my system. I am creating a userspace application in Windows(un-managed, native c++ ). From these descriptors, I want to identify billboard devices and parse billboard capability descriptor (parsing bos descriptor).
Here is my approach.
Get USB devices on a system by SetupDiGetClassDevs(&GUID_CLASS_USB_DEVICE,...)
Get device path of each device using SetupDiGetDeviceInterfaceDetail()
Use CreateFile() on device path to get handle to the device.
Issue IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION IOCTL using DeviceIoControl(), and the handle, to get the device descriptor.
I am stuck on the 4th step (getLastError() - Invalid Function).
Other projects (like this sample code from Intel), enumerate all USB controllers on the system, root hubs, ports, and interfaces, and issue IOCTL on the root hub's handle, specifying the port number to which a device is connected.
I do not want to concern myself with the USB hierarchy of the system.
It is less error-prone and easier to get USB devices in the system using setup API. However, nowhere I can see IOCTL being issued to them directly.
Update1
From learn.microsoft.com:
IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION I/O control request retrieves one or more descriptors for the device that is associated with the indicated port index. This request targets the USB hub device (GUID_DEVINTERFACE_USB_HUB). Thus this ioctl which can give me device descriptor of a USB device is meant to be handled by USB Hub, and NOT by a USB device.
Therefore the other solutions pass handle of hub to DeviceIoControl(), as can be seen on Line 68 of the source code from Intel (Linked here).
I instead want to use the handle obtained in step 3 (handle of the device) above to get the device descriptor. So, the IOCTL could be different, or possibly there is a way to get handle of the hub, and index of port to which the device is connected using the handle of the USB device.
The way I see it, device descriptor is an intrinsic property of a USB device, and therefore there must be a way to get it directly from the USB device.
Assuming you already have USB device handle first you need to get DEVPKEY_Device_Driver property string from it (by means of CM_Get_DevNode_PropertyW or SetupDiGetDevicePropertyW).
You'll receive string like {36fc9e60-c465-11cf-8056-444553540000}\0010.
Next you need to iterate over each USB hub in system (devices that have GUID_DEVINTERFACE_USB_HUB interface) and for each:
Open it via CreateFile() call
Call DeviceIoControl(hubInterfaceHandle, IOCTL_USB_GET_NODE_INFORMATION, ...) to get USB_NODE_INFORMATION structure that contains number of USB ports in its hubInfo.u.HubInformation.HubDescriptor.bNumberOfPorts
For each port from 1 (they are one based!!!) to bNumberOfPorts call DeviceIoControl(hubInterfaceHandle, IOCTL_USB_GET_NODE_CONNECTION_DRIVERKEY_NAME, ...) to get unique DriverKey of device connected to this port.
Compare DriverKey string you have on previous step with string you have from DEVPKEY_Device_Driver call. If they are same - congratulations you have found USB hub and port that have your USB device connected!
Now you can call DeviceIoControl(usbHubInterfaceHandle, IOCTL_USB_GET_NODE_CONNECTION_INFORMATION, ...) to get USB_NODE_CONNECTION_INFORMATION structure that contains USB_DEVICE_DESCRIPTOR!
Also you can additionally call DeviceIoControl(usbHubInterfaceHandle, IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION, ...) with USB_DESCRIPTOR_REQUEST to get other USB descriptors in addition to basic USB_DEVICE_DESCRIPTOR.
For example code see EnumerateHubPorts() and GetDriverKeyName() in official USBView sample.
Also I just did that in my RawInputDemo repo here.
UPDATE: There is easier way to get USB device number in a parent USB HUB - just get DEVPKEY_Device_Address property from a USB devnode.
I have been trying to determine if a USB serial port (COM) port is monitored by a system bus driver without success. Basically I have an application that monitors a com port via a filter device driver. I was able to do this after reading this article from the Dr Dobb's magazine. Now what am trying to achieve in a seperate app is to be able to determine if there is an app hooked to a particular com port using a filter device driver. Can anyone help or guide me
I just want to know how to find a usb device is connected to USB3.0 or USB2.0 port in window . I am using c++ and win32 API. please let me know your thoughts.
Based on how your question is phrased, I assume that you know when a device is connected, and need to know if the port it's connected is capable of USB 3.0 speeds.
Take a look at the USB_NODE_CONNECTION_INFORMATION_EX structure, and specifically the field Speed in it, which could correspond to a value defined in the enum USB_DEVICE_SPEED. For USB 3.0, the value of Speed would be UsbSuperSpeed.
The documentation page says that you could use IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX request to obtain information about the connection associated with the indicated USB port.
You may also find the following remarks from the documentation helpful:
If there is no device connected, IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX just returns information about the port.
If a device is connected to the port IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX returns information about both the port and the connected device.
The USB_NODE_CONNECTION_INFORMATION_EX structure is an extended version of USB_NODE_CONNECTION_INFORMATION. The two structures are identical, except for one member. In the extended structure, the Speed member indicates the device speed.
I'd also encourage you to single-step through the usbview project which is part of the windows driver samples available in Github.
i need only to get any voltage out from my laptop to control a relay
how to get a signal from a LAN port from any pin ?
in my laptop there is no com Port or lpt Port
also the usb port needs interfacing circuits which is not nessesary
in my simple project
thats why i choosed the LAN Port
i use (visual basic 6)
any help would much appriciated .
While such things as PoE exist, normal ports do not provide any power to external devices. The USB ports are far more likely candidates since they are designed to support powering external devices, though the amount of current supported varies by adapter/hub (most "ports" are actually internal hub ports).
I'm working on an App that talks to a serial port, and on my development machine, I'm running Vista, and that serial port is a Bluetooth connection. Occasionally, the serial port gets caught in a state where my App can no longer connect to it. In .net I get an IOException with a message reading "Element not found."
I've tried restarting the App, connecting with other Apps (a communications client like HyperTerm) but nothing helps. I can't find any more specific error message, and nothing is logged to the machine's event logs. The device manager tells me the port is "working properly."
Is there any way to find out which process and or .dll has possession of a serial port, and/or force a port closed?
If it makes any difference, my App is in C#, but structurally, it's not convenient to open and close the port with a "using" statement.
Thanks,
Andy
To the best of my knowledge you can't close a serial port that you do not have the handle to. My experience of Bluetooth serial ports is that they can end up getting mapped to different COM port numbers at connection time, and can sometimes leave bogus COM ports when disconnected. For example, I currently have no bluetooth devices connected, but if I go into device manager, I see a total of eleven COM ports listed as Bluetooth serial port The properties on each of these ports show the device as working and available, and I can usually open these ports though I get occasional failures. My work around for this is to force COM port numbers for connected deviced, through properties / advanced / COM port number. I'm not sure if the problem is driver related (IVT corp in this case) or a problem with the way Windows manages blutooth serial ports.
Sorry I couldn't be of any more help.