execute powershell commands with Lua - windows

I have a program that I work with, that has an onboard lua compiler to allow for custom written actions.
Since the tool itself is very limited, especially if it goes for complex reactions over networks, I want to use Powershell over lua.
Methods like os.execute() or io.popen() use the standard command line from windows and not Powershell.
Is there a way to use Powershell with lua?
I tried to write a command line script with the Powershell editor and run this script with os.execute, but it opens it as a textfile, it would be better to write the commands directly in lua but if there is no other way, executing a Powershell script directly would also be fine. (In Windows itself you can execute the script with right mouse "click/Execute with Powershell")


-- You can generate PowerShell script at run-time
local script = [[
Write-Host "Hello, World!"
]]
-- Now create powershell process and feed your script to its stdin
local pipe = io.popen("powershell -command -", "w")
pipe:write(script)
pipe:close()


Your description of the problem makes it sound like you're using a command such as os.execute("powershellscript.ps1"), and that call invokes cmd.exe with your string as the proposed command line. Normally, Windows will open a .PS1 file for editing; this was a deliberate decision for safety. Instead, try altering the os.execute() command to explicitly call PS: os.execute("powershell.exe -file powershellscript.ps1"). If you need to pass parameters to your script, enclose them in {}. See https://msdn.microsoft.com/en-us/powershell/scripting/core-powershell/console/powershell.exe-command-line-help for more info on invoking PowerShell from the command line.

Related

How can I execute Windows commands from Perl without leaving command windows open?

I have a Perl script on Win10 that uses the system() command to run a couple of different command line processes, including:
Start Windows Media Player with a specified .mp3 file.
my $cmd = "start call wmplayer.exe myRadoShow.mp3";
system($cmd);
Start another Perl program that does something else at the same time (specifically reads and broadcasts a set of timecodes and titles).
my $cmd2 = "secondScript.pl some_params";
system($cmd2);
All of this works correctly; the minor problem is that #1 above starts up a new command line window each time it executes the system($cmd) command. I have to later go back and close those windows.
If I don't use "start call" the Perl script doesn't continue to #2.
Is there a preferred way to execute #1 that doesn't leave these windows open?
I realize this question may be more about Windows commands than Perl.

Firstly, If youre using active perl versions, there is a wperl.exe you can call your script with instead of the default perl.exe. Not to sure if this will hide sub processes created by your script but you can give it a go.
If that doesnt work, then maybe you can use Win32::GUI:
use Win32::GUI;
my $hw = Win32::GUI::GetPerlWindow();
Win32::GUI::Hide($hw);
there are other modules that provide this functionality as well. Good luck!

simulate keyboard input to batch file via file and pipe on windows

the title might be slightly confusing but what I need is a method to hand over pre-configured parameters to a batchfile on windows commandline.
The batchflie executes several progams (openssl) that need interactive input. To avoid this, I wrote all necessary input parameters to a textflie and now try to do something like:
type parameters.txt | mybatchfile.bat
Unfortunately this doesn't work.
Is there a way to do this?

Passing text into stdin of interactive prompts of console programs sometimes works, but needs to be done on single line of specific program. Tested way for SSH communication in batch file:
some batch code
echo n| plink.exe -pw "somepassword" root#somehost someremotecommand
some batch code
https://the.earth.li/~sgtatham/putty/latest/w32/plink.exe

How can I keep powershell in repl mode with a loaded script

I'm trying to start a powershell instance, that loads a script and remains open so I can still call methods loaded by that script manually.
I'm trying to dot source a script and pipe it to powershell like below, from a cmd instance/batchfile:
echo . .\script.ps1 | powershell
The result in this case is that powershell starts, loads my script, executes it and exits. I've tried running with -noexit argument, it has no effect.
I'm thinking of another option, to start a powershell process and pipe my dot source command to its stdin - but this probably won't allow me to interact with the process anymore because its stdin is opened by the host process.

If you need to run a script file so that window stays open and variables are accessible after the execution.
Try dot sourcing the script file like this:
powershell -noexit ". .\script.ps1"
Once the script is done, you can access any internal variable the script defined. Assuming the variables are at the script level scope.

Run a simple shell command

What is the best WinAPI function to use when you only want to run a simple shell command like hg > test.txt?

To simply run a file, then ShellExecute() and CreateProcess() are the best options.
As you want to redirect output to a file/run a shell command, it complicates things...
Output redirection is a feature of the command prompt, and as such, the command you want to run needs to be passed to cmd.exe (on NT/XP+) passing /c and your command as the parameters (either ShellExecute or CreateProcess will do).
cmd /c "ipconfig >c:\debug\blah.txt"
The best way however is to use CreateProcess() and create your own pipes to talk to the stdin and stdout of the program (This is all cmd does internally)

You could use ShellExecute(), but why not try system() first? I am not so sure that ShellExecute() can actually do piping or redirection. There is also CreateProcess(), but that requires a bit more work. CreateProcess() gives you the best control, though.

There are two ways of issuing commands: the Windows Shell way, and the command line way.
Windows Shell issues commands by executing verbs on files. Verbs are associated with file types in the registry. Examples of common verbs are Open and Print. The WinAPI to use for this is ShellExecute. Windows Shell does not help you pipe the output of a process to a file. You can do it using CreateProcess, but it is a little bit involved.
The command line way is to use the system function.

Powershell script gets stuck, doesn't exit when called from batch file

I have a PowerShell script that connects to a web site, and parses its returned data (It's about importing a previously uploaded SQL file into the web site's data base). The PowerShell script uses wget, something I may replace by a native function later.
The import process is embedded in a script that is executed by a 3rd party program called scriptFTP.
The script runs fine when I call it from a single .bat file like so:
powershell "& "C:\data\etc\run_import_script.ps1"
exit %ERRORLEVEL%
However, when I call this .bat file from within the greater ScriptFTP context, the following happens:
The PowerShell script is executed. I confirmed this my sending myself an E-Mail each time the remote import script got called.
PowerShell doesn't seem to exit, and script execution gets stuck. I can still cancel the whole thing using Ctrl+C but the following commands never get executed.
When I change the batch file to the following:
start powershell "& "C:\data\etc\run_import_script.ps1"
exit %ERRORLEVEL%
it works, running the PowerShell script in a new console, but I can't grab the error level that PowerShell returns.
I have tried calling PowerShell from ScriptFTP directly, bypassing the batch file, but with the same result: It just gets stuck.
Any output I have the PowerShell script do using Write-Output or Write-Host is not displayed.
All programs run under the same user, me.
Does anybody have any ideas what to do?

This variant might work for you.
powershell -NoProfile -Command "C:\data\etc\run_import_script.ps1; exit $LASTEXITCODE" < NUL
Taken from http://thepowershellguy.com/blogs/posh/archive/2008/05/20/hey-powershell-guy-how-can-i-run-a-powershell-script-from-cmd-exe-and-return-an-errorlevel.aspx

From my experience, PowerShell.exe can easily run scripts from within a batch file or shell script in a predictable way using the -File switch. One does not need to use the Start command.
The important thing to do is to append
< nul
to the command line from within a batch file. My research has shown that PowerShell runs the commands in the script indicated through the -File switch and then waits for additional PowerShell commands from the standard input (my brief experimentation with the -Command switch demonstrated similar behavior). By redirecting the standard input to nul, once PowerShell finishes executing the script and "reads end-of-file" from the standard input, PowerShell exits.
When invoking PowerShell from Cygwin, use
< /dev/null
For example, I've run PowerShell scripts from Cygwin using shell variables, like this:
PowerShell.exe -ExecutionPolicy RemoteSigned -File $_powershellscriptpath $_firstscriptparameter < /dev/null
Please post a comment if your experience varied from mine.
- Gordon

Try adding the /WAIT parameter. It will keep the .bat waiting until the PowerShell script completes.
START /WAIT powershell "& "C:\data\etc\run_import_script.ps1"

We had a similar issue. We wanted to call a powershell app from a piece of software that just had a box to enter "Command" and "Parameters" but although the powershell ran successfully (I could see the affected file updated.)
Finally my coworker helped me figure it out
Command needs to be:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
And Parameters:
-ExecutionPolicy unrestricted -Command "& {C:\scripts\apps\EDI\Test.ps1; [Environment]::Exit(1)}"
In our case it was important to use [Environment]::Exit(1) rather than Exit 1. I believe Exit was simply terminating the script, not closing Powershell itself.

If you want to capture the output of the powershell.exe commands then you can also use the /B parameter to force the process to run in the same command shell.
We've just seen a very odd instance of this problem. A batch file containing the call powershell.exe -command ... ran fine locally but stalled as described above when the batch file was run in the context of an msdeploy -postSync command. After experimenting with process.Kill() to force PowerShell to quit, we lit on the use of START /WAIT /B PowerShell.exe ..
No idea why this should work, but it does ...

IF that is exactly what's in your file it's because you have mismatched quotes. Powershell is waiting for the last quote.

PowerShell has, at least what I consider, strange behavior when being invoked in this manner. In short, it doesn't treat the command line arguments being passed to powershell.exe as scripts to run. Instead, it treats them as command to run. This is because the default for powershell.exe is -command - see powershell.exe /? for additional info.
C:\>powershell "'Hello'"
Hello
What you will need to do, is construct a clever input string to "source" the script you wish to run:
C:\>powershell ". .\test.ps1"
Hello, World!
As for the output, once you get the script running correctly, it should just be a matter of capturing STDOUT or whatever ends up fitting with your script.
Full Example
test.bat
#echo off
powershell.exe ". .\test.ps1"
test.ps1
"Hello, World!"
Invoke the command:
test.bat > test.txt
And verify the output was captured:
C:\>type test.txt
Hello, World!

The problem I bet is that the Powershell process continutes to run after executing the script. This means it has not exited and therefore there is no exit code. I'm having a similar problem when trying to run a Powershell script from C# that does stuff when finished, except it never finishes...
Hacky, but the only solution I've found is to put Stop-Process -processname powershell at the end of the .ps1 script. This kills off the PowerShell process (and all PowerShell windows you have open unfortunately) but seems to work. Might work for your script as well.

I had the exact issue, we were trying to integrate power shell scripts into another system and it kept giving a timeout error. Probably because of the issue mentioned by Gordon Smith, his solution might work. But to me I prefer to have complete control of my script from within the script itself and not depend on the way in which it is called.
$pid is built in variable with the PID. The below will end the current powershell process and leave the others intact. This way anyone can call your script as normal and it will work as expected.
Stop-Process $pid

you can simply add an 'exit' command to the end of the .ps1 script (or any variant of process termination that you wish). Powershell will continue to run at the end of the script as it has not been told to terminate (when run in PS or ISE it will auto-terminate at the end of the script but not when run through the DOS shell).

Resources